You are not logged in. Please login or register.
=============================================
First Of all , Thanks too much for all Participating in this great Project
=============================================
I downloaded DP_Graphics_B_wnt5_x86-32_707test2.7z two times
But MD5 Is Incorrect
Last edited by waleed_wwn (2007-07-28 14:34:33)
I downloaded DP_Graphics_B_wnt5_x86-32_707test2.7z two times
But MD5 Is Incorrect
You are correct, but there's nothing to be alarmed about. Jaak (jtdoom) modified my original DP and re-uploaded using the same file name (fixed an Intel issue).
Thank you for pointing that out.
Updated MD5 and changlog for G_B test2
@Team members: This is why it's important to post MD5 hashes with your links.
Last edited by mr_smartepants (2007-07-28 20:54:20)
First post updated. I finally got it uploaded.
Graphics_A 7.07test2
Link Disabled for 7.09 release.
MD5: 4B4C1104D74736B32AF6C556D75B4676
Size: 94.4 MB
Changelog:
D\G\A\1 Updated to Catalyst 7.7 (Driver & ATICCC), ATICCP updated to 6.14.10.5154 (mr_smartepants)
Rewrote mobility.inf to support new HWIDs/chipsets. Optimized and validated code line-by-line. Removed all HWIDS for 9200 series and below. (mr_smartepants)
D\G\N\1 Updated nv4_go.inf to fix stall at T-34 (mr_smartepants)
D\G\N\5 Updated to WHQL version 162.18, 06/29/2007(mr_smartepants)Last edited by mr_smartepants (2007-09-08 00:26:32)
First post updated
Graphics_B 7.07test2
Link Disabled for 7.09 release.
MD5: D36FAD662F3BF9757E95B6A77CB083C5
Size: 53 MB
Changelog:
-G\A\C\ ATI Rage XL Deleted/redundant to G\A\B (Ruud)Last edited by mr_smartepants (2007-09-08 00:26:56)
First post updated
Graphics_A 7.07test3
Link Disabled for 7.09 release.
MD5: 622105DDF0C4148A44E75F1A1061F29A
Size: 68.1 MB
Changelog:
D\G\A\1 Updated to Catalyst 7.7 (Driver & ATICCC), ATICCP updated to 6.14.10.5154 (mr_smartepants)
Rewrote mobility.inf to support new HWIDs/chipsets. Optimized and validated code line-by-line. Removed all HWIDS for 9200 series and below. (mr_smartepants)
D\G\N\1 Updated to unified WHQL version 162.18, 06/29/2007(mr_smartepants)
D\G\N\2 through 5 Deleted, all nVidia cards covered by G\N\1\ (mr_smartepants)Last edited by mr_smartepants (2007-09-08 00:27:19)
Hi !
One comment towards the Graphics_A 7.07test3 build. I recently integrated this version for a Windows XP install CD for a friend of mine who had built a new PC using a GF 8600 card. He now told me that the videocard drivers were installed but the card was marked with a yellow exclamation mark afterwards in the device manager. A reinstall of the driver solved the problem.
Unfortunately I do not have any access to the system and I also don´t have any logs, nor do I have an NVIDIA card to test it with but I thought I´d let you know ...
Thanks !
Alex
Hi....
Dunno if its too late to report a test, but I have tested the following machines/graphics adapters and they worked fine:
Dell Optiplex 745 with Radeon X1300/X1550 Series 256MB
Dell Optiplex GX620 with Radeon X600/X550 Series 256MB
HTH.
Chris.
Thank you both. Feedback is a very important part of how we improve these driverpacks.
@midiboy. If you do get access to that particular machine, can you retrieve the dpfinisher log and/or the HWIDs.
@cwbshaw. That's great news.
Thank you both for testing.
No problem.....
I forgot to mention one thing that seemed odd, but didn't affect the functioning of the machine or the drivers. I noticed that beside the clock on the taskbar there were 2 ATI logo icons.....they had different menus.....I have a small screen capture which I can post if you like. How do you add an image as an attachment to a post?
Anyway, not sure if any of this matters.
Chris.
