You are not logged in. Please login or register.
DriverPacks.net Forum » DriverPack Mass Storage » [REQ] I need to integrated my ahci driver into winxp disc
Do you get a BSOD with an unmodified source?
no BSODs: setup stops 'cause windows can't find hard drives (... press F3 to restart etc)
obviously HDDs are ok
are you sure your drives are OK? they are powered on and connected to the controller?
Standby...there's a bug in the dpms .ini [LS] section.
Ah, that wasn't a bug; that was me! 
"My Bad" - attributed to Manute Bol
updated...
linked here --> * edit: link removed - Updated
see here --> http://forum.driverpacks.net/viewtopic.php?id=6622
and here --> http://forum.driverpacks.net/viewtopic.php?id=6623 
Last edited by TechDud (2013-05-10 13:13:02)
Thanks everyone. But I can 't open this link.
linked here --> DP_MassStorage_wnt5_x86-32_1301rc1
it was superseded by rc2 in the previous post to yours
Mediafire is getting to be a real pain.
It's bad enough that they have seemingly started "clickjacking" in pages, including the "Copy link to Clipboard" buttons.
Now they make it appear that one might need to pay to download.
I note that DP_MassStorage_wnt5_x86-32_1301rc1 is still downloadable from my end.
If that didn't work for you whl0806, the other links may not help either.
Last edited by TechDud (2013-05-10 13:13:38)
Blow link I can't open it yet
linked here --> DP_MassStorage_wnt5_x86-32_1301rc2
I am open to suggestions that do not make me fall afoul of my own nation's laws.
Edit: I hope that it is simply a problem with the terminal you are downloading from, or your ISP.
Last edited by TechDud (2013-01-28 18:31:05)
I can see "Intel PCH EG20T AHCI SATA Controller" when I installed win XP,used I burnt XP disc latest.But it can't find hard drives (... press F3 to restart etc)
I used DP_MassStorage_wnt5_x86-32_1301r2.7z
Last edited by whl0806 (2013-01-28 20:19:17)
I can see "Intel PCH EG20T AHCI SATA Controller" when I installed win XP,used I burnt XP disc latest.But it can't find hard drives (... press F3 to restart etc)
did you get that with both rc1 AND rc2?
If using WinSetupFromUSB, you may need to disable the DP.MS.iso.
Otherwise, you may have to install from DVD or CD (i love those rewritables), somehow.
If that doesn't work, then please post your DPs_BASE.log.
Last edited by TechDud (2013-01-28 20:08:20)
2001-01-01 00:04:17 : <INIT> DriverPacks BASE 10.06 initialized.
2001-01-01 00:04:18 : <INIT> Host environment: WIN_XP Service Pack 3 X86 on a X64 CPU.
2001-01-01 00:04:18 : <INIT> Created temporary working directory.
2001-01-01 00:04:18 : <INIT> Imported proxy settings from Internet Explorer.
2001-01-01 00:04:18 : <INIT> Start scanning for DriverPacks for the wnt5_x86-32 platform.
2001-01-01 00:04:18 : <INIT> Detected DriverPack Mass Storage 1301r2!
2001-01-01 00:04:18 : <INIT> Could not detect any 3rd party DriverPacks for wnt5_x86-32.
2001-01-01 00:04:18 : <INIT> Finished scanning.
2001-01-01 00:04:18 : <INIT> Detected settings file "C:\Documents and Settings\301\??\DPs_BASE_1006\DPs_BASE.ini".
2001-01-01 00:04:18 : <INIT> Windows XP Professional - Retail SP3 detected.
2001-01-01 00:04:18 : <INIT> wnt5_x86-32_disc is the selected installation platform .
2001-01-01 00:04:18 : <INIT> Imported settings from settings file.
2001-01-01 00:04:18 : <INIT> [OptionalSettingsOther]\ATI_cpl not specified: default (None) was set.
2001-01-01 00:04:18 : <INIT> [OptionalSettingsOther]\Nvidia_cpl not specified: default (None) was set.
2001-01-01 00:04:18 : <GUI> Initialized GUI.
2001-01-01 00:04:18 : <GUI> Created a list of all available language files.
