Search options (Page 1 of 2)

I've tested Base 7.05.2, Chipset 706 and MassStorage 7071 (7072 doesn't work on my Gigabyte P965 DS4) on my second machine (Asus M2N4-SLI, nForce4, SATA drive) and it gives no BSOD.
Maxximum, maybe you should check the RAMs of your PC (memtest).

Tested MassStorage 7.07.2 on my Gigabyte P965 DS4, the jmicron will be loaded during txtsetup instead of iastor.
jtdoom, we had this problem once before...
With MassStorage 7.07.1 it was o.K.
I've made a look in the D\M\IN folders. There are several changes since 7.07.1 for the Intel-drivers, and also the cat-files are missing.

Hi jtdoom,

I'm sure.
Http://www.jmicron.com.tw/Driver.htm
Vers. 1.17.20.03

Hi Skillz and welcome to the forum!

A new MassStorage Pack is in testmode.
With my Board (Gigabyte P965 DS4, Intel P965) there will be no BSOD.
What mainboard is in your system?

reini.m

Hi jtdoom,

I'll test the pack.
My self-edited pack installs during the txtmode the MSM6.2.1 and in WinXP also.

@ Helmi
I've tried this before but there is'nt a email under his profile. Also not in the member list.
Only a link to driverpacks website...

reini.m

I've made a test and put MSM 6.2 in M\IN\1, 5.5 in M\IN\1\A and 7.5 in M\IN\1\B, by editing the names of the INF- and the SYS-Files. Also edited the MassStorage.ini and put the HW-ID for my ICH8R to the 6.2.
With this the MSM 6.2 is installed during the textmode setup.
I will make a full setup next time to see if MSM 7.5 will be installed in WinXP.
Must make an image of my system before that...

reini.m

@maxximum
JMicron ist activated and configured as IDE in BIOS. I don't need AHCI für JMicron because no Harddisks are plugged on it, only a DVD-ROM and a DVD-Writer.
AHCI is enabled for the ICH8R in BIOS, 2 SATA-Harddisks are connected on it.
With the MSM 6.2.1 the installation during textmode setup is o.k. and iastor is loaded correctly.
Since MSM 7.0.0 something going wrong, the iastor is'nt loaded anymore.
The textmode setup loads the jraid and recognize my harddisks on jraid instead of iastor, but my harddisks are definitely plugged on ICH8R.
I know that the PCI\VEN_8086&DEV_2821 ist listed in DP.ini and it's also listed in the iaahci.inf in M\in\1.
I don't know what's going wrong with the MSM-Drivers since the 7.0.0 and I've made many tests for myself with this drivers, but no solution yet.
Only with MSM 6.2.1 it works.
Maybe a problem only with Gigabyte Boards?

reini.m

Hi jtdoom,

Test3 not working too on my Gigabyte P965 DS4. Jraid is installed...
For the Jmicron there exist an newer driver than in the driverpack at the Jmicron Website, Ver. 1.17.18.07.
Maybe try a test with this one??

Thanks for your hard work!

reini.m

Edit: I've made a test by disabling the JMicron in the ini. Result: the iastor 7.5.1017 was not installed, my harddisks were recognized at 'unknown'.
So the problem would be the Intel-Driver 7.5.1017.

Hi jtdoom,

I've tested the storage706test1 on my Gigabyte P965 DS4. Problem: the iastor55 gets installed.
But maybe I've found the mistake: there is a wrong Hardware-ID in the ini-file inside [IN-1-A], called PCI\VEN_8086&DEV_2821&CC_0106. I have not found this ID inside the iaahci.inf in IN\1\A.
PCI\VEN_8086&DEV_2821&CC_0106 is the correct ID for my board and ist should install the iastor75.
I've edited the ini for myself and will make a test soon.

reini.m

Hi jtdoom,

I tested an installation with the DP_MassStorage_wnt5_x86-32_7059test4 on my system (Gigabyte P965 DS4). On the screen before formatting the drives it will recognize my HDs on jraid instead of iastore...
So it will not work at all. With the latest official MassStoragePack 7.05 (iastore Vers. 6.2 i think) it works.
There is a problem with the newest iastore. I´ve made a test with the iastore Vers. 7.0 - same problem. Only with the 6.2 it´s o.K.

reini.m