• From: Russia
  • Registered: 2006-06-14
  • Posts: 326

Topic: [SOLVED] Intel DP965LT Mobo & onboard Marvell IDE Controller

Marvell RAID 614x SATA2 Controller HWID is: PCI\VEN_11AB&DEV_6101&CC_0104
Marvell 88SE6101 on Intel DP965LT HWID is:  PCI\VEN_11AB&DEV_6101&CC_0101

Problem: load wrong driver and bsod before partition select.

Last edited by Debugger (2006-12-04 20:03:49)

  • From: Hasselt, Belgium
  • Registered: 2006-05-26
  • Posts: 2,609

Re: [SOLVED] Intel DP965LT Mobo & onboard Marvell IDE Controller

Which driver is loaded then?

Founder of DriverPacks.net — wimleers.com

Wim Leers's Website

  • From: Russia
  • Registered: 2006-06-14
  • Posts: 326

Re: [SOLVED] Intel DP965LT Mobo & onboard Marvell IDE Controller

Loaded RAID Driver. But driver NOT needed! Without DP Windows loaded standard IDE driver, and all OK.

  • sabre
  • DriverPacks newbie
  • Offline
  • Registered: 2006-12-08
  • Posts: 1

Re: [SOLVED] Intel DP965LT Mobo & onboard Marvell IDE Controller

I'm seeing a similar issue with an Intel DG965RY motherboard. BSOD after loading drivers, before setting partitions.

HWID's below

===========
PCI devices
===========
PCI\VEN_104C&DEV_8023&SUBSYS_514D8086&REV_00\4&35FAE160&0&18F0: Texas Instruments OHCI Compliant IEEE 1394 Host Controller
PCI\VEN_10DE&DEV_0295&SUBSYS_2A68107D&REV_A1\4&31E9B436&0&0008: WinFast 7950 GT(NVIDIA)
PCI\VEN_11AB&DEV_6101&SUBSYS_610111AB&REV_B1\4&AB208E&0&00E1: Standard Dual Channel PCI IDE Controller
PCI\VEN_8086&DEV_104B&SUBSYS_00018086&REV_02\3&61AAA01&0&C8 : Intel(R) 82566DC Gigabit Network Connection
PCI\VEN_8086&DEV_244E&SUBSYS_00000000&REV_F2\3&61AAA01&0&F0 : Intel(R) 82801 PCI Bridge - 244E
PCI\VEN_8086&DEV_2810&SUBSYS_00000000&REV_02\3&61AAA01&0&F8 : Intel(R) ICH8/ICH8R Family LPC Interface Controller - 2810
PCI\VEN_8086&DEV_2820&SUBSYS_514D8086&REV_02\3&61AAA01&0&FA : Intel(R) ICH8 4 port Serial ATA Storage Controller - 2820
PCI\VEN_8086&DEV_2825&SUBSYS_514D8086&REV_02\3&61AAA01&0&FD : Intel(R) ICH8 2 port Serial ATA Storage Controller - 2825