How do you add an image as an attachment to a post?
You can't.
You need to upload them to an external host (imageshack.us works very well for me!), then use IMG appear.
Anyway, are you sure you didn't also use an AddOn for, say, ATi Tray Tools?
A screenshot would indeed be nice to identify them.
Is one of them the old-style and the other the new logo?
(old one is T and I are "merged" and new one is sparated letters)
Hi....
OK....here are the images:
AFAIK I didn't opt to install any ATI Tray Tools or anything like that.
HTH.
Chris.
Not showing up for me.
With ImageShack, please make sure to post the "direct link" (it's the last one in the row of links presented) so that we can directly see the image here, no strange thumbnail or redirector.
ALWAYS use the direct link, no matter what (that's my personal rule, anyhow).
Anyway, with the BASE, you got to decide for either the CCC or the CP.
Check out the options, it's there 
Hi....
Apologies....it took me a while to find the direct link....I had to go to classic view. Anyway, hopefully these will display:
As regards the DPs_BASE options, I always use the CCC option.....here is how I make my image:
1. Copy unpatched XP CD to HD
2. Integrate SP2, RyanVM and a Codec pack using nLite
3. Add all driverpacks (including some 3rdparty) using DPs_BASE
....and thats it.
Anyway, hope you see the images above.
HTH.
Chris.
AFAIK I didn't opt to install any ATI Tray Tools or anything like that.
Can you check your %CDROM%\OEM\ folder for these files:
ATICCC.ins
ATICCP.ins
If both files are present, there's your problem. Just delete the one you don't want (CCC vs CCP).
Apart from that, I don't know. Can you try integrating with a fresh source? Maybe there's an old setting from a previous integration that didn't get deleted.
The left symbol is the newer CCC, the right one is the oldish CP.
Apart from what Erik told you, I have no further clue myself.
Could it be you are using an older secondary ATi card in this system along with a newer (Radeon-line) one?
Maybe it's a deactivated on-board card (Rage XL for a chance)?
Something must be triggering the CP installation, and if you selected CCC in the base, that could only be a pre-Radeon card (which the CCC does not support)...
SUCCESS! 
Card Tested:
nVidia 8800GTS 320Mb
Driverpacks:
DP_Graphics_A_wnt5_x86-32_707test3.7z ---> 66.5 MB (69,758,567 bytes)
DP_Graphics_B_wnt5_x86-32_707test2.7z ---> 51.7 MB (54,302,776 bytes)
DP_Graphics_C_wnt5_x86-32_706.7z ---> 63.9 MB (67,091,875 bytes)
I also slipstreamed in the MassStorage pack too but that was the only additional driverpack.
I did see this pop up:
I cannot be 100% certain this pop-up was caused by the graphics drivers, but the installation of Windows
I used was very heavily stripped - I used this almost driver-less install on purpose just so the installation
of Windows really only had the 7z driverpacks. I can't be 100% though because it could have been my
sound card (onboard sound, native Windows drivers) although I have never had this popping up before
so I will assume it was the GeForce drivers causing the pop-up.
Other than the above pop-up, everything went flawlessly. I had the nVidia Control Panel there and the
nice NEW icon in the System Tray.
First post updated.
Link Disabled for 7.09 release.
MD5: E7D0B5CCE8B61AED2A212CB991F78110
Size: 74.1 MB
Changelog:
D\G\A\1 Updated to Catalyst 7.8 (Driver & ATICCC), ATICCP updated to 6.14.10.5154 (mr_smartepants)
Rewrote mobility.inf to support new HWIDs/chipsets. Optimized and validated code line-by-line. Removed all HWIDS for 9200 series and below, supported by Graphics_B. (mr_smartepants)
D\G\N\1 Updated to unified WHQL version 162.18, 06/29/2007(mr_smartepants)
D\G\N\2 through 5 Deleted, all nVidia cards covered by G\N\1\ (mr_smartepants)Last edited by mr_smartepants (2007-09-08 00:28:27)
mr_smartepants I tested the updated pack and this also works,
same result as the last test, on nVidia 8800GTS.
