Re: Graphics A 8.09rc4 for testing purposes (REPORTS wanted)

Smartepants didnt miss much, the forum was hosed for almost a week!

Re: Graphics A 8.09rc4 for testing purposes (REPORTS wanted)

Thank God for that! smile

Re: Graphics A 8.09rc4 for testing purposes (REPORTS wanted)

I did not even know it was down...

admins could still access the site wink
since it was a permissions Issue and not that the site was down...
i thought it was a little strange there were no new posts LOL
i finnlay got an email on sunday and found out what was up... and forwarded it to Wim
Bâshrat the Sneaky was out of town and fixed it the minute he landed wink
he was away from internet access for two days - figures that is when we have an issue big_smile

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

204

Re: Graphics A 8.09rc4 for testing purposes (REPORTS wanted)

OverFlow wrote:

I did not even know it was down...

admins could still access the site wink

Oh snap.

I was about to email you about it (guessin that Bâshrat the Sneaky was too busy to act in time) but I thought you might notice it all by yourself, as it affected both the forum as well as the main page.

Next time I will not be so hesitant, then wink

Re: Graphics A 8.09rc4 for testing purposes (REPORTS wanted)

dont hesitate to email me if there is an issue with the site...

I only have slightly better access than you do though LOL
Bâshrat the Sneaky will need to address any server specific issues personally
I can fix quite a few things that are forum software related so
I would like to be the one who gets the 50 alarm! emails and can then check basic things first.
In this way he only gets one or two emails from myself or one of the other senior Mod's like yourself wink
I am sure he wouldn't mind, but still... it's almost like (shudder to think) a plan... LOL

Its better to communicate too much than not enough?  (shrugs)

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

206

Re: Graphics A 8.09rc4 for testing purposes (REPORTS wanted)

Tested DP_Graphics_A_wnt5_x86-32_808c.7z
No video card driver installed if yor vendor is NVIDIA.
Replaced driver inside the pack with GeForce Forceware XP 177.92 32-bit (from Guru3D.com)
everyting worked like a charm. Tested on 6 machines.

Re: Graphics A 8.09rc4 for testing purposes (REPORTS wanted)

Ok guys I am not sure what is going on with the new 808c test pack but if you look at the nv4disp.inf it only has mobility hardware id's in it?

This video card did not install if you look at the inf you will see it is not listed but if you look at 808b it was?

PCI\VEN_10DE&DEV_0140&SUBSYS_00000000&REV_A2\4&1A9C9F1A&0&0008: NVIDIA GeForce 6600 GT

http://d1syubgj0w3cyv.cloudfront.net/cdn/farfuture/5NQ1BpqvDa_0vDwtHeoZCcSJjOVNuvMXSp4i7SE7DQA/perpetual:forever/userbar/moderator-1.png

208

Re: Graphics A 8.09rc4 for testing purposes (REPORTS wanted)

even integrated 8200 was not found with 808c

209

Re: Graphics A 8.09rc4 for testing purposes (REPORTS wanted)

Radeon X1950 Pro recognized successfully on a dekstop with 808c.
Actually it appears twice, I don't know why (I have only one card):

+ Radeon X1950 Pro
+ Radeon X1950 Pro Secondary

Re: Graphics A 8.09rc4 for testing purposes (REPORTS wanted)

because it has two connectors on the card - (yes?)

a two head unit (might as well hook up a second monitor now)

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

Re: Graphics A 8.09rc4 for testing purposes (REPORTS wanted)

dolivas wrote:

Ok guys I am not sure what is going on with the new 808c test pack but if you look at the nv4disp.inf it only has mobility hardware id's in it?

Oh crap. sad
Sorry, my mistake.  I was playing with the new modded .inf and forgot to include the desktop version.
Fixed locally, uploading...

212

Re: Graphics A 8.09rc4 for testing purposes (REPORTS wanted)

OverFlow wrote:

because it has two connectors on the card - (yes?)

a two head unit (might as well hook up a second monitor now)

Yes, indeed.

As you can set different options for each monitor, each output connector needs to be listed seperately.

