Can't get BitTorrent to Download DP_MassStorage

TechDud,

What is RC?  How does this help me to get the file I need which DriverPacks.net says can only be downloaded with BitTorrent?

klhpraise

TechDud,

I followed your link and was able to download
DP_MassStorage_wnt5_86-32_10=303r2.7z.

I followed all the instructions in the which Luke Maciak posted in
his post Creating BartPE from Windows XP Dell OEM CD found at 

http://www.terminally-incoherent.com/bl … ll-oem-cd/

and I  still can't create a BartPE or UBCD4Win Boot CD which will recognize either my Hard Drive or my Seagate FreeAgent USB backup drive.

Thanks for the help in getting to the getting to the above file.  Do you know anywhere I can go to get some help at getting the ability to create one of the prementioned Boot disks which will actually recognize my Storage devices?  I have been trying to figure this out now for a couple of months and haven't really made any true headway.

klhpraise

TechDud,

I am not sure what you are requesting here:

Why not post your HWID's (link in either my or OverFlow's or Mr_Smartepants' signature) and DP_BASE.log?
It could also be an until-now unreported issue with the current RC (at least).

I don't know know what you mean by linking in the above signatures.
When replying to a post how do I do that?

Here are my HWIDs:

===========
PCI Devices
===========
PCI\VEN_1002&DEV_5B60&SUBSYS_03021002&REV_00\4&16EC1A1&0&0008: RADEON X300 Series
PCI\VEN_1002&DEV_5B70&SUBSYS_03031002&REV_00\4&16EC1A1&0&0108: RADEON X300 Series Secondary
PCI\VEN_14E4&DEV_1677&SUBSYS_01771028&REV_01\4&1D7EFF9E&0&00E0: Broadcom NetXtreme 57xx Gigabit Controller
PCI\VEN_8086&DEV_1080&SUBSYS_10001028&REV_04\4&10416D21&0&10F0: Intel(R) 537EP V9x DF PCI Modem
PCI\VEN_8086&DEV_244E&SUBSYS_00000000&REV_D3\3&172E68DD&0&F0: Intel(R) 82801 PCI Bridge - 244E
PCI\VEN_8086&DEV_2584&SUBSYS_00000000&REV_04\3&172E68DD&0&00: Intel(R) 925X/XE Memory Controller Hub - 2584
PCI\VEN_8086&DEV_2585&SUBSYS_00000000&REV_04\3&172E68DD&0&08: Intel(R) 925X/XE PCI Express Root Port - 2585
PCI\VEN_8086&DEV_2640&SUBSYS_00000000&REV_03\3&172E68DD&0&F8: Intel(R) 82801FB LPC Interface Controller - 2640
PCI\VEN_8086&DEV_2652&SUBSYS_01771028&REV_03\3&172E68DD&0&FA: Intel(R) 82801FR SATA AHCI Controller
PCI\VEN_8086&DEV_2658&SUBSYS_01771028&REV_03\3&172E68DD&0&E8: Intel(R) 82801FB/FBM USB Universal Host Controller - 2658
PCI\VEN_8086&DEV_2659&SUBSYS_01771028&REV_03\3&172E68DD&0&E9: Intel(R) 82801FB/FBM USB Universal Host Controller - 2659
PCI\VEN_8086&DEV_265A&SUBSYS_01771028&REV_03\3&172E68DD&0&EA: Intel(R) 82801FB/FBM USB Universal Host Controller - 265A
PCI\VEN_8086&DEV_265B&SUBSYS_01771028&REV_03\3&172E68DD&0&EB: Intel(R) 82801FB/FBM USB Universal Host Controller - 265B
PCI\VEN_8086&DEV_265C&SUBSYS_01771028&REV_03\3&172E68DD&0&EF: Intel(R) 82801FB/FBM USB2 Enhanced Host Controller - 265C
PCI\VEN_8086&DEV_2660&SUBSYS_00000000&REV_03\3&172E68DD&0&E0: Intel(R) 82801FB/FBM PCI Express Root Port - 2660
PCI\VEN_8086&DEV_2662&SUBSYS_00000000&REV_03\3&172E68DD&0&E1: Intel(R) 82801FB/FBM PCI Express Root Port - 2662
PCI\VEN_8086&DEV_266A&SUBSYS_01771028&REV_03\3&172E68DD&0&FB: Intel(R) 82801FB/FBM SMBus Controller - 266A
PCI\VEN_8086&DEV_266E&SUBSYS_01771028&REV_03\3&172E68DD&0&F2: SoundMAX Integrated Digital Audio
PCI\VEN_8086&DEV_266F&SUBSYS_01771028&REV_03\3&172E68DD&0&F9: Intel(R) 82801FB/FBM Ultra ATA Storage Controllers - 266F
19 matching device(s) found.

