Stand Alone Driverpack utility for all OS (XP, 2k3, 2k8, Vista, Win7) (Page 11 of 22)

Yes with some dirvers after restart it will ask again to restart this is normal for some drivers even on my Dell lappy does that with one driver.

They have the same hardware ids and that is why three are showing with your config.  That is why we left the touchpad hid drivers behind on the root of the drive if this happens.  Just uninstall them all and reboot then use device manager to install the correct one.  This is a fault of Microsofts tools that are used and not the scripts fault.  Hope this helps understanding it.

You know mr_smartepants it might be best to leave out the drivers for touchpad from the driver pool or you will get alot of complaints from the ones with same hdwr ids or maybe those with same ids can be skipped within the script.  So they have to install one or two drivers manually.....thats not bad in my book.  lol

Last edited by SteveDun (2013-04-27 05:40:34)

Here's version 120426.
http://www.mediafire.com/?550gwfwys51q576

Read BEFORE you post.  HWID tool   DriverPacks Tutorial   DONATE!

Not all heroes wear capes, some wear Kevlar!

Please post your DP_Install_Tool log so I can see which ones are being tagged.

Read BEFORE you post.  HWID tool   DriverPacks Tutorial   DONATE!

Not all heroes wear capes, some wear Kevlar!

he's already my hero, has been for many years.

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!

The DriverPacks, the DP_Base program, and Support Forum are FREE!.

Sounds like a good approach.  I like it.  Cant wait to test if that is what you are using in the script.

Sorry I have been busy with my powerpoint presentation that is due Monday so I havent had much time for testing today anyways.  Maybe tomorrow after my presentation I will have time for testing this again.  School first. 

Last edited by SteveDun (2013-04-29 05:50:10)

still a lil glich in the deleting of unneeded drivers for other os's....I choose "n" for the cleanup of other os's which it should keep them and it did not.  here is a pic.

http://s14.postimg.org/zfec6jcxt/deleting_all_drivers_when_I_said_n_to_the_questi.png

Also still installing two wrong drivers in programs installed under control panel but now doesnt install the touchpad at all.....is the the way you set it up?  before the synaptecs installed and it was correct.  As seen in the pic synaptecs was isntalled also but when check device manager even after reboot it shows just standard driver that micro installs from installation of the os.

http://s17.postimg.org/mmh32kbwv/alps_and_dell_isnt_installling_but_cypress_and_e.png

Also in script where it says this window will close in 10 secs.......this should only show if %SILENT%=Y I think....just a suggestion.

win 7 hm prem but in vmware not on my real lappy just to let you know.  Using SAD3 version 120428 from your above post.

Last edited by SteveDun (2013-04-29 08:55:02)

Well that is very strange since I didn't touch anything from Synaptics.  Your system must have been installing the driver from one folder but using a synaptics app.
Can you go back to a previous install where the touchpad was working fine and go to the device manager "driver" tab, click the "driver details" button and take a screenshot of the .sys info?

Read BEFORE you post.  HWID tool   DriverPacks Tutorial   DONATE!

Not all heroes wear capes, some wear Kevlar!

Here is the code in my working copy.  The REM'd lines are active in the version you are using.  You can see that Synaptics isn't touched.

:: Remove known problem Touchpad HID drivers from driver pool
REM IF /I EXIST "%SYSTEMDRIVE%\D\3\H\A6\" RD /S /Q "%SYSTEMDRIVE%\D\3\H\A6\" >nul
REM IF /I EXIST "%SYSTEMDRIVE%\D\3\H\E\ETD1.inf" DEL /F /S /Q "%SYSTEMDRIVE%\D\3\H\E\ETD1.inf" >nul
REM FOR %%i IN (Elantech\2\ Elantech\3\ Alps\2\ Alps\3\ Alps\4\ Alps\5\) DO (IF /I EXIST "%SystemDrive%\D\%ARCHP%\All\3\Touchpad_Mouse\%%i" RD /S /Q "%SystemDrive%\D\%ARCHP%\All\3\Touchpad_Mouse\%%i" >nul)
REM :: debug
FOR %%i IN ("%SystemDrive%\D\Known-problems*.txt") DO (FOR /F "eol=; tokens=* delims=" %%D IN (%%i) DO (IF /I EXIST "%SYSTEMDRIVE%\D\%%D" RENAME "%SYSTEMDRIVE%\D\%%D" "%%~nxD.bak"))

Now, a single line takes care of disabling the .inf problem kids.

I'll add the Cypress and the older Elantech to the list.
Can you also post your full HWID list?

Read BEFORE you post.  HWID tool   DriverPacks Tutorial   DONATE!

Not all heroes wear capes, some wear Kevlar!

No reason.  It's safe to rename.
I renamed it .bat in testing and forgot to name it back.

Read BEFORE you post.  HWID tool   DriverPacks Tutorial   DONATE!

Not all heroes wear capes, some wear Kevlar!

Sorry to hear about your RAID-1 array.

Here are the files you wanted with pics showing still having a issue with touchpad installs.

http://www1.datafilehost.com/d/2067e817

This was on fresh install of win 7 hm prem x86 in vmware.

I still cant figure out how to correct the keep other OS drivers in clean phase of script.....no matter what, it is broken.  Even if I set clean=n it still removes them.  Plus I think some of the silent=y then do something isnt working either.  Something change with the script being rewritten.  Think it is bed time for me now.  Good nite.

Last edited by SteveDun (2013-04-30 13:45:23)

@Ken@fri,
I thought that would be a give in but some dont know scripting at all so added detailed info on the setupcomplete and firstlogin cmds in the readme.txt file for those that dont quite understand scripting and to edit line accordingly.  Obviously if you choose the /s switch to KTD=Y then that second line should not be added.

Last edited by SteveDun (2013-05-01 01:28:26)