2001-01-01 00:04:18 : <WARN> 3 Language file lng\Chinese (Simplified).lng invalid: [wnt5_x86-32_disc__GUI]\settings_dps_04 entry does not exist! The English text will be shown instead! Please contact the translator for this language (Chinese (Simplified)), gskening, in the forum to fix this!
2001-01-01 00:04:20 : <GUI> Set the last used language, Chinese (Simplified), as the GUI language.
2001-01-01 00:05:13 : <GUI> Closed GUI.
2001-01-01 00:05:13 : <GUI> Saved settings!
2001-01-01 00:05:14 : <CLNP> Temporary working directory successfully deleted.
- = DriverPacks BASE ini settings used = -
[General]
; preferred language
prefLang = "Chinese (Simplified)"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons = "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI = "yes"
[Settings]
; disc/bartpe/multibootDisc
instPlatform = "disc"
; trailing backslash is allowed, but not necessary
location = "D:\windows_xp_010913_1405"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks = "select"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod = "2"
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod = "GUIRunOnce"
; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD = "false"
; <path>, to specify a custom KTD cache location, if not specified: default (%SystemRoot%\DriverPacks)
KTDlocation = "%SystemRoot%\DriverPacks"
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC = "yes"
; you should only add this section if you've set [Settings]\DriverPacks to "select"
[SelectDriverPacks]
DP_MassStorage = "yes"
DP_MassStorage_textmode = "yes"
2001-01-01 00:05:14 : <CLNP> Create a DPs_Base.log backup @ C:\Documents and Settings\301\??\DPs_BASE_1006\LogFiles\DPs_BASE_01-01-01_00-05.log
2001-01-01 00:05:14 : <CLNP> Program terminated.
It's sorry for my RTC fail.
If using WinSetupFromUSB, you may need to disable the DP.MS.iso.
Otherwise, you may have to install from DVD or CD (i love those rewritables), somehow.
If that doesn't work, then please post your DPs_BASE.log.
Hola, bom dia
I've integrated DP rc2 in "Mode 2" and burned a CD, but it doesn't work: I can see the driver loaded during XP installation but then the setup says that there's no hard drive to install to.
HDDs are ok 'cause win 7 start without problems.
This is my DP base log:
2013-01-28 09:41:02 : <INIT> DriverPacks BASE 10.06 initialized.
2013-01-28 09:41:02 : <INIT> Host environment: WIN_7 Service Pack 1 X64 on a X64 CPU.
2013-01-28 09:41:02 : <INIT> Created temporary working directory.
2013-01-28 09:41:02 : <INIT> Imported proxy settings from Internet Explorer.
2013-01-28 09:41:02 : <INIT> Start scanning for DriverPacks for the wnt5_x86-32 platform.
2013-01-28 09:41:02 : <INIT> Detected DriverPack Chipset 1301r1!
2013-01-28 09:41:02 : <INIT> Detected DriverPack Mass Storage 1301r2!
2013-01-28 09:41:02 : <INIT> Could not detect any 3rd party DriverPacks for wnt5_x86-32.
2013-01-28 09:41:02 : <INIT> Finished scanning.
2013-01-28 09:41:02 : <INIT> Could not find settings file"C:\_q7\DPs_BASE_1006\DPs_BASE.ini".
2013-01-28 09:41:02 : <INIT> [General]\prefLang not specified: default (English) was set.
2013-01-28 09:41:02 : <INIT> [General]\wizdButtons not specified: default (yes) was set.
2013-01-28 09:41:02 : <INIT> [General]\GUI not specified: default (yes) was set.
2013-01-28 09:41:02 : <INIT> [Settings]\DPsMethod not specified: default (2) was set.
2013-01-28 09:41:02 : <INIT> [Settings]\finisherMethod not specified: default (GUIRunOnce) was set.
2013-01-28 09:41:02 : <INIT> [OptionalSettings]\KTD not specified: default (false) was set.
2013-01-28 09:41:02 : <INIT> [OptionalSettings]\QSC not specified: default (yes) was set.
2013-01-28 09:41:02 : <INIT> [OptionalSettingsOther]\ATI_cpl not specified: default (None) was set.
