You are not logged in. Please login or register.
DriverPacks.net Forum » DriverPack Mass Storage » INTEL Matrix Storage Manager 8.0.0.1039 & VIA Hyperion Pro 5.17a
INTEL Matrix Storage Manager drivers 8.0.0.1039
http://www.station-drivers.com/page/intel%20raid.htm
++++++++++
VIA Hyperion Pro drivers 5.17a
http://www.station-drivers.com/page/viachip.htm
Direct download link:
http://www.viaarena.com/Driver/via_hype … _v517a.zip
Last edited by vailr (2008-04-30 03:23:17)
Already working on the update, a test pack should be ready tonight.
let's keep the Leaky drivers in a test pack till we get some good feedback...
old link, removed
Last edited by Jaak (2008-05-08 20:41:13)
Jon?
release 804 has marvel 10/18/2007,1.2.0.51 in [M1] and this testpack rolled back (downgraded) to 05/22/2007,1.2.0.45
But the new marvel SAS in [M4] seems to not warrant the downgrade. (and I saw no issues reported on [M1] marvel 10/18/2007,1.2.0.51.
You have seen me downgrade intel 7.08 with a "fix" to 7.05 in testpack 804a, and the 804d testpack I later put up had clean intel 7.08 again.
With the testpack we have here intel solution to XP ahci trouble could work.
Nice work in intel and Via.
I wondered what the downgrade is for. (Thankfully, the [M1] INI needs no edit for that. The drivers cover same HWIDs so it is just replace with version we had/or keep the rollback.).
Your judgment is usually sharp and based on hands on.
----------------
Folks, don't be fooled. This test pack looks GREAT.
Please test this on suitable hardware.
Last edited by Jaak (2008-05-01 03:59:22)
Looks like I overwrited the wrong drivers with Araxis Merge....I taught I had newer ones...I was tired...
EDIT: 8.04F uploaded, newer Marvell drivers were restored.
Last edited by JakeLD (2008-05-01 12:38:12)
I thought it was a smart move, but is was 'the language barriere.'
Jon, I once said testpacks get tested by a few team members, and releases get tested by users.
The sticky topic in this forum will link to test versions so we get more people to look at it.
araxis.. is the coolest tool (if you are not colour blind)
I don't hav any pc for moment to teste AHCI issue.....sorry (I will test as soon as possible)
DP_MassStorage_wnt5_x86-32_804h.7z (link pulled)
(I know it is may.. but since this is an update on a series of tests we started in 804..)
original files should work.
Users like abdou tell us VIA IDE mode does not need mass storage, so I removed those HWIDS in Via INI. (those I said would stay in..)
----- -----
compared to the released 804.
---------
Changed
- [P7] correction in INI, a disabled HWID was re-enabled (Jaak)
- [PB] deleted (Jaak)
- [V3] Commented 64 bits lines (JakeLD)
- [V3] and [V4] INI, removed some IDE mode HWIDs from INI.
- [I3] Intel Matrix Storage, INI supports HWIDs "not updated by intel" (JakeLD)
- Renamed [I4] to [I5] to make place for a new \i4 Intel Matrix Storage (JakeLD)
New
- [I4] Intel Matrix Storage 04/15/2008,8.0.0.1039 (JakeLD)
- [M4] Marvell 64xx/63xx SAS Controller 12/06/2007,2.1.0.11 (JakeLD)
Updated
- [J] JMicron JMB36X/37X Controller from 11/26/2007, 1.17.31.00 to 04/03/2008, 1.17.33.03 (JakeLD)
- [V4] VIA SATA from 10/18/2007,6.0.6000.230 [5.16a] to 04/03/2008,6.0.6000.252 [5.17a] (JakeLD)
I never talk about via IDE....my problem it's intel ahci
Hi,
'like you' ...
(those that give feedback)
testfile 804h has this new intel file.
Jaak was there a problem with Intel ? I can see you put the default names back plus you downgraded Marvell. I'm working on a update, i'm including 1 new driver, I will integrate the via changes you made.
We always should be useing the default names 
We should at least try to keep them.
Sorry about the marvel downgrade. It slipped back in..
804h pulled
mass testfile 804h2 has been uploaded.
testfile chips 805b uploaded.
testfile graphics a 805_nightly uploaded.
Sooo.. is Intel AHCI now working as it should? XP detects the hardrive and no BSOD or erros?
That is where you can help us... Please test...
and report your HWID's with the results.
It is the only way we will know...
