[Nightlies] DP_MassStorage_wnt5_x86-32_1304-1412 - Public (Page 1 of 12)

for DriverPacks folder:
·DP_MassStorage_wnt5_x86-32_1412115.7z - 10.5 MB   E5A37351D713E42A7520D13494E8C8E9835B2EC9

for 3rd party DriverPacks folder:
·DP_MassStorage-Utils_wnt5_x86-32_1411021.7z - 573.02 KB   E04A6E90E2A7315D583069ECBA119FAC1DD47BBC

The MS pack should extend AHCI coverage for the following:

*PNP0600.DeviceDesc                         = "Intel AHCI Controller"
PCI\VEN_8086&DEV_2681&CC_0106.DeviceDesc    = "Intel(R) 631xESB/632xESB SATA AHCI Controller - 2681"
PCI\VEN_8086&DEV_2821&CC_0106.DeviceDesc    = "Intel(R) 82801HR/HO/HH (ICH8R/DO/DH) 6 port SATA AHCI Controller - 2821"
PCI\VEN_8086&DEV_2824&CC_0106.DeviceDesc    = "Intel(R) 82801HB (ICH8) 4 port SATA AHCI Controller - 2824"
PCI\VEN_8086&DEV_2829&CC_0106.DeviceDesc    = "Intel(R) 82801HM/HEM (ICH8M/ICH8M-E) Mobile SATA AHCI Controller - 2829"
PCI\VEN_8086&DEV_2922&CC_0106.DeviceDesc    = "Intel(R) 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA AHCI Controller - 2922"
PCI\VEN_8086&DEV_2923&CC_0106.DeviceDesc    = "Intel(R) 82801IB (ICH9) Mobile 4 Port SATA AHCI Controller - 2923"
PCI\VEN_8086&DEV_3A03&CC_0106.DeviceDesc    = "Intel(R) ICH10 Mobile 4 port SATA AHCI Controller - 3A03"
PCI\VEN_8086&DEV_3A23&CC_0106.DeviceDesc    = "Intel(R) ICH10 Mobile 4 port SATA AHCI Controller - 3A23"
PCI\VEN_8086&DEV_3B23&CC_0106.DeviceDesc    = "Intel(R) 5 Series/3400 Series Mobile 4 port SATA AHCI Controller - 3B23"
; added (Jan 15,2014) for testing thanks to Fernando
PCI\VEN_8086&DEV_0816&CC_0106.DeviceDesc    = "Intel(R) SM35 Express Chipset SATA AHCI Controller - 0816"
PCI\VEN_8086&DEV_1F22&CC_0106.DeviceDesc    = "Intel(R) C600+/C220+ Series SATA AHCI Controller - 1F22" ; avotachi (below)
PCI\VEN_8086&DEV_2323&CC_0106.DeviceDesc    = "Intel(R) DH89xxCC Series Mobile 4 port SATA AHCI Controller - 2323"
PCI\VEN_8086&DEV_8C02&CC_0106.DeviceDesc    = "Intel(R) 8 Series/C220 Chipset Family 6-port SATA AHCI Controller - 8C02"
PCI\VEN_8086&DEV_8C03&CC_0106.DeviceDesc    = "Intel(R) 8 Series/C220 Chipset Mobile 6-port SATA AHCI Controller - 8C03"
PCI\VEN_8086&DEV_8D02&CC_0106.DeviceDesc    = "Intel(R) C610/X99 Series chipset 6-Port SATA AHCI Controller - 8D02"
PCI\VEN_8086&DEV_9C02&CC_0106.DeviceDesc    = "Intel(R) 8 Series/C220 Chipset Family SATA AHCI Controller - 9C02"
PCI\VEN_8086&DEV_9C03&CC_0106.DeviceDesc    = "Intel(R) 8 Series Chipset Mobile SATA AHCI Controller - 9C03"
; added (Mar 29,2014) for testing
PCI\VEN_8086&DEV_8C82&CC_0106.DeviceDesc    = "Intel(R) 9 Series SATA AHCI Controller - 8C82"
PCI\VEN_8086&DEV_8C83&CC_0106.DeviceDesc    = "Intel(R) 9 Series Mobile SATA AHCI Controller - 8C83"
; added (Nov 19,2014) for testing Based on Vista AHCI .Inf files (intel chipset v9.4.4.1006)
;   avotahci.inf
PCI\VEN_8086&DEV_1F23&CC_0106.DeviceDesc    = "Intel(R) Atom(TM) processor C2000 product Mobile AHCI SATA 2 Controller - 1F23"
PCI\VEN_8086&DEV_1F32&CC_0106.DeviceDesc    = "Intel(R) Atom(TM) processor C2000 product family AHCI SATA 3 Controller - 1F32"
PCI\VEN_8086&DEV_1F33&CC_0106.DeviceDesc    = "Intel(R) Atom(TM) processor C2000 product Mobile AHCI SATA 3 Controller - 1F33"
;   Tcrkahci.inf (alt for driver in LS\), VLV2AHCI.inf, Wellahci.inf
PCI\VEN_8086&DEV_880B&CC_0106.DeviceDesc    = "Intel(R) Platform Controller Hub EG20T Mobile SATA AHCI Controller - 880B"
PCI\VEN_8086&DEV_0F23&CC_0106.DeviceDesc    = "Intel(R) Pentium(R)/Celeron(R) processor N/J-series Mobile AHCI Controller - 0F23"
PCI\VEN_8086&DEV_8D62&CC_0106.DeviceDesc    = "Intel(R) C610/X99 Series chipset sSATA AHCI Controller - 8D62"
;   PCI ID Project pci.ids (2014.12.10) from http://pci-ids.ucw.cz/
PCI\VEN_8086&DEV_0F22&CC_0106.DeviceDesc    = "Intel(R) Pentium(R)/Celeron(R) processor N/J-series AHCI Controller - 0F22"
PCI\VEN_8086&DEV_23A3&CC_0106.DeviceDesc    = "Intel(R) Coleto Creek Mobile 4-Port SATA AHCI Controller - 23A3"
PCI\VEN_8086&DEV_9C83&CC_0106.DeviceDesc    = "Intel(R) Wildcat Point-LP Mobile SATA AHCI Controller - 9C83"
PCI\VEN_8086&DEV_A103&CC_0106.DeviceDesc    = "Intel(R) Sunrise Point-H SATA AHCI Controller - A103"
;   From iaAHCI.inf to ensure BartPE/UBCD4Win multiple concurrant driver revision support
PCI\VEN_8086&DEV_27C1&CC_0106.DeviceDesc    = "Intel(R) ICH7R/DH SATA AHCI Controller"
PCI\VEN_8086&DEV_27C5&CC_0106.DeviceDesc    = "Intel(R) ICH7M/MDH SATA AHCI Controller"
PCI\VEN_8086&DEV_2929&CC_0106.DeviceDesc    = "Intel(R) ICH9M-E/M SATA AHCI Controller"
PCI\VEN_8086&DEV_3A02&CC_0106.DeviceDesc    = "Intel(R) ICH10D/DO SATA AHCI Controller"
PCI\VEN_8086&DEV_3A22&CC_0106.DeviceDesc    = "Intel(R) ICH10R SATA AHCI Controller"
PCI\VEN_8086&DEV_3B29&CC_0106.DeviceDesc    = "Intel(R) 5 Series 4 Port SATA AHCI Controller"
PCI\VEN_8086&DEV_3B2F&CC_0106.DeviceDesc    = "Intel(R) 5 Series 6 Port SATA AHCI Controller"
PCI\VEN_8086&DEV_3B22&CC_0106.DeviceDesc    = "Intel(R) 5 Series/3400 Series SATA AHCI Controller"
PCI\VEN_8086&DEV_1C02&CC_0106.DeviceDesc    = "Intel(R) Desktop/Workstation/Server Express Chipset SATA AHCI Controller"
PCI\VEN_8086&DEV_1C03&CC_0106.DeviceDesc    = "Intel(R) Mobile Express Chipset SATA AHCI Controller"
PCI\VEN_8086&DEV_1E02&CC_0106.DeviceDesc    = "Intel(R) 7 Series/C216 Chipset Family SATA AHCI Controller"
PCI\VEN_8086&DEV_1E03&CC_0106.DeviceDesc    = "Intel(R) 7 Series Chipset Family SATA AHCI Controller"

Maybe somebody with a "Intel(R) Sunrise Point-H SATA AHCI Controller - A103" is willing to give it a try? 
  I pulled the HWID from the PCI ID Project pci.ids (2014.12.10)  http://pci-ids.ucw.cz/

Also, a new driver (..\I\dps_IDER_pciide.inf) has been improvised to ensure Intel IDE-R connected drives have Write Caching disabled.  Complimentary drivers have been made to utilize IntelIDE for the regular SATA Controllers, where support doesn't exist from Intel.

For PCI\VEN_8086&DEV_880B&CC_0106, it would appear the Lapis Semiconductor driver that was handling that HWID cannot seem to function on XP, as it was released.  iaStor.sys is now used instead for XP.]

(DPMS_Z87.zip) is deprecated since DP_MassStorage_wnt5_x86-32_1405176.7z
Use the above pack(s) instead.

Please tell us what fails to work.
  Keep your dp Finisher log (search all files for dp*.log), if acceptable.

