hello waht did you want to discuss? the service pack 3 or that driverpacks support xp with sp3?

i have tried it but on xp sp3 driverpack can´t be installed. it say during installation of KB888111  that sp2 must be installed. but all sp are slipstreamed. sp1  and sp2 and sp3. but itt dosen´t work...

any help ?

i will try it with OSC on

ok tested nothing works ..

not at ATA mode
not at RAID mode
in bios

figured out that the problem was the massstorage pack 7.09.1 with the 7.09 it works fine...  have post it in the other group.

i have figured out that there is something wrong in the driverpack. if i use this driverpack, then textmode install  didn´t work. setup can´t find harddrives for install if they connected on the Promise PDC 20276.

with driverpack 7.09 it works..

After update to all the new driverpacks , i can´t installed  xp on a mass storage controller, setup didn´t found any drives  now.

i used xp with sereby´s updatepack 1791 and nlite.. 

with the driverpacks befor it works fine and without anyproblem.

; preferred language
prefLang	= "English"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons	= "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI		= "yes"

; disc/bartpe/multibootDisc
instPlatform	= "disc"
; trailing backslash is allowed, but not necessary
location	= "J:\Image_F\xp_pro\xppro_updatepack_1791_nlite_treiber_wpa"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks	= "select"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod	= "2"
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod	= "GUIRunOnce"

; this section is optional!
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD		= "all"
; <path>, to specify a custom KTD cache location, if not specified: default (%SystemRoot%\DriverPacks)
KTDlocation	= "%SystemRoot%\DriverPacks"
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC		= "no"

; you should only add this section if you've set [Settings]\DriverPacks to "select"
DP_Chipset	= "yes"
DP_CPU		= "yes"
DP_Graphics_A	= "yes"
DP_Graphics_B	= "yes"
DP_Graphics_C	= "yes"
DP_LAN		= "yes"
DP_MassStorage	= "yes"
DP_Sound_A	= "yes"
DP_Sound_B	= "yes"
DP_WLAN		= "yes"
DP_MassStorage_textmode = "yes"