PCI\VEN_8086&DEV_2830&SUBSYS_514D8086&REV_02\3&61AAA01&0&E8 : Intel(R) ICH8 Family USB Universal Host Controller - 2830
PCI\VEN_8086&DEV_2831&SUBSYS_514D8086&REV_02\3&61AAA01&0&E9 : Intel(R) ICH8 Family USB Universal Host Controller - 2831
PCI\VEN_8086&DEV_2832&SUBSYS_514D8086&REV_02\3&61AAA01&0&EA : Intel(R) ICH8 Family USB Universal Host Controller - 2832
PCI\VEN_8086&DEV_2834&SUBSYS_514D8086&REV_02\3&61AAA01&0&D0 : Intel(R) ICH8 Family USB Universal Host Controller - 2834
PCI\VEN_8086&DEV_2835&SUBSYS_514D8086&REV_02\3&61AAA01&0&D1 : Intel(R) ICH8 Family USB Universal Host Controller - 2835
PCI\VEN_8086&DEV_2836&SUBSYS_514D8086&REV_02\3&61AAA01&0&EF : Intel(R) ICH8 Family USB2 Enhanced Host Controller - 2836
PCI\VEN_8086&DEV_283A&SUBSYS_514D8086&REV_02\3&61AAA01&0&D7 : Intel(R) ICH8 Family USB2 Enhanced Host Controller - 283A
PCI\VEN_8086&DEV_283E&SUBSYS_514D8086&REV_02\3&61AAA01&0&FB : Intel(R) ICH8 Family SMBus Controller - 283E
PCI\VEN_8086&DEV_283F&SUBSYS_00000000&REV_02\3&61AAA01&0&E0 : Intel(R) ICH8 Family PCI Express Root Port 1 - 283F
PCI\VEN_8086&DEV_2841&SUBSYS_00000000&REV_02\3&61AAA01&0&E1 : Intel(R) ICH8 Family PCI Express Root Port 2 - 2841
PCI\VEN_8086&DEV_2843&SUBSYS_00000000&REV_02\3&61AAA01&0&E2 : Intel(R) ICH8 Family PCI Express Root Port 3 - 2843
PCI\VEN_8086&DEV_2845&SUBSYS_00000000&REV_02\3&61AAA01&0&E3 : Intel(R) ICH8 Family PCI Express Root Port 4 - 2845
PCI\VEN_8086&DEV_2847&SUBSYS_00000000&REV_02\3&61AAA01&0&E4 : Intel(R) ICH8 Family PCI Express Root Port 5 - 2847
PCI\VEN_8086&DEV_284B&SUBSYS_21118086&REV_02\3&61AAA01&0&D8 : Microsoft UAA Bus Driver for High Definition Audio
PCI\VEN_8086&DEV_29A0&SUBSYS_00000000&REV_02\3&61AAA01&0&00 : Intel(R) P965/G965 Processor to I/O Controller - 29A0
PCI\VEN_8086&DEV_29A1&SUBSYS_00000000&REV_02\3&61AAA01&0&08 : Intel(R) P965/G965 PCI Express Root Port - 29A1
PCI\VEN_8086&DEV_29A4&SUBSYS_514D8086&REV_02\3&61AAA01&0&18 : Intel(R) Management Engine Interface
25 matching device(s) found.