===========
USB Devices
===========
USB\ROOT_HUB\4&13D4A894&0                                   : USB Root Hub
USB\ROOT_HUB\4&23EBB0E4&0                                   : USB Root Hub
USB\ROOT_HUB\4&38E12135&0                                   : USB Root Hub
USB\ROOT_HUB\4&3A7A024A&0                                   : USB Root Hub
USB\ROOT_HUB20\4&B0EB059&0                                  : USB Root Hub
USB\VID_051D&PID_0002\3B0826X29446__                        : American Power Conversion USB UPS
USB\VID_413C&PID_5305\6Q5VPG1                               : USB Composite Device
USB\VID_413C&PID_5305&MI_00\6&CAAEDA&3&0000                 : Dell V305
USB\VID_413C&PID_5305&MI_01\6&CAAEDA&3&0001                 : USB Printing Support
USB\VID_413C&PID_5305&MI_02\6&CAAEDA&3&0002                 : USB Mass Storage Device
USB\VID_413C&PID_5305&MI_03\6&CAAEDA&3&0003                 : USB Human Interface Device
USBPRINT\DELL_V305\7&2DEAD21B&0&USB001                      : Dell V305
USBSTOR\DISK&VEN_DELL&PROD_USB_MASS_STORAGE&REV__200\7&10FFEDE8&0&6Q5VPG1&0: Dell USB Mass Storage USB Device
13 matching device(s) found.

=============
Input Devices
=============
HID\VID_051D&PID_0002\6&125CAEEB&0&0000                     : APC Battery BackUP
HID\VID_413C&PID_5305&MI_03\7&38DFBE07&0&0000               : HID-compliant device
2 matching device(s) found.

============
ACPI Devices
============
ACPI\FIXEDBUTTON\2&DABA3FF&0                                : ACPI Fixed Feature Button
ACPI\GENUINEINTEL_-_X86_FAMILY_15_MODEL_4\_0                : Intel(R) Pentium(R) 4 CPU 3.00GHz
ACPI\GENUINEINTEL_-_X86_FAMILY_15_MODEL_4\_1                : Intel(R) Pentium(R) 4 CPU 3.00GHz
ACPI\PNP0000\4&3BB7459&0                                    : Programmable interrupt controller
ACPI\PNP0100\4&3BB7459&0                                    : System timer
ACPI\PNP0103\2&DABA3FF&0                                    : High Precision Event Timer
ACPI\PNP0200\4&3BB7459&0                                    : Direct memory access controller
ACPI\PNP0303\4&3BB7459&0                                    : PS/2 Keyboard
ACPI\PNP0401\4&3BB7459&0                                    : ECP Printer Port (LPT1)
ACPI\PNP0501\1                                              : Communications Port (COM1)
ACPI\PNP0800\4&3BB7459&0                                    : System speaker
ACPI\PNP0A03\4                                              : PCI bus
ACPI\PNP0B00\4&3BB7459&0                                    : System CMOS/real time clock
ACPI\PNP0C01\1                                              : System board
ACPI\PNP0C01\B                                              : System board
ACPI\PNP0C02\17                                             : Motherboard resources
ACPI\PNP0C04\4&3BB7459&0                                    : Numeric data processor
ACPI\PNP0C0C\2&DABA3FF&0                                    : ACPI Power Button
ACPI\PNP0F13\4&3BB7459&0                                    : PS/2 Compatible Mouse
ACPI_HAL\PNP0C08\0                                          : Microsoft ACPI-Compliant System
ROOT\ACPI_HAL\0000                                          : ACPI Multiprocessor PC
21 matching device(s) found.

============
HDA Audio
============
No matching devices found.