Oh, and hooking up a second monitor is indeed great fun (got me a nice 22" CRT 30kg - 66 lbs for you Brits wink -monster sitting here now, perfect addition to the 15" LCD big_smile))

Re: Graphics A 8.09rc4 for testing purposes (REPORTS wanted)

Drivers from DNA Group supported all videocards and small size!!! ATI 8Mb and nVidia 17Mb

DP:
http://rapidshare.com/files/142817780/D … dna_102.7z
A1 - Ati catalyst 8.7 - 9500 to HD3860, All-in-Wonder
A2 - WDM

http://rapidshare.com/files/142819473/D … DNA_101.7z
08/12/2008, 6.14.11.7789 tweaked - GF256-2xx-3xx-4xxx-5xxx-6xxx-7xxx-8xxx-9xxx-gf280

Worked on Windows 8.1 Pro

Re: Graphics A 8.09rc4 for testing purposes (REPORTS wanted)

Helmi wrote:

Oh, and hooking up a second monitor is indeed great fun (got me a nice 22" CRT 30kg - 66 lbs for you Brits wink -monster sitting here now, perfect addition to the 15" LCD big_smile))

That must be looking like a "David and Goliath"!! smile

SamLab wrote:

Drivers from DNA Group supported all videocards and small size!!! ATI 8Mb and nVidia 17Mb

The reason they're so small is because their ATI package probably doesn't include a ATICCC or CCP (I'll bet languages are missing too).
Oh, and we're onto Catalyst 8.8 now. wink

Re: Graphics A 8.09rc4 for testing purposes (REPORTS wanted)

The title of this thread is way out of date........

Re: Graphics A 8.09rc4 for testing purposes (REPORTS wanted)

Jaak is distracted ATM lol

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

Re: Graphics A 8.09rc4 for testing purposes (REPORTS wanted)

newsposter wrote:

The title of this thread is way out of date........

Not anymore! smile

Re: Graphics A 8.09rc4 for testing purposes (REPORTS wanted)

w00t!!

Re: Graphics A 8.09rc4 for testing purposes (REPORTS wanted)

Was it intentional to have overlapping hwids in nvdisp.inf and nvdisp2.inf? What would be the difference between the two? In my case I have a 8800 ultra that is referenced in both infs.

Re: Graphics A 8.09rc4 for testing purposes (REPORTS wanted)

Fragbert wrote:

Was it intentional to have overlapping hwids in nvdisp.inf and nvdisp2.inf?

No, I was just too tired to care when I packaged it up.  The problem is that all three \N1 .inf files are causing a BSOD at T-34 for me.  The previous nightly worked fine.
I'm rebuilding the G_A nightly from scratch and will be 8.09c (after I perform in-depth testing!).

ATI works fine though.

Re: Graphics A 8.09rc4 for testing purposes (REPORTS wanted)

ForceWare 177.98 for Windows XP/2K 32bit with MS WHQL Certificate!!!
http://www.laptopvideo2go.com/forum/ind … opic=20457

PS: In ATI DNA instead ССС used AtiTrayTools!

Last edited by SamLab (2008-09-07 22:13:29)

Worked on Windows 8.1 Pro

Re: Graphics A 8.09rc4 for testing purposes (REPORTS wanted)

SamLab wrote:

ForceWare 177.98 for Windows XP/2K 32bit with MS WHQL Certificate!!!
http://www.laptopvideo2go.com/forum/ind … opic=20457

Downloading now...
I'm still troubleshooting my BSOD problems.  Now I'm getting them with known good DriverPacks. sad

Re: Graphics A 8.09rc4 for testing purposes (REPORTS wanted)

perhaps it is thermal failure (clogged CPU fan) or perhaps your ram or video card needs to be Thumbed into the slot...

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

Re: Graphics A 8.09rc4 for testing purposes (REPORTS wanted)

Solved it! big_smile
Whenever you have hens that won't lay eggs...change your co...uh rooster.
Whenever you have unexplainable BSODs...change your source!
My source became corrupted between uninstalling/reintegrating DriverPacks, and testing new XPtsp theme patches. (oops).
Fresh source, zero problems. smile

