• Registered: 2006-10-07
  • Posts: 5

Topic: [SOLVED] ATIIDE.SYS problem

Hello.

I'm having a problem during the text mode installation stage, just before I can choose the partition where Windows installs. The installer can't find the file ATIIDE.SYS, but the file is really in the I386 folder.

Here are my DPs_BASE.ini and DPs_BASE.log files:

[General] 
prefLang	= "Spanish" 
wizardButtons	= "yes" 
GUI		= "no" 
[Settings] 
instPlatform	= "disc" 
location	= ..\.\TEMP\WINXP 
DriverPacks	= "select" 
DPsMethod	= "2" 
finisherMethod	= "RunOnceEx" 
[RunOnceExSettings] 
startID		= "default" 
[OptionalSettings] 
KTD		= "select" 
KTDlocation	= "C:\WINDOWS\DriverPacks" 
QSC		= "no" 
[SelectDriverPacks] 
DP_Chipset	= "yes" 
DP_CPU		= "yes" 
DP_Graphics_A	= "yes" 
DP_Graphics_B	= "yes" 
DP_Graphics_C	= "yes" 
DP_LAN		= "yes" 
DP_MassStorage	= "yes" 
DP_Sound_A	= "yes" 
DP_Sound_B	= "yes" 
DP_WLAN		= "yes" 
DPs_3rd_party	= "yes" 
DP_MassStorage_textmode = "yes" 
[SelectDriverPacksForKTD] 
DP_Chipset	= "no" 
DP_CPU		= "no" 
DP_Graphics_A	= "no" 
DP_Graphics_B	= "no" 
DP_Graphics_C	= "no" 
DP_LAN		= "no" 
DP_MassStorage	= "yes" 
DP_Sound_A	= "no" 
DP_Sound_B	= "no" 
DP_WLAN		= "yes" 
DPs_3rd_party	= "yes" 
[OptionalSettingsOther] 
ATI_cpl		= "CCC"
2006-10-06 19:16:40 : <INIT> DriverPacks BASE 6.10 initialized.
2006-10-06 19:16:40 : <INIT> Host environment: WIN_XP Service Pack 2 on X86 CPU.
2006-10-06 19:16:40 : <INIT> Imported proxy settings from Internet Explorer.
2006-10-06 19:16:40 : <INIT> Start scanning for DriverPacks for the wnt5_x86-32 platform.
2006-10-06 19:16:40 : <INIT> 	Detected DriverPack Chipset 6.09.1!
2006-10-06 19:16:40 : <INIT> 	Detected DriverPack CPU 6.09.1!
2006-10-06 19:16:40 : <INIT> 	Detected DriverPack Graphics A 6.09.1!
2006-10-06 19:16:40 : <INIT> 	Detected DriverPack Graphics B 6.09!
2006-10-06 19:16:40 : <INIT> 	Detected DriverPack Graphics C 6.09!
2006-10-06 19:16:40 : <INIT> 	Detected DriverPack LAN 6.08.1!
2006-10-06 19:16:40 : <INIT> 	Detected DriverPack MassStorage 6.08!
2006-10-06 19:16:40 : <INIT> 	Detected DriverPack Sound A 6.08.1!
2006-10-06 19:16:40 : <INIT> 	Detected DriverPack Sound B 6.08!
2006-10-06 19:16:40 : <INIT> 	Detected DriverPack WLAN 6.08!
2006-10-06 19:16:40 : <INIT> 	Detected 3rd party DriverPack(s).
2006-10-06 19:16:40 : <INIT> 	Finished scanning.
2006-10-06 19:16:40 : <INIT> Detected settings file "E:\Sistema\DRIVERS\DPs_BASE.ini".
2006-10-06 19:16:40 : <INIT> Windows XP Professional -  Retail SP2 detected.
