What type of help you need? 'cause I can help tracking drivers and things like that (I hjave a few list of drivers to include and not included, video the most)
1 2006-12-04 04:23:14
Re: Another motivated member for the DriverPacks Team wanted! (17 replies, posted in Other)
2 2006-10-17 07:48:21
Re: [IMPLEMENTED] sound driver for Toshiba Satalite Pro A10 (4 replies, posted in DriverPack Sound)
Is an ADI SoundCard, same as the A15 that I reported a few days ago...
ADI is the driver for A10, A15, A20 and A25, A35 is Realtek and A45 and subsequent (I dont know all models after that 
) is Sigmatel...
3 2006-10-15 22:37:44
Re: [NEEDS REPLY] 0x7B BSOD w/ JMicron JMB363 SATA RAID (23 replies, posted in Feedback and Support - DriverPacks Base)
in this mobo that mention, I had trouble to install O.S in SATA2 disc with JMicron connector, simply Disc doesn't boot, with or without drivers, Black Screen before Blue Screen Loads.... a real trouble, I was thinking in change discs, my SATA for boot and my SATA2 for info (my SATA in the ALI controller was recognized right, without any driver in IDE mode), thinking that my SATA2 disc was not able to boot, but a few days later, I changed my PC for an AM2 based A64, with nforce 410/Geforce 6100 based Chipset, and all is right, my S.O. is in SATA2 disc and all is right....
Experience: Jmicron is too bad...
4 2006-10-15 19:35:35
Topic: Mass storage Driver ? in HP DV1125LA (0 replies, posted in DriverPack Mass Storage)
in a laptop HP DV1125LA I installed Windows with All drivers excepto Driver Graphics A, I when I check Drivers Manager, this say to me ? Mass Storage Controller.
In Dpfnshr.log I watch a 82801 ATA Driver installed, but I tried to install with KTD Folder and I this is don't recognized (I\1 and I\2) My mistake or is Driverpacks problem?
5 2006-10-15 19:31:08
Topic: [SOLVED] Monitor driver (1 replies, posted in 3rd Party DriverPacks)
This is a problem detected in a HP Pavillion DV1000LA and DV1125LA that Driver from Monitor is asked... is needed to sent next for continue, and this is detected as Plug and Play.
This have any solutions for completely unattended installation or I commited any mistake or error in something?
Thanks
6 2006-10-15 19:27:34
Topic: [IMPLEMENTED] Conexant Audio in HP DV1125LA (Spanish) detected as RT (2 replies, posted in DriverPack Sound)
I have an error with this Laptop. (Well in fact, 3 problems, but I post it in his respective topics).
The driver is detected as Realtek AC97, but is with a ! signal and says to me "Driver couldn't be initialized" (or something like that, I don't know original message in English, this system is in Spanish). Original Driver for this Laptop is Conexant CX20468-31 AC97.
(I have a new report of a beta tester with a Laptop DV1100LA with the same problem, sound functions but cutted with songs...., and Conexant Driver too)
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-27507-1&lc=es&cc=mx&lang=es&os=228&product=464375&dlc=es&sw_lang=8Original Driver....
7 2006-10-15 06:18:58
Topic: Multiboot with One I386 (2 replies, posted in Installation Platforms)
I have a disc with this Structure...
/
/I386
/VOL1
/VOL2
/$OEM$
/LOADER.BIN
/VOL1.DAT
/VOL2.DAT
I can do it with this method, or I need to do with single boot method (I have runonceex method for installing apps).
Vol1 is a recovery system
Vol2 is my O.S unattended.
I am using single boot method but with Mass I need to move or copy files to Vol2 to run every time I integrate the files, I need to do that of I can use multiboot?
8 2006-10-14 12:12:05
Re: [NEEDS REPLY] Uninstall old drivers..... Install new Drivers (2 replies, posted in Feedback and Support - DriverPacks Base)
I opted to rebuild again, cause that version sents me a lot of errors to update, All errors reported are from new version from scratch.
9 2006-10-14 12:10:02
Re: [PENDING BUG #273] svcpack.inf corrupted (5 replies, posted in Feedback and Support - DriverPacks Base)
about to send you to the bugtracker? yes it's in the bugtracker reported too... I haven't trying to repeat the process again with a new disk 'cause I'm in beta testing with a few users about the version, and I'm expecting the bugs to recompile them...