Still got that pop-up though (asking for a reboot)
Hi....
The left symbol is the newer CCC, the right one is the oldish CP.
I checked the OEM folder and all that is there is ATICCC.ins.
Could it be you are using an older secondary ATi card in this system along with a newer (Radeon-line) one?
Maybe it's a deactivated on-board card (Rage XL for a chance)?
The machine itself has a Radeon X600/X550 256Mb card AND it has an onboard port at the back of the machine......but the oboard port is covered over so it can't be used and the BIOS Video settings are set to Auto. Below is the output from save_hwids which doesn't show anything except the Radeon Primary and Secondary (it is a dual head card):
===========
PCI devices
===========
PCI\VEN_1002&DEV_5B62&SUBSYS_0B021002&REV_00\4&1603E009&0&0008: Radeon X600/X550 Series
PCI\VEN_1002&DEV_5B72&SUBSYS_0B031002&REV_00\4&1603E009&0&0108: Radeon X600/X550 Series Secondary
PCI\VEN_11C1&DEV_5811&SUBSYS_80101028&REV_61\4&5855BE9&0&00F0: OHCI Compliant IEEE 1394 Host Controller
PCI\VEN_14E4&DEV_1677&SUBSYS_01AD1028&REV_01\4&117729E2&0&00E0: Broadcom NetXtreme 57xx Gigabit Controller
PCI\VEN_8086&DEV_244E&SUBSYS_00000000&REV_E1\3&172E68DD&0&F0: Intel(R) 82801 PCI Bridge - 244E
PCI\VEN_8086&DEV_2770&SUBSYS_00000000&REV_02\3&172E68DD&0&00: Intel(R) 945G/GZ/GC/P/PL Processor to I/O Controller - 2770
PCI\VEN_8086&DEV_2771&SUBSYS_00000000&REV_02\3&172E68DD&0&08: Intel(R) 945G/GZ/GC/P/PL PCI Express Root Port - 2771
PCI\VEN_8086&DEV_27B8&SUBSYS_00000000&REV_01\3&172E68DD&0&F8: Intel(R) 82801GB/GR (ICH7 Family) LPC Interface Controller - 27B8
PCI\VEN_8086&DEV_27C0&SUBSYS_01AD1028&REV_01\3&172E68DD&0&FA: Intel(R) 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller - 27C0
PCI\VEN_8086&DEV_27C8&SUBSYS_01AD1028&REV_01\3&172E68DD&0&E8: Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8
PCI\VEN_8086&DEV_27C9&SUBSYS_01AD1028&REV_01\3&172E68DD&0&E9: Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9
PCI\VEN_8086&DEV_27CA&SUBSYS_01AD1028&REV_01\3&172E68DD&0&EA: Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA
PCI\VEN_8086&DEV_27CB&SUBSYS_01AD1028&REV_01\3&172E68DD&0&EB: Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB
PCI\VEN_8086&DEV_27CC&SUBSYS_01AD1028&REV_01\3&172E68DD&0&EF: Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC
PCI\VEN_8086&DEV_27D0&SUBSYS_00000000&REV_01\3&172E68DD&0&E0: Intel(R) 82801G (ICH7 Family) PCI Express Root Port - 27D0
PCI\VEN_8086&DEV_27D2&SUBSYS_00000000&REV_01\3&172E68DD&0&E1: Intel(R) 82801G (ICH7 Family) PCI Express Root Port - 27D2
PCI\VEN_8086&DEV_27DA&SUBSYS_01AD1028&REV_01\3&172E68DD&0&FB: Intel(R) 82801G (ICH7 Family) SMBus Controller - 27DA
PCI\VEN_8086&DEV_27DE&SUBSYS_01AD1028&REV_01\3&172E68DD&0&F2: SoundMAX Integrated Digital Audio
PCI\VEN_8086&DEV_27DF&SUBSYS_01AD1028&REV_01\3&172E68DD&0&F9: Intel(R) 82801G (ICH7 Family) Ultra ATA Storage Controllers - 27DF
19 matching device(s) found.