; this section is optional!
; CCC/CCP, use ATI Catalyst Control Center or ATI Catalyst Control Panel (only relevant when slipstreaming DriverPack Graphics A)
ATI_cpl		= "CCC"
2007-09-18 13:19:00 : <INIT> DriverPacks BASE 7.05.2 initialized.
2007-09-18 13:19:00 : <INIT> Host environment: WIN_XP Service Pack 2 on X86 CPU.
2007-09-18 13:19:00 : <INIT> Created temporary working directory.
2007-09-18 13:19:00 : <INIT> Imported proxy settings from Internet Explorer.
2007-09-18 13:19:00 : <INIT> Start scanning for DriverPacks for the wnt5_x86-32 platform.
2007-09-18 13:19:00 : <INIT> 	Detected DriverPack Chipset 7.09!
2007-09-18 13:19:00 : <INIT> 	Detected DriverPack CPU 7.04.1!
2007-09-18 13:19:00 : <INIT> 	Detected DriverPack Graphics A 7.09.1!
2007-09-18 13:19:00 : <INIT> 	Detected DriverPack Graphics B 7.09.2!
2007-09-18 13:19:00 : <INIT> 	Detected DriverPack Graphics C 7.09.1!
2007-09-18 13:19:00 : <INIT> 	Detected DriverPack LAN 7.09.1!
2007-09-18 13:19:00 : <INIT> 	Detected DriverPack MassStorage 7.09.1!
2007-09-18 13:19:00 : <INIT> 	Detected DriverPack Sound A 7.09!
2007-09-18 13:19:00 : <INIT> 	Detected DriverPack Sound B 7.07.1!
2007-09-18 13:19:00 : <INIT> 	Detected DriverPack WLAN 7.09.1!
2007-09-18 13:19:00 : <INIT> 	Could not detect any 3rd party DriverPacks.
2007-09-18 13:19:00 : <INIT> 	Finished scanning.
2007-09-18 13:19:00 : <INIT> Detected settings file "J:\Image_F\Bâshrat the Sneaky\DPs_BASE.ini".
2007-09-18 13:19:00 : <INIT> Windows XP Professional -  OEM SP2 detected.
2007-09-18 13:19:00 : <INIT> The platform wnt5_x86-32_disc will be used (which is the 'disc' installation platform for the OS family 'wnt5_x86-32').
2007-09-18 13:19:00 : <INIT> Imported settings from settings file.
2007-09-18 13:19:00 : <GUI>  Initialized GUI.
2007-09-18 13:19:00 : <GUI>  Created a list of all available language files.
2007-09-18 13:19:00 : <GUI>  Set the last used language, English, as the GUI language.
2007-09-18 13:22:51 : <GUI>  Refreshed UpdateChecker with success.
2007-09-18 13:22:54 : <GUI>  Saved settings!
2007-09-18 13:22:54 : <GUI>  Closed GUI.
2007-09-18 13:22:54 : <SEL>  Selected module: mod_slip_wxp_x86-32_disc_m2.
2007-09-18 13:22:58 : <PREP> Extracted DriverPack MassStorage to a temporary working directory.
2007-09-18 13:23:01 : <PREP> Removed all attributes from \I386.
2007-09-18 13:23:01 : <PREP> Created a backup of \I386\winnt.sif.
2007-09-18 13:23:01 : <PREP> Created a backup of \I386\txtsetup.sif.
2007-09-18 13:23:01 : <PREP> Created a backup of \I386\dosnet.inf.
2007-09-18 13:23:01 : <PREP> Cleaned up \$OEM$\cmdlines.txt.
2007-09-18 13:23:01 : <SLIP> Created necessary directory structure for method 2.
2007-09-18 13:23:01 : <SLIP> Copied files necessary for method 2.
2007-09-18 13:23:02 : <SLIP> Extracted files necessary for method 2.
2007-09-18 13:23:02 : <SLIP> Created \I386\presetup.cmd file.
2007-09-18 13:23:02 : <SLIP> Updated \I386\txtsetup.sif to support method 2.
2007-09-18 13:23:02 : <SLIP> Updated \I386\dosnet.inf to support method 2.
2007-09-18 13:23:29 : <SLIP> Copied DriverPacks to \OEM.
2007-09-18 13:23:29 : <SLIP> German (Sereby's) UpdatePack detected: no HDA hotfix will be slipstreamed.
2007-09-18 13:23:55 : <SLIP> Slipstreamed DriverPack MassStorage text mode driver files.
2007-09-18 13:24:03 : <SLIP> Removed entries from \I386\txtsetup.sif that will be updated.
2007-09-18 13:24:05 : <SLIP> Removed entries from \I386\dosnet.inf that will be updated.
2007-09-18 13:25:03 : <SLIP> Updated \I386\dosnet.inf and \I386\txtsetup.sif to support DP MassStorage text mode drivers.
2007-09-18 13:25:03 : <SLIP> Updated \I386\winnt.sif to support method 2.
2007-09-18 13:25:03 : <SLIP> Updated DPsFnshr.ini to enable KTD for all DriverPacks.
2007-09-18 13:25:03 : <SLIP> Updated \I386\winnt.sif's GUIRunOnce section.
2007-09-18 13:25:04 : <SLIP> Slipstream finished in 2 minutes and 10 seconds.
2007-09-18 13:26:13 : <CLNP> Temporary working directory successfully deleted.
2007-09-18 13:26:13 : Program terminated.

any help ?

did you know this provider?


i have this  platin version ..

or look at this


would this fit your wishes?


you know it ?


(6 replies, posted in DriverPack CPU)

can be dl  here :

<link removed>


(1 replies, posted in DriverPack Chipset)

can be dl here :

<link removed>


(22 replies, posted in DriverPack Graphics)

now it works why you block IP´s?