10 2006-10-13 12:14:29
Topic: [IMPLEMENTED] portcls.sys - BSOD on Toshiba Satellite A15-SP127 (4 replies, posted in DriverPack Sound)
that, Blue screen when I install in a Notebook model Satellite from Toshiba Corp...
11 2006-10-12 18:15:59
Re: What happening with the nForce 3/4/5 & Sillicon Image (9 replies, posted in DriverPack Mass Storage)
nForce4, nForce4xx y nForce5xx tested in IDE mode and without problems... next week I will test in RAID mode...
12 2006-10-09 10:56:58
Re: [SOLVED] ATIIDE.SYS problem (8 replies, posted in Feedback and Support - DriverPacks Base)
Solved, my mistake, I have another folder with boot sector... VOL2, and I needed to move from I386 to VOL2 to function, sorry, but the another problem stills, I post in bugtracker...
13 2006-10-09 08:42:57
Topic: [PENDING BUG #273] svcpack.inf corrupted (5 replies, posted in Feedback and Support - DriverPacks Base)
I finished my installation disk and proceed to install driverpacks, I run base with audio drivers A y B and they add kbs, but my svcpack.inf is corrupted (verified before and after install) and appears squares in there. I tried 6 times with this and always same result (diferent compilations, diferent configurations).
I'm trying to resolve this copying the old svcpack.inf adding cat files for HD audio but I don't know if this added anymore to svcpack.inf....
I post DPs_Base.ini DPs_Base.log and svcpack.inf before and after driverpacks....
DPs_Base.ini
[General]
; preferred language
prefLang = "Spanish"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons = "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI = "yes"
[Settings]
; disc/bartpe/multibootDisc
instPlatform = "disc"
; trailing backslash is allowed, but not necessary
location = "H:\wxpB2es_5cd"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks = "select"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod = "2"
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod = "RunOnceEx"
; you should only add this section if you've set [Settings]\finishMethod to "RunOnceEx"
[RunOnceExSettings]
; custom/default, if not specified: default
startID = "custom"
; anything you wish ...
customStartID = "23"
; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD = "all"
; <path>, to specify a custom KTD cache location, if not specified: default (%SystemRoot%\DriverPacks)
KTDlocation = "%SystemRoot%\DriverPacks"
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC = "yes"
; you should only add this section if you've set [Settings]\DriverPacks to "select"
[SelectDriverPacks]
DP_Chipset = "yes"
DP_CPU = "yes"
DP_Graphics_A = "no"
DP_Graphics_B = "yes"
DP_Graphics_C = "yes"
DP_LAN = "yes"
DP_MassStorage = "yes"
DP_Sound_A = "yes"
DP_Sound_B = "yes"
DP_WLAN = "yes"
DP_MassStorage_textmode = "yes"
; this section is optional!
[OptionalSettingsOther]
; CCC/CCP, use ATI Catalyst Control Center or ATI Catalyst Control Panel (only relevant when slipstreaming DriverPack Graphics A)
ATI_cpl = "CCC"DPs_Base.log
2006-10-08 15:16:49 : <INIT> DriverPacks BASE 6.10 initialized.
2006-10-08 15:16:49 : <INIT> Host environment: WIN_XP Service Pack 2 on X86 CPU.
2006-10-08 15:16:49 : <INIT> Imported proxy settings from Internet Explorer.
2006-10-08 15:16:49 : <INIT> Start scanning for DriverPacks for the wnt5_x86-32 platform.
2006-10-08 15:16:49 : <INIT> Detected DriverPack Chipset 6.09.1!
2006-10-08 15:16:49 : <INIT> Detected DriverPack CPU 6.09.1!
2006-10-08 15:16:49 : <INIT> Detected DriverPack Graphics A 6.09.1!
2006-10-08 15:16:49 : <INIT> Detected DriverPack Graphics B 6.09!
2006-10-08 15:16:49 : <INIT> Detected DriverPack Graphics C 6.09!
2006-10-08 15:16:49 : <INIT> Detected DriverPack LAN 6.08.1!
2006-10-08 15:16:49 : <INIT> Detected DriverPack MassStorage 6.08!
2006-10-08 15:16:49 : <INIT> Detected DriverPack Sound A 6.08.1!
2006-10-08 15:16:49 : <INIT> Detected DriverPack Sound B 6.08!
2006-10-08 15:16:49 : <INIT> Detected DriverPack WLAN 6.08!
2006-10-08 15:16:49 : <INIT> Could not detect any 3rd party DriverPacks.