2006-10-06 19:16:40 : <INIT> The platform wnt5_x86-32_disc will be used (which is the 'disc' installation platform for the OS family 'wnt5_x86-32').
2006-10-06 19:16:40 : <INIT> Imported settings from settings file.
2006-10-06 19:16:40 : <INIT> QuickStream Cache directory not found!
2006-10-06 19:16:40 : <SEL>  Selected module: mod_slip_wxp_x86-32_disc_m2.
2006-10-06 19:16:43 : <PREP> Removed all attributes from \I386.
2006-10-06 19:16:43 : <PREP> Generated \I386\winnt.sif file.
2006-10-06 19:16:43 : <PREP> Created a backup of \I386\txtsetup.sif.
2006-10-06 19:16:43 : <PREP> Created a backup of \I386\dosnet.inf.
2006-10-06 19:16:47 : <PREP> Cleaned up \$OEM$\cmdlines.txt.
2006-10-06 19:16:47 : <PREP> Created temporary working directory.
2006-10-06 19:16:47 : <SLIP> Created necessary directory structure for method 2.
2006-10-06 19:16:48 : <SLIP> Copied files necessary for method 2.
2006-10-06 19:16:49 : <SLIP> Extracted files necessary for method 2.
2006-10-06 19:16:51 : <SLIP> Created \I386\presetup.cmd file.
2006-10-06 19:16:51 : <SLIP> Updated \I386\txtsetup.sif to support method 2.
2006-10-06 19:16:51 : <SLIP> Updated \I386\dosnet.inf to support method 2.
2006-10-06 19:17:41 : <SLIP> Copied DriverPacks to \OEM.
2006-10-06 19:17:47 : <SLIP> Extracted and deleted \I386\svcpack.in_.
2006-10-06 19:17:47 : <SLIP> Updated \I386\svcpack.inf file to support KB888111 and KB921401.
2006-10-06 19:17:52 : <SLIP> Updated \I386\txtsetup.sif file to support KB888111.
2006-10-06 19:17:56 : <SLIP> Updated \I386\dosnet.inf file to support KB888111.
2006-10-06 19:17:58 : <SLIP> Updated \I386\dosnet.inf file to support KB921401.
2006-10-06 19:18:05 : <SLIP> Extracted DriverPack MassStorage to a temporary working directory.
2006-10-06 19:18:37 : <SLIP> Slipstreamed DriverPack MassStorage text mode drivers.
2006-10-06 19:18:52 : <SLIP> Removed entries from \I386\txtsetup.sif that will be updated.
2006-10-06 19:18:56 : <SLIP> Removed entries from \I386\dosnet.inf that will be updated.
2006-10-06 19:20:30 : <SLIP> Updated \I386\dosnet.inf and \I386\txtsetup.sif to support DP MassStorage text mode drivers.
2006-10-06 19:20:30 : <SLIP> Updated \I386\winnt.sif to support method 2.
2006-10-06 19:20:30 : <SLIP> Updated DPsFnshr.ini to enable KTD.
2006-10-06 19:20:30 : <SLIP> Updated DPsFnshr.ini to support the custom KTD cache location you've chosen.
2006-10-06 19:20:30 : <SLIP> Updated \$OEM$\cmdlines.txt to execute ROE.exe.
2006-10-06 19:20:30 : <SLIP> Slipstream finished in 3 minutes and 50 seconds.
2006-10-06 19:20:59 : <CLNP> Temporary working directory successfully deleted.
2006-10-06 19:20:59 : Program terminated.