DP_MassStorage_wnt5_x86-32_1308271 - Cumulative Changelog:

  (based on DP_MassStorage_wnt5_x86-32_1209)
- use with DP_Chipset_wnt5-32_1308271 (minimum) if applicable

For any DriverPack-MassStorage NT5-related issue:
- start new Topic @ http://forum.driverpacks.net/viewforum.php?id=12

Known Issues:
- for additional USB-Floppy & USB CD/DVD textmode support
     see USB-Floppy-CD-DVD-textmode.txt  (may not work for all languages)
- The following controllers have no NT5 or 'F6' textmode support (list unverified):
     8086:0816="Intel(R) SM35 Express Chipset SATA AHCI Controller - 0816"
     8086:2323="Intel(R) Communications Chipset 89xx Series 4 port SATA AHCI Controller #1 - 2323"
- Intel USB 3.0 is not supported on NT5, set BIOS to USB 2.0 Legacy mode for NT5
- Intel(R) iSCSI requires Win2k3
- adpu160m.sys, cpqarry2.sys*, dac960nt.sys, sym_hi.sys, symc810.sys & symc8xx.sys errors
     "are not signed" for Win2k and are replaced in Win2k with "correct Microsoft version"
Unconfirmed Issues:
-AD\1\ Adaptec Serial ATA HostRAID may not be working
    (8086:2682:31F6103C, 8086:2822:31F4103C, 8086:2822:3206103C)
-AD\2\ Adaptec Serial ATA 1205SA Host Controller may not be working (1095:3112:02509005)
-I\6\iaStor2.cat is WHQL'ed for NT6.0 - no complete generic version WHQL'ed for NT5 yet found
     replaced iaAHCI.cat & iaStorNull.cat with Security Catalogs for NT5
-I\b\ 8086:8C02,8C03,9C02,9C03="Intel(R) 8 Series SATA AHCI Controllers" W2k3 textmode support ?
-L\9\ & L\9\1\ LSI/Intel ESRT & ESRT-2 may not be working (MegaIDE, MegaINTL or MegaSR)
-LS\ Intel(R) PCH EG20T AHCI SATA may not be working in textmode (8086:880B&CC_010601)

Added:
-A\ ACARD AEC-67162 PCI Ultra3 LVD/SE Controller  {DriverVer=09/17/2007,2.0.30.0}
-A\ & A\1\ AEC-6293 2-CH SATA & 1-CH IDE Adapter (xp,2k3)  {DriverVer=05/25/2009,1.0.1.5}
-I\1\ Intel Matrix 5.7 SATA-AHCI/RAID (w2k)  {DriverVer=02/21/2006,5.7.0.1011}
-I\2\ Intel 82801FR(ICH6R) Matrix 6.0 SATA-AHCI/RAID  {DriverVer=07/06/2006,6.0.1.1002}
-I\5\ ICH8\M\R AHCI & RAID Controller  {DriverVer=11/06/2010,10.1.0.1008}
        - thanks to Fernando for driver version needed
-I\6\ C600 ser. Chipset SATA AHCI-RAID RST 10.5(WXP)  {DriverVer=10/27/2011,10.5.2.1010}
        - thanks to Caleb37 for solution for x79 chipset & driver version needed
-I\b\ (iaAHCIC.inf) Intel 5/6/7/8/C200/216/C600 SATA-AHCI - RST12.8(W2k3_Test)  {DriverVer=08/01/2013,12.8.0.1016}
      (iaStorAC.inf) Intel ICH8 Mobile/Express SATA/RAID - RST12.8(W2k3_Test)  {DriverVer=08/01/2013,12.8.0.1016}
-L\1\ LSI WarpDrive Solid State Storage (LSI_SSS.INF) {DriverVer=03/07/2011,2.10.43.00}
-L\9\1\ LSI Embedded MegaRAID  {DriverVer=09/27/2012,15.00.0927.2012}
-LS\ Intel(R) PCH EG20T AHCI SATA Controller  {DriverVer=11/26/2012, 2.7.0.0}
        - Archived unsigned Security Catalogs
        - thanks to whl0806 for the request
-M\ Marvell 94xx SAS/SATA RAID Controller  {DriverVer=03/12/2010,4.0.0.2002}
-O\ OCZ 10xx SCSI Controller {DriverVer=04/05/2012,1.3.6.17083}
-S\B\6\ Silicon Image SiI 3132 SATALink for BIOS 7702  {DriverVer=06/24/2009, 1.0.22.4}
-V\ VIA StorX RAID Storage Controller  {DriverVer = 05/20/2011,5.1.7600.1101}
-V\1\ VIA AHCI/RAID Controller (W2K3)  {DriverVer=11/26/2010, 5.1.7600.601}
-VB\ (VIOSTOR.INF) Red Hat VirtIO SCSI controller  {DriverVer=06/19/2013,51.65.104.6500}
-VM\ (pvscsi.inf) VMware PVSCSI Controller  {DriverVer=09/28/2012,1.2.3.0}

Imported from DP_Chipset_wnt5-x86_1304rc2 for USB 3.0 textmode support:
        - thanks to Damnation and cdob
-U3\ AMD USB3 Host Controller/Hub to {DriverVer=02/26/2013,1.1.0.0145}
      ASmedia USB3 controller/hub to {DriverVer=11/08/2012,1.16.4.0}
      Etron USB3 Contr./hub to {DriverVer=07/20/2012,1.00.0000.0115}
        - Renamed & .Inf modified (originals archived) for disabled DOS8.3FN creation
        - thanks to cdob & Damnation for solutions
      (NEC-legacy.7z) legacy NEC uPD720200 series USB3 driver(pre-REV_03) v1.0.20.0
        - Archived due to conflict with NEC-Renesas uPD720200(A) Hub driver
        - thanks to cdob for reporting the issue
      Renesas uPD720200/A USB3 Contr./Hub (xp,2k3) to {DriverVer=08/21/2012,2.1.39.0}
      Renesas uPD720201/2 USB3 Contr./Hub (xp,2k3) to {DriverVer=08/21/2012,3.0.23.0}
      TexasInstruments USB3 Contr./Hub (xp,2k3) to {DriverVer=11/26/2012,1.16.2.0}

Moved (& Updated if applicable):
-A\ to A\1\ ACARD AEC6880/90/91 UATA133/SATA RAID to {DriverVer=05/31/2007,3.0.2.0}
-AD\aarahci.* to AD\1\, &adj.ini to fix potential conflict w.8086:2682 & 2822
-AD\ASH1205.* to AD\2\, &adj.ini to fix conflict w.1095:3512
-ADB\ to AD\B\, AM6\ to AM\6\, AM7\ to AM\7\, AM8\ to AM\8\, C4\ to C\4\
-HK\ to H\K\, HS\ to H\S\
-I\ to I\0\, I2\ to I\3\, I3\ to I\4\, I4\ to I\a\, I5\ to I\, I6\ to I\7\, I7\ to I\9\
-I5\ to I\2k\ many files from Intel Corp. from 9.3.0.1021 (7/24/2012) Chipset package
        - fixes non-WHQL on Win2k with all newer Intel Chipset drivers
-IB3\ to IB\3\, IT2\ to IT\2\, IT3\ to IT\3\
-L\ to L\9\MegaINTL.*  to fix conflict w.8086:24DF:CC_0104, etc.?
        - thanks to Damnation for a solution & candles for reporting the issue
-L\ to L\9\MegaIDE.* renamed to MegaATA.* & mod .Inf to {DriverVer=05/11/2004,4.1.0511.2004}
-L\ to L\9\ LSI Embedded MegaRAID  {DriverVer=08/11/2012,15.00.0811.2012} (2k3-WHQL'ed, XP-non)
        - moved MegaSR.* to fix conflict w.8086:27C3, 2682, & 2822
        - thanks to abramoff for reporting issue w. 8086:27C3
-L\ to L\9\0\MegaSR2k.*
-L0\ to L\0\, L1\ to L\1\, L2\ to L\2\, L7\ to L\7\, L8\ to L\8\, M4\ to M\4\
-N1\ through N8\ to N\1\ through N\8\, Q3\ to Q\3\
-P1K\ to P\1\K\, P1S\ to P\1\S\, P2K\ to P\2\K\, P2S\ to P\2\S\, P6K\ to P\6\K\, P6S\ to P\6\S\
-P\*.* to P\0\, P1\*.* to P\1\, P2\*.* to P\2\, P3\ to P\3\, P6\*.* to P\6\, P7\ to P\7\
-PA\ to P\A\, PB\ to P\B\, PC\ to P\C\, PD\ to P\D\
-S0\ through S9\, SA#\ through SC#\ to S\0\ through S\C\#\
-SS1\ to SS\1\, SS2\ to SS\2\
-V1\ to V\1\, V\ to VM\ (VMSCSI.inf) VMware SCSI Controller
Removed:
-AM7\ & AM8\ ahcix867.sys & ahci868.sys & mirrored changes in MS.ini tags
-D\AFAMGT.sys  an orphaned file  (thanks to Acheron for the report)
-I5\ cougahci, DH89xxCC-ahci, ibexahci, LxLpAHCI, LxPtAHCI, pantahci, patahci, Tcrkahci & wptahci
        - all were msahci-dependent, a nonexistant NT5 mshdc.inf section
-S\1\pnp680r.cat - Archived invalid Security Catalog
-SA2\  obsoleted by SA\ update below (now S\A\)
-SC2\, SC3\, SC4\ & SC5\ (SC\ executables & libraries duplicated in SC5\ - now S\C\5\)
   all SCx\ HWid's previously duplicated in [SC] within "DriverPack_MassStorage_wnt5_x86-32.ini"