2013-01-28 09:41:02 : <INIT> [OptionalSettingsOther]\Nvidia_cpl not specified: default (None) was set.
2013-01-28 09:41:02 : <GUI> Initialized GUI.
2013-01-28 09:41:02 : <GUI> Created a list of all available language files.
2013-01-28 09:41:02 : <GUI> Set the last used language, English, as the GUI language.
2013-01-28 09:41:06 : <GUI> Refreshed UpdateChecker with success.
2013-01-28 09:41:22 : <GUI> Changed Windows installation files OR export (depending on the installation platform) location to C:\_q7\XP_cd.
2013-01-28 09:41:22 : <GUI> Windows XP Professional - OEM SP3 detected.
2013-01-28 09:41:22 : <GUI> wnt5_x86-32_disc is the selected installation platform .
2013-01-28 09:41:54 : <GUI> Saved settings!
2013-01-28 09:41:54 : <GUI> Closed GUI.
2013-01-28 09:41:54 : <SEL> Selected module: mod_slip_wxp_x86-32_disc_m2.
2013-01-28 09:41:55 : <PREP> Removed all attributes from \I386.
2013-01-28 09:41:55 : <PREP> No previous DriverPacks installation found, Prep stage will be skipped
2013-01-28 09:41:55 : <SLIP> QuickStream Cache available for DriverPack MassStorage text mode drivers!
2013-01-28 09:41:55 : <SLIP> C:\_q7\DPs_BASE_1006\QSC\wnt5_x86-32_uni_DP_MassStorage_1301r2_textmode\DriverPack_MassStorage_wnt5_x86-32.ini
2013-01-28 09:41:56 : <SLIP> Processing Mass Storage files now. This may take a minute.
2013-01-28 09:42:00 : <SLIP> Slipstreamed DP MassStorage text mode drivers using QuickStream Cache.
2013-01-28 09:42:00 : <SLIP> txtsetup.sif Backed-up Successfully
2013-01-28 09:42:00 : <SLIP> dosnet.inf Backed-up Successfully
2013-01-28 09:42:05 : <SLIP> Removed entries from \I386\txtsetup.sif that will be updated.
2013-01-28 09:42:06 : <SLIP> Removed entries from \I386\dosnet.inf that will be updated.
2013-01-28 09:42:47 : <SLIP> Updated \I386\dosnet.inf and \I386\txtsetup.sif to support DP MassStorage text mode drivers.
2013-01-28 09:42:47 : <SLIP> Created necessary directory structure for method 2.
2013-01-28 09:42:47 : <SLIP> Copying files necessary for method 2.
2013-01-28 09:42:47 : <SLIP> Extracted additional files necessary for method 2.
2013-01-28 09:42:47 : <SLIP> expanded setup.ex_ to setuporg.exe
2013-01-28 09:42:47 : <SLIP> SETUP.EX_ Backed-up Successfully
2013-01-28 09:42:47 : <SLIP> Compressed setup.exe to SETUP.EX_.
2013-01-28 09:42:47 : <SLIP> Method 2 setup.ex_ installed
2013-01-28 09:42:47 : <SLIP> Created \I386\presetup.cmd file.
2013-01-28 09:42:47 : <SLIP> Updated \I386\txtsetup.sif to support method 2.
2013-01-28 09:42:48 : <SLIP> Updated \I386\dosnet.inf to support method 2.
2013-01-28 09:42:48 : <SLIP> Copied DriverPack Chipset to \OEM.
2013-01-28 09:42:48 : <SLIP> Copied DriverPack Mass Storage to \OEM.
2013-01-28 09:42:48 : <SLIP> Copied DriverPacks to \OEM.
2013-01-28 09:42:48 : <SLIP> Will not slipstream patches, Service Pack 3 was detected.
2013-01-28 09:42:48 : <SLIP> Will not slipstream KB888111 because no Sound DriverPack is being slipstreamed
2013-01-28 09:42:48 : <SLIP> Will not slipstream KB883667 because no Graphics DriverPack is being slipstreamed
2013-01-28 09:42:48 : <SLIP> Updated \I386\winnt.sif to support method 2.
2013-01-28 09:42:48 : <SLIP> Updated DPsFnshr.ini to disable KTD.
