Topic: Ati radeon 2400HD -"Windows Help There is not enough memory available"

Hello,

After  DPsFnshr.exe execution error message box displayed every time after user login

Title: Windows Help
Text: There is not enough memory available for this task.
Quit one or more programs to increase available memory, and then try again. (2)

Solution - remove atiptaxx.exe icon from system tray
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run]
"ATIPTA"="C:\\Program Files\\ATI Technologies\\ATI Control Panel\\atiptaxx.exe"


Ati radeon 2400HD
DP base 7.05.2
DP Graphics A 7.10
DP Graphics B 7.10
DP Graphics C 7.09.1

DP integrated with Method2 and executed in GuiRunOnce
[GuiRunOnce]
Command9="%SystemDrive%\DPsFnshr.exe"

WBR Dmitry.

PS: If I disable DPsFnshr.exe in winnt.sif the error was not appear.

Last edited by mty (2007-11-30 03:44:23)

Re: Ati radeon 2400HD -"Windows Help There is not enough memory available"

Welcome to Driverpacks.

Can you try this file?
http://dev.driverpacks.thesneaky.com/dr … 32_7111.7z

It's built using the latest ATI catalyst 7.11 drivers.
It will also attempt to install the HDMI driver for that card.  Your testing would be invaluable to us.
You don't need the G_B or G_C driverpacks, they don't support that ATI card.

Re: Ati radeon 2400HD -"Windows Help There is not enough memory available"

mr_smartepants wrote:

Welcome to Driverpacks.

Can you try this file?
http://dev.driverpacks.thesneaky.com/dr … 32_7111.7z

Thank you for very important job! DriverPacks is very important for us.

I try this file now. The same problem appear.

WBR Dmitry.

Re: Ati radeon 2400HD -"Windows Help There is not enough memory available"

post your DPsFnshr.log

how much ram is in this machine?

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

Re: Ati radeon 2400HD -"Windows Help There is not enough memory available"

Ram = 2048Mb
I send log file later

This is NOT DPsFnshr error. This is error from ATI tray icon program. This program try to access to help file. This help file inaccessible or wrong format.

Re: Ati radeon 2400HD -"Windows Help There is not enough memory available"

Could it be the help file is in the wrong language??? I don't see others haveing this same issue...

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

Re: Ati radeon 2400HD -"Windows Help There is not enough memory available"

I will try to build a Russian version of this DP for you to test.  I'll do my best since I don't speak russian. smile
It's built, uploading now.

A month ago I tried building a multilanguage installer (using the .mst transforms built into the 'localizations' folder) but the setup.exe /s switch uses the info coded in the setup.iss file (language code) and I couldn't find a simple way to do it.  I found a complicated scripted way to do it but that's not an elegant solution.  The batch file would scan for a localized version of XP, write the appropriate code to a .txt file, then rename the txt file to setup.iss, overwrite the original setup.iss file, and then run setup.exe /s.
ugly.

Re: Ati radeon 2400HD -"Windows Help There is not enough memory available"

OK, this is a russian language version of G_A ONLY.
Try it and let us know.
http://dev.driverpacks.thesneaky.com/dr … russian.7z
Size: 80.2MB
MD5: 76D12295BBF0C272A60EF22FF68906C0

Re: Ati radeon 2400HD -"Windows Help There is not enough memory available"

Hello,
One year ago I made a mistake of enable the ATI Center option in the DP G-A, without the .NET. 
I got to desinstall the driver, install the .NET's, and reinstall the driver again to fix it.
My PC was a PB5 ASUS P4 3.6GHz with a ATI X1900XT .

Last week my Motherboard passed away, rest in peace ... we have such a good times !!!!

Now I build a P5K with a E8400 Core DUO, and the old ATI X1900XT.

This time I tried the Control Panel option, and I got now the "not enough memory for this task" issue.
Reinstall the last version didn't worked, but disable the control panel in the msconfig yes.

Anybody knows how to enable the CP again ?
If not I gonna try desisntall and install the NETs and the Control Center Version ...

Re: Ati radeon 2400HD -"Windows Help There is not enough memory available"

Did you include the .NET libraries in your disc?
It is essential they are included via an addon and installed at T-13 (if possible).

Re: Ati radeon 2400HD -"Windows Help There is not enough memory available"

I am now getting this message on my Dell Optiplex 745 (Radeon X1300/X1550 Series).  I know it's being caused by atiptaxx.exe and it happens under all users at logon.  I used DriverPack Base 8.05 to slipstream 8.04 graphics drivers (method 2, no KTD, QSC yes) on an XP Pro SP3 unattended CD (created with nLite).  If you need any more info, let me know.  Thanks for the great software, it's been working great otherwise! smile

Re: Ati radeon 2400HD -"Windows Help There is not enough memory available"

Can you explain exactly how you know it's being caused by atiptaxx.exe (Task Manager mem usage?)

Dell-branded graphics cards have been causing us headaches.  Can you check the graphics card itself for a "Dell" logo?
Thanks for reporting, and welcome to DriverPacks! smile

Re: Ati radeon 2400HD -"Windows Help There is not enough memory available"

Using Process Explorer, the winhlp32.exe process is being spawned off the atiptaxx.exe process; killing it makes the error message go away. 

As for the card, no branding on it (half-height PCIE card for the mini Dell case).  One label (green) has P/N 102A7710920 00001.  Another has ATI-102-A771(B) which, after a google, looks exactly like this and sounds like it's an X1300 from this site.  Let me know if I can be of any more help (I can boot up a liveCD and get the PCI ID if you want).

