You are not logged in. Please login or register.
DriverPacks.net Forum » Posts by cdob
I use AHCI. No RAID.
NVIDIA nForce Serial ATA Controller
PCI\VEN_10DE&DEV_03F6&CC_0101
That's IDE emulation mode still.
Idea, delete [N7]
PCI\VEN_10DE&DEV_0266&CC_0101,PCI\VEN_10DE&DEV_0267&CC_0101,PCI\VEN_10DE&DEV_037F&CC_0101,PCI\VEN_10DE&DEV_03F6&CC_0101Does work here at PCI\VEN_10DE&DEV_03F6&CC_0101:
Textmode use pciide.sys, PNP loads nvgts.sys at guimode.
I boot w ???-Windows
No Warez support.
Alternately you could have configured (added) Mass storage from PeBuilder plugins page as described in the lower part of the tutorial.
There is no Base included in UBCD4Win currently. Back then there was a update in advance and old Base was not included.
Hence you have to download current Base first.
Try current DriverPacks first.
Backup folder plugin\DriverPacks.net, delete folder plugin\DriverPacks.net
Follow section "All versions of BartPE"
http://users.telenet.be/jtdoom/basetute … lpFile.htm
I have added this line to sysprep:
PCI\VEN_8086&DEV_27C0&CC_0106="C:\D\M\I5\ich78id2.inf"&CC_0106 - I have no idea what this part of the code is
CC_0106 refers to AHCI mode.
However your SATA controller uses IDE mode CC_0101
Try
PCI\VEN_8086&DEV_27C0&CC_0101="C:\D\M\I5\ich78id2.inf"
PCI\VEN_8086&DEV_27C0="C:\D\M\I5\ich78id2.inf"
hangs on a black screen on boot?
Which messages do you get at all?
In SAFE MODE it hangs when displaying file: agpCPQ.sys
Compare http://support.microsoft.com/default.as … -us;324764
Set service agpCPQ.sys disabled start=4
You don't need a driver for a hard disk.
Windows provide proper drivers for hard disks by default.
Contrary add driver for mass storage CONTROLLER.
Try current DriverPack MassStorage.
that is true, device was enabled, booted with uncd4win and the os (ubce4win) did b=not see it.
But did devcon list a relating HardwareID?
So far it's a BIOS issue first. There have to have a HardwareID first.
Dosn't use a Poweredge 1800 a XEON cpu? That's not a Core2Duo.
List Poweredge 1800 HardwareIDs.
Continue 1:
Back to Pack 3 and original setupreg.hiv, no hiveBTS.inf:
Textmode does detect striped disk.
Files are copied to hard disk. Reboot to GUI mode.
PNP dosn't detect a PCI\VEN_10DE&DEV_03F6&CC_0104.
Reboot: BSOD 0x7b.
Next \OEM\ files replaced: 11.09
http://www.nvidia.com/object/nforce_nf4 … 11.09.html
Installation does complete.
Used MatchingDeviceId: "pci\\ven_10de&dev_03f6&cc_0104", "*nvraidbus" and "gennvraiddisk".
Read:
Driver pair nvatabus and nvraid use HardwareID *nvraidbus.
Driver pair nvgts and nvrd32 use HardwareID *nvraidbus too.
*nvraidbus goes to both driver pairs: which setting goes to txtsetup.sif?
Continue 2: the fun starts, testing a experimental approach
Textmode files from Pack 3 still: nvatabus and nvraid
\OEM\ files replaced: 15.45 nvgts and nvrd32
http://www.nvidia.com/object/nforce_winxp_15.45.html
Textmode load drivers nvatabus and nvraid.
Gui mode PNP load drivers nvgts and nvrd32.
Installation does complete. Machine does work.
All four services nvatabus, nvraid, nvgts and nvrd32 are set to boot start=0.
Two 80GB hard disks striped to one 160GB disk at nForce630a:
DP_MassStorage_wnt5_x86-32_1102nt19.7z no disk found.
Do you like another [BusExtenders.Load] or [BusExtenders.Load] [SCSI.Load] entries?
Next step, same driver files still:
PnpInterface added to setupreg.hiv:
Disk is found at textmode. Files are copied to disk.
BSOD 0x7b at first reboot. Registry dosn't contain nvgts PnpInterface.