===========
USB devices
===========

USB\ROOT_HUB\4&16B83DFE&0                                   : USB Root Hub
USB\ROOT_HUB\4&1B4F5E7D&0                                   : USB Root Hub
USB\ROOT_HUB\4&2409C2B2&0                                   : USB Root Hub
USB\ROOT_HUB\4&28066849&0                                   : USB Root Hub
USB\ROOT_HUB\4&2EBC672E&0                                   : USB Root Hub
USB\ROOT_HUB20\4&18F705C8&0                                 : USB Root Hub
USB\ROOT_HUB20\4&3B6CB9D3&0                                 : USB Root Hub
7 matching device(s) found.

  • From: Russia
  • Registered: 2006-06-14
  • Posts: 326

Re: [SOLVED] Intel DP965LT Mobo & onboard Marvell IDE Controller

sabre, it is a same situation.

I suppose, it is necessary to make empty inf-file with HWID PCI\VEN_11AB&DEV_6101&SUBSYS_610111AB, which will load common atapi.sys. Who can make it?

  • OverFlow
  • DriverPacks Administrator & BASE Developer
  • Offline
  • From: Cincinnati
  • Registered: 2006-12-02
  • Posts: 6,730

Re: [SOLVED] Intel DP965LT Mobo & onboard Marvell IDE Controller

the current driver is dated jan 2006 try and find a newer one and I'll put it in the mix for testing and release

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

OverFlow's Website

  • iSmart
  • DriverPacks newbie
  • Offline
  • From: Russia, Novosibirsk
  • Registered: 2006-09-29
  • Posts: 2

Re: [SOLVED] Intel DP965LT Mobo & onboard Marvell IDE Controller

Just change lines in txtsetup.sif to something like this:

PCI\VEN_11AB&DEV_6141&CC_0104 = "mv614x"
PCI\VEN_11AB&DEV_6140&CC_0104 = "mv614x"
PCI\VEN_11AB&DEV_6121&CC_0104 = "mv614x"
PCI\VEN_11AB&DEV_6120&CC_0104 = "mv614x"
PCI\VEN_11AB&DEV_6111&CC_0104 = "mv614x"
PCI\VEN_11AB&DEV_6101&CC_0104 = "mv614x"
PCI\VEN_11AB&DEV_6141&CC_0106 = "mv614x"
PCI\VEN_11AB&DEV_6140&CC_0106 = "mv614x"
PCI\VEN_11AB&DEV_6121&CC_0106 = "mv614x"
PCI\VEN_11AB&DEV_6120&CC_0106 = "mv614x"
PCI\VEN_11AB&DEV_6111&CC_0106 = "mv614x"
PCI\VEN_11AB&DEV_6101&CC_0106 = "mv614x"
PCI\VEN_11AB&DEV_6141&CC_0101 = "pciide"
PCI\VEN_11AB&DEV_6140&CC_0101 = "pciide"
PCI\VEN_11AB&DEV_6121&CC_0101 = "pciide"
PCI\VEN_11AB&DEV_6120&CC_0101 = "pciide"
PCI\VEN_11AB&DEV_6111&CC_0101 = "pciide"
PCI\VEN_11AB&DEV_6101&CC_0101 = "pciide"

Last edited by iSmart (2006-12-10 23:02:50)

  • muiz
  • Vista / 7/8 Driverpacks Team
  • Offline
  • From: Netherlands
  • Registered: 2006-07-01
  • Posts: 1,555

Re: [SOLVED] Intel DP965LT Mobo & onboard Marvell IDE Controller

iSmart wrote:

Just change lines in txtsetup.sif to something like this:

PCI\VEN_11AB&DEV_6141&CC_0104 = "mv614x"
PCI\VEN_11AB&DEV_6140&CC_0104 = "mv614x"
PCI\VEN_11AB&DEV_6121&CC_0104 = "mv614x"
PCI\VEN_11AB&DEV_6120&CC_0104 = "mv614x"
PCI\VEN_11AB&DEV_6111&CC_0104 = "mv614x"
PCI\VEN_11AB&DEV_6101&CC_0104 = "mv614x"
PCI\VEN_11AB&DEV_6141&CC_0106 = "mv614x"
PCI\VEN_11AB&DEV_6140&CC_0106 = "mv614x"
PCI\VEN_11AB&DEV_6121&CC_0106 = "mv614x"
PCI\VEN_11AB&DEV_6120&CC_0106 = "mv614x"
PCI\VEN_11AB&DEV_6111&CC_0106 = "mv614x"
PCI\VEN_11AB&DEV_6101&CC_0106 = "mv614x"
PCI\VEN_11AB&DEV_6141&CC_0101 = "pciide"
PCI\VEN_11AB&DEV_6140&CC_0101 = "pciide"
PCI\VEN_11AB&DEV_6121&CC_0101 = "pciide"
PCI\VEN_11AB&DEV_6120&CC_0101 = "pciide"
PCI\VEN_11AB&DEV_6111&CC_0101 = "pciide"
PCI\VEN_11AB&DEV_6101&CC_0101 = "pciide"

??

http://d1syubgj0w3cyv.cloudfront.net/cdn/farfuture/VVyo3dzRp1allVk-OCdyukcaj701mcdrrsdDOyX2wK8/perpetual:forever/userbar/admin-1.png
DONATE!
HWID's Tool     Read BEFORE you post
  • From: Russia
  • Registered: 2006-06-14
  • Posts: 326

Re: [SOLVED] Intel DP965LT Mobo & onboard Marvell IDE Controller

muiz, he means assigning to problem hwids of common ide driver, atapi. its could be work...