2013-01-28 09:42:48 : <SLIP> Updated \I386\winnt.sif's GUIRunOnce section.
2013-01-28 09:42:48 : <SLIP> DP_Install_Tool was copied successfully
2013-01-28 09:42:48 : <SLIP> Slipstream finished in 53 seconds.
2013-01-28 09:42:51 : <CLNP> Temporary working directory successfully deleted.
- = DriverPacks BASE ini settings used = -
[General]
; preferred language
prefLang = "English"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons = "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI = "yes"
[Settings]
; disc/bartpe/multibootDisc
instPlatform = "disc"
; trailing backslash is allowed, but not necessary
location = "C:\_q7\XP_cd"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks = "select"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod = "2"
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod = "GUIRunOnce"
; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD = "false"
; <path>, to specify a custom KTD cache location, if not specified: default (%SystemRoot%\DriverPacks)
KTDlocation = "%SystemRoot%\DriverPacks"
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC = "yes"
; you should only add this section if you've set [Settings]\DriverPacks to "select"
[SelectDriverPacks]
DP_Chipset = "yes"
DP_MassStorage = "yes"
DP_MassStorage_textmode = "yes"
2013-01-28 09:42:51 : <CLNP> Create a DPs_Base.log backup @ C:\_q7\DPs_BASE_1006\LogFiles\DPs_BASE_13-01-28_09-42.log
2013-01-28 09:42:51 : <CLNP> Program terminated.Thanks for interesting
Spigul74
The txtsetup.oem has some registry keys
[Config.IOHSATA]
value = Parameters\PnpInterface,5,REG_DWORD,1
value = Parameters\Device,MaximumSGList,REG_DWORD,32
value = Parameters\Device,NumberOfRequests,REG_DWORD,64maybe these are essential?
Both of you can clear your Quick Stream Cache from the DP_BASE folder and then reintegrate.
QSC = "yes"
QuickStream Cache available for DriverPack MassStorage text mode drivers!
C:\_q7\DPs_BASE_1006\QSC\wnt5_x86-32_uni_DP_MassStorage_1301r2_textmode\DriverPack_MassStorage_wnt5_x86-32.ini
Maybe QSC="no" is best for now.
If i remember correctly, this is meant for those doing many integrations with the same packs.
If that integration doesn't work, reintegrate using DP_MassStorage_wnt5_x86-32_1301r1.
Remember to start with a virgin source (no updates, etc.) for testing.
Also,
"2001-01-01 00:04:18 : <WARN> 3 Language file lng\Chinese (Simplified).lng invalid: [wnt5_x86-32_disc__GUI]\settings_dps_04 entry does not exist!
The English text will be shown instead!
Please contact the translator for this language (Chinese (Simplified)), gskening, in the forum to fix this!"
There appears to be an updated language file
here --> http://bugtracker.driverpacks.net/view. … 1#bugnotes
Peace and prosperity in the New Year!
Zài xin de yi nián de hépíng yu fánróng!
La paz y la prosperidad en el nuevo año!(Forgive me if my translations are off, i'm using Google Translate.
I don't mind if you correct me, that is good.)
Last edited by TechDud (2013-01-29 12:52:47)
The USB ports. It's possibly the USB ports. Well, that or the unsigned Security Catalog.
"During the installation of Windows XP, only single USB device (the USB floppy disk) is
allowed to be connected to the system at USB port x23 else Windows XP installation
will not be successful. This is due to USB issue in the Intel®PCH EG20T A0 and A1
silicon."
quoted from: http://download.intel.com/design/intarc … 324213.pdf
So, what stepping are your PCH EG20T's?
"7. During the installation, the message box below may appear:
At this time, any low/full speed USB devices (for example the keyboard and mouse)
that are connected to USB port 1 (Device2:Function0), USB port 3
(Device2:Function1) and USB Port 5 (Device2:Function2) will not function for a
brief period during installation. This may appear due to an OHCI driver issue for
USB Host controller #1 (Device 2: Function 0-2). These USB ports will resume
working once you can dismiss the above message box by clicking Yes. Figure 19
indicates the internal USB port connections.The proposed workarounds for this issue are:
— For a customer design that has PS2 ports, please use a PS2 mouse and
keyboard to facilitate the installation.— For a customer design that has USB port 0/2/4 (USB Host controller #0 Device
8:Function 0-2), use those ports for the USB mouse and keyboard connection
to facilitate the installation.— For a customer design that has only ports 1/3/5 (USB Host controller #1 Device
2: Function 0-2), please connect a USB mouse and keyboard through the USB
high speed hub."