============
RAID Devices
============
PCI\VEN_8086&DEV_2652&SUBSYS_01771028&REV_03\3&172E68DD&0&FA
    Name: Intel(R) 82801FR SATA AHCI Controller
    Hardware ID's:
        PCI\VEN_8086&DEV_2652&SUBSYS_01771028&REV_03
        PCI\VEN_8086&DEV_2652&SUBSYS_01771028
        PCI\VEN_8086&DEV_2652&CC_010601
        PCI\VEN_8086&DEV_2652&CC_0106
    Compatible ID's:
        PCI\VEN_8086&DEV_2652&REV_03
        PCI\VEN_8086&DEV_2652
        PCI\VEN_8086&CC_010601
        PCI\VEN_8086&CC_0106
        PCI\VEN_8086
        PCI\CC_010601
        PCI\CC_0106
PCI\VEN_8086&DEV_266F&SUBSYS_01771028&REV_03\3&172E68DD&0&F9
    Name: Intel(R) 82801FB/FBM Ultra ATA Storage Controllers - 266F
    Hardware ID's:
        PCI\VEN_8086&DEV_266F&SUBSYS_01771028&REV_03
        PCI\VEN_8086&DEV_266F&SUBSYS_01771028
        PCI\VEN_8086&DEV_266F&CC_01018A
        PCI\VEN_8086&DEV_266F&CC_0101
    Compatible ID's:
        PCI\VEN_8086&DEV_266F&REV_03
        PCI\VEN_8086&DEV_266F
        PCI\VEN_8086&CC_01018A
        PCI\VEN_8086&CC_0101
        PCI\VEN_8086
        PCI\CC_01018A
        PCI\CC_0101
2 matching device(s) found.
**************************************************
Some System Info:

Dell Dimension 8400
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: Intel(R) Pentium(R) 4 CPU 3.00GHz, x86 Family 15 Model 4 Stepping 3
Processor Count: 2
RAM: 3326 Mb
Graphics Card: RADEON X300 Series, 128 Mb
Hard Drives: C: Total - 72159 MB, Free - 21273 MB;
Motherboard: Dell Inc., 0U7077
Antivirus: AVG Anti-Virus Free, Updated: Yes, On-Demand Scanner: Enabled

Since I was able to finally download  a copy of the DP_MassStorgae_wnt5_x86-32_1303r2.7z file (Although I couldn't get it through BitTorrent), should we be moving this post to the BartPE - UBCD4Win - WinPE Forum? 

klhpraise

TechDud,

I am sorry, but in my last post reply I neglected to put a copy of the
DP_BASE.log as you requested.

Here it is!

 2013-03-16 20:50:34 : <INIT> DriverPacks BASE 10.06 initialized.
2013-03-16 20:50:34 : <INIT> Host environment: WIN_XP Service Pack 3 X86 on a X64 CPU.
2013-03-16 20:50:34 : <INIT> Created temporary working directory.
2013-03-16 20:50:34 : <INIT> Imported proxy settings from Internet Explorer.
2013-03-16 20:50:34 : <INIT> Start scanning for DriverPacks for the wnt5_x86-32 platform.
2013-03-16 20:50:34 : <INIT> 	Detected DriverPack Mass Storage 1303r2!
2013-03-16 20:50:34 : <INIT> 	Could not detect any 3rd party DriverPacks for wnt5_x86-32.
2013-03-16 20:50:34 : <INIT> 	Finished scanning.
2013-03-16 20:50:34 : <INIT> Detected settings file "C:\dp\DPs_BASE.ini".
2013-03-16 20:50:34 : <INIT> wnt5_x86-32_bartpe is the selected installation platform .
2013-03-16 20:50:34 : <INIT> Imported settings from settings file.
2013-03-16 20:50:34 : <INIT> [OptionalSettings]\QSC BartPE default (no)    was set.
2013-03-16 20:50:34 : <GUI>  Initialized GUI.
2013-03-16 20:50:34 : <GUI>  Created a list of all available language files.
2013-03-16 20:50:35 : <GUI>  Set the last used language, English, as the GUI language.
2013-03-16 20:50:54 : <GUI>  Changed Windows installation files OR export (depending on the installation platform) location to C:\ubcd4win\plugin.
2013-03-16 20:50:54 : <GUI>  wnt5_x86-32_bartpe is the selected installation platform .
2013-03-16 20:50:54 : <GUI>  DNS for DriverPacks.net failed
2013-03-16 20:50:54 : <GUI>  DNS for DriverPacks.net failed
2013-03-16 20:51:07 : <GUI>  Saved settings!
2013-03-16 20:51:07 : <GUI>  Closed GUI.
2013-03-16 20:51:07 : <SEL>  Selected module: mod_slip_wnt5_x86-32_bartpe.
2013-03-16 20:51:11 : <PREP> C:\ubcd4win\plugin\DriverPacks.net was deleted.
2013-03-16 20:51:11 : <PREP> Copying DPs_Base and the DriverPacks now
2013-03-16 20:51:11 : <PREP> C:\ubcd4win\plugin\DriverPacks.net\BASE\BASE.inf info written.
2013-03-16 20:51:11 : <PREP> C:\ubcd4win\plugin\DriverPacks.net\MassStorage\MassStorage.inf header info written.
2013-03-16 20:51:23 : <SLIP> Extracted DriverPack MassStorage to a temporary working directory.
2013-03-16 20:51:23 : <SLIP> C:\dp\tmp\DPMtmp\DriverPack_MassStorage_wnt5_x86-32.ini
2013-03-16 20:51:24 : <SLIP> Processing Mass Storage files now. This may take a minute.
2013-03-16 20:51:57 : <SLIP> Copied DriverPack MassStorage text mode driver files to BartPE Plugin folder.
2013-03-16 20:51:57 : <SLIP> Slipstreamed DriverPack MassStorage text mode driver files.
2013-03-16 20:52:09 : <SLIP> Updated the MassStorage.ini [SetValue] sections to support DP MassStorage text mode drivers.
2013-03-16 20:52:09 : <PLUGIN> Saved settings!
2013-03-16 20:52:09 : <PLUGIN> Slipstream finished in 1 minutes and 1 seconds.
2013-03-16 20:52:12 : <CLNP> Temporary working directory successfully deleted.
- = DriverPacks BASE ini settings used = -
[General]
; preferred language
prefLang	= "English"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons	= "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI		= "yes"