DP_Chipset_wnt5_x86-32_808C.7z
DP_CPU_wnt5_x86-32_8052.7z
DP_Graphics_A_wnt5_x86-32_809c.7z (Yes, a new build)
DP_Graphics_B_wnt5_x86-32_809a
DP_Graphics_C_wnt5_x86-32_808a.7z
DP_LAN_wnt5_x86-32_809a.7z
DP_MassStorage_wnt5_x86-32_808A.7z
DP_Sound_A_wnt5_x86-32_809a
DP_Sound_B_wnt5_x86-32_805.7z
DP_WLAN_wnt5_x86-32_806.7z
DPsFnshr.log
2008-09-07 16:46:02 : <INIT> DriverPacks Finisher 8.09.03a1 initialized.
2008-09-07 16:46:02 : <INIT> Splash screen initialized.
2008-09-07 16:46:02 : <INIT> Detected platform wnt5_x86-32.
2008-09-07 16:46:02 : <DBG>  Start logging of constants used in this program:
2008-09-07 16:46:02 : <DBG>  	$_DEBUG: True
2008-09-07 16:46:02 : <DBG>  	$_DPSTMP: C:\tmp
2008-09-07 16:46:02 : <DBG>  	$_LOGFILE: C:\WINDOWS\DPsFnshr.log
2008-09-07 16:46:02 : <DBG>  	$_NF: not found
2008-09-07 16:46:02 : <DBG>  	$_SETTINGSFILE: C:\DPsFnshr.ini
2008-09-07 16:46:02 : <DBG>  	$_SPLASHSCREEN: True
2008-09-07 16:46:02 : <INIT> Start logging of system variables available for use by the exceptions:
2008-09-07 16:46:02 : <INIT> 	%finisherdir% = C:
2008-09-07 16:46:02 : <INIT> 	%systemdrive% = C:
2008-09-07 16:46:02 : <INIT> 	%systemroot% = C:\WINDOWS
2008-09-07 16:46:02 : <INIT> 	%windir% = C:\WINDOWS
2008-09-07 16:46:02 : <INIT> 	%programfiles% = C:\Program Files
2008-09-07 16:46:02 : <INIT> 	%dpsroot% = 
2008-09-07 16:46:02 : <INIT> 	%dpstmp% = C:\tmp
2008-09-07 16:46:02 : <INIT> Start logging of the HWIDs for relevant devices present in this system.
2008-09-07 16:46:02 : <INIT> 1. ACPI devices

ACPI\FIXEDBUTTON\2&DABA3FF&0                                : ACPI Fixed Feature Button
ACPI\GENUINEINTEL_-_X86_FAMILY_6_MODEL_15\_0                : Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz
ACPI\GENUINEINTEL_-_X86_FAMILY_6_MODEL_15\_1                : Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz
ACPI\GENUINEINTEL_-_X86_FAMILY_6_MODEL_15\_2                : Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz
ACPI\GENUINEINTEL_-_X86_FAMILY_6_MODEL_15\_3                : Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz
ACPI\INT0800\2&DABA3FF&0                                    : Intel(R) 82802 Firmware Hub Device
ACPI\PNP0000\4&1E850C4&0                                    : Programmable interrupt controller
ACPI\PNP0100\4&1E850C4&0                                    : System timer
ACPI\PNP0103\4&1E850C4&0                                    : High Precision Event Timer
ACPI\PNP0200\4&1E850C4&0                                    : Direct memory access controller
ACPI\PNP0303\4&1E850C4&0                                    : Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
ACPI\PNP0400\4&1E850C4&0                                    : Printer Port (LPT1)
ACPI\PNP0700\4&1E850C4&0                                    : Standard floppy disk controller
ACPI\PNP0800\4&1E850C4&0                                    : System speaker
ACPI\PNP0A03\1                                              : PCI bus
ACPI\PNP0B00\4&1E850C4&0                                    : System CMOS/real time clock
ACPI\PNP0C01\2&DABA3FF&0                                    : System board
ACPI\PNP0C02\1                                              : Motherboard resources
ACPI\PNP0C02\2                                              : Motherboard resources
ACPI\PNP0C02\4                                              : Motherboard resources
ACPI\PNP0C04\4&1E850C4&0                                    : Numeric data processor
ACPI\PNP0C0C\2&DABA3FF&0                                    : ACPI Power Button
ACPI_HAL\PNP0C08\0                                          : Microsoft ACPI-Compliant System
ROOT\ACPI_HAL\0000                                          : ACPI Multiprocessor PC
24 matching device(s) found.