Updated:
-A\ & A\1\ AEC6280/90 2-Ch PCI Ultra133/SATA Adapter (xp,2k3) to 03/19/2007,1.1.1.2
        - added AEC6290 HWID's
-A\ ACARD AEC67160 PCI Ultra160 LVD/SE SCSI Adapter to {DriverVer=10/06/2004,2.0.1.0}
-A\ & A\1\ AEC6897/8 4-ChIDE U133/SATA RAID (xp,2k3) to {DriverVer=03/06/2007,1.0.3.9}
-AM\ AMD SATA Controller (IDE Mode) to {DriverVer=12/04/2012,5.2.2.0179}
-AM\8\ AMD AHCI Compatible RAID Controller SB8xx to {DriverVer=12/29/2011,3.3.1540.29}
-AS\ Asmedia 106x SATA Controller to {DriverVer=07/18/2012,1.3.8.000}
-C\ HP Smart Array B110i SATA RAID Controller (W2k3) to {DriverVer=02/13/2012,6.18.0.32}
        - thanks to profp62 for the request
-H\ RocketRAID 271x/272x SAS Controller to {DriverVer=10/23/2012, 1.3.12.1023}
-I\ Updated IDE drivers from v9.4.0.1026 (Aug 8 2013) Chipset package
-I\0\ Intel iSCSI (Windows Server 2003 32-bit) to {DriverVer=11/21/2012,2.2.0.7}
-I\7\ dps6AHCI/dps6Stor.inf replaced by dps7AHCI/dps7Stor in I\8\ (RST 10.8 to 11.2)
        - thanks to Acheron for the request
-I\a\ Intel RST Enterprise C600 Series SATA AHCI-RAID (W2k3) to {DriverVer=10/18/2012,3.6.0.1086}
-J\ Jmicron JMB36X/JMB37X RAID Controller to {DriverVer=09/17/2012,1.17.65.11}
-L\ LSI PCI Fusion-MPT (lsi_sas.inf - w2k3) to {DriverVer=06/13/2011,1.34.03.00}
        - includes OCZ Z Drive (p8x, e84) support for Damnation
    LSI PCI Fusion-MPT SAS2 Controllers (SAS2XP86.INF) to {DriverVer=04/04/2012,2.00.57.00}
-L\0\ LSI PCI Fusion-MPT SAS2 Controllers (lsi_sas2.inf) to {DriverVer=05/30/2012,2.00.58.00}
-L\8\ LSI PCI Fusion-MPT (symmpi.inf - XP) to {DriverVer=06/13/2011,1.34.03.00}
-M\ Marvell 91xx/92xx SATA 6G Controller to {DriverVer=08/28/2012,1.2.0.1028}
-M\4\ Marvell 64xx/63xx SAS Controller to {DriverVer=01/10/2010,3.1.0.2408}
-S\3\ Silicon Image SiI 3531 SATA Controller to {DriverVer=06/04/2009, 1.5.20.1}
-S\4\ Silicon Image SiI-3x12 SATALink Controller {DriverVer=04/22/2009,1.3.71.1}
-S\7\ Silicon Image SiI 3114 SATA Controller to {DriverVer=04/22/2009, 1.3.11.0}
-S\8\ Silicon Image SiI 3124 SATALink Controller to {DriverVer=04/21/2009, 1.3.22.0}
-S\A\ Silicon Image SiI 3124 SoftRaid 5 Controller to  {DriverVer=04/13/2010, 1.5.23.0}
        - includes OCZ RevoDrive support; thanks to Damnation for the link
-S\C\ Silicon Image SiI 3132 SoftRaid 5 Controller to  {DriverVer=09/17/2008, 1.5.19.0}
-V\ VIA StorX Storage Controller (WXP) to  {DriverVer = 11/04/2011,5.1.7600.1301}
-V\1\ VIA StorX Storage Controller (W2K3) to  {DriverVer = 11/04/2011,5.1.7600.1301}
-VM\ (VMSCSI.inf) VMware VMSCSI Controller  {DriverVer=05/14/2012,2.0.3.0}

Previous 5 Years of Changelogs (by various maintainers including OverFlow):

v12.09
Added
- D\ Dell PERC S100 S300 Controller DriverVer = 01/10/2011,2.0.0.0162
- SS1\ SiS 180/181 RAID Controller DriverVer=05/03/2005,5.1.1039.1090 (old driver added by request)
Updated
- I4\ Intel RST Enterprise C600 Series SATA AHCI (2k3) DriverVer=06/20/2012,3.2.0.1126
- I5\ Updated from 9.3.0.1021 (7/24/2012) package
- L\ LSI Embedded MegaRAID DriverVer = 05/28/2012,15.00.0528.2012 (From Intel: http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=20963&lang=eng&OSVersion=%0A&DownloadType=Drivers)
- L\ LSI Logic PCI Fusion-MPT SAS2 Controller DriverVer = 01/17/2012,2.00.55.00 (From Intel: http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=21423&lang=eng&OSVersion=%0A&DownloadType=Drivers)
- M\  Marvell 61xx RAID Controller to DriverVer=05/24/2012,1.2.0.8400
- M\  Marvell 91xx RAID Controller to DriverVer=06/06/2012,1.2.0.1027
- V\ VMware SCSI Controller DriverVer=10/23/2008,1.2.1.0


v12.06
Added
- L\ LSI Logic MegaRAID SAS 8xxx/9xxx RAID Controller DriverVer = 01/11/2012,5.2.112.32 (shuffled HWIDs in .ini [L]).
Updated
- AM\ AMD SATA Controller (Win2k3) (amd_sata.inf) DriverVer=10/28/2011,1.2.001.0321 (12.4)
- AM7\ AMD AHCI Compatible RAID Controller SB700 DriverVer=07/01/2009, 3.1.1540.151 (12.4)
- AM8\ AMD AHCI Compatible RAID Controller SB800 DriverVer=11/17/2011, 3.3.1540.26 (12.4)
- AS\ Asmedia 106x SATA Controller DriverVer=01/05/2012,1.3.4.000 (WXP & W2K3)
- I4\ Intel RST Enterprise C600 Series SATA AHCI (2k3) DriverVer=03/31/2012,3.1.0.1082 
- I7\ Intel Rapid Storage Technology 11.2 DriverVer=05/30/2012,11.2.0.1006
Changed
- AM\ Removed HWID from amd_sata.inf (original backed up to amd_sata.7z). Removed HWID from .ini [AM] section to force [AM7].
- AM6\ Removed HWID from ahcix86.inf (original backed up to ahcix86.7z). 
Removed all *.pdb files from -L\ LSI drivers to save space.  Not referenced in any .inf or .cat files.


v12.03
Updated
- AM\ AMD SATA Controller (Win2k3) (amd_sata.inf) DriverVer=10/04/2011,1.2.001.0317
- AM8\ AMD SATA Controller SB800 DriverVer=09/22/2011, 3.3.1540.22
- I5\ Updated from 9.3.0.1020 (2/16/2012) package
- I7\ Intel Rapid Storage Technology 11.0 DriverVer=02/01/2012,11.1.0.1006
- M\  Marvell 61xx RAID Controller to DriverVer=05/06/2011,1.2.0.8300
- M\  Marvell 91xx RAID Controller to DriverVer=11/11/2011,1.2.0.1019


v12.01
Added
- C\  Compaq\HP Smart Array SAS/SATA B400/E200/E500/P400/P600/P700/P800 series (XP/W2K) DriverVer=01/26/2010, 5.22.0.32
- I7\ Intel Rapid Storage Technology 11.0 DriverVer=11/29/2011,11.0.0.1032
Updated
- I4\ Intel RST Enterprise C600 Series SATA AHCI (2k3) DriverVer=12/19/2011,3.0.1.7016 
- I5\ Updated from 9.3.0.1019 (11/27/2011) package
Changed
Renamed - I8\ Intel RST Enterprise to - I4\
Renamed - I9\ Intel RST 10.8 to - I6\  Moved some HWIDs to new I7\
Moved HWID PCI\VEN_8086&DEV_2829&CC_0106 from [I6] to [I3] .ini section

   
v11.11
Added
- I8\ Intel RST Enterprise C600 Series SATA AHCI (2k3) DriverVer=08/26/2011,3.0.0.1112
Updated
- AS\ Asmedia 106x SATA Controller DriverVer=09/21/2011,1.3.1.000 (WXP & W2K3)
- I5\ Updated from 9.2.3.1022 (8/27/2011) package
- I9\ Intel Rapid Storage Technology 10.8 DriverVer=10/17/2011,10.8.0.1003 
Removed
- A\ Invalid .cat file removed.  Backed up to AEC68X5.7z
- AD\ Invalid .cat files removed.  Backed up to AAC.7z, ADP3132.7z, DPTI2O.7z
- ADB\ Invalid .cat file removed.  Backed up to AAC.7z
- H\ Invalid .cat files removed.  Backed up to invalid_cat_files.7z
- HK\ Invalid .cat files removed.  Backed up to hptmv.7z, rr26xx.7z, rr2644.7z, rr2680.7z
- HS\ Invalid .cat file removed.  Backed up to hptmv.7z
- IB\ Invalid .cat file removed.  Backed up to ADP94XX.7z
- L\ Invalid .cat files removed.  Backed up to MEGAXP.7z, s2k332.7z
- L0\ Invalid .cat file removed.  Backed up to s2k332.7z
- L7\ Invalid .cat file removed.  Backed up to symmpi2k.7z
- P\ Invalid .cat files removed.  Backed up to FastSX.7z, ULSATA.7z
- P\K\ Invalid .cat files removed.  Backed up to invalid_cat_files.7z
- P\S\ Invalid .cat files removed.  Backed up to invalid_cat_files.7z
- P1\ Invalid .cat file removed.  Backed up to Fasttrak.7z
- P1K\ Invalid .cat file removed.  Backed up to Fasttrak.7z
Fixed
Moved HWIDs to [I9] section of .ini (requested here: http://forum.driverpacks.net/viewtopic.php?pid=45516#p45516) 