2006-10-08 15:16:49 : <INIT> Finished scanning.
2006-10-08 15:16:49 : <INIT> Detected settings file "H:\driverpacks\DPs_BASE.ini".
2006-10-08 15:16:49 : <INIT> Windows XP Professional - OEM SP2 detected.
2006-10-08 15:16:49 : <INIT> The platform wnt5_x86-32_disc will be used (which is the 'disc' installation platform for the OS family 'wnt5_x86-32').
2006-10-08 15:16:49 : <INIT> Imported settings from settings file.
2006-10-08 15:16:49 : <GUI> Initialized GUI.
2006-10-08 15:16:49 : <GUI> Created a list of all available language files.
2006-10-08 15:16:50 : <GUI> Set the last used language, Spanish, as the GUI language.
2006-10-08 15:33:05 : <GUI> Refreshed UpdateChecker with success.
2006-10-08 15:33:34 : <GUI> Saved settings!
2006-10-08 15:33:34 : <GUI> Closed GUI.
2006-10-08 15:33:34 : <SEL> Selected module: mod_slip_wxp_x86-32_disc_m2.
2006-10-08 15:33:36 : <PREP> Removed all attributes from \I386.
2006-10-08 15:33:36 : <PREP> Created a backup of \I386\winnt.sif.
2006-10-08 15:33:36 : <PREP> Created a backup of \I386\txtsetup.sif.
2006-10-08 15:33:36 : <PREP> Created a backup of \I386\dosnet.inf.
2006-10-08 15:33:37 : <PREP> Cleaned up \$OEM$\cmdlines.txt.
2006-10-08 15:33:37 : <PREP> Created temporary working directory.
2006-10-08 15:33:37 : <SLIP> Created necessary directory structure for method 2.
2006-10-08 15:33:37 : <SLIP> Copied files necessary for method 2.
2006-10-08 15:33:38 : <SLIP> Extracted files necessary for method 2.
2006-10-08 15:33:39 : <SLIP> Created \I386\presetup.cmd file.
2006-10-08 15:33:39 : <SLIP> Updated \I386\txtsetup.sif to support method 2.
2006-10-08 15:33:39 : <SLIP> Updated \I386\dosnet.inf to support method 2.
2006-10-08 15:33:58 : <SLIP> Copied DriverPacks to \OEM.
2006-10-08 15:34:00 : <SLIP> Extracted and deleted \I386\svcpack.in_.
2006-10-08 15:34:01 : <SLIP> Updated \I386\svcpack.inf file to support KB888111 and KB921401.
2006-10-08 15:34:03 : <SLIP> Updated \I386\txtsetup.sif file to support KB888111.
2006-10-08 15:34:06 : <SLIP> Updated \I386\dosnet.inf file to support KB888111.
2006-10-08 15:34:06 : <SLIP> Updated \I386\dosnet.inf file to support KB921401.
2006-10-08 15:34:15 : <SLIP> Extracted DriverPack MassStorage to a temporary working directory.
2006-10-08 15:34:44 : <SLIP> Created QuickStream Cache for DriverPack MassStorage text mode drivers.
2006-10-08 15:34:45 : <SLIP> Slipstreamed DP MassStorage text mode drivers using QuickStream Cache.
2006-10-08 15:34:53 : <SLIP> Removed entries from \I386\txtsetup.sif that will be updated.
2006-10-08 15:34:55 : <SLIP> Removed entries from \I386\dosnet.inf that will be updated.
2006-10-08 15:35:51 : <SLIP> Updated \I386\dosnet.inf and \I386\txtsetup.sif to support DP MassStorage text mode drivers.
2006-10-08 15:35:51 : <SLIP> Updated \I386\winnt.sif to support method 2.
2006-10-08 15:35:51 : <SLIP> Updated DPsFnshr.ini to enable KTD for all DriverPacks.
2006-10-08 15:35:52 : <SLIP> Updated \$OEM$\cmdlines.txt to execute ROE.exe.
2006-10-08 15:35:52 : <SLIP> Slipstream finished in 2 minutes and 18 seconds.
2006-10-08 15:35:57 : <CLNP> Temporary working directory successfully deleted.