I note that Intel lists the PCH EG20T as having 2 SATA ports.
"Note: Slipstreaming the Intel®PCH EG20T SATA AHCI controller driver onto the Windows XP SP3 installer will not work."
How would they know that? A statement like that makes me think they belong to the "sore-optimist's" club! 
I am surprised that part of the XP install procedure does not involve standing on one's head whilst drinking a glass of water and headbanging "Bang your head"!
May it be that the oddball device ID originally in DP_MassStorage_wnt5_x86-32_1301r1 is what it is that is at issue.
PCI\VEN_8086&DEV_880B&CC_010601 is what is contained in DP_MS_1301r1.ini, iohsata.inf, and txtsetup.oem.
For this very reason, i believe that DP_MassStorage_wnt5_x86-32_1301r1 has the best chance of working.
Another theory i have involves that other HWID listed in txtsetup.oem for LSI (not the USB Floppy HWID's).
+1
Also, ensure that within winnt.sif that in the [Unattended] section that you have the following line (due to the iohsata driver having an unsigned Security Catalog.)DriverSigningPolicy=IgnoreI am uncertain if the [Data] section might need:
UseBIOSToBoot=0
If all else fails, here's what Damnation said earlier:
"The txtsetup.oem has some registry keys
[Config.IOHSATA]
value = Parameters\PnpInterface,5,REG_DWORD,1
value = Parameters\Device,MaximumSGList,REG_DWORD,32
value = Parameters\Device,NumberOfRequests,REG_DWORD,64maybe these are essential?"
It's either that or Y2K bit whl0806's install.
Last edited by TechDud (2013-01-30 13:57:50)
or else maybe try with all the HWIDs in the txtsetup.oem file
ms_1_hwids="PCI\VEN_8086&DEV_880B,PCI\VEN_10DB&DEV_8021,USB\VID_03F0&PID_2001,USB\VID_054C&PID_002C,USB\VID_057B&PID_0001,USB\VID_0409&PID_0040,USB\VID_0424&PID_0FDC,USB\VID_08BD&PID_1100"not sure what the other IDs are for but maybe they're needed
those are for USB\Floppy support in textmode.
don't add those.
ms_1_hwids="PCI\VEN_8086&DEV_880B,PCI\VEN_10DB&DEV_8021or
ms_1_hwids="PCI\VEN_8086&DEV_880B&CC_0106,PCI\VEN_10DB&DEV_8021&CC_0106or
ms_1_hwids="PCI\VEN_8086&DEV_880B&CC_010601,PCI\VEN_10DB&DEV_8021&CC_010601Last edited by TechDud (2013-01-29 20:27:47)
I'm new here but from what I can gather my experience may be related and helpful to this issue.
I had a BSOD on a Dell Latitude E6400 laptop when the BIOS set SATA Operation to AHCI mode and I used my DriverPacked XP CD.
I am using DPs_BASE_1006.exe and DP_MassStorage_wnt5_x86-32_1109, DP_Chipset_wnt5_x86-32_1209
When I eventually figured out it was the hard drive controller driver and that I needed the relevant AHCI driver to be within the DriverPack; I used the following method to get around it.
* In BIOS I switched to SATA Operation to ATA mode.
* Installed windows from my DriverPacked XP DVD.
* Booted windows, forced a driver change to AHCI to what I hoped was the correct AHCI driver then rebooted and switched the BIOS SATA Operation back to AHCI.
* All seems good now.
I didn't explore the Intel Rapid Restore Technology (IRRT) mentioned in the BIOS as another SATA Operation mode.
DriverPacks is very helpful and I want to help if I can.
The driver I found and the technical information is below.