v11.09
Changed
- 3b\ merged into 3\ to shorten overall filepath length.
- 3c\ merged into 3\ to shorten overall filepath length.
- A2\ merged into A\ to shorten overall filepath length.
- A3\ merged into A\ to shorten overall filepath length.
- A4\ merged into A\ to shorten overall filepath length.
- A5\ merged into A\ to shorten overall filepath length.
- A6\ merged into A\ to shorten overall filepath length.
- A7\ merged into A\ to shorten overall filepath length.
- A8\ merged into A\ to shorten overall filepath length.
- AD2\ merged into AD\ to shorten overall filepath length.
- AD3\ merged into AD\ to shorten overall filepath length.
- AD4\ merged into AD\ to shorten overall filepath length.
- AD5\ merged into AD\ to shorten overall filepath length.
- AD6\ merged into AD\ to shorten overall filepath length.
- AD7\ merged into AD\ to shorten overall filepath length.
- AD8\ merged into AD\ to shorten overall filepath length.
- AD9\ merged into AD\ to shorten overall filepath length.
- ADA\ merged into AD\ to shorten overall filepath length.
- ADC\ merged into AD\ to shorten overall filepath length.
- ADD\ merged into AD\ to shorten overall filepath length.
- AM1\ merged into AM\ to shorten overall filepath length.
- AM3\ merged into AM\ to shorten overall filepath length.
- AM4\ merged into AM\ to shorten overall filepath length.
- AT\ merged into AM\ to shorten overall filepath length.
- AU2\ merged into AU\ to shorten overall filepath length.
- AU3\ merged into AU\ to shorten overall filepath length.
- C1\ merged into C\ to shorten overall filepath length.
- C2\ merged into C\ to shorten overall filepath length.
- C3\ merged into C\ to shorten overall filepath length.
- C5\ merged into C\ to shorten overall filepath length.
- D1\ merged into D\ to shorten overall filepath length.
- D3\ merged into D\ to shorten overall filepath length.
- H0\ merged into H\ to shorten overall filepath length.
- H1\ merged into H\ to shorten overall filepath length.
- H2\ merged into H\ to shorten overall filepath length.
- H4\ merged into H\ to shorten overall filepath length.
- H5\ merged into H\ to shorten overall filepath length.
- H6\ merged into H\ to shorten overall filepath length.
- H7\ merged into H\ to shorten overall filepath length.
- H8\ merged into H\ to shorten overall filepath length.
- H9\ merged into H\ to shorten overall filepath length.
- H10\ merged into H\ to shorten overall filepath length.
- H11\ merged into H\ to shorten overall filepath length.
- H12\ merged into H\ to shorten overall filepath length.
- H13\ merged into H0\ to shorten overall filepath length.
- H3\ renamed into HK\ to better organize files.
- H4S\ renamed into HS\ to better organize files.
- H\K\ merged into HK\ to shorten overall filepath length.
- H\S\ merged into HS\ to shorten overall filepath length.
- H1S\ merged into HS\ to shorten overall filepath length.
- H3K\ merged into HK to shorten overall filepath length.
- H3S\ merged into HS to shorten overall filepath length.
- H4K\ merged into HK\ to shorten overall filepath length.
- H5S\ merged into HS\ to shorten overall filepath length.
- H6S\ merged into HS\ to shorten overall filepath length.
- H7S\ merged into HS\ to shorten overall filepath length.
- H9S\ merged into HS\ to shorten overall filepath length.
All Highpoint Windows XP-only or combined drivers (2k/XP/2k3) are now in - H\
All Highpoint Windows 2000-only drivers are now in - HK\
All Highpoint Windows 2003-only drivers are now in - HS\
- I6\ merged into I\ to shorten overall filepath length.
- I7\ merged into I\ to shorten overall filepath length.
- IB6\ merged into IB\ to shorten overall filepath length.
- IT1\ merged into IT\ to shorten overall filepath length.
- L0\ merged into L\ to shorten overall filepath length.
- L1\ merged into L\ to shorten overall filepath length.
- L3\ merged into L\ to shorten overall filepath length.
- L4\ merged into L\ to shorten overall filepath length.
- L5\ merged into L\ to shorten overall filepath length.
- L6\ merged into L\ to shorten overall filepath length.
- L8r\ merged into L\ to shorten overall filepath length.
- L9\ merged into L\ to shorten overall filepath length.
- La\ merged into L\ to shorten overall filepath length.
- Lb\ merged into L\ to shorten overall filepath length.
- M2\ merged into M\ to shorten overall filepath length.
- M3\ merged into M\ to shorten overall filepath length.
- M5\ merged into M\ to shorten overall filepath length.
- N4 renamed to N\ to shorten overall filepath length.
- N4I\ merged into N\ to shorten overall filepath length.
- N5\ merged into N\ to shorten overall filepath length.
- N6r renamed to N5\ to shorten overall filepath length.
- N7r renamed to N8\ to shorten overall filepath length.
- Nt\ merged into N\ to shorten overall filepath length.
- P2\K renamed to P2K\ to shorten overall filepath length.
- P4\ merged into P\ to shorten overall filepath length.
- P5\ merged into P\ to shorten overall filepath length.
- P8\ merged into P\ to shorten overall filepath length.
- P9\ merged into P\ to shorten overall filepath length.
- PAS\ renamed to PB\ to shorten overall filepath length.
- Q2\ merged into Q\ to shorten overall filepath length.
- Q4\ merged into Q\ to shorten overall filepath length.
- S2A\ renamed to S1\ to shorten overall filepath length.
- S7A\ renamed to S6\ to shorten overall filepath length.
- S7B\ renamed to S0\ to shorten overall filepath length.
- SS1\ renamed to SS\ to shorten overall filepath length.
- SS3\ merged into SS\ to shorten overall filepath length.
- V2\ merged into V\ to shorten overall filepath length.
- V3\ merged into V\ to shorten overall filepath length.
- V4\ merged into V\ to shorten overall filepath length.
- V4s\ renamed to V1\ to shorten overall filepath length.
- VM\ merged into V\ to shorten overall filepath length.

Added
- H\ Highpoint RocketRAID 271x/272x SAS Controller DriverVer=06/23/2011, 1.1.11.623
- H\ Highpoint RocketRAID 273x/274x SAS Controller DriverVer=05/27/2011, 1.0.11.527
- H\ Highpoint RocketRAID 2760 SAS Controller DriverVer=05/19/2011, 1.0.11.519
- H3\ Highpoint RocketRAID 2644 SAS Controller (w2k) DriverVer=10/12/2010, 1.5.10.1012
- H4\ Highpoint RocketRAID 2644 SAS Controller (wxp) DriverVer=10/12/2010, 1.5.10.1012
- H4S\ Highpoint RocketRAID 2644 SAS Controller (2k3) DriverVer=10/12/2010, 1.5.10.1012
- H3\ Highpoint RocketRAID 2680 SAS Controller (w2k) DriverVer=10/12/2010, 1.5.10.1012
- H4\ Highpoint RocketRAID 2680 SAS Controller (wxp) DriverVer=10/12/2010, 1.5.10.1012
- H4S\ Highpoint RocketRAID 2680 SAS Controller (2k3) DriverVer=10/12/2010, 1.5.10.1012
- HS\ Highpoint RocketRAID 154x/1640 Controller (2K3) DriverVer=07/07/2008, 2.7.8.707
- N2\ NVIDIA nForce 590/570/550 SATA (From Asus M2N-E) DriverVer=08/21/2006,5.10.2600.0687 requested here: http://forum.driverpacks.net/viewtopic.php?pid=45336#p45336