Alright, I make a image now and I will test it tonight hopefully. M1 or M2 recommended?
most people use M2 but if you normaly don't that is fine too.
try it as you normaly would that way you will be familiar with the process and the result.
Thanks for testing - it is important...
Aspire 5325 laptop and the .iso contained XP Pro SP3 with DP Masstorage 805C textmode slipstreamed through M2 and the three lines deleted from winnt.sif. Harddrive detected, XP got installed and drivers just worked 
This was when AHCI was selected in BIOS.
I get HWIDs in 24 hours. My friend had some problem with ethernet driver for WinXP.
Intel Celeron D, 2800
ASRock 775VM800
VIA P4M800 Pro
NVIDIA GeForce 6600 (256 ??)
VIA AC'97 Enhanced Audio Controller
SAMSUNG SP2504C (250 ??, 7200 RPM, SATA-II)
IDE VIA Serial ATA Controller - 3149
Not installed SATA-drivers
HWID without SATA:
===========
PCI Devices
===========
PCI\VEN_10DE&DEV_00F2&SUBSYS_00000000&REV_A2\4&354AEA31&0&0008: NVIDIA GeForce 6600
PCI\VEN_1106&DEV_0314&SUBSYS_00000000&REV_00\3&267A616A&0&00: VIA Standard Host Bridge
PCI\VEN_1106&DEV_0571&SUBSYS_05711849&REV_06\3&267A616A&0&79: VIA Bus Master IDE PCI\VEN_1106&DEV_1314&SUBSYS_00000000&REV_00\3&267A616A&0&01: VIA Standard Host Bridge
PCI\VEN_1106&DEV_2314&SUBSYS_00000000&REV_00\3&267A616A&0&02: VIA Standard Host Bridge
PCI\VEN_1106&DEV_3038&SUBSYS_30381849&REV_81\3&267A616A&0&80: VIA Rev 5 USB PCI\VEN_1106&DEV_3038&SUBSYS_30381849&REV_81\3&267A616A&0&81: VIA Rev 5 USB PCI\VEN_1106&DEV_3038&SUBSYS_30381849&REV_81\3&267A616A&0&82: VIA Rev 5 USB PCI\VEN_1106&DEV_3038&SUBSYS_30381849&REV_81\3&267A616A&0&83: VIA Rev 5 USB PCI\VEN_1106&DEV_3059&SUBSYS_97611849&REV_60\3&267A616A&0&8D: C-Media AC97 Audio Device
PCI\VEN_1106&DEV_3065&SUBSYS_30651849&REV_78\3&267A616A&0&90: VIA Compatable Fast Ethernet PCI\VEN_1106&DEV_3104&SUBSYS_31041849&REV_86\3&267A616A&0&84: VIA USB PCI\VEN_1106&DEV_3149&SUBSYS_31491849&REV_80\3&267A616A&0&78: PCI\VEN_1106&DEV_3208&SUBSYS_00000000&REV_00\3&267A616A&0&03: VIA Standard Host Bridge
PCI\VEN_1106&DEV_3227&SUBSYS_00000000&REV_00\3&267A616A&0&88: VIA Standard PCI to ISA Bridge
PCI\VEN_1106&DEV_4314&SUBSYS_00000000&REV_00\3&267A616A&0&04: VIA Standard Host Bridge
PCI\VEN_1106&DEV_7314&SUBSYS_00000000&REV_00\3&267A616A&0&07: VIA Standard Host Bridge
PCI\VEN_1106&DEV_B198&SUBSYS_00000000&REV_00\3&267A616A&0&08: VIA CPU to AGP2.0/AGP3.0 Controller
18 matching device(s) found.
===========
USB Devices
===========
USB\ROOT_HUB\4&122C2065&0 : USB\ROOT_HUB\4&24E5D10A&0 : USB\ROOT_HUB\4&28538922&0 : USB\ROOT_HUB\4&3B0D39C7&0 : USB\ROOT_HUB20\4&87115DE&0 : USB\VID_3538&PID_0042\D107AFF75D80E7 : USBSTOR\DISK&VEN_GENERIC&PROD_USB_FLASH_DISK&REV_1.00\D107AFF75D80E7&0: Generic USB Flash Disk USB Device
7 matching device(s) found.
=============
Input Devices
=============
No matching devices found.