  • Registered: 2006-12-22
  • Posts: 4

Re: [SOLVED] Intel DP965LT Mobo & onboard Marvell IDE Controller

+1 on the problem for me. Driverpacks bsods my windows disk before getting to the partition screen.
relevant hardware:
intel 965 chipset gigabyte 965p-ds3 rev2.0 with Jmicron JMB36X Raid &  Silicon Image SiI 0680 Ultra-133 Medley ATA Raid Controller mass storage devices. I also have 2 36gb wd raptor drives in raid 0 connected to the jmb controller that are intended to house the OS.

hwids:

 
=========== 
PCI devices 
=========== 
 
 
PCI\VEN_1095&DEV_0680&SUBSYS_36801095&REV_02\4&20E0FF6A&0&08F0: Silicon Image SiI 0680 Ultra-133 Medley ATA Raid Controller
PCI\VEN_10DE&DEV_0140&SUBSYS_21181682&REV_A2\4&2CCDD017&0&0008: NVIDIA GeForce 6600 GT
PCI\VEN_1102&DEV_0002&SUBSYS_80641102&REV_07\4&20E0FF6A&0&00F0: Creative SB Live! Series (WDM)
PCI\VEN_1102&DEV_7002&SUBSYS_00201102&REV_07\4&20E0FF6A&0&01F0: Creative SBLive! Gameport
PCI\VEN_11AB&DEV_4364&SUBSYS_E0001458&REV_12\4&19FEE395&0&00E4: Marvell Yukon 88E8056 PCI-E Gigabit Ethernet Controller
PCI\VEN_197B&DEV_2363&SUBSYS_B0001458&REV_02\4&A678335&0&00E3: GIGABYTE GBB36X Controller
PCI\VEN_197B&DEV_2363&SUBSYS_B0001458&REV_02\4&A678335&0&01E3: Standard Dual Channel PCI IDE Controller
PCI\VEN_8086&DEV_244E&SUBSYS_00000000&REV_F2\3&13C0B0C5&0&F0: Intel(R) 82801 PCI Bridge - 244E
PCI\VEN_8086&DEV_2810&SUBSYS_00000000&REV_02\3&13C0B0C5&0&F8: Intel(R) ICH8/ICH8R Family LPC Interface Controller - 2810
PCI\VEN_8086&DEV_2820&SUBSYS_B0021458&REV_02\3&13C0B0C5&0&FA: Intel(R) ICH8 4 port Serial ATA Storage Controller - 2820
PCI\VEN_8086&DEV_2825&SUBSYS_B0021458&REV_02\3&13C0B0C5&0&FD: Intel(R) ICH8 2 port Serial ATA Storage Controller - 2825
PCI\VEN_8086&DEV_2830&SUBSYS_50041458&REV_02\3&13C0B0C5&0&E8: Intel(R) ICH8 Family USB Universal Host Controller - 2830
PCI\VEN_8086&DEV_2831&SUBSYS_50041458&REV_02\3&13C0B0C5&0&E9: Intel(R) ICH8 Family USB Universal Host Controller - 2831
PCI\VEN_8086&DEV_2832&SUBSYS_50041458&REV_02\3&13C0B0C5&0&EA: Intel(R) ICH8 Family USB Universal Host Controller - 2832
PCI\VEN_8086&DEV_2834&SUBSYS_50041458&REV_02\3&13C0B0C5&0&D0: Intel(R) ICH8 Family USB Universal Host Controller - 2834
PCI\VEN_8086&DEV_2835&SUBSYS_50041458&REV_02\3&13C0B0C5&0&D1: Intel(R) ICH8 Family USB Universal Host Controller - 2835
PCI\VEN_8086&DEV_2836&SUBSYS_50061458&REV_02\3&13C0B0C5&0&EF: Intel(R) ICH8 Family USB2 Enhanced Host Controller - 2836
PCI\VEN_8086&DEV_283A&SUBSYS_50061458&REV_02\3&13C0B0C5&0&D7: Intel(R) ICH8 Family USB2 Enhanced Host Controller - 283A
PCI\VEN_8086&DEV_283E&SUBSYS_50011458&REV_02\3&13C0B0C5&0&FB: Intel(R) ICH8 Family SMBus Controller - 283E
PCI\VEN_8086&DEV_283F&SUBSYS_00000000&REV_02\3&13C0B0C5&0&E0: Intel(R) ICH8 Family PCI Express Root Port 1 - 283F
PCI\VEN_8086&DEV_2845&SUBSYS_00000000&REV_02\3&13C0B0C5&0&E3: Intel(R) ICH8 Family PCI Express Root Port 4 - 2845
PCI\VEN_8086&DEV_2847&SUBSYS_00000000&REV_02\3&13C0B0C5&0&E4: Intel(R) ICH8 Family PCI Express Root Port 5 - 2847
PCI\VEN_8086&DEV_29A0&SUBSYS_00000000&REV_02\3&13C0B0C5&0&00: Intel(R) P965/G965 Processor to I/O Controller PCI\VEN_8086&DEV_29A1&SUBSYS_00000000&REV_02\3&13C0B0C5&0&08: Intel(R) P965/G965 PCI Express Root Port 24 matching device(s) found.
 