[Settings]
; disc/bartpe/multibootDisc
instPlatform	= "bartpe"
; trailing backslash is allowed, but not necessary
location	= "C:\ubcd4win\plugin"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks	= "select"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod	= ""
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod	= ""

; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD		= ""
; <path>, to specify a custom KTD cache location, if not specified: default (%SystemRoot%\DriverPacks)
KTDlocation	= ""
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC		= "no"

; you should only add this section if you've set [Settings]\DriverPacks to "select"
[SelectDriverPacks]
DP_MassStorage	= "no"
DP_MassStorage_textmode = "yes"
2013-03-16 20:52:12 : <CLNP> Create a DPs_Base.log backup @ C:\dp\LogFiles\DPs_BASE_13-03-16_20-52.log
2013-03-16 20:52:12 : <CLNP> Program terminated.

Also when getting HWIDs I neglected to connect my Seagate FreeAgent USB drive before-hand.

Here is the new USB section which adds 2 additional dveices not seen in last HWIDs:

=========== 
USB Devices 
=========== 
USB\ROOT_HUB\4&13D4A894&0                                   : USB Root Hub
USB\ROOT_HUB\4&23EBB0E4&0                                   : USB Root Hub
USB\ROOT_HUB\4&38E12135&0                                   : USB Root Hub
USB\ROOT_HUB\4&3A7A024A&0                                   : USB Root Hub
USB\ROOT_HUB20\4&B0EB059&0                                  : USB Root Hub
USB\VID_051D&PID_0002\3B0826X29446__                        : American Power Conversion USB UPS
USB\VID_0BC2&PID_3001\2GEXT4QJ                              : USB Mass Storage Device
USB\VID_413C&PID_5305\6Q5VPG1                               : USB Composite Device
USB\VID_413C&PID_5305&MI_00\6&CAAEDA&3&0000                 : Dell V305
USB\VID_413C&PID_5305&MI_01\6&CAAEDA&3&0001                 : USB Printing Support
USB\VID_413C&PID_5305&MI_02\6&CAAEDA&3&0002                 : USB Mass Storage Device
USB\VID_413C&PID_5305&MI_03\6&CAAEDA&3&0003                 : USB Human Interface Device
USBPRINT\DELL_V305\7&2DEAD21B&0&USB001                      : Dell V305
USBSTOR\DISK&VEN_DELL&PROD_USB_MASS_STORAGE&REV__200\7&10FFEDE8&0&6Q5VPG1&0: Dell USB Mass Storage USB Device
USBSTOR\DISK&VEN_SEAGATE&PROD_FREEAGENT&REV_102F\2GEXT4QJ   : Seagate FreeAgent USB Device
15 matching device(s) found.

klhpraise

Code-tags added for readability

Last edited by OverFlow (2013-03-19 17:11:13)

Firewall is open; because I successfully downloaded The God Father by accident from BitTorrent.

The reason for that part of the first post was to let you know that my Windows Firewall was indeed turned off; so that is not why BitTorrent wasn't able to Connect to peers to get the file I was attempting to get.

I actually never let it finish downloading the "Free Instant Download" (The God Father) found on BitTorent ; but is was connected and started the download. I had never used BitTorrent before in my life (never even knew what a torrent file was) and was just clicking on stuff attempting to get the download of DP_MassStorage_wnt5_x86-32_1209.7z (which I had started a minute or so earlier) to get out of "Connecting to peers" message and get on with the download.