Updated
- AM\ AMD SATA Controller (IDE Mode) (amdhdc.inf) DriverVer=04/29/2010,5.2.1.78 (supports new SB900)
- AM8\ AMD SATA Controller SB800 DriverVer=05/19/2011, 3.3.1540.17
- B\ Broadcom HT1000 SATA Controller (w2k3) DriverVer=09/30/2010,1.1.10273.1 (HP ProLiant DL165)
- D\ Dell PERC 5-6/E-i Adapter RAID Controller to DriverVer=01/19/2009,2.24.0.32 (Dell Poweredge T710)
- D\ Dell CERC SATA 1.5/6ch to DriverVer=05/03/2007,4.1.1.7043 (Dell Poweredge 850)
- I\ Intel iSCSI (from v16.5 network CD) driver DriverVer=07/13/2011,2.1.25.2
- H\ Highpoint RocketRAID 154x/1640 Controller (XP/2K) DriverVer=07/07/2008, 2.7.8.707
- H\ Highpoint RocketRAID 262x/264x SAS Controller (wxp) DriverVer=10/12/2010, 1.5.10.1012
- HK\ Highpoint RocketRAID 262x/264x SAS Controller (w2k) DriverVer=10/12/2010, 1.5.10.1012
- HS\ Highpoint RocketRAID 262x/264x SAS Controller (2k3) DriverVer=10/12/2010, 1.5.10.1012
- L\ LSI Embedded MegaRAID SAS/SATA (XP/2k3) DriverVer=07/27/2011,14.05.0727.2011 (MegaSR.inf)
- L\ LSI PCI Fusion-MPT SAS2 (XP) DriverVer=05/05/2011,2.00.45.01 (lsi_gen2.inf)
- L\ LSI MegaRAID SAS/SATA RAID Controller (w2k/XP) DriverVer=04/26/2011,5.1.102.32 (megasas.inf)
- L\ LSI MegaRAID SAS/SATA RAID Controller (w2k3) DriverVer=04/26/2011,5.1.102.32 (msas2k3.inf)
- L8\ LSI Logic SAS 3000/Dell SAS 5X/6I (XP) DriverVer=12/07/2010,1.34.02.00

Fixed
- V\ .ini mscount was wrong.
Fixed .ini sections to prevent memory errors in Windows 2000 textmode setup.
Fixed .ini sections to prevent file errors in Windows 2003 server textmode setup.

Removed
- IT\XP duplicated with IT1
- IT\2k duplicated with IT2
- IT\2k3 duplicated with IT3


v11.08
Added
- H13\ Highpoint RocketRAID 27xx SATA DriverVer=09/29/2010, 1.0.10.929

Updated
- H12\ Highpoint RocketRAID 64x SATA DriverVer=06/24/2010, 1.1.10.624
- I5\ Updated from 9.2.2.1034 (8/16/2011) package
- M5\  Marvell 91xx AHCI SATA 6G Controller to DriverVer=06/16/2011,1.2.0.1006

Fixed
- H7/H7S .ini entries tag duplication.
- H9/H9S .ini entries tag duplication.
- IT1 (2k & 2k3) .ini entries tag duplication.

Removed
- M6\ Marvell 91xx AHCI SATA 6G Controller (storport) duplicated with newer \M5


v11.07
Fixed
- I2\ Moved HWID VEN_8086&DEV_2829&CC_0106 to [I2] .ini section.
- Nt\  Added HWID PCI\VEN_10DE&DEV_0266&CC_0101,PCI\VEN_10DE&DEV_0267&CC_0101,PCI\VEN_10DE&DEV_03F6&CC_0101 back to .ini for Nvidia Legacy

Added
- AM6\ AMD SATA Controller SB600 (Catalyst 11.6) DriverVer=09/22/2008, 3.100.1540.86
- AM7\ AMD SATA Controller SB700 (Catalyst 11.6) DriverVer=03/17/2009, 3.1.1540.127
- AM8\ AMD SATA Controller SB800 (Lenovo B575) DriverVer=05/10/2011, 3.3.1540.16 (two additional HWIDs)
- C5\  HP Smart Array B110i SATA RAID Controller (W2K3)  DriverVer=05/28/2010, 6.14.0.32
- V4s\  VIA StorX Storage Controller (W2k3) DriverVer = 04/12/2011,7.0.7600.1103

Updated
- AS\ Asmedia 106x SATA Controller DriverVer=05/04/2011,1.2.6.000 (WXP & W2K3)
- I9\ Intel Rapid Storage Technology 10.6 DriverVer=05/20/2011,10.6.0.1002
- L8\ LSI Logic SAS 3000/Dell SAS 5X/6I (XP) DriverVer=01/30/2009,1.30.02.00
- L9\ LSI Logic SAS 3000/Dell SAS 5X/6I (w2k3) DriverVer=01/30/2009,1.30.02.00
- S5\ Silicon Image SiI 3112 SATARaid Controller DriverVer=08/17/2007, 1.0.62.0
- S7\ Silicon Image SiI 3114 SATALink Controller DriverVer=04/10/2008, 1.3.11.0
- S7B\ Silicon Image SiI 3114 SoftRaid 5 Controller DriverVer=11/21/2008, 1.5.20.3
- V\ VIA RAID Controller DriverVer=11/26/2010, 5.1.7600.601
- V4\  VIA StorX Storage Controller (XP) DriverVer = 03/03/2011,5.1.7600.1102

Removed
- AM0\ AMD SATA Controller SB600, SB700, SB800 (Duplicated with AM4)
- AM2\ AMD AHCI Compatible RAID SB7xx (Duplicated with AM7)
- AM9\ AMD SATA AHCI Controller  (Duplicated with AM8)
- I8\ Intel RST 10.1 drivers (HWIDs moved to I9 dps9*.inf, some duplicated with I2/I3)
- SS\ SiS 180/181 RAID Controller (Duplicated with SS1)
- I5\ ICH78ID2.* due to conflict with ICH78IDE.* files (originals stored in M\I5\ich78id2.7z)


v11.06 (final)
Added
- I9\ Intel Rapid Storage Technology 10.5 DriverVer=04/26/2011,10.5.0.1026 
- M6\ Marvell 91xx AHCI SATA 6G Controller (storport) to DriverVer=04/08/2011,1.2.0.1003

Updated
- AS\ Asmedia 106x SATA Controller DriverVer=03/23/2011,1.2.2.000 (WXP & W2K3)
- I5\ Updated from 9.2.0.1030 (4/21/2011) package
- J\  JMicron JMB36X RAID to DriverVer=05/19/2011, 1.17.63.1

Fixed
- I8\ Intel RST 10.1 .ini entries pruned in favor of I9.
- N7\ Fixed .ini to avoid conflict.
- N7r\ Fixed .ini to avoid conflict.

Removed
- I4\ Intel(R) Matrix Storage Manager 9.6 (Replaced by I8 & I9)


v11.04
Fixed
- C\ Missing .ini HWID entries.
- H5\ Restored corrupted .sys file for Highpoint RocketRAID 2220 SATA DriverVer=10/26/2007, 1.9.7.1026 (WXP)
- I3\ Moved HWID (PCI\VEN_8086&DEV_27C3&CC_0104) .ini entry from [I8] to [I3].  Reported here: http://forum.driverpacks.net/viewtopic.php?pid=43609#p43609
- I3\ Moved HWID (PCI\VEN_8086&DEV_2829&CC_0106) .ini entry from [I8] to [I3] to fix BSOD (requested here: http://forum.driverpacks.net/viewtopic.php?id=5159)
- N2\ .ini error for 9.3 filename
- N7r\ Fixed .ini to avoid conflict.

Added
- AS\ Asmedia 106x SATA Controller DriverVer=03/02/2011,1.2.1.000 (WXP & W2K3)
- H5S\ Highpoint RocketRAID 2220 SATA DriverVer=10/26/2007, 1.9.7.1026 (W2K3)
- N2\ [N2] ini section.  NVIDIA nForce 2/3/4 From nForce 6.39 DriverVer=01/20/2005,5.10.2600.0507

Updated
- AM4\ AMD SATA Controller SB700, SB800 (W2K3) to DriverVer=11/11/2010,1.2.001.0275 (AHCI)
- M\  Marvell 61xx RAID Controller to DriverVer=02/09/2011,1.2.0.8000
- M5\  Marvell 91xx AHCI SATA 6G Controller to DriverVer=02/14/2011,1.1.0.6


v11.01
Added
- D4\ DELL PERC H700/H800 RAID Driver (Server 2003 32-bit) DriverVer=08/09/2010,4.31.1.32

Updated
- I8\ Intel RST DriverVer=11/06/2010,10.1.0.1008  (replaces .ini [I4] section)
- J\  JMicron JMB36X RAID from DriverVer=09/07/2010, 1.17.59.0 to 11/25/2010, 1.17.62.0
- M\  Marvell 61xx RAID Controller to DriverVer=10/26/2010,1.2.0.7700
- M5\  Marvell 91xx AHCI SATA 6G Controller to DriverVer=11/22/2010,1.0.00.1051


v10.11
Added
- I8\ Intel RST DriverVer=09/13/2010,10.0.0.1046  (replaces .ini [I4] section)
- IT\ IT8212 ATA/ATAPI controller to existing RAID drivers.
- IT1\ IT8211 ATA/ATAPI controller DriverVer=02/29/2008,1.3.4.2
- L0\ LSI SAS2 2xxx Adapter DriverVer=07/30/2010,2.00.35.00
.ini section for [N7r] requested here: http://forum.driverpacks.net/viewtopic.php?id=4875

Updated
- 3C\ AMCC 3ware 9xxx SATA/SAS RAID Controller from DriverVer = 12/04/2006,3.00.02.090 to 03/24/2009,3.00.04.070
- L4\ LSI Logic MegaRAID SAS 8xxx RAID Controller (XP) from DriverVer=02/14/2008,2.20.0.32 to 08/09/2010,4.31.1.32
- L5\ LSI Logic MegaRAID SAS 8xxx RAID Controller (2k3) from DriverVer=12/03/2007,2.20.0.32 to 08/09/2010,4.31.1.32
- L6\ Intel/LSI MegaRAID SAS/SATA from DriverVer=06/26/2008,11.02.0626.2008 to 06/14/2010,13.21.0614.2010
- M5\  Marvell 91xx AHCI SATA 6G Controller to DriverVer=08/27/2010,1.0.0.1045
Fixed M5\ .ini section to include bus extender


v10.10
Fixed
.ini entries for [M] and [M5] for dual .sys loading.
Removed [T] .ini entry to fix ICH7M BSOD.