Next step:
PnpInterface added to setupreg.hiv. And PnpInterface set at hiveBTS.inf, txtsetup.sif adjusted.
Slightly similar to http://forum.driverpacks.net/viewtopic. … 151#p32151
Installation does finish.
ACPI\NVRAIDBUS\3&267A616A&0
Name: NVIDIA nForce RAID Controller
Hardware ID's:
ACPI\NVRAIDBUS
*NVRAIDBUSPCI\VEN_10DE&DEV_03F6&SUBSYS_03F61849&REV_A2\3&267A616A&0&40
Name: NVIDIA nForce Serial ATA Controller
Hardware ID's:
PCI\VEN_10DE&DEV_03F6&CC_0104SCSI\ARRAY&VEN_NVIDIA&PROD_RAID_DISK&REV_\4&3223CD61&0&000
Name: NVIDIA nForce RAID Device
Hardware ID's:
NVIDIA__Raid_Disk________SCSI\ARRAY&VEN_NVIDIA&PROD_RAID_DISK&REV_\4&3223CD61&0&110
Name: NVIDIA nForce RAID Device
Hardware ID's:
NVIDIA__Raid_Disk________SCSI\DISK____NVIDIA__STRIPE___149.05G\1
Name: NVIDIA STRIPE 149.05G
Hardware ID's:
SCSI\Disk____NVIDIA__STRIPE___149.05G
GenDisk
HardwareIDs *NVRAIDBUS, PCI\VEN_10DE&DEV_03F6&CC_0104 and NVIDIA__Raid_Disk________ are used from nforce drivers.
This is from the HWID text file:
PCI\VEN_1002&DEV_439C&SUBSYS_84431043&REV_40\3&267A616A&0&A1
Name: Standard Dual Channel PCI IDE Controller
PCI\CC_0101
That's IDE emulation mode at BIOS.
A plain XP Installation CD does support this. No need to add drivers.
Change BIOS settings, if you like AHCI or RAID.
I downloaded a set of nautis drivers, but they were 64-bit only, again.
I could try my hand and a custom set.
There are Windows 7 32-bit drivers.
However a notebook relating driver fails at another notebook.
Most likely a m11x patched version is required.
A description and examples.
http://forum.notebookreview.com/sony/34 … phics.html
My next preference would be switchable graphics in windows 7 32-bit as I can already download 64-bit drivers
Hybrid Graphics drivers are supported by notebook manufacturers only.
Ask the notebook manufacturer about windows 7 32-bit drivers.
Or try modded drivers at own risk.
http://forums.laptopvideo2go.com/forum/ … s-drivers/
Dell: ftp://ftp.us.dell.com/video/nVidia_Gefo … 273113.exe
NVCADM.inf
[NVIDIA_SetA_Devices.NTamd64.6.1]
%NVIDIA_DEV.0CAF.01% = Section010, PCI\VEN_10DE&DEV_0CAF&SUBSYS_04431028
%iCNTG0.0% = iCNT0, PCI\VEN_8086&DEV_2A42&SUBSYS_04431028
One *.inf file supports Intel and Nvidia graphics.
Are there any driver files, used at hybrid mode only?
Are there any hybrid graphics registry settings?
Does SUBSYS_04431028 refers to hybrid graphic card only?
Nvidia, Supported products: http://www.nvidia.com/object/notebook-w … river.html
Notebooks supporting Hybrid Power technology with Intel chipsets are not supported by this release.
nvct.inf
%NVIDIA_DEV.0CAF.01% = Section006, PCI\VEN_10DE&DEV_0CAF&SUBSYS_04431028
That's the same HardwareID.
Nice:
a nvidia generic laptop driver use a hybrid HardwareID
and the hardware is not supported official
Overall: hybrid graphic card testing is required
"CPQ32FS2.sys" is renamed to symc8xx (over writing it)
symc810 and sym_hi are removed completely
Can you adjust BASE BartPE part too?
Add
[DelLine]
"txtsetup.sif", "SCSI.Load", "symc810"
"txtsetup.sif", "SCSI.Load", "sym_hi"
Are options 1 and 2 even possible from an x64 PE 3.
I've no idea. Never tried this.
vbs should work (1), however dism.exe behaviour is unclear (2).
I guess I should do some trial and error.
Yes, do this. Write log files too.
I use InfCacheBuild.
Does driver *.inf contain CopyFiles lines at your BartPE?