 
=========== 
USB devices 
=========== 
 
USB\ROOT_HUB\4&1A8C7E64&0                                   : USB Root Hub
USB\ROOT_HUB\4&2B6A1C74&0                                   : USB Root Hub
USB\ROOT_HUB\4&3726F7FA&0                                   : USB Root Hub
USB\ROOT_HUB\4&51D35F1&0                                    : USB Root Hub
USB\ROOT_HUB\4&53E9AE0&0                                    : USB Root Hub
USB\ROOT_HUB20\4&18C956F9&1                                 : USB Root Hub
USB\ROOT_HUB20\4&1A81320&1                                  : USB Root Hub
USB\VID_046D&PID_C01D\5&39B00FED&0&2                        : USB Human Interface Device
USB\VID_04B8&PID_081E\L10P10509191901060                    : USB Composite Device
USB\VID_04B8&PID_081E&MI_00\6&26995CF3&0&0000               : USB Mass Storage Device
USB\VID_04B8&PID_081E&MI_01\6&26995CF3&0&0001               : USB Printing Support
USB\VID_051D&PID_0002\QB0535136631__                        : American Power Conversion USB UPS
USBPRINT\EPSONSTYLUS_PHOTO_R340\7&38E3DF37&0&USB001         : EPSONStylus Photo R340
USBSTOR\DISK&VEN_EPSON&PROD_STYLUS_STORAGE&REV_1.00\7&2C0F4EF9&0&L10P10509191901060&0: EPSON Stylus Storage USB Device
14 matching device(s) found.

***********dsp_base.ini********************

[General]
; preferred language
prefLang	= "English"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons	= "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI		= "yes"


[Settings]
; disc/bartpe/multibootDisc
instPlatform	= "disc"
; trailing backslash is allowed, but not necessary
location	= "M:\xp\xp with just drivers"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks	= "select"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod	= "2"
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod	= "GUIRunOnce"


; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD		= "none"
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC		= "yes"


; you should only add this section if you've set [Settings]\DriverPacks to "select"
[SelectDriverPacks]
DP_Chipset	= "yes"
DP_Graphics_A	= "no"
DP_Graphics_B	= "yes"
DP_Graphics_C	= "yes"
DP_LAN		= "yes"
DP_MassStorage	= "yes"
DP_Sound_A	= "yes"
DP_Sound_B	= "yes"
DP_WLAN		= "yes"
DP_MassStorage_textmode = "yes"


; this section is optional!
[OptionalSettingsOther]
; CCC/CCP, use ATI Catalyst Control Center or ATI Catalyst Control Panel (only relevant when slipstreaming DriverPack Graphics A)
ATI_cpl		= "CCC"