2006-10-08 15:35:57 : Program terminated.svcpack.inf before Drivers
[Version]
Signature="$Windows NT$"
MajorVersion=5
MinorVersion=1
BuildNumber=2600
[SetupData]
CatalogSubDir="\i386\SVCPACK"
[ProductCatalogsToInstall]
BASECSP.CAT
KB873339.CAT
KB884020.CAT
KB884883.CAT
KB885523.CAT
KB885626.CAT
KB885835.CAT
KB885836.CAT
KB885894.CAT
KB886677.CAT
KB886716.CAT
KB887472.CAT
KB888302.CAT
KB889016.CAT
KB889527.CAT
KB889673.CAT
KB890046.CAT
KB890831.CAT
KB890859.CAT
KB893357.CAT
KB893756.CAT
KB893803V2_NET.CAT
KB893803V2_WXP.CAT
KB896256.CAT
KB896358.CAT
KB896423.CAT
KB896424.CAT
KB896428.CAT
KB896626.CAT
KB896727.CAT
KB897338.CAT
KB897663.CAT
KB898461.CAT
KB898900.CAT
KB899271.CAT
KB899587.CAT
KB899588.CAT
KB899589.CAT
KB899591.CAT
KB900485.CAT
KB901017.CAT
KB901190.CAT
KB901214.CAT
KB902400.CAT
KB903234.CAT
KB903235.CAT
KB904412.CAT
KB904706.CAT
KB904942.CAT
KB905414.CAT
KB905749.CAT
KB906569.CAT
KB907265.CAT
KB907865.CAT
KB908519.CAT
KB908531.CAT
KB909095.CAT
KB910437.CAT
KB911562.CAT
KB911567.CAT
KB911927.CAT
KB912817.CAT
KB912919.CAT
KB913296.CAT
KB913538.CAT
KB913580.CAT
KB914388.CAT
KB914389.CAT
KB914440.CAT
KB914841.CAT
KB916281.CAT
KB916595.CAT
KB916846.CAT
KB917159.CAT
KB917344.CAT
KB917422.CAT
KB917537.CAT
KB917730.CAT
KB917734.CAT
KB917953.CAT
KB918005.CAT
KB918439.CAT
KB918899.CAT
KB919007.CAT
KB920214.CAT
KB920670.CAT
KB920683.CAT
KB920685.CAT
KB920872.CAT
KB921398.CAT
KB921883.CAT
KB922582.CAT
KB922616.CATsvcpack.inf after drivers
????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????14 2006-10-08 22:49:33
Re: [SOLVED] ATIIDE.SYS problem (8 replies, posted in Feedback and Support - DriverPacks Base)
Same problem, I burned it, and another problem added, my svcpack.inf was corrupted, I copy my "before drivers" svcpack.inf and added 2 lines, refeent to cats for sound driver.
I burned it in low speed constructed with cdimage CD, and same problem, ATIIDE.sys was not found...
INI
[General]
; preferred language
prefLang = "Spanish"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons = "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI = "yes"
[Settings]
; disc/bartpe/multibootDisc
instPlatform = "disc"
; trailing backslash is allowed, but not necessary
location = "H:\wxpB2es_5cd"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks = "select"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod = "2"
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod = "RunOnceEx"
; you should only add this section if you've set [Settings]\finishMethod to "RunOnceEx"
[RunOnceExSettings]
; custom/default, if not specified: default
startID = "custom"
; anything you wish ...
customStartID = "23"
; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD = "all"
; <path>, to specify a custom KTD cache location, if not specified: default (%SystemRoot%\DriverPacks)
KTDlocation = "%SystemRoot%\DriverPacks"
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC = "yes"
; you should only add this section if you've set [Settings]\DriverPacks to "select"
[SelectDriverPacks]
DP_Chipset = "yes"
DP_CPU = "yes"
DP_Graphics_A = "no"
DP_Graphics_B = "yes"
DP_Graphics_C = "no"
DP_LAN = "yes"
DP_MassStorage = "yes"
DP_Sound_A = "yes"
DP_Sound_B = "yes"
DP_WLAN = "yes"
DP_MassStorage_textmode = "yes"
; this section is optional!
[OptionalSettingsOther]
; CCC/CCP, use ATI Catalyst Control Center or ATI Catalyst Control Panel (only relevant when slipstreaming DriverPack Graphics A)
ATI_cpl = "CCC"LOG
2006-10-08 05:53:29 : <INIT> DriverPacks BASE 6.10 initialized.
2006-10-08 05:53:29 : <INIT> Host environment: WIN_XP Service Pack 2 on X86 CPU.
2006-10-08 05:53:29 : <INIT> Imported proxy settings from Internet Explorer.
