• Registered: 2007-08-21
  • Posts: 102

Topic: [Beta} Chipset x64

http://www.mediafire.com/?ix0ld7yr7yl0z8h

Changelog:
12.07 Beta Feb 2013
- Updated: -WIN7 (Only) Intel\1 Intel(R) USB 3.0 Host Controller Switch Driver DriverVer = 12/04/2012,1.0.7.248
- Updated: -WIN7 (Only) Intel\2 Intel(R) USB 3.0 eXtensible Host Controller & Root Hub (Win7) DriverVer = 12/04/2012,1.0.7.248
- Updated: -WIN7 (Only) Fresco\1 Fresco Logic xHCI (USB3) Controller DriverVer=11/02/2012,3.5.93.0
- Updated: -WIN7 (Only) Fresco\2 Fresco Logic USB 3.0 Extensible Host Controller & Root Hub DriverVer = 11/02/2012,3.5.93.0
- Updated: -VISTA (Only) Fresco\1 Fresco Logic USB 3.0 Extensible Host Controller & Root Hub DriverVer = 11/02/2012,3.5.93.0
- Updated: -All\USB\ASmedia\1 USB3/XHCI Host Controller Driver (All) DriverVer=08/20/2012,1.16.2.0
- Updated: -All\USB\Etron\1 USB 3.0 Extensible Host Controller (All) DriverVer = 07/20/2012,1.00.0000.0115
- Updated: -All\USB\FTDI\1 USB2-to-serial DriverVer=04/10/2012,2.08.24 DriverVer=01/02/2013,6.1.7600.2108
- Updated: -All\USB\Prolific\1 Prolific USB-to-Serial Comm Port DriverVer=07/26/2012,3.4.36.247
- Updated: -All\USB\Renesas\1 Renesas Electronics USB 3.0 Root Hub DriverVer=08/21/2012,3.0.23.0
- Updated: -All\USB\Renesas\2 Renesas Electronics USB 3.0 Root Hub DriverVer=08/21/2012,2.1.39.0
- Updated: -All\USB\SIlabs\1 Silicon Labs CP210x USB to UART Bridge DriverVer=12/10/2012,6.6.1.0
- Updated: -All\USB\TI\1 Texas Instruments XHCI Host Controller & Root Hub DriverVer=11/26/2012, 1.16.2.0
- Updated: -All\USB\Via\1 VIA USB 3.0 eXtensible Host Controller & Root Hub 
- Updated: -All\AMD\1 Filter AMD IOMMU Device DriverVer=08/12/2011, 1.0.3.0020
- Updated: -All\AMD\1 hseries AMD USB 3.0 Filter Driver DriverVer = 08/16/2012,1.1.0.0128
- Updated: -All\AMD\1 SB8xx AMD USB Filter Driver DriverVer = 08/28/2012,2.0.10.273
- Updated: -All\AMD\1 SMBus AMD SMBus Driver DriverVer=03/16/2011, 5.12.0.0015
- Updated: -All\AMD\1 SMBus_svr AMD SMBus (server OS) Driver DriverVer=03/16/2011, 5.12.0.0015
- Updated: -All\MEI\1 Intel Management Engine Interface DriverVer=07/02/2012,8.1.0.1263
  • Registered: 2007-08-21
  • Posts: 102

Re: [Beta} Chipset x64

Dism Win7: Succeeded, no errors
Dism Win8: Succeeded, no errors

  • Registered: 2007-08-21
  • Posts: 102

Re: [Beta} Chipset x64

http://www.mediafire.com/?b2lzmea9l0pvht3

Cleaned up Pack
Drivers are dism compatible.

  • compstuff
  • DriverPacks Wizard & Testing Team Dude
  • Offline
  • From: Florida
  • Registered: 2008-10-06
  • Posts: 429

Re: [Beta} Chipset x64

Is this the latest BETA Chipset Pack? I am wondering where to start working on updates to the pack. I am also wondering how many people have used or tested this pack and if anyone has any feedback.

bigfoot wrote:

http://www.mediafire.com/?b2lzmea9l0pvht3

Cleaned up Pack
Drivers are dism compatible.

  • Registered: 2007-08-21
  • Posts: 102

Re: [Beta} Chipset x64

This is the latest that I have released. I think I did one set after this but never released it.
150 downloads, no feedback.

Last edited by bigfoot (2013-11-06 11:10:49)

  • compstuff
  • DriverPacks Wizard & Testing Team Dude
  • Offline
  • From: Florida
  • Registered: 2008-10-06
  • Posts: 429

Re: [Beta} Chipset x64

@Bigfoot

After all your work I'm sorry to hear that... I am trying to get up to date and I am going to put some tests together for a Latitude 5520 and 5530 tomorrow... not sure if I will use this for them

I am also making an image for some Vostro laptops and this may work perfectly... I will test this as is but I will provide some feedback

Last edited by compstuff (2013-11-06 11:52:01)

  • Registered: 2007-08-21
  • Posts: 102

Re: [Beta} Chipset x64

The packs work fine with dism. I have personally tested them and they integrate fine. I have tried it on a few dells, but not the ones you mention. I no longer have daily access to PC's to test on.
I do have a WDS deployment due in two months so I will need to get an updated x64 pack ready for that deployment.
Any external feedback would be appreciated.

  • OverFlow
  • DriverPacks Administrator & BASE Developer
  • Offline
  • From: Cincinnati
  • Registered: 2006-12-02
  • Posts: 6,730

Re: [Beta} Chipset x64

bigfoot wrote:

This is the latest that I have released. I think I did one set after this but never released it.
150 downloads, no feedback.

Welcome to my world, it feels worse when it's thousands of DL's.
I have come to realize that no feedback = working perfect.
People will definitely show up to bitch if it's broke big_smile.

Sounds like you nailed it Bigfoot

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

OverFlow's Website

  • Floppy
  • DriverPacks Donor!
  • Offline
  • Registered: 2006-05-28
  • Posts: 73

Re: [Beta} Chipset x64

I do not know  this, so I have to ask.
Do I add  C_x64.7z to I:\Win_7\SAD2\NT6\x64 ?
Or do I have to alter the name to DP_Chipset_wnt6-x64_1212.7z ?

  • From: Cambridgeshire, UK
  • Registered: 2007-01-27
  • Posts: 6,226

Re: [Beta} Chipset x64

You have to rename the file.  bigfoot didn't name the files in the standard format.  SAD will only use DriverPacks which are named "DP_***.7z"

Read BEFORE you post.  HWID tool   DriverPacks Tutorial   DONATE!
http://driverpacks.net/userbar/admin-1.png
Not all heroes wear capes, some wear Kevlar!
  • Floppy
  • DriverPacks Donor!
  • Offline
  • Registered: 2006-05-28
  • Posts: 73

Re: [Beta} Chipset x64

Thank you!

  • Registered: 2009-01-29
  • Posts: 24

Re: [Beta} Chipset x64

Thank you for this update, the Intel USB 3.0 driver was especially useful to me.

Since you published this pack, Intel has released new USB 3.0 drivers for the 8 series chipset (DEV_8C31), version 3.x, which isn't backwards compatible with the 7 series hardware. So I've tried simply adding the new driver in Win7/USB/Intel/3, and now, while my machines with the 8 series chipset work fine including USB 3.0, the 7 series systems don't boot *at all* anymore (status 0xc000000f) after integration with pnputil -a / sysprep.

What do you think would be needed to successfully integrate this new USB 3.0 driver?