===========
USB devices
===========
USB\ROOT_HUB\4&19F1AF77&0 : USB Root Hub
USB\ROOT_HUB\4&2F60F7EA&0 : USB Root Hub
USB\ROOT_HUB\4&32C41A52&0 : USB Root Hub
USB\ROOT_HUB\4&4FC3F26&0 : USB Root Hub
USB\ROOT_HUB20\4&4F1A976&0 : USB Root Hub
USB\VID_0461&PID_4D15\5&345F6DD7&0&1 : USB Human Interface Device
USB\VID_413C&PID_2005\5&345F6DD7&0&2 : USB Human Interface Device
7 matching device(s) found.Could it be that the fact that the card is dual-head is the cause?
BTW.....this never happened until I tested the new Graphics driverpacks.
On a somewhat unrelated item, I noticed someone submitting a test report for a non-ATI card using the new Graphics driverpacks.....I had thought that you really only needed tests on ATI cards.....I do have other non-ATI cards I can test.....would it be helpful to submit reports on these?
HTH.
Chris.
Could it be that the fact that the card is dual-head is the cause?
Don't think so, but I have yet to test on mine...
Never was a problem in the past but then you said it just surfaced now.
On a somewhat unrelated item, I noticed someone submitting a test report for a non-ATI card using the new Graphics driverpacks.....I had thought that you really only needed tests on ATI cards.....I do have other non-ATI cards I can test.....would it be helpful to submit reports on these?
We're glad about any hardware you can test the packs on!
In this case, ATi was specifically requested because there were some serious problems reported.
As for DriverPack Graphics A, the only other HW to test on would be nVidia.
You can, however, test all the other DriverPacks on your hardeware, too, if you don't mind!
And last but not least, if you are really interest in this, I'm sure there are still open potitions on the official Testers group
That way you will get access to ALL test versions, not just the few we publically posted.
Just drop Bâshrat the Sneaky a note and he'll get you in
First post updated.
Link Disabled for 7.09 release.
MD5: C0F3D21C282473D9DD6040001BEC5DE9
Size: 80.6 MB
7.08test2 Changelog:
D\G\A\1 Updated to Catalyst 7.8 (Driver & ATICCC), ATICCP updated to 6.14.10.5154 (mr_smartepants)
Dual ATICCC installers (desktop/mobility), recommend KTD enabled until finisher .ini is fixed (double-click appropriate ATICCC if not installed at startup).
D\G\N\1 Updated to unified WHQL version 162.18, 06/29/2007(mr_smartepants)
D\G\N\2 through 5 Deleted, all nVidia cards covered by G\N\1\ (mr_smartepants)Things to fix (known problems):
.ini handling of dual ATICCC installers.
G_B .ini needs to reflect new ATICCCd.exe installer
Last edited by mr_smartepants (2007-09-08 00:29:13)
Tried to follow URL in 1st post to pickup G B lastest and see the following 403 error:
The requested URL /driverpacks_nightlies/DP_Graphics_B_wnt5_x86-32_708test2.7z was not found on this server.
Additionally, a 403 Forbidden error was encountered while trying to use an ErrorDocument to handle the request.
DriverPack Graphics A (actually "B" in URL):
http://dev.driverpacks.thesneaky.com/dr … 08test2.7z
Ooops, sorry.
First post fixed.
I have tested all test graphics pack
On Dell D600 Ati Radeon Mobilty 9000 Missing in mobility.inf
"ATI MOBILITY RADEON 9000" = ati2mtag_M9, PCI\VEN_1002&DEV_4C66&SUBSYS_01BE1028
"MOBILITY RADEON 9000" = ati2mtag_M9, PCI\VEN_1002&DEV_4C66&SUBSYS_011D1028
"MOBILITY RADEON 9000 " = ati2mtag_M9, PCI\VEN_1002&DEV_4C66&SUBSYS_011E1028
OK on ATI Xpress 1150
Ok on Dell D520
Ok on Compaq nc6120
Powered by PunBB, supported by Informer Technologies, Inc.
Currently installed 3 official extensions. Copyright © 2003–2009 PunBB.
[ Generated in 0.022 seconds, 10 queries executed ]