2006-10-08 05:53:29 : <INIT> Start scanning for DriverPacks for the wnt5_x86-32 platform.
2006-10-08 05:53:29 : <INIT> Detected DriverPack Chipset 6.09.1!
2006-10-08 05:53:29 : <INIT> Detected DriverPack CPU 6.09.1!
2006-10-08 05:53:29 : <INIT> Detected DriverPack Graphics A 6.09.1!
2006-10-08 05:53:29 : <INIT> Detected DriverPack Graphics B 6.09!
2006-10-08 05:53:29 : <INIT> Detected DriverPack Graphics C 6.09!
2006-10-08 05:53:29 : <INIT> Detected DriverPack LAN 6.08.1!
2006-10-08 05:53:29 : <INIT> Detected DriverPack MassStorage 6.08!
2006-10-08 05:53:29 : <INIT> Detected DriverPack Sound A 6.08.1!
2006-10-08 05:53:29 : <INIT> Detected DriverPack Sound B 6.08!
2006-10-08 05:53:29 : <INIT> Detected DriverPack WLAN 6.08!
2006-10-08 05:53:29 : <INIT> Could not detect any 3rd party DriverPacks.
2006-10-08 05:53:29 : <INIT> Finished scanning.
2006-10-08 05:53:29 : <INIT> Detected settings file "H:\driverpacks\DPs_BASE.ini".
2006-10-08 05:53:29 : <INIT> Windows XP Professional - OEM SP2 detected.
2006-10-08 05:53:29 : <INIT> The platform wnt5_x86-32_disc will be used (which is the 'disc' installation platform for the OS family 'wnt5_x86-32').
2006-10-08 05:53:29 : <INIT> Imported settings from settings file.
2006-10-08 05:53:29 : <GUI> Initialized GUI.
2006-10-08 05:53:30 : <GUI> Created a list of all available language files.
2006-10-08 05:53:30 : <GUI> Set the last used language, Spanish, as the GUI language.
2006-10-08 05:54:03 : <GUI> Saved settings!
2006-10-08 05:54:03 : <GUI> Closed GUI.
2006-10-08 05:54:03 : <SEL> Selected module: mod_slip_wxp_x86-32_disc_m2.
2006-10-08 05:54:05 : <PREP> Removed all attributes from \I386.
2006-10-08 05:54:05 : <PREP> Created a backup of \I386\winnt.sif.
2006-10-08 05:54:06 : <PREP> Created a backup of \I386\txtsetup.sif.
2006-10-08 05:54:06 : <PREP> Created a backup of \I386\dosnet.inf.
2006-10-08 05:54:06 : <PREP> Cleaned up \$OEM$\cmdlines.txt.
2006-10-08 05:54:07 : <PREP> Created temporary working directory.
2006-10-08 05:54:07 : <SLIP> Created necessary directory structure for method 2.
2006-10-08 05:54:07 : <SLIP> Copied files necessary for method 2.
2006-10-08 05:54:07 : <SLIP> Extracted files necessary for method 2.
2006-10-08 05:54:08 : <SLIP> Created \I386\presetup.cmd file.
2006-10-08 05:54:08 : <SLIP> Updated \I386\txtsetup.sif to support method 2.
2006-10-08 05:54:09 : <SLIP> Updated \I386\dosnet.inf to support method 2.
2006-10-08 05:54:26 : <SLIP> Copied DriverPacks to \OEM.
2006-10-08 05:54:28 : <SLIP> Extracted and deleted \I386\svcpack.in_.
2006-10-08 05:54:28 : <SLIP> Updated \I386\svcpack.inf file to support KB888111 and KB921401.
2006-10-08 05:54:30 : <SLIP> Updated \I386\txtsetup.sif file to support KB888111.
2006-10-08 05:54:33 : <SLIP> Updated \I386\dosnet.inf file to support KB888111.
2006-10-08 05:54:34 : <SLIP> Updated \I386\dosnet.inf file to support KB921401.
2006-10-08 05:54:34 : <SLIP> QuickStream Cache available for DriverPack MassStorage text mode drivers!
2006-10-08 05:54:37 : <SLIP> Slipstreamed DP MassStorage text mode drivers using QuickStream Cache.
2006-10-08 05:54:47 : <SLIP> Removed entries from \I386\txtsetup.sif that will be updated.
2006-10-08 05:54:48 : <SLIP> Removed entries from \I386\dosnet.inf that will be updated.