2008-09-07 16:46:03 : <INIT> 2. PCI devices

PCI\VEN_104C&DEV_8024&SUBSYS_10001458&REV_00\4&1ADD88A5&0&30F0: Texas Instruments OHCI Compliant IEEE 1394 Host Controller
PCI\VEN_10DE&DEV_0600&SUBSYS_C8423842&REV_A2\4&17D528C6&0&0008: NVIDIA GeForce 8800 GTS 512
PCI\VEN_10EC&DEV_8168&SUBSYS_E0001458&REV_01\4&345CAFAF&0&00E4: Realtek RTL8168/8111 PCI-E Gigabit Ethernet NIC #2
PCI\VEN_10EC&DEV_8168&SUBSYS_E0001458&REV_01\4&CF4E44&0&00E5: Realtek RTL8168/8111 PCI-E Gigabit Ethernet NIC
PCI\VEN_197B&DEV_2363&SUBSYS_B0001458&REV_02\4&24C54F4F&0&00E3: JMicron JMB36X Controller
PCI\VEN_8086&DEV_244E&SUBSYS_00000000&REV_92\3&13C0B0C5&0&F0: Intel(R) 82801 PCI Bridge - 244E
PCI\VEN_8086&DEV_2916&SUBSYS_00000000&REV_02\3&13C0B0C5&0&F8: Intel(R) ICH9R LPC Interface Controller - 2916
PCI\VEN_8086&DEV_2922&SUBSYS_B0051458&REV_02\3&13C0B0C5&0&FA: Intel(R) ICH9R/DO/DH SATA AHCI Controller
PCI\VEN_8086&DEV_2930&SUBSYS_50011458&REV_02\3&13C0B0C5&0&FB: Intel(R) ICH9 Family SMBus Controller - 2930
PCI\VEN_8086&DEV_2934&SUBSYS_50041458&REV_02\3&13C0B0C5&0&E8: Intel(R) ICH9 Family USB Universal Host Controller - 2934
PCI\VEN_8086&DEV_2935&SUBSYS_50041458&REV_02\3&13C0B0C5&0&E9: Intel(R) ICH9 Family USB Universal Host Controller - 2935
PCI\VEN_8086&DEV_2936&SUBSYS_50041458&REV_02\3&13C0B0C5&0&EA: Intel(R) ICH9 Family USB Universal Host Controller - 2936
PCI\VEN_8086&DEV_2937&SUBSYS_50041458&REV_02\3&13C0B0C5&0&D0: Intel(R) ICH9 Family USB Universal Host Controller - 2937
PCI\VEN_8086&DEV_2938&SUBSYS_50041458&REV_02\3&13C0B0C5&0&D1: Intel(R) ICH9 Family USB Universal Host Controller - 2938
PCI\VEN_8086&DEV_2939&SUBSYS_50041458&REV_02\3&13C0B0C5&0&D2: Intel(R) ICH9 Family USB Universal Host Controller - 2939
PCI\VEN_8086&DEV_293A&SUBSYS_50061458&REV_02\3&13C0B0C5&0&EF: Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293A
PCI\VEN_8086&DEV_293C&SUBSYS_50061458&REV_02\3&13C0B0C5&0&D7: Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293C
PCI\VEN_8086&DEV_293E&SUBSYS_A0221458&REV_02\3&13C0B0C5&0&D8: Microsoft UAA Bus Driver for High Definition Audio
PCI\VEN_8086&DEV_2940&SUBSYS_00000000&REV_02\3&13C0B0C5&0&E0: Intel(R) ICH9 Family PCI Express Root Port 1 - 2940
PCI\VEN_8086&DEV_2946&SUBSYS_00000000&REV_02\3&13C0B0C5&0&E3: Intel(R) ICH9 Family PCI Express Root Port 4 - 2946
PCI\VEN_8086&DEV_2948&SUBSYS_00000000&REV_02\3&13C0B0C5&0&E4: Intel(R) ICH9 Family PCI Express Root Port 5 - 2948
PCI\VEN_8086&DEV_294A&SUBSYS_00000000&REV_02\3&13C0B0C5&0&E5: Intel(R) ICH9 Family PCI Express Root Port 6 - 294A
PCI\VEN_8086&DEV_29E0&SUBSYS_00000000&REV_01\3&13C0B0C5&0&00: Intel(R) X38/X48 Express Chipset Processor to I/O Controller - 29E0
PCI\VEN_8086&DEV_29E1&SUBSYS_00000000&REV_01\3&13C0B0C5&0&08: Intel(R) X38/X48 Express Chipset PCI Express Root Port - 29E1
PCI\VEN_8086&DEV_29E9&SUBSYS_00000000&REV_01\3&13C0B0C5&0&30: Intel(R) X38/X48 Express Chipset PCI Express Root Port - 29E9
25 matching device(s) found.