============
ACPI Devices
============
ACPI\FIXEDBUTTON\2&DABA3FF&0 : ACPI\GENUINEINTEL_-_X86_FAMILY_15_MODEL_4\_0 : Intel(R) Celeron(R) CPU 2.80GHz
ACPI\PNP0000\4&30647147&0 : ACPI\PNP0100\4&30647147&0 : ACPI\PNP0200\4&30647147&0 : ACPI\PNP0303\4&30647147&0 : ACPI\PNP0401\1 : ECP ACPI\PNP0501\1 : ACPI\PNP0700\4&30647147&0 : ACPI\PNP0800\4&30647147&0 : ACPI\PNP0A03\0 : ACPI\PNP0B00\4&30647147&0 : CMOS ACPI\PNP0C01\1 : ACPI\PNP0C02\0 : ACPI\PNP0C02\10 : ACPI\PNP0C04\4&30647147&0 : ACPI\PNP0C0C\AA : ACPI\PNP0F03\4&30647147&0 : Microsoft PS/2 ACPI_HAL\PNP0C08\0 : Microsoft ACPI-ROOT\ACPI_HAL\0000 : 20 matching device(s) found.Install drivers on the Windows with VIA_HyperionPro_V517A, but on the DP 805C drivers in D\M\V4\ (with changed VIPRT.INF on the x64 section)
HWID with SATA:
===========
PCI Devices
===========
PCI\VEN_10DE&DEV_00F2&SUBSYS_00000000&REV_A2\4&354AEA31&0&0008: NVIDIA GeForce 6600
PCI\VEN_1106&DEV_0314&SUBSYS_00000000&REV_00\3&267A616A&0&00: VIA Standard Host Bridge
PCI\VEN_1106&DEV_0571&SUBSYS_05711849&REV_06\3&267A616A&0&79: VIA Bus Master IDE Controller - 0571
PCI\VEN_1106&DEV_1314&SUBSYS_00000000&REV_00\3&267A616A&0&01: VIA Standard Host Bridge
PCI\VEN_1106&DEV_2314&SUBSYS_00000000&REV_00\3&267A616A&0&02: VIA Standard Host Bridge
PCI\VEN_1106&DEV_3038&SUBSYS_30381849&REV_81\3&267A616A&0&80: VIA Rev 5 USB PCI\VEN_1106&DEV_3038&SUBSYS_30381849&REV_81\3&267A616A&0&81: VIA Rev 5 USB PCI\VEN_1106&DEV_3038&SUBSYS_30381849&REV_81\3&267A616A&0&82: VIA Rev 5 USB PCI\VEN_1106&DEV_3038&SUBSYS_30381849&REV_81\3&267A616A&0&83: VIA Rev 5 USB PCI\VEN_1106&DEV_3059&SUBSYS_97611849&REV_60\3&267A616A&0&8D: C-Media AC97 Audio Device
PCI\VEN_1106&DEV_3065&SUBSYS_30651849&REV_78\3&267A616A&0&90: VIA Compatable Fast Ethernet PCI\VEN_1106&DEV_3104&SUBSYS_31041849&REV_86\3&267A616A&0&84: VIA USB PCI\VEN_1106&DEV_3149&SUBSYS_31491849&REV_80\3&267A616A&0&78: VIA Serial ATA Controller - 3149
PCI\VEN_1106&DEV_3208&SUBSYS_00000000&REV_00\3&267A616A&0&03: VIA Standard Host Bridge
PCI\VEN_1106&DEV_3227&SUBSYS_00000000&REV_00\3&267A616A&0&88: VIA Standard PCI to ISA Bridge
PCI\VEN_1106&DEV_4314&SUBSYS_00000000&REV_00\3&267A616A&0&04: VIA Standard Host Bridge
PCI\VEN_1106&DEV_7314&SUBSYS_00000000&REV_00\3&267A616A&0&07: VIA Standard Host Bridge
PCI\VEN_1106&DEV_B198&SUBSYS_00000000&REV_00\3&267A616A&0&08: VIA CPU to AGP2.0/AGP3.0 Controller
18 matching device(s) found.
===========
USB Devices
===========
USB\ROOT_HUB\4&122C2065&0 : USB\ROOT_HUB\4&24E5D10A&0 : USB\ROOT_HUB\4&28538922&0 : USB\ROOT_HUB\4&3B0D39C7&0 : USB\ROOT_HUB20\4&87115DE&0 : USB\VID_3538&PID_0042\D107AFF75D80E7 : USBSTOR\DISK&VEN_GENERIC&PROD_USB_FLASH_DISK&REV_1.00\D107AFF75D80E7&0: Generic USB Flash Disk USB Device
7 matching device(s) found.