2006-10-08 05:55:44 : <SLIP> Updated \I386\dosnet.inf and \I386\txtsetup.sif to support DP MassStorage text mode drivers.
2006-10-08 05:55:45 : <SLIP> Updated \I386\winnt.sif to support method 2.
2006-10-08 05:55:45 : <SLIP> Updated DPsFnshr.ini to enable KTD for all DriverPacks.
2006-10-08 05:55:45 : <SLIP> Updated \$OEM$\cmdlines.txt to execute ROE.exe.
2006-10-08 05:55:45 : <SLIP> Slipstream finished in 1 minutes and 42 seconds.
2006-10-08 05:59:00 : <CLNP> Temporary working directory successfully deleted.
2006-10-08 05:59:00 : Program terminated.15 2006-10-08 22:43:25
Re: [SOLVED, NEEDSREPLY] VIA VT8237R: BSOD before GUI-mode-setup (7 replies, posted in DriverPack Mass Storage)
[General]
; preferred language
prefLang = "Spanish"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons = "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI = "yes"
[Settings]
; disc/bartpe/multibootDisc
instPlatform = "disc"
; trailing backslash is allowed, but not necessary
location = "F:\winv4"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks = "select"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod = "2"
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod = "GUIRunOnce"
; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD = "none"
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC = "yes"
; you should only add this section if you've set [Settings]\DriverPacks to "select"
[SelectDriverPacks]
DP_Chipset = "yes"
DP_CPU = "yes"
DP_Graphics_A = "no"
DP_Graphics_B = "yes"
DP_Graphics_C = "no"
DP_LAN = "yes"
DP_MassStorage = "no"
DP_Sound_A = "yes"
DP_Sound_B = "yes"
DP_WLAN = "yes"
DP_MassStorage_textmode = "yes"
; this section is optional!
[OptionalSettingsOther]
; CCC/CCP, use ATI Catalyst Control Center or ATI Catalyst Control Panel (only relevant when slipstreaming DriverPack Graphics A)
ATI_cpl = "CCC"At final stage I tried with Normal Windows installation and functions, I needed Machine, I'm rebuilding cd from scratch, but I have another 2 problems..... I post it in Support
16 2006-10-07 00:59:37
Re: [SOLVED, NEEDSREPLY] VIA VT8237R: BSOD before GUI-mode-setup (7 replies, posted in DriverPack Mass Storage)
Same problem that vjuyav.
Same Chipsets, MotherBoard Abit SG-85 for AMD Athlon 64 754.CD Seagate Barracuda 7200.9 80Gb SATA2 with jumper for SATA1 (with SATA2 Mode Mb freezes in bios screen)
I tried rebuilding package, rebuilding ISO, reburning CD (in different type of CD) and nothing to do, I tried Activating it in SATA Mode and IDE Mode, and when get to enter Gui Mode, this crashes, this is the error message:
0x0000007B(0xF79D1528,0xC0000034,0x00000000,0x00000000)
I tried Method 2 with text drivers....
this is the errot that handle to me.... for your attention, thanks
17 2006-10-02 08:45:50
Topic: [NEEDS REPLY] Uninstall old drivers..... Install new Drivers (2 replies, posted in Feedback and Support - DriverPacks Base)
I have a Windows XP CD From a friend that have old Mass Storage Drivers packed in (5.10 in fact), but I want to update this version, how I could remove old drivers... I know that I need to remove all .cmds, and OemPNPDrivers in winnt.sif, but another thing I need to remove? sorry, I'm newbie, and thanks...
18 2006-09-26 13:43:27
Re: [NOT APPROVED] Driver.cab reduction and elimination (12 replies, posted in Feature Requests)
ok, I try to do this and test with a few beta tester people, if this works I return here to publish what was removed for anyone that is interest if there is no problem for that... and thanks for the response...
19 2006-09-24 17:24:26
Topic: [NOT APPROVED] Driver.cab reduction and elimination (12 replies, posted in Feature Requests)
I know that driver.cab have Microsoft drivers for some base support, as for example, ATI
Integrating driverpacks, How many and Which of these controllers can be eliminated without problem? (because these are drivers old with respect to the versions that put the package, it is avoided duplicities that could get to generate conflicts and in addition the size of this file is reduced) obviously, after delete of these archives in its respective registries also, for example some that I have identified are those that say atixxxxxxx.xxx but profit not to identify them all, by the attention, thanks and excellent work, I congratulate them