HWID.txt
===========
PCI Devices
===========
PCI\VEN_1180&DEV_0822&SUBSYS_02331028&REV_21\4&A85581B&0&09F0: SDA Standard Compliant SD Host Controller
PCI\VEN_1180&DEV_0832&SUBSYS_02331028&REV_04\4&A85581B&0&08F0: OHCI Compliant IEEE 1394 Host Controller
PCI\VEN_1180&DEV_0843&SUBSYS_02331028&REV_11\4&A85581B&0&0AF0: SDA Standard Compliant SD Host Controller
PCI\VEN_14E4&DEV_432B&SUBSYS_000D1028&REV_01\4&1CD20F91&0&00E1: Broadcom 802.11n Network Adapter
PCI\VEN_8086&DEV_10F5&SUBSYS_02331028&REV_03\3&61AAA01&0&C8 : Intel(R) 82567LM Gigabit Network Connection
PCI\VEN_8086&DEV_2448&SUBSYS_00000000&REV_93\3&61AAA01&0&F0 : Intel(R) 82801 PCI Bridge - 2448
PCI\VEN_8086&DEV_2917&SUBSYS_00000000&REV_03\3&61AAA01&0&F8 : Intel(R) ICH9M-E LPC Interface Controller - 2917
PCI\VEN_8086&DEV_2929&SUBSYS_02331028&REV_03\3&61AAA01&0&FA : PCI Device
PCI\VEN_8086&DEV_2930&SUBSYS_02331028&REV_03\3&61AAA01&0&FB : Intel(R) ICH9 Family SMBus Controller - 2930
PCI\VEN_8086&DEV_2934&SUBSYS_02331028&REV_03\3&61AAA01&0&E8 : Intel(R) ICH9 Family USB Universal Host Controller - 2934
PCI\VEN_8086&DEV_2935&SUBSYS_02331028&REV_03\3&61AAA01&0&E9 : Intel(R) ICH9 Family USB Universal Host Controller - 2935
PCI\VEN_8086&DEV_2936&SUBSYS_02331028&REV_03\3&61AAA01&0&EA : Intel(R) ICH9 Family USB Universal Host Controller - 2936
PCI\VEN_8086&DEV_2937&SUBSYS_02331028&REV_03\3&61AAA01&0&D0 : Intel(R) ICH9 Family USB Universal Host Controller - 2937
PCI\VEN_8086&DEV_2938&SUBSYS_02331028&REV_03\3&61AAA01&0&D1 : Intel(R) ICH9 Family USB Universal Host Controller - 2938
PCI\VEN_8086&DEV_2939&SUBSYS_02331028&REV_03\3&61AAA01&0&D2 : Intel(R) ICH9 Family USB Universal Host Controller - 2939
PCI\VEN_8086&DEV_293A&SUBSYS_02331028&REV_03\3&61AAA01&0&EF : Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293A
PCI\VEN_8086&DEV_293C&SUBSYS_02331028&REV_03\3&61AAA01&0&D7 : Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293C
PCI\VEN_8086&DEV_293E&SUBSYS_02331028&REV_03\3&61AAA01&0&D8 : Microsoft UAA Bus Driver for High Definition Audio
PCI\VEN_8086&DEV_2940&SUBSYS_00000000&REV_03\3&61AAA01&0&E0 : Intel(R) ICH9 Family PCI Express Root Port 1 - 2940
PCI\VEN_8086&DEV_2942&SUBSYS_00000000&REV_03\3&61AAA01&0&E1 : Intel(R) ICH9 Family PCI Express Root Port 2 - 2942
PCI\VEN_8086&DEV_2944&SUBSYS_00000000&REV_03\3&61AAA01&0&E2 : Intel(R) ICH9 Family PCI Express Root Port 3 - 2944
PCI\VEN_8086&DEV_2946&SUBSYS_00000000&REV_03\3&61AAA01&0&E3 : Intel(R) ICH9 Family PCI Express Root Port 4 - 2946
PCI\VEN_8086&DEV_2A40&SUBSYS_00000000&REV_07\3&61AAA01&0&00 : Mobile Intel(R) 4 Series Chipset Processor to DRAM Controller - 2A40
PCI\VEN_8086&DEV_2A42&SUBSYS_02331028&REV_07\3&61AAA01&0&10 : Mobile Intel(R) 4 Series Express Chipset Family
PCI\VEN_8086&DEV_2A43&SUBSYS_02331028&REV_07\3&61AAA01&0&11 : Mobile Intel(R) 4 Series Express Chipset Family
25 matching device(s) found.