Thanks for the welcome smile

Re: Ati radeon 2400HD -"Windows Help There is not enough memory available"

Hmmm.
Can you try this test pack?
http://dev.driverpacks.thesneaky.com/dr … 32_806G.7z
You might get an error with the AVIVO codecs (I'm working on a fix already), but everything else should be good to go.

Re: Ati radeon 2400HD -"Windows Help There is not enough memory available"

Sure, but it'll have to wait till tomorrow to let you know how it went (leaving in 30 minutes).  Thanks for the help smile

edit: lol @ "Where did you get that?"

Last edited by tbkdan (2008-07-16 07:32:14)

Re: Ati radeon 2400HD -"Windows Help There is not enough memory available"

tbkdan wrote:

edit: lol @ "Where did you get that?"

Yeah, Bâshrat the Sneaky certainly has a sense of humour, hasn't he? big_smile

Re: Ati radeon 2400HD -"Windows Help There is not enough memory available"

I let the unattended go as I left yesterday, came in today, logged in, greeted by an ATI error.

Windows is in the "Personalized Settings, Setting up personalized settings for: Windows Desktop Update"
The error is:
ATI AVIVO Codecs
Error 1904.Module C:\Program Files\Common Files\ATI Technologies\Multimedia\atimcenc.dll failed to register.  HRESULT -2147010895.  Contact your support personnel.  Cancel/Retry/Ignore.

Retry fails, ignore brings up another for atidvcr.dll, then atixcode.dll, then it completes.  Then the Desktop finally loads and I'm greeted with "The ATI Control Panel failed to initialize because no ATI driver is installed, or ATI driver is not working properly.  The ATI Control Panel will now exit."  Indeed, the adapter has no drivers.  Arg.

Re: Ati radeon 2400HD -"Windows Help There is not enough memory available"

You ABSOLUTELY must have .NET installed or the 'ATI Control Center' will fail to install

if you are installing the the 'ATI Control Panel' then .net is not required wink

you can select None for the control panel option in base to verify this is the problem (or bypass it)

i did see you were referencing the ati cp but felt the need to make sure it was not the ati cc we were discussing

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

Re: Ati radeon 2400HD -"Windows Help There is not enough memory available"

OverFlow wrote:

You ABSOLUTELY must have .NET installed or the control panel will fail to install wink

you can select None for the control panel option in base to verify this is the problem

I have the second option selected (ATI Catalyst Control Panel) which does not state that .NET is required (the first option, ATI CCC, does).  Does the CCP also require the .NET FW?

Re: Ati radeon 2400HD -"Windows Help There is not enough memory available"

Nope...

just wanted to make sure we were all on the same page

Thanks for responding

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

Re: Ati radeon 2400HD -"Windows Help There is not enough memory available"

Thanks for the update.  I'm aware of the AVIVO codec problem and I'm building a new DP that fixes it.
I wasn't aware of any problems with the control panel though. sad
It's possible the botched AVIVO install borked the control panel installer since both use the built-in windows installer.  I'll look into it.
Can you decompress the G_A dp and double click the d\g\a1\aticcp.exe file to verify it works on it's own?

Re: Ati radeon 2400HD -"Windows Help There is not enough memory available"

To clarify, is the aticcp.exe a silent installer of some sort?  It runs briefly and I do not get any error messages, but when I manually try to run atiptaxx.exe from Program Files I get the same error ("The ATI Control Panel failed to initialize because no ATI driver is installed, or ATI driver is not working properly.  The ATI Control Panel will now exit.").  Rebooting makes no difference.  Do you want me to uninstall the CCP before and then run it?

Re: Ati radeon 2400HD -"Windows Help There is not enough memory available"

after the few tests I did without sound DriverPacks and suitable hardware, I think samlab has the key to conflict.
HDMI in video cards could be clashing with sound.

Erik, when I tried to corroberate that, I used low cost motherboards and graphics cards and I knew that the driver CD supplied with the mobo had a bad install routine because it clashed with its own IGP, and no third party graphics card was plugged.

when I used other testbeds, I saw that some ati drivers (supplied on the CD) had problems with hdmi.
What I am saying is that we see a mess, and it is not your/my/our fault.

Nvidia graphics and ATI with TV and sound capability will (this is for real.. it is a statement) clash with things like realtek.
We could have a perfect DriverPacks combo for 99.98 percent of users, and the next update in any of the main DriverPacks or third party (third party like modems with sound/and TV with sound..) can and (a prediction; they will) introduce issues to 20 percent.

edit;
HDaud sound capability and HDMI will, in my opinion, be an issue because the manufactors don't get their drivers right, and they seldom (if ever) look at conflict issues (with/against other manufactors // OEM implentations.) like we had to do...

Last edited by Jaak (2008-07-17 10:48:50)

The answer was 42?
Kind regards, Jaak.

Re: Ati radeon 2400HD -"Windows Help There is not enough memory available"

I Agree... ;D

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

Re: Ati radeon 2400HD -"Windows Help There is not enough memory available"

I agree too. sad

I sometimes do not want to undo the fine tuning.

There is a lot of Legacy in DriverPacks. I doubt there is an active current team member whom has all original drivers on his drive. Are there any?
I don't have all.
There are quite a few members with more expertise than I have, and I think they all know we have to make choices every now and then.
Jeff has summarised how we have to make our choices more than once.

The answer was 42?
Kind regards, Jaak.