Added
- AM9\ AMD SATA AHCI Controller  DriverVer=03/24/2010, 3.2.1548.37

Updated
- ADB\ Adaptec/ICP/IBM/SUN/AOC SATA/SAS RAID (W2K/WXP) from 02/08/2008, 5.2.0.15728 to 08/05/2010, 5.2.0.17911
- ADC\ Adaptec/ICP/IBM/SUN/AOC SATA/SAS RAID (W2K3) from 07/10/2008, 5.2.0.16120 to 08/05/2010, 5.2.0.17911
- I5\ Updated Intel from v9.1.2.1008 package.
- J\  JMicron JMB36X RAID from DriverVer=08/10/2010, 1.17.58.2 to 09/07/2010, 1.17.59.0
- M4\ Marvell 64xx/63xx SAS Controller from 01/27/2009,3.1.0.22 to 10/27/2009,3.1.0.2407
- S2\ Silicon Image ATA/133 from 11/13/2007, 1.2.30.0 to 07/28/2009, 1.2.30.1
- S2A\ Silicon Image ATA/133 Medley Raid from 05/31/2002, 1.0.1.7 to 04/01/2010, 1.0.7.0


v10.09
Repacked using 32MB 7zip dictionary size.
Added
- C4\  Compaq\HP Smart Array SAS/SATA  DriverVer=02/22/2010,6.20.0.32
- H11\ Highpoint RocketRAID 62x SATA DriverVer=06/15/2010, 1.2.10.615
- H12\ Highpoint RocketRAID 64x SATA DriverVer=12/31/2009, 1.0.9.1231 
- N6r\ NVIDIA nForce 6 SATA/RAID DriverVer=11/12/2008,10.3.0.46 (no .ini entries)
- N7\  NVIDIA nForce 7/8 SATA/AHCI DriverVer=04/09/2010,11.1.0.43 (no .ini entries)
- N7r\ NVIDIA nForce 7/8 SATA/RAID DriverVer=04/09/2010,11.1.0.43 (no .ini entries)
- V4\  VIA StorX Storage Controller DriverVer = 04/30/2010,7.0.7600.105

Updated
- AM0\ AMD SATA Controller SB600, SB700, SB800(AHCI Mode)
  Updated to DriverVer=05/05/2009,1.2.0.125 (AHCI)
- AM1\ AMD SATA Controller SB600, SB700, SB800(IDE Mode)
  Updated to DriverVer=07/08/2009,5.2.0.57 (IDE)
- H1\  Highpoint RocketRAID 174X SATA
  Updated to DriverVer=10/23/2007, 2.0.7.1023
- H1s\  Highpoint RocketRAID 174X SATA
  Updated to DriverVer=10/23/2007, 2.0.7.1023
- H5\  Highpoint RocketRAID 2220 SATA
  Updated to DriverVer=10/26/2007, 1.9.7.1026
- H8\  Highpoint RocketRAID 2300 SATA
  Updated to DriverVer=06/11/2009, 2.3.9.611
- H10\  Highpoint RocketRAID 3xxx/4xxx SATA
  Updated to DriverVer=04/28/2009, 1.2.28.28
- I4\ Intel Rapid Storage Technology 
  Updated to  Driver 03/03/2010,9.6.0.1014
- IT\ IT8212 ATA RAID controller
  Updated to DriverVer=09/17/2007,1.7.2.9 (last version, phased out)
- J\  JMicron JMB36X RAID 
  Updated to DriverVer=08/10/2010, 1.17.58.2
- M\  Marvell 61xx RAID Controller
  Updated to DriverVer=01/27/2010,1.2.0.7300
- M3\  Marvell Serial ATA Gen 1,2,3 PCI-X Adapter
  Updated to DriverVer=09/10/2006,3.6.3.3
- M5\  Marvell 91xx AHCI SATA 6G Controller
  Updated to DriverVer=06/30/2010,1.0.0.1042
- N6\  NVIDIA nForce 6 SATA/AHCI 
  Updated to DriverVer=11/12/2008,10.3.0.46 (and modified .ini for txtsetup)
- SS\ SiS 180/181 RAID Controller
  Updated to DriverVer=05/03/2005,5.1.1039.1090
- SS1\ SiS 0182/1182 RAID Controller
  Updated to DriverVer=01/11/2007,5.1.1039.2110
- V\ VIA RAID Controller
  Updated to 02/23/2010, 5.1.7600.593 (5.90A)
- V3\ VIA SATA/PATA IDE controller
  Updated to 08/13/2009,7.0.7000.294 (2.90A)

Fixed
- I\ Restored original txtsetup.oem, .cat & .inf files.
- I2\ Restored original txtsetup.oem, .cat & .inf files.
- I3\ Restored original txtsetup.oem, .cat & .inf files.
- I4\ Restored official iastor4.sys (v8.9.0.1023)
- I5\ Replaced missing ICH4 drivers

Fixed .ini so won't overload Win2k memory limit.
Renamed \N8\ to \N2\ (Nforce 2/3/4)
Fixed wrong HWID in .ini [AD4] PCI\VEN_1044&DEV_A501&SUBSYS_C06610(xx)

Removed
- J1\  JMicron JMB38X SD/MMC Host Controller DriverVer=08/24/2010, 1.0.48.1
    Moved to Third Party DriverPack "Misc" to update folder X\J\


10.07.15 nightly COMPSTUFF
Updated
-[I4] Intel Matrix Storage from 01/08/2010,8.9.6.1002 to Intel Rapid Storage Technology Driver 03/03/2010,9.6.0.1014


10.06.16 COMPSTUFF
-UPDATED
J
DriverVer=01/27/2010, 1.17.55.0


10.05.29 Mr_Smartepants
Compressed folder names


10.05.22 nightly COMPSTUFF
Updated
-[I4] Intel Matrix Storage from 08/07/2009,8.9.2.1002 to 01/08/2010,8.9.6.1002


10.02.21 nightly Jeff aka OverFlow (Feb 21 2010)

Moved PCI\VEN_8086&DEV_27C5&CC_0106 back to [I3] from [I4]


10.01.25 nightly Jeff aka OverFlow (Jan 25 2010)

[D3]
Perc2 is a replacement driver for XP, and 2k3 
Fixed


10.01.24 nightly Jeff aka OverFlow (Jan 24 2010)

updated 
Replacement drivers that were missing HWIDs
(If a driver is a replacement it MUST replace all HWIDs supported by the previous driver ;).

dpti2o  [AD4] 
- verified

adpu160m [AD5]
- restored hwid
PCI\VEN_9005&DEV_0081

symc8xx [C] ms_1
- need special case for a single driver that replaces two or more native drivers...
- Fixed, simply assign no HWIDs to one or more (ms_X) section(s)
- combined old ms_2 and ms_3 into ms_1
symc810 [C] ms_2
- see above. replaced.
sym_hi  [C] ms_3 
- ms_2 is also replaced
-- see section for example!

mraid35x [L2]
-missing / added
PCI\VEN_8086&DEV_1960&SUBSYS_0493101E
PCI\VEN_8086&DEV_1960&SUBSYS_0475101E

-Lost Hwids? Not referenced / listed in MRAID35X.inf. 
 These were previously left behind by BASE (not removed or added)
 the driver should still work for these HWIDs but they are not specifically listed in MRAID35X.inf.
 the updates to BASE 10.x will remove these from txtsetup. They might need to be re-added to the mass ini, 
 however they should be picked up / covered by the super-generic PCI\VEN_101E&DEV_9060 that IS still listed ;)
 (they are probably just redundant)
 PCI\VEN_8086&DEV_1960&SUBSYS_04671028
 PCI\VEN_8086&DEV_1960&SUBSYS_11111028
 PCI\VEN_8086&DEV_1960&SUBSYS_11111111
 PCI\VEN_8086&DEV_1960&SUBSYS_11121111
 PCI\VEN_8086&DEV_1960&SUBSYS_03A2113C
 PCI\VEN_8086&DEV_1960&SUBSYS_04711028
 PCI\VEN_8086&DEV_1960&SUBSYS_0475101E
 PCI\VEN_8086&DEV_1960&SUBSYS_04931028
 PCI\VEN_8086&DEV_1960&SUBSYS_0493101E
 PCI\VEN_8086&DEV_1960&SUBSYS_04931028

[L11] 
-Change ms_1_exc_skipIfOS="w2k3" to ms_1_exc_skipIfOS="w2k3,wxp" Mraid2k only supports Win2k ;)
 At least according to the L6MRAIDX.inf - again it may work, but it is definately not supported.
 This may need to be changed back. Note: Two of these HWIDs were originaly / natively listed for [L2] 
 - native mraid35x lists PCI\VEN_101E&DEV_1960&SUBSYS_04931028 and PCI\VEN_101E&DEV_1960&SUBSYS_04711028. 