===========
USB Devices
===========
USB\ROOT_HUB\4&1DAB7EFA&0 : USB Root Hub
USB\ROOT_HUB\4&2113274D&0 : USB Root Hub
USB\ROOT_HUB\4&267B533E&0 : USB Root Hub
USB\ROOT_HUB\4&28F89E5E&0 : USB Root Hub
USB\ROOT_HUB\4&2F35B773&0 : USB Root Hub
USB\ROOT_HUB\4&F88EED4&0 : USB Root Hub
USB\ROOT_HUB20\4&2752B58A&0 : USB Root Hub
USB\ROOT_HUB20\4&3D9C819&0 : USB Root Hub
USB\VID_0781&PID_5406\4317011143405998 : USB Mass Storage Device
USB\VID_0A5C&PID_5800\0123456789ABCD : USB Composite Device
USB\VID_0A5C&PID_5800&MI_00\6&66DE6C9&0&0000 : Broadcom USH CV w/o Fingerprint Sensor
USB\VID_0A5C&PID_5800&MI_01\6&66DE6C9&0&0001 : USB Smart Card Reader
USB\VID_0C45&PID_63F8\5&2E1297A2&0&6 : USB Composite Device
USB\VID_0C45&PID_63F8&MI_00\6&80C982A&0&0000 : Integrated Webcam
USBSTOR\DISK&VEN_SANDISK&PROD_CRUZER&REV_8.01\4317011143405998&0: SanDisk Cruzer USB Device
15 matching device(s) found.
=============
Input Devices
=============
No matching devices found.
============
ACPI Devices
============
ACPI\ACPI0003\2&DABA3FF&0 : Microsoft AC Adapter
ACPI\GENUINEINTEL_-_X86_FAMILY_6_MODEL_23\_0 : Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz
ACPI\GENUINEINTEL_-_X86_FAMILY_6_MODEL_23\_1 : Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz
ACPI\PNP0000\4&DCE5D5B&0 : Programmable interrupt controller
ACPI\PNP0100\4&DCE5D5B&0 : System timer
ACPI\PNP0103\4&DCE5D5B&0 : High precision event timer
ACPI\PNP0200\4&DCE5D5B&0 : Direct memory access controller
ACPI\PNP0303\4&DCE5D5B&0 : Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
ACPI\PNP0800\4&DCE5D5B&0 : System speaker
ACPI\PNP0A03\2&DABA3FF&0 : PCI bus
ACPI\PNP0B00\4&DCE5D5B&0 : System CMOS/real time clock
ACPI\PNP0C01\1 : System board
ACPI\PNP0C01\2 : System board
ACPI\PNP0C01\3 : System board
ACPI\PNP0C01\4 : System board
ACPI\PNP0C01\5 : System board
ACPI\PNP0C04\4&DCE5D5B&0 : Numeric data processor
ACPI\PNP0C09\0 : Microsoft ACPI-Compliant Embedded Controller
ACPI\PNP0C0A\1 : Microsoft ACPI-Compliant Control Method Battery
ACPI\PNP0C0A\2 : Microsoft ACPI-Compliant Control Method Battery
ACPI\PNP0C0C\2&DABA3FF&0 : ACPI Power Button
ACPI\PNP0C0D\2&DABA3FF&0 : ACPI Lid
ACPI\PNP0C0E\2&DABA3FF&0 : ACPI Sleep Button
ACPI\PNP0C14\0 : Microsoft Windows Management Interface for ACPI
ACPI\PNP0F13\4&DCE5D5B&0 : PS/2 Compatible Mouse
ACPI\THERMALZONE\THM_ : ACPI Thermal Zone
ACPI_HAL\PNP0C08\0 : Microsoft ACPI-Compliant System
ROOT\ACPI_HAL\0000 : ACPI Multiprocessor PC
28 matching device(s) found.