=============
Input Devices
=============
No matching devices found.
============
ACPI Devices
============
ACPI\FIXEDBUTTON\2&DABA3FF&0 : ACPI\GENUINEINTEL_-_X86_FAMILY_15_MODEL_4\_0 : Intel(R) Celeron(R) CPU 2.80GHz
ACPI\PNP0000\4&30647147&0 : ACPI\PNP0100\4&30647147&0 : ACPI\PNP0200\4&30647147&0 : ACPI\PNP0303\4&30647147&0 : ACPI\PNP0401\1 : ECP ACPI\PNP0501\1 : ACPI\PNP0700\4&30647147&0 : ACPI\PNP0800\4&30647147&0 : ACPI\PNP0A03\0 : ACPI\PNP0B00\4&30647147&0 : CMOS ACPI\PNP0C01\1 : ACPI\PNP0C02\0 : ACPI\PNP0C02\10 : ACPI\PNP0C04\4&30647147&0 : ACPI\PNP0C0C\AA : ACPI\PNP0F03\4&30647147&0 : Microsoft PS/2 ACPI_HAL\PNP0C08\0 : Microsoft ACPI-ROOT\ACPI_HAL\0000 : 20 matching device(s) found.A very nice post SamLab good details and code tags.
you are the man!
the only thing I can think of is this
[V3]
ms_count=1
ms_1_deviceName="VIA SATA/PATA IDE"
ms_1_tag="VIDEX32"
ms_1_sysFile="VIDEX32.sys"
; (XP and 2003 natively support PCI\VEN_1106&DEV_0571&CC_0101. 2000 has no native VIA at all.)
; this line is for XP and windows2003. Comment it if you uncomment the line for 2000)
ms_1_hwids="PCI\VEN_1106&DEV_3149&CC_0101"
; (uncomment the full line for 2000 if you need the extra HWID.)
; ms_1_hwids="PCI\VEN_1106&DEV_0571&CC_0101,PCI\VEN_1106&DEV_3149&CC_0101"
ms_1_isBusExtender=false
[V3] section added to the DriverPack_LAN_wnt5_x86-32.ini? And i don`t understand comment or uncomment lines for the XP SP3
in simple terms the first example will work most of the time
[V3]
ms_count=1
ms_1_deviceName="VIA SATA/PATA IDE"
ms_1_tag="VIDEX32"
ms_1_sysFile="VIDEX32.sys"
ms_1_hwids="PCI\VEN_1106&DEV_3149&CC_0101"
ms_1_isBusExtender=false
if needed this alternate version may work if the first one does not.
[V3]
ms_count=1
ms_1_deviceName="VIA SATA/PATA IDE"
ms_1_tag="VIDEX32"
ms_1_sysFile="VIDEX32.sys"
ms_1_hwids="PCI\VEN_1106&DEV_0571&CC_0101,PCI\VEN_1106&DEV_3149&CC_0101"
ms_1_isBusExtender=false
the second example has one additional HWID the first one does not.
which makes make think crazy thoughts for jaak to try like ...
[V3]
ms_count=2
ms_1_deviceName="VIA SATA/PATA IDE"
ms_1_tag="VIDEX32"
ms_1_sysFile="VIDEX32.sys"
ms_1_hwids="PCI\VEN_1106&DEV_3149&CC_0101"
ms_1_isBusExtender=false
ms_1_exc_skipIfOS="w2k"
ms_2_deviceName="VIA SATA/PATA IDE"
ms_2_tag="VIDEX32"
ms_2_sysFile="VIDEX32.sys"
ms_2_hwids="PCI\VEN_1106&DEV_0571&CC_0101,PCI\VEN_1106&DEV_3149&CC_0101"
ms_2_isBusExtender=false
ms_2_exc_skipIfOS="wxp,w2k3"
I belive this resolves the issue for 2k and xp/2k3.
if in fact the HWID's list needing to be different for each OS an is a valid fix.
this could also extend to three different lists with -
ms_count=3
~ code for windows 2000 only
ms_1_exc_skipIfOS="wxp,w2k3"
~ code for windows 2003 only
ms_2_exc_skipIfOS="wxp,w2k"
~ code for windows XP only
ms_3_exc_skipIfOS="w2k,w2k3"
I have not tested this if this doesn't work i would consider that a bug 
jeff
Powered by PunBB, supported by Informer Technologies, Inc.
Currently installed 3 official extensions. Copyright © 2003–2009 PunBB.
[ Generated in 0.021 seconds, 10 queries executed ]