But why this old drivers works in BartPE without any "bad" windows?
Does old driver does not use CoDeviceInstaller?
Does new driver use CoDeviceInstaller?
I used pebuilder 3.1.10a
Use InfCacheBuild too http://www.911cd.net/forums//index.php?showtopic=21226
I run the tests is also my business machine
Thanks a lot, that's very kind of you. I appreciate this conditions.
Actually test pack #3 only uses nvatabus.sys in the .ini.
Dosn't section [Nt] refers both driver files?
As an aside, can I slipstream one of the working test MassStorage packs into BartPE (for UBCD4Win) and see what that produces when built?
Test MassStorage pack #3 should work.
So to be clear, I want to SATA-future-proof an XP install disc for at least the next 20 years.
That's simple, as simple as Perpetual Motion 
@clockman
Can you clarify:
How many and which hard disks do you use?
Do you use hard disks at RAID configuration?
To which controller are attached hard disks?
Do you boot from CD/DVD? Which one and which controller?
PCI\VEN_10DE&DEV_03EC&SUBSYS_82341043&REV_A2\3&267A616A&0&30
Name: Standard Dual Channel PCI IDE Controller
PCI\VEN_10DE&DEV_03EC&CC_0101PCI\VEN_10DE&DEV_03F6&SUBSYS_82341043&REV_A2\3&267A616A&0&40
Name: NVIDIA nForce Serial ATA Controller
PCI\VEN_10DE&DEV_03F6&CC_0104PCI\VEN_10DE&DEV_03F6&SUBSYS_82341043&REV_A2\3&267A616A&0&41
Name: NVIDIA nForce Serial ATA Controller
PCI\VEN_10DE&DEV_03F6&CC_0104PCI\VEN_1191&DEV_8040&SUBSYS_80401191&REV_02\4&25700A26&0&4020
Name: SCSI Controller
PCI\VEN_1191&DEV_8040&CC_0100
In addition:
Did nvgts.sys run at creating HardwareID?
Does nvgts.sys create HardwareID "SCSI\ArrayNVIDIA__Raid_Disk___________" ?
Pack 3= success
This uses nvatabus.sys and nvraid.sys.
Which HardwareIds do you get running nvatabus.sys?
Do you get HardwareID "SCSI\ArrayNVIDIA__Raid_Disk___________" still ?
When I extract "DP_LAN_wnt5_x86-32_10111.7z" file at "D:\pebuilder\drivers\Net".
"DP_MassStorage_wnt5_x86-32_1011.7z" file at "D:\pebuilder\drivers\SCSIAdapter"
Do NOT do this. That's not supported.
And try to DriverPack Sound B \ D \ S \ I12 \ STHDA.INF everything is installed properly does not give any error but does not work echo the application detects when I plug the headphones to the audio input jack on the notebook but not hear any applications say the driver does not work.
Driver itself does work, but at false configuration.
A idea:
Not tested, no relating hardware.
Edit sthda.INI, add your HardwareID.
Some entries match "HDAUDIO\FUNC_01&VEN_111D&DEV_7605&SUBSYS_103C14"
Try this one first.
Example
[Models]
HDAUDIO\FUNC_01&VEN_111D&DEV_7605&SUBSYS_103C1404=92XXM7-3.INI
HDAUDIO\FUNC_01&VEN_111D&DEV_7605&SUBSYS_103C148B=92XXM7-3.INI
92XXM7-3.INI is one eample. Try all *.ini files step for step.
And read all *.ini files. Some contain HardwareID too.
Astonishing, IDT driver configuration are worse than Nvidia.
Which HardwareID relate to your machine? Use menitoned "HWID's Tool"
Interesting, the newest DriverPacks has one driver with the same HWIds but different name. It doesn't work though with my PowerEdge T110.
It's a XP driver.
Do you use XP or 2003 windows files?
there is no txtsetup.oem -file provided with the driver?
It's a Windows 2008 driver?
What about a 2003 driver?
ftp://ftp.us.dell.com/SAS-RAID/DELL_MUL … 244918.exe
DriverPacks.net Forum » Posts by cdob
Powered by PunBB, supported by Informer Technologies, Inc.
Currently installed 3 official extensions. Copyright © 2003–2009 PunBB.
[ Generated in 0.021 seconds, 7 queries executed ]