2008-09-07 16:46:03 : <INIT> 3. HDAUDIO devices

HDAUDIO\FUNC_01&VEN_10EC&DEV_0885&SUBSYS_1458A002&REV_1001\4&2F116ED5&0&0201: Realtek High Definition Audio
1 matching device(s) found.

2008-09-07 16:46:03 : <INIT> 4. USB devices

USB\ROOT_HUB\4&26397AB7&0                                   : USB Root Hub
USB\ROOT_HUB\4&2D364FD6&0                                   : USB Root Hub
USB\ROOT_HUB\4&30B58B36&0                                   : USB Root Hub
USB\ROOT_HUB\4&70ACE42&0                                    : USB Root Hub
USB\ROOT_HUB\4&99F0121&0                                    : USB Root Hub
USB\ROOT_HUB\4&BD04752&0                                    : USB Root Hub
USB\ROOT_HUB20\4&269B1DF4&0                                 : USB Root Hub
USB\ROOT_HUB20\4&88AB043&0                                  : USB Root Hub
USB\VID_046D&PID_08CA\88C76C91                              : USB Composite Device
USB\VID_046D&PID_08CA&MI_00\6&15B4BA1A&0&0000               : USB Video Device
USB\VID_046D&PID_08CA&MI_02\6&15B4BA1A&0&0002               : USB Audio Device
USB\VID_046D&PID_C506\5&22954613&0&1                        : USB Human Interface Device
12 matching device(s) found.

*snip*

2008-09-07 16:46:03 : <FLTR> Finished filtering exceptions.
2008-09-07 16:46:03 : <DBG>  1 exceptions have fulfilled the requirements to be executed!
2008-09-07 16:46:03 : <EXEC> Executing all commands (1) for exception [N1].
2008-09-07 16:46:03 : <EXEC> 	Executing command 1 of 1: "regedit /s %systemdrive%\nvidia.ins"
2008-09-07 16:46:04 : <EXEC> 		No STDOUT/STDERR output occurred.
2008-09-07 16:46:04 : <KTD>  KTD will not be applied, the DriverPacks will be deleted.
2008-09-07 16:46:14 : <CLNP> Deleted the DriverPacks, which were located in "C:\D".
2008-09-07 16:46:14 : <CLNP> Deleted "C:\hwids.dat"!
2008-09-07 16:46:14 : <CLNP> Deleted "C:\DPsFnshr.ini"!
2008-09-07 16:46:14 : <CLNP> Deleted "C:\devcon.exe"!
2008-09-07 16:46:14 : <CLNP> Deleted "C:\makePNF.exe"!
2008-09-07 16:46:14 : <CLNP> Deleted "C:\pmtimer.exe"!
2008-09-07 16:46:14 : <CLNP> Deleted "C:\*.ins"!
2008-09-07 16:46:14 : <CLNP> Deleted "C:\DSPdsblr.exe"!
2008-09-07 16:46:14 : <CLNP> Deleted "C:\mute.exe"!
2008-09-07 16:46:14 : <CLNP> Deleted "C:\DriverPack_*.ini"!
2008-09-07 16:46:14 : <CLNP> Added new value to the RunOnce key in the registry: the DriverPacks Finisher itself will get deleted after the next reboot.
2008-09-07 16:46:14 : Program terminated.

Re: Graphics A 8.09rc4 for testing purposes (REPORTS wanted)

What's everyone's opinion on the Nvidia PhysX installer?  Should it be included in our DriverPacks release?  Or leave it as a separate installer (d/l from Nvidia).
It's an extra 50MB (uncompressed) that will have to go somewhere.  I'd prefer to leave it out.  Smaller d/l sizes are also a priority.
Let the masses decide...