dac2w2k [L3] ms_1
-
dac960nt [L3] ms_2
-Lost Hwids? Not referenced / listed in any infs in this folder. 
 These were previously left behind by BASE (not removed or added)
 the driver may still work for these HWIDs but they are not specifically supported any inf.
 the updates to BASE 10.x will remove them from txtsetup. They might need to be re-added to the mass ini, 
 PCI\VEN_1069&DEV_0001
 PCI\VEN_1069&DEV_0002
 PCI\VEN_1069&DEV_0010

ultra [P8]
-the native driver supports specific HWIDS that are not listed in the replacement drivers section 
 These were previously left behind by BASE (not removed or added) they may need to be re-added.
 PCI\VEN_105A&DEV_4D68&CC_0180
 PCI\VEN_105A&DEV_4D30&CC_0180
 PCI\VEN_105A&DEV_0D30&CC_0180
 PCI\VEN_105A&DEV_4D38&CC_0180
 Similar versions of these HWIDs are included in the driver inf and mass.ini and may suffice.

 ql12160 [Q4]
-the native driver supports a specific HWID that is not listed in the replacement drivers section 
 These were previously left behind by BASE (not removed or added) it may need to be re-added.
 PCI\VEN_1077&DEV_1216&SUBSYS_01078086

siside [SIS3]
-Not a replacement driver for XP. fixed.

viaide [V3]
- verified

-[PD] [REQ] Promise Fasttrak TX4200 Win2k3 support
commented out the skip w2k3 line in the MassStorage.inf
http://forum.driverpacks.net/viewtopic.php?id=4027


909r6 (1 September 2009)

Updated
-[J] JMicron from 02/19/2009, 1.17.47.11 to 08/11/2009, 1.17.50.2
-[M] Marvel 61xx RAID from 07/22/2008,1.2.0.60 to 08/06/2009,1.2.0.7100
-[I4] Intel Matrix Storage from 06/04/2009,8.9.0.1023 to 08/07/2009,8.9.2.1002

New
-[I7] Intel(R) iSCSI Setup Driver 07/01/2009,2.1.11.3


908129 (29 August 2009)

Renamed folders for 3Ware storage controllers
-[3] is now 3ware Escalade 6000 Storage Switch
-[3B] is now AMCC 3ware 7000/8000 Series ATA RAID
-[3C] is now AMCC 3ware 9000 Series SATA RAID/SAS

Fixed
-in INI file re-added section for AMCC 3ware 9000 Series
-INI file to Reflect new ordering & naming of 3Ware dirs as above

Updated
-[3B] AMCC 3ware 7000/8000 Series ATA RAID from 05/13/2004,1.15.00.014 to 04/08/2008,1.15.00.052

908r5 (24  August 2009)

Changed
-[I4] Added OEM file (JakeLD)
-[AM2] Added OEM file (JakeLD)

New
-[M5] Marvell 9xxx AHCI SATA Controller (JakeLD)
-[PD] Promise FastTrak TX4200/TX4300 11/08/2005, 2.06.0.311 (GregB)

Fixed
-[I5] Removed obsolete files (JakeLD)
-[P] Fixed service name in INF (GregB)
-Renamed duplicated sys file along with their service name in [I2],[I3],[I4].[NV4],[NV4IN],[NV5],[SA],[SA2],[SB2],[SB3],[SB4].[SB5] (GregB)


908r4a (17 August 2009)

Fixed
-Reordered 3Ware drivers in INI file (mindwwarper)
  [3C] becomes first
  [3B] remains same second
  [3] becomes third


907r3 (30 July 2009)

Fixed
-[M] Marvel 61xx RAID, replaced x64 driver by the i386

Changed
-[P4K] & [P4S] removed, covered by the [P4] driver


907r2 (28 July 2009)

Updated
-[M] Marvel 61xx RAID from 07/22/2008,1.2.0.60 to 02/08/2009,1.2.0.68
-[V3] VIA SATA/PATA from 12/05/2008,6.0.6000.275 to 04/02/2009,6.0.6001.282 [5.24a]
-[J] JMicron from 02/19/2009, 1.17.47.11 to 07/17/2009, 1.17.49.4
-[I5] Intel Chipset 9.1.1.1015
-[P4S] Promise FastTrak S150 SX4 from 05/20/2004, 2.00.00.25 to 09/27/2004, 2.00.64.23 (ef)
-[AR] ARECA ARC-1210 SAS RAID from 03/22/2007,6.20.00.14 to 04/04/2007,6.20.00.15
-[M4] Marvell 64xx/63xx SAS from 12/06/2007,2.1.0.11 to 01/27/2009,3.1.0.22
-[AM2] AMD AHCI Compatible RAID 7xx from 08/30/2008, 3.1.1540.81 to 03/17/2009, 3.1.1540.127 [Catalyst 9.7]

Fixed
-Changed [AM] & [AM1] sections to fix a BSOD with AMD IDE driver (cfp)

New
-[H4], [H4K], [H4S] Highpoint RocketRAID 26xx SAS 05/13/2009, 1.1.9.513 (alur)
-[D3] Dell PERC 2, 2/Si, 3/Si, 3/Di 02/25/2004, 2.8.0.6085
-[ADD] ADAPTEC/HP Embedded G5 SATA RAID 11/29/2007,1.4.17015.0


907r1 (12 July 2009)

Updated
-[I4] Intel Matrix Storage to 06/04/2009,8.9.0.1023 (SamLab)


906n2 (21 June 2009)

Updated
-[I4] Intel Matrix Storage from 04/27/2009,8.8.2.1001 to 04/10/2009,8.9.0.1015 (SamLab)


906n1 (9 June 2009)

Fixed by SamLab - Undo this changes:
-[AM1] AMD PCI SATA/IDE from 10/11/2007,5.1.0.8 to 06/18/2008,5.1.0.8
-[N7] Nvidia nForce 11/12/2008,10.3.0.46
-[N5] and [N6] Removed; covered by [N7]

Updated
-[I4] Intel Matrix Storage from 09/12/2008,8.6.0.1007 to 04/27/2009,8.8.2.1001 (SamLab)


905r2 (15 Mat 2009)

-Removed DP*.inf from L8
-Added L8r folder with older SYMMPI.INF - version XP.10
-Restored support for legacy Controlers dropped in newer 
-SYMMPI.INF - version XP.11 in L8
-Fixed VMWare support
 

905r1 (10 May 2009)

Fixed
-All Intel INI sections were redone from scratch
-[I4] fixed errors in dpsI4.inf
-Added AHCI support for PCI\VEN_8086&DEV_24D1&CC_0106 and PCI\VEN_8086&DEV_2651&CC_0106
-[AM3] Removed duplicate hwids covered by [AM2]
-[L10] Downgraded to the last signed driver 03/20/2006,1.21.15.00
-[AD5] Removed "%" sign
-[S4] Removed PCI\VEN_1002&DEV_436E&SUBSYS_436E1002, PCI\VEN_1002&DEV_4379&SUBSYS_43791002 and PCI\VEN_1002&DEV_437A&SUBSYS_437A1002 ; covered by [S5]
-[N5] and [N6] Removed; covered by [N7]

New
-[P6K] Promise SATA150 TX Series IDE for Windows 2000 06/12/2003, 1.00.0.27
-[P6S] Promise SATA150 TX Series IDE for Windows 2003 06/12/2003, 1.00.0.27
-[N7] Nvidia nForce 11/12/2008,10.3.0.46
-[TOS] Toshiba RAID 02/20/2007, 1.10.0016

Updated
-[L8] LSI Logic SAS 3000/Dell SAS 5X/6I from 06/03/2008,1.28.03.00 to 07/09/2008,1.28.03.01
-[AM1] AMD PCI SATA/IDE from 10/11/2007,5.1.0.8 to 06/18/2008,5.1.0.8
-[AM2] AMD AHCI Compatible RAID 7xx from 03/07/2008, 3.1.1540.50 to 08/30/2008, 3.1.1540.81
-[I4] Intel Matrix Storage from 09/12/2008,8.6.0.1007 to 02/11/2009,8.8.0.1009
-[J] JMicron JMB36X\37X from 12/18/2008, 1.17.45.04 to 02/19/2009, 1.17.47.11   
-[I5] Intel Chipset SATA/IDE 9.1.0.1012
-[ADC] ADAPTEC/ICP/IBM/SUN/AOC SATA/SAS RAID from 02/08/2008,5.2.0.15728 to 07/10/2008,5.2.0.16120
-[P7] Promise SATAII150/SATA300 TX from 06/30/2005, 1.00.0.33 to 05/16/2007, 1.00.0.39


v9.01
Changed:
- [I3] Intel Maxtrix Storage 09/29/2007,7.8.0.1012, support hardware not covered by new Intel driver
- [AD2] removed
- [IB4] removed
- [IB5] removed
- [V4] removed, covered by [V3]
- [NV5] removed %NVSTOR_DESC%=Crush11_Inst,PCI\VEN_10DE&DEV_037F&CC_0104 from INF
- [NV6] removed %NVSTOR_DESC%=Crush11_Inst,PCI\VEN_10DE&DEV_0266&CC_0104 from INF
- [L6] renamed to [L11]
- [L7] renamed to [L5]
- [L8] renamed to [L6]
- [D1] removed, covered by new [L8]
- [D2] removed, covered by new [L9]
- [D3] renamed to [D1]