Thank you in advance for any help.

Best regards

  • From: Hasselt, Belgium
  • Registered: 2006-05-26
  • Posts: 2,609

Re: [SOLVED] ATIIDE.SYS problem

Possibly a bad burn. Please rebuild the ISO and reburn it to your CD-RW or DVD-RW.

Founder of DriverPacks.net — wimleers.com

Wim Leers's Website

  • Registered: 2006-10-07
  • Posts: 5

Re: [SOLVED] ATIIDE.SYS problem

Thank you for your response, but I didn't burn it. I made the iso and tried it with VMware.

  • From: Hasselt, Belgium
  • Registered: 2006-05-26
  • Posts: 2,609

Re: [SOLVED] ATIIDE.SYS problem

lobolopez99 wrote:

Thank you for your response, but I didn't burn it. I made the iso and tried it with VMware.

Then please recreate the ISO.

Founder of DriverPacks.net — wimleers.com

Wim Leers's Website

  • Registered: 2006-09-23
  • Posts: 19

Re: [SOLVED] ATIIDE.SYS problem

Same problem, I burned it, and another problem added, my svcpack.inf was corrupted, I copy my "before drivers" svcpack.inf and added 2 lines, refeent to cats for sound driver.

I burned it in low speed constructed with cdimage CD, and same problem, ATIIDE.sys was not found...

INI

[General]
; preferred language
prefLang	= "Spanish"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons	= "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI		= "yes"


[Settings]
; disc/bartpe/multibootDisc
instPlatform	= "disc"
; trailing backslash is allowed, but not necessary
location	= "H:\wxpB2es_5cd"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks	= "select"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod	= "2"
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod	= "RunOnceEx"


; you should only add this section if you've set [Settings]\finishMethod to "RunOnceEx"
[RunOnceExSettings]
; custom/default, if not specified: default
startID		= "custom"
; anything you wish ...
customStartID	= "23"


; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD		= "all"
; <path>, to specify a custom KTD cache location, if not specified: default (%SystemRoot%\DriverPacks)
KTDlocation	= "%SystemRoot%\DriverPacks"
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC		= "yes"


; you should only add this section if you've set [Settings]\DriverPacks to "select"
[SelectDriverPacks]
DP_Chipset	= "yes"
DP_CPU		= "yes"
DP_Graphics_A	= "no"
DP_Graphics_B	= "yes"
DP_Graphics_C	= "no"
DP_LAN		= "yes"
DP_MassStorage	= "yes"
DP_Sound_A	= "yes"
DP_Sound_B	= "yes"
DP_WLAN		= "yes"
DP_MassStorage_textmode = "yes"


; this section is optional!
[OptionalSettingsOther]
; CCC/CCP, use ATI Catalyst Control Center or ATI Catalyst Control Panel (only relevant when slipstreaming DriverPack Graphics A)
ATI_cpl		= "CCC"