Last edited by tastyratz (2006-12-22 13:19:04)

  • Registered: 2006-12-22
  • Posts: 4

Re: [SOLVED] Intel DP965LT Mobo & onboard Marvell IDE Controller

also,
fwiw. This is the contents of the latest txtsetup.oem file that comes with the jmicron drivers:

; ****************************************************************************
; ****************************************************************************
; **    Filename:  TxtSetup.OEM
; ****************************************************************************
; ****************************************************************************

[Disks]
disk1 = "JMB36X", jraid_f.inf, \

[Defaults]
scsi = JMicron_RAID_363

;----------- Component Section -----------

[scsi]
JMicron_RAID_363  =  "JMicron JMB363 RAID Controller (Windows 2K/XP/2003)"
JMicron_AHCI_363  =  "JMicron JMB363 AHCI Controller (Windows 2K/XP/2003)"
JMicron_RAID_360  =  "JMicron JMB360 RAID Controller (Windows 2K/XP/2003)"
JMicron_AHCI_360  =  "JMicron JMB360 AHCI Controller (Windows 2K/XP/2003)"
JMicron_RAID_366  =  "JMicron JMB366 RAID Controller (Windows 2K/XP/2003)"
JMicron_AHCI_366  =  "JMicron JMB366 AHCI Controller (Windows 2K/XP/2003)"
JMicron_RAID_361  =  "JMicron JMB361 RAID Controller (Windows 2K/XP/2003)"
JMicron_AHCI_361  =  "JMicron JMB361 AHCI Controller (Windows 2K/XP/2003)"

;-------------------------------------------

[Files.scsi.JMicron_RAID_360]
driver  = disk1, jraid.sys, Jraid
driver  = disk1, Jgogo.sys, Jgogo
inf     = disk1, jraid_f.inf
catalog = disk1, jraid.cat

[Files.scsi.JMicron_RAID_361]
driver  = disk1, jraid.sys, Jraid
driver  = disk1, Jgogo.sys, Jgogo
inf     = disk1, jraid_f.inf
catalog = disk1, jraid.cat

[Files.scsi.JMicron_RAID_363]
driver  = disk1, jraid.sys, Jraid
driver  = disk1, Jgogo.sys, Jgogo
inf     = disk1, jraid_f.inf
catalog = disk1, jraid.cat

[Files.scsi.JMicron_RAID_366]
driver  = disk1, jraid.sys, Jraid
driver  = disk1, Jgogo.sys, Jgogo
inf     = disk1, jraid_f.inf
catalog = disk1, jraid.cat

[Files.scsi.JMicron_AHCI_360]
driver  = disk1, jraid.sys, Jraid
driver  = disk1, Jgogo.sys, Jgogo
inf     = disk1, jraid_f.inf
catalog = disk1, jraid.cat

[Files.scsi.JMicron_AHCI_361]
driver  = disk1, jraid.sys, Jraid
driver  = disk1, Jgogo.sys, Jgogo
inf     = disk1, jraid_f.inf
catalog = disk1, jraid.cat

[Files.scsi.JMicron_AHCI_363]
driver  = disk1, jraid.sys, Jraid
driver  = disk1, Jgogo.sys, Jgogo
inf     = disk1, jraid_f.inf
catalog = disk1, jraid.cat

[Files.scsi.JMicron_AHCI_366]
driver  = disk1, jraid.sys, Jraid
driver  = disk1, Jgogo.sys, Jgogo
inf     = disk1, jraid_f.inf
catalog = disk1, jraid.cat

;-------------------------------------------

[Config.Jraid]
value = parameters\PnpInterface,5,REG_DWORD,1

;--------------------------------------------

[HardwareIds.scsi.JMicron_RAID_360]
id = "PCI\VEN_197B&DEV_2360&CC_0104", "Jraid"
[HardwareIds.scsi.JMicron_RAID_361]
id = "PCI\VEN_197B&DEV_2361&CC_0104", "Jraid"
[HardwareIds.scsi.JMicron_RAID_363]
id = "PCI\VEN_197B&DEV_2363&CC_0104", "Jraid"
[HardwareIds.scsi.JMicron_RAID_366]
id = "PCI\VEN_197B&DEV_2366&CC_0104", "Jraid"