I am actually one of those people who pay for almost everything I have gotten off the internet (except for free software downloads, shareware). I have never downloaded any music or videos for free.  I believe that copyright and trademarks should be respected and adhered to.  I refuse to let friends borrow and copy a Music CD or Video which I have purchased.

klhpraise

First we definitely don't support warez... so let's not let that happen again, there are plenty of legitimate torrents to test.

second your DPs_BASE.log says you do have a firewall
2013-03-16 20:50:54 : <GUI>  DNS for DriverPacks.net failed
2013-03-16 20:50:54 : <GUI>  DNS for DriverPacks.net failed

internet access is denied...

So something is fire walling you.

Looks like your BASE load built the plugins... Was your PEBuilder log without errors?

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!

The DriverPacks, the DP_Base program, and Support Forum are FREE!.

Overflow,

It probably shows those HWIDs because I do have the Windows Firewall turned on again.  I turned it on again after successfully getting the DP_MassStorage_wnt5_x86-32_1303r2.7z file from the link provided from TechDud in one of his posts. I don't want someone to get into my system again like they got into my Yahoo account about a month ago.  What a job trying to cleanup after that attack! My computer has been a mess since running all the cleaners (bot removal, spyware removal, registry repair,etc).  Somehow in this cleanup process I managed to wipe-out all my Windows Restores and am not able to get into Safe Mode anymore.

What is warez... ?

PEBuilder logs shows 3 warnings and no errors.

Warning: building from an OEM version of Windows can mean trouble...
Warning: Creating ISO-9660:1999 (version 2) filesystem.
Warning: ISO-9660 filenames longer than 31 may cause buffer overflows in the OS.
Building done...
There where 0 errors and 1 warnings

TechDud,
No, I have never messed with the Bios.
There has been no need to up to this point.
Don't have a clue how to flash the Bios.

How do I rollback textmode to v6.0.1.1002 for those 2
HWIDs?

PCI\VEN_8086&DEV_2652&CC_0106 &   PCI\VEN_8086&DEV_2652&CC_0104

Are you talking about post with link to post from "lightguy48" which has link in it to Dimension 8400?

Do I need to change my RAID setting under my Drivers icon from
RAIDAutodetect/AHCI to RAIDAutodetect/ATA as suggested in the link?

This is all new to me! The only reason I am moving down this road is to attempt to restore my computer back to the way it was in July when I was able to successfully make an image of the hard drive.  To get it back to functioning the way it was long before the attack I  described above. I was told it was very easy task to this restore the hard drive from the image file, yet it has been nothing of the sort. The Boot disks I have attempted to create to restore this image has all failed as I described in earlier posts.

klhpraise

Wow lot's to cover...

A Good answer to the question...

well that is not perfect,

you already said you knew there were obstacles to building with an OEM disc.
It is always best to build BartPE with a clean Retail (or VL) Hologramed XP SP2 source.
I have had almost no issues with using SP3 source... but SP2 is recommended.
I trust that you addressed the known issues with your source...

the second two errors should be correctable.

R U building with ubcd4win?
It is unlikely that a UBCD4Win build would have either of those issues logged.
I believe post processing would have corrected both of them before image creation.
I do recommend that you do use UBCD4Win if you are not using it.
MUCH easier for a beginner . It is specifically written to make it "mistake and omission resilient".

An easier way might be to just use an older dpms version that has that older driver... than to edit the current one. But either way it works.

easier still...
your machine should have a restore partition with a factory image on it...
you should be able to launch the restore process from your BartPE disk. (it's just like safemode)
you might also find that you can restore this factory image from the boot menu options.
(lots of manufacturers do this. Check their support site for factory restore or Recovery... you might also try OOBE)

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!

The DriverPacks, the DP_Base program, and Support Forum are FREE!.

http://en.wikipedia.org/wiki/Warez
http://forum.driverpacks.net/viewtopic.php?id=3741

Read BEFORE you post.  HWID tool   DriverPacks Tutorial   DONATE!

Not all heroes wear capes, some wear Kevlar!

As an additional note, WinSetupFromUSB v1beta bluescreens with STOP:7B in at least AHCI mode on that XPS.
Going to try v6.0.1.1002 and see if USB support can be extended here.

Forum Rules & Guidelines   HWID's tool   Unknown Devices (Win7-max) LatencyMon - NT6.x
MemTest86+    Video Memory Stress Test    D-P-C Driver Latency Tester (Win7-max)