LOG

2006-10-08 05:53:29 : <INIT> DriverPacks BASE 6.10 initialized.
2006-10-08 05:53:29 : <INIT> Host environment: WIN_XP Service Pack 2 on X86 CPU.
2006-10-08 05:53:29 : <INIT> Imported proxy settings from Internet Explorer.
2006-10-08 05:53:29 : <INIT> Start scanning for DriverPacks for the wnt5_x86-32 platform.
2006-10-08 05:53:29 : <INIT> 	Detected DriverPack Chipset 6.09.1!
2006-10-08 05:53:29 : <INIT> 	Detected DriverPack CPU 6.09.1!
2006-10-08 05:53:29 : <INIT> 	Detected DriverPack Graphics A 6.09.1!
2006-10-08 05:53:29 : <INIT> 	Detected DriverPack Graphics B 6.09!
2006-10-08 05:53:29 : <INIT> 	Detected DriverPack Graphics C 6.09!
2006-10-08 05:53:29 : <INIT> 	Detected DriverPack LAN 6.08.1!
2006-10-08 05:53:29 : <INIT> 	Detected DriverPack MassStorage 6.08!
2006-10-08 05:53:29 : <INIT> 	Detected DriverPack Sound A 6.08.1!
2006-10-08 05:53:29 : <INIT> 	Detected DriverPack Sound B 6.08!
2006-10-08 05:53:29 : <INIT> 	Detected DriverPack WLAN 6.08!
2006-10-08 05:53:29 : <INIT> 	Could not detect any 3rd party DriverPacks.
2006-10-08 05:53:29 : <INIT> 	Finished scanning.
2006-10-08 05:53:29 : <INIT> Detected settings file "H:\driverpacks\DPs_BASE.ini".
2006-10-08 05:53:29 : <INIT> Windows XP Professional -  OEM SP2 detected.
2006-10-08 05:53:29 : <INIT> The platform wnt5_x86-32_disc will be used (which is the 'disc' installation platform for the OS family 'wnt5_x86-32').
2006-10-08 05:53:29 : <INIT> Imported settings from settings file.
2006-10-08 05:53:29 : <GUI>  Initialized GUI.
2006-10-08 05:53:30 : <GUI>  Created a list of all available language files.
2006-10-08 05:53:30 : <GUI>  Set the last used language, Spanish, as the GUI language.
2006-10-08 05:54:03 : <GUI>  Saved settings!
2006-10-08 05:54:03 : <GUI>  Closed GUI.
2006-10-08 05:54:03 : <SEL>  Selected module: mod_slip_wxp_x86-32_disc_m2.
2006-10-08 05:54:05 : <PREP> Removed all attributes from \I386.
2006-10-08 05:54:05 : <PREP> Created a backup of \I386\winnt.sif.
2006-10-08 05:54:06 : <PREP> Created a backup of \I386\txtsetup.sif.
2006-10-08 05:54:06 : <PREP> Created a backup of \I386\dosnet.inf.
2006-10-08 05:54:06 : <PREP> Cleaned up \$OEM$\cmdlines.txt.
2006-10-08 05:54:07 : <PREP> Created temporary working directory.
2006-10-08 05:54:07 : <SLIP> Created necessary directory structure for method 2.
2006-10-08 05:54:07 : <SLIP> Copied files necessary for method 2.
2006-10-08 05:54:07 : <SLIP> Extracted files necessary for method 2.
2006-10-08 05:54:08 : <SLIP> Created \I386\presetup.cmd file.
2006-10-08 05:54:08 : <SLIP> Updated \I386\txtsetup.sif to support method 2.
2006-10-08 05:54:09 : <SLIP> Updated \I386\dosnet.inf to support method 2.
2006-10-08 05:54:26 : <SLIP> Copied DriverPacks to \OEM.
2006-10-08 05:54:28 : <SLIP> Extracted and deleted \I386\svcpack.in_.
2006-10-08 05:54:28 : <SLIP> Updated \I386\svcpack.inf file to support KB888111 and KB921401.
2006-10-08 05:54:30 : <SLIP> Updated \I386\txtsetup.sif file to support KB888111.
2006-10-08 05:54:33 : <SLIP> Updated \I386\dosnet.inf file to support KB888111.
2006-10-08 05:54:34 : <SLIP> Updated \I386\dosnet.inf file to support KB921401.
2006-10-08 05:54:34 : <SLIP> QuickStream Cache available for DriverPack MassStorage text mode drivers!
2006-10-08 05:54:37 : <SLIP> Slipstreamed DP MassStorage text mode drivers using QuickStream Cache.
2006-10-08 05:54:47 : <SLIP> Removed entries from \I386\txtsetup.sif that will be updated.
2006-10-08 05:54:48 : <SLIP> Removed entries from \I386\dosnet.inf that will be updated.
2006-10-08 05:55:44 : <SLIP> Updated \I386\dosnet.inf and \I386\txtsetup.sif to support DP MassStorage text mode drivers.
2006-10-08 05:55:45 : <SLIP> Updated \I386\winnt.sif to support method 2.
2006-10-08 05:55:45 : <SLIP> Updated DPsFnshr.ini to enable KTD for all DriverPacks.
2006-10-08 05:55:45 : <SLIP> Updated \$OEM$\cmdlines.txt to execute ROE.exe.
2006-10-08 05:55:45 : <SLIP> Slipstream finished in 1 minutes and 42 seconds.
2006-10-08 05:59:00 : <CLNP> Temporary working directory successfully deleted.
2006-10-08 05:59:00 : Program terminated.
  • Registered: 2006-10-07
  • Posts: 5

Re: [SOLVED] ATIIDE.SYS problem

I've rebuilded the ISO many times and always the same problem.

Thank you

Last edited by lobolopez99 (2006-10-09 05:54:55)

  • Registered: 2006-09-23
  • Posts: 19

Re: [SOLVED] ATIIDE.SYS problem

Solved, my mistake, I have another folder with boot sector... VOL2, and I needed to move from I386 to VOL2 to function, sorry, but the another problem stills, I post in bugtracker...

  • Registered: 2006-10-07
  • Posts: 5

Re: [SOLVED] ATIIDE.SYS problem

Ok, solved for me too. Thanks Bionicmaster for the clue. I'm making a multiboot DVD, and my boot folder hadn't the updated files. So, the solution is copy all the updated *.SY_  files from I386 to the boot folder and all works fine.

Thank you

  • From: Hasselt, Belgium
  • Registered: 2006-05-26
  • Posts: 2,609

Re: [SOLVED] ATIIDE.SYS problem

Please mention next time in your first post that you're using a multibootDisc. That's a critical difference! wink

Founder of DriverPacks.net — wimleers.com

Wim Leers's Website