[HardwareIds.scsi.JMicron_AHCI_360]
id = "PCI\VEN_197B&DEV_2360&CC_0106", "Jraid"
[HardwareIds.scsi.JMicron_AHCI_361]
id = "PCI\VEN_197B&DEV_2361&CC_0106", "Jraid"
[HardwareIds.scsi.JMicron_AHCI_363]
id = "PCI\VEN_197B&DEV_2363&CC_0106", "Jraid"
[HardwareIds.scsi.JMicron_AHCI_366]
id = "PCI\VEN_197B&DEV_2366&CC_0106", "Jraid"

Could that be conflicting with the entries in the txtsetup.sif file after running driver pack containing this?

PCI\VEN_197B&DEV_2360="jraid"
PCI\VEN_197B&DEV_2361="jraid"
PCI\VEN_197B&DEV_2363="jraid"
PCI\VEN_197B&DEV_2365="jraid"
PCI\VEN_197B&DEV_2366="jraid"

Last edited by tastyratz (2006-12-23 08:55:34)

  • From: Russia
  • Registered: 2006-06-14
  • Posts: 326

Re: [SOLVED] Intel DP965LT Mobo & onboard Marvell IDE Controller

To All
Problem solved - add to txtsetup.sif next strings:

PCI\VEN_11AB&DEV_6101&CC_0101 = "pciide"
PCI\VEN_11AB&DEV_6111&CC_0101 = "pciide"
PCI\VEN_11AB&DEV_6120&CC_0101 = "pciide"
PCI\VEN_11AB&DEV_6121&CC_0101 = "pciide"
PCI\VEN_11AB&DEV_6140&CC_0101 = "pciide"
PCI\VEN_11AB&DEV_6141&CC_0101 = "pciide"

Verified on Intel DG965RY Mobo. It works! Thanks to iSmart for response!

tastyratz, try to add in txtsetup.sif next strings:

PCI\VEN_197B&DEV_2360&CC_0101="pciide"
PCI\VEN_197B&DEV_2361&CC_0101="pciide"
PCI\VEN_197B&DEV_2363&CC_0101="pciide"
PCI\VEN_197B&DEV_2365&CC_0101="pciide"
PCI\VEN_197B&DEV_2366&CC_0101="pciide"
  • From: Hasselt, Belgium
  • Registered: 2006-05-26
  • Posts: 2,609

Re: [SOLVED] Intel DP965LT Mobo & onboard Marvell IDE Controller

@Debugger: can't we live WITHOUT this hack? I think if you just add the CC_0104 and CC_0106 suffixes, that would work as well.

Founder of DriverPacks.net — wimleers.com

Wim Leers's Website

  • From: Russia
  • Registered: 2006-06-14
  • Posts: 326

Re: [SOLVED] Intel DP965LT Mobo & onboard Marvell IDE Controller

Bâshrat the Sneaky, do you mean to add that suffixes in inf file? If so, I agreed what it will works too. Digital sign absent in driver, so changing of inf file not so bad.

  • From: Hasselt, Belgium
  • Registered: 2006-05-26
  • Posts: 2,609

Re: [SOLVED] Intel DP965LT Mobo & onboard Marvell IDE Controller

Debugger wrote:

Bâshrat the Sneaky, do you mean to add that suffixes in inf file? If so, I agreed what it will works too. Digital sign absent in driver, so changing of inf file not so bad.

I've already applied this in the first 7.01 nightly of DP MassStorage that I uploaded, forgot to put it in the changelog I see now. Will fix that.


Topic closed.

Founder of DriverPacks.net — wimleers.com

Wim Leers's Website