(22 replies, posted in DriverPack Graphics)

put it on rapiudshare oder anywhere else ..


here you have a list of filehoster


otherwise no one can dl your files from the other page ..

i think you must control the rights and permission on your page ..  seems to be not correct fr others than you ..


(22 replies, posted in DriverPack Graphics)

please put them back to driverpack.net and the it works ..


(22 replies, posted in DriverPack Graphics)

it still dosen´t work....  some other driver packs give the same error, in earlier time all works ...
i tried it with netscape broswer and IE 6.

need help...

all driverpacks from this side:


couldn´t be dl :-(

@ helmi:
i wrote several time how i make my xp cd didn´t i?
here again :-(
1. clean german xp sp2 source home or pro
2. then update with sereby´s updatepack with no addon´s only with option delete kb*.cat
3. then i make from this xp-base with nlite the konfiguration
4. now i supply the driverpack.
5. burn cd

get the desktop.ini issue


as i know the desktop.ini files are in every folder , so there are different content, the problem would be that something during KTD would be break the prozess to set the right attributes to them so they are visible. and only in the autostart folder there is the effekt that the file was shown in editor.  if you set your folder option so that every file would be shown so you see that there is in any folder in the startupmenu a desktop.ini file.

run this script at the startup of windows

copy %SYSTEMDRIVE%\windows\wegini.bat %VERK2PATH%\Startm~1\Progra~1\Autost~1\wegini.bat"

copy this batch with OEM methode to windir name: wegini.bat

@echo off
CD /D %Verk3PATH%\Startm~1\
ATTRIB.EXE +R +A +S +H desktop.ini /S /D
DEL /f /q %Verk3PATH%\Startm~1\Progra~1\Autost~1\wegini.bat

this set the attribs from the desktop.ini files right , but at the first startup it pops up on time , because i didn´t find a way to let run my script in autostartfolder bevor the popup comes.

what is so hard to understand ?  why i should every time slipstream the updatepack to test some funktions in nlite ?  so i have a  base allready slipstreamd with the updatepack and now it is faster for testing new things , because i didn´t slipstream the updatepack again and again ...

for doing this in 2 steps reason is simple: for testing nlite ist saves much time  to integrate the updatepack bevor  so i have a ready base to start with nlite ..

@helmi and jtdoom:
please look if you  have also a desktop.ini in the startupmenues of the current user..
today i recognize that there are also visible desktop.ini files in PROGRAMME, STARTMENU and so  on...
all the time we have our eys ion the desktop.ini in th autostart but there are also in the other folders.
seems to be a problem during KTD setup

best are both ...
i integrate serebys´by his own program, than i make konfig with nlite , and then i submit driverpack ,and always get the desktop.ini  issue .

always first nlite than driverpack ..

i think i ask for more than one time , how you integrate sereby´s updatepack, and why you didn´t post your konfig here so i can use it to test it on my maschine?

but i wil try it nevertheless because helmi says that the same konfig at him works and at me not . so i do my own test to figure out if it works with all KTD and with not KTD  i willnot unpack or half an half driverpacks. only KTD or not anything else make no sense  for me to test .

@helmi: you are testing on a virtual pc , i test on a real machine.
and as i so ofte nsay is i change nothing of the konfig only the base ... and with 6.086 i got not the desktop issue and with any base newer than 6.086 i got it. also with home and pro. so no one can say this depends on serebys or nlite or anything else, except on the base..
i will try a base 6.10 KTD all and a base  6.10 not KTD all to see  the effects. and then we see if it was base fault or not.

it seems that here many people couldn´t read and are blind.

if this people would read the threads carefully they would know that they wrote sh*t. who ofte n should i say the same?

wit ha xp pro sp2 without anything else  only base 6.10 it give the desktop issue
and with the base 6.086 not ..
why is this so hard to understand ?

and also with sereby´s pack  the same effekts ..

this is not the solution!
i want it hasslefree so i used base 6.086 for xp pro and home and it works fine .. i wait for the next base release and then i triy this.