Fixed:
- [AD] removed, covered by [h]
- [H4] removed, covered by [h]
- [C] Split ini into 3 sections, driver is natively supported by xp and 2003
- All INI device name were standardised
- [V1] Added VIA Raid INI section back
- [I5] removed ich8ahci.inf,ich8ahci.cat,ich9ahci.inf and ich9ahci.cat;covered by [I4]
- Rework all Nvidia INI sections
- [AU] removed, natively supported by XP SP3,2K3 SP2
- [AM] added replaceIfOS="w2k3" to INI, removed PCI\VEN_1002&DEV_4380, tag name updated
- [AM2] added PCI\VEN_1002&DEV_4391&SUBSYS_11171043 in INI and INF
- [V3] added missing hwids, changed tag name to replace native driver
- [AM],[AM1],[AT],[AU],[E],[NV5],[NV6],[NVTM],[SIS3] and [V3] changed ms_1_isBusExtender=true
- [P7] Removed invalid HWID, changed device name to be unique
- [J] jraid_i.inf causes BSOD in AHCI/RAID modes and was removed
- PCI\VEN_8086&DEV_2829 moved from [I4] to [I3] section in the INI; fix a bug with Virtual Box SATA

Fixed:
- [ADC] Adaptec SAS/SATA-II RAID for server 2003, 02/08/2008,5.2.0.15728
- [AM1] AMD PCI SATA/IDE Controller 10/11/2007,5.1.0.8
- [AM2] AMD AHCI RAID 7xx 03/07/2008, 3.1.1540.50
- [AM3] AMD AHCI RAID 6xx 08/08/2007, 2.500.1540.47
- [H3K] Highpoint RocketRaid RR182x/181x for windows 2000
- [H3S] Highpoint RocketRaid RR182x/181x for windows 2003
- [I4] Matrix Storage 09/12/2008,8.6.0.1007
- [SIS3] SiS 5513/5518 IDE UDMA 09/15/2003,5.1.1039.2041
- [3C] 3ware Escalade 7000/8000 05/13/2004,1.15.00.014
- [I5] Intel IDE/SATA drivers from chipset 9.1.0.1007
- [b] Broadcom HT1000 SATA 02/27/2007,1.1.7057.1
- [L6] LSI Embedded MegaRAID/Intel Embedded Server RAID Technology II 06/26/2008, 11.02.0626.2008
- [L7],[L8] LSI Logic SAS 3000/Dell SAS 5X/6I 06/03/2008,1.28.03.00
- [L10] LSI Logic Ultra320 SCSI RAID/2000/VMWare LSI 06/03/2008,1.28.03.00
- [L4] LSI MegaRAID SAS RAID XP 02/14/2008,2.20.0.32

Updated:
- [INI] Initio INIC162X SATA RAID 07/08/2005, 5.05.05.0708
- [ADB] Adaptec SAS/SATA-II RAID for XP, from 09/15/2007, 5.2.0.15317 to 02/08/2008, 5.2.0.15728
- [M] Marvell 61XX RAID controller from 10/18/2007,1.2.0.51 to 07/22/2008,1.2.0.60
- [D2] Dell Perc 6i from 12/15/2006,2.8.0.32 to 06/06/2007,2.14.0.32
- [C2] Compaq\HP ProLiant B400i/E200/E200i/E500/P400/P400i/P600/P700m/P800 from 06/16/2006, 5.8.0.32 to 08/29/2008,6.13.0.32
- [H9],[H9S] Highpoint RocketRAID 172x SATA from 06/12/2007, 1.0.7.612 to 10/29/2007, 1.1.7.1029
- [h] HighPoint Rocket 100/133/HPT3xx ATA RAID 01/05/2004, 2.351
- [Q3] QLogic QLA23xx/QLA24xx PCI Fibre Channel from 06/13/2002,8.1.5.12 to 05/22/2008,9.1.7.18
- [L2] LSI Logic MegaRAID Enterprise 1200 RAID from 01/08/2004,6.41.32 to 08/15/2007,6.51.2.32
- [C1] Compaq\HP Smart Array 5x/6x from 10/26/2006, 5.74.0.32 to 09/21/2007, 5.80.0.32
- [AD5] Adaptec Ultra160 SCSI from 03/19/2002,6.2.0000.000 to 02/04/2004,6.4.630.100
- [SC] Silicon Image SiI 3132 SoftRaid 5 from 03/31/2005, 1.2.3.1 to 05/30/2007, 1.5.18.0
- [L5] LSI MegaRAID SAS RAID 2K/2K3 from 05/05/2006,1.20.0.32 to 12/03/2007,2.20.0.32
- [J] JMicron JMB36X from 06/17/2008, 1.17.38.05 to 11/03/2008, 1.17.43.05
- [V1],[V2] and [V3] updated to Hyperion 5.22a


v8.05
Changed:
- Renamed I4\ to I6\ ([I6] intel RAID/Cluster Miniport)
- [P7] correction in INI, a disabled HWID was re-enabled.
- PB\ folder and [PB] INI section deleted (P7\ covers this)
- Deleted a redundant copy Kopie van si3132r5.inf
- Deleted redundant DpInst.exe from IB4\ and IB5\ folders

Fixed:
- [V3] INI rewrite. Windows 2000 needs both HWIDS while XP and 2003 need only one

Fixed:
- [M4] Marvell 64xx/63xx SAS Controller 12/06/2007,2.1.0.11 (JakeLD)

Updated:
- J\ JMicron JMB36X/37X Controller from 11/26/2007, 1.17.31.00 to 04/03/2008, 1.17.33.03 (JakeLD)
- N\6\ from 05/04/2007,10.1.0.12 to 07/27/2007,10.1.0.15
- V4\ VIA SATA from 10/18/2007,6.0.6000.230 [5.16a] to 04/03/2008,6.0.6000.252 [5.17a] (JakeLD)
- [SB5] Silicon Image 3132 SATALink from 06/05/2007, 1.0.21.1 to 10/03/2007, 1.0.22.0

v8.04
Changed:
- INI change; sorted Silicon Image sections into THREE blocks
- Marked blocks Silicon Image softRAID (aka RAID-5) and Silicon Image RAID and Silicon Image NON-RAID
- Silicon Image NON-RAID load after softRAID-5 and RAID.
- [S8A] silicon Image removed (see [S8]).

Fixed:
- INI Fixes in [C1], [C3], [D1], [L2], [N-6] (OverFlow.) 
- INI fix, [S8] supports HWIDS we had in [S8A]

Updated:
- [S2] from 11/15/2006, 1.2.26.0 to 11/13/2007, 1.2.30.0
- [S4] from 04/13/2007, 1.3.68.2 to 06/28/2007, 1.3.70.0
- [S7A] from 11/02/2004, 1.0.0.8 to 10/03/2007, 1.0.21.0
- [S8] from 08/22/2006, 1.3.20.0 to 11/20/2007, 1.3.21.0
- [V] from 07/12/2007, 5.1.6000.562 to 01/22/2008, 5.1.6000.574 [5.16a] (JakeLD)


v8.02.1
Changed:
- INI change; sorted Silicon Image sections into two blocks
- Marked blocks Silicon Image NON-RAID and Silicon Image RAID
- Made RAID block load after NON-RAID.
- If you want to load RAID BEFORE NON-RAID, move the entire block before the NON-RAID.
- A section move like this can be be done. Repack D and INI and test-run it.

Fixed:
- [V3] from 10/17/2006,6.0.5728.160 to 09/21/2007,6.0.6000.182


v8.02
Fixed:
- [V3] RE-enabled TxTmode section for MiniIDE.
- [AD9],[P],[P-K],[P-S] removed incorrect "IDE-mode" tags
- [V4] removed 3 HWIDs for TxTmode (suspected to compete with [V3] despite "IDE-mode" tags.)

Fixed:
- [S3] Silicon Image Si3531, 11/13/2007, 1.5.18.8 (Jaak/Helmi)
- [L1] LSI MegaRAID IDE for INTEL, 06/30/2006,4.4.0630.2006 (Jaak)

Updated:
- [M] Marvell 61xx RAID, from 02/09/2007,1.2.0.24 to 10/18/2007,1.2.0.51 (Jaak)
- [S7B] Silicon Image 3114 SoftRaid 5, from 10/18/2005, 1.3.0.9 to 02/05/2007, 1.5.15.0 [WU] (Jaak/Helmi)


v8.01
Changed:
- Disabled [V3] TxTmode section for MiniIDE. We let PnP work out VIA HyperionPro. (Jaak)

Fixed:
- LSI_SAS.sys Filename Case issue when one streamed server

Fixed:
- [D1] Dell SAS 5x/6i (WXP) 02/09/2007,1.24.04.00 (Jaak)
- [PC] Promise FastTrak TX4310 07/17/2006, 2.06.1.318 (JakeLD)

Updated:
- [D2] Dell SAS 5x/6i (Server 2003) from 11/17/2005,1.21.08.00 to 02/09/2007,1.24.04.00 (JakeLD/Jaak)
- [V3] Via SATA/PATA IDE from 10/17/2006,6.0.5728.160 to 09/21/2007,6.0.6000.182 [HyperionPro 5.15a](JakeLD)
- [V4] Via SATA IDE from 03/23/2007,6.0.6000.212 to 10/18/2007,6.0.6000.230 [HyperionPro 5.15a] (JakeLD)