============
HDA Audio
============
HDAUDIO\FUNC_01&VEN_111D&DEV_76B2&SUBSYS_10280233&REV_1003\4&380800DF&0&0001: IDT High Definition Audio CODEC
HDAUDIO\FUNC_01&VEN_8086&DEV_2802&SUBSYS_80860101&REV_1000\4&380800DF&0&0201: Intel(R) High Definition Audio HDMI Service
2 matching device(s) found.
============
RAID Devices
============
PCI\VEN_8086&DEV_2929&SUBSYS_02331028&REV_03\3&61AAA01&0&FA
Name: PCI Device
Hardware ID's:
PCI\VEN_8086&DEV_2929&SUBSYS_02331028&REV_03
PCI\VEN_8086&DEV_2929&SUBSYS_02331028
PCI\VEN_8086&DEV_2929&CC_010601
PCI\VEN_8086&DEV_2929&CC_0106
Compatible ID's:
PCI\VEN_8086&DEV_2929&REV_03
PCI\VEN_8086&DEV_2929
PCI\VEN_8086&CC_010601
PCI\VEN_8086&CC_0106
PCI\VEN_8086
PCI\CC_010601
PCI\CC_0106
1 matching device(s) found.
Download URL from Dell.com for the suitable driver I used:
http://www.dell.com/support/drivers/us/ … 2939841948
When this is unpacked it contains the following files:
F6Readme.txt
iaAHCI.cat
iaAHCI.inf
iaStor.cat
iaStor.inf
iaStor.sys
license.txt
TXTSETUP.OEM
Version.txtWhen I force switched the drivers to AHCI, I unpacked the files above, right clicked on the INF's and selected install. Then in Device manager when selecting the driver from the list I choose:
Intel(R) ICH9M/M-E Family 4 port SATA AHCI Controller - 2929I have no idea if they are "signed" or otherwise suitable for DriverPack inclusion consideration.
This is what I saw in the device properties but I am unsure whether this comes from the hardware or the device driver I installed for the hardware.
PCI\VEN_8086&DEV_2929&SUBSYS_02331028&REV_03\3&61AAA01&0&FAI haven't been able to test the external eSATA port which was the main reason for enabling AHCI (it wont work in ATA), so I still have my fingers crossed.
Please let me know how/if I can help further or you feel I might have not made the correct choices above. I have images of the laptop and am happy to test a new driverpack.
Hopefully this feedback helps.
Best Wishes
MattyUSA
Last edited by MattyUSA (2013-01-30 05:03:39)
PCI\VEN_8086&DEV_2929This drivers HWID is in 12.09, use the latest version, not 11.09.
Last edited by Damnation (2013-01-30 06:24:40)
Opps.
Thanks Damnation. Darn I thought I might have helped. Oh well.
When I run DPs_BASE_1006.exe and use the check for updates on DriverPacks feature it tells me I'm up to date (retested before the post).
That's how I missed the latest version. I'll check manually as well from now on. Much appreciated.
I'll try to figure out where the update DriverPacks feature is going wrong for me.
Thanks again. Sorry for the confusion.
Matt
The update DriverPacks feature isn't going wrong, these two packs are still in the "Release Candidate" stage.
You can still help.
It should install properly in AHCI mode when installing from CD/DVD, after integrating the DP_MassStorage and DP_Chipset packs (see above) using DP_BASE.
WinSetupFromUSB may also work with "DP MS.iso" disabled (in Advanced options).
If neither work for your hardware, first ensure that you have latest BIOS from the Manufacturer updated. Beware that improperly applied BIOS/firmware updates can "brick" your board. Do so only at your own risk.
If that doesn't make a difference, then please post your DP_BASE.log in a new topic.
Last edited by TechDud (2013-01-30 14:36:14)
If we need those registry keys in the txtsetup.oem for this IOHSATA driver to work properly will this require a setupreg.hiv edit?
If we need those registry keys in the txtsetup.oem for this IOHSATA driver to work properly will this require a setupreg.hiv edit?
Yes, if keys are required, then setupreg.hiv is a possibility.
IOHSATA is a scsiport.sys child driver.
Nvgts.sys is another one. This one requires PnpInterface settings.
Compare PnpInterface:
http://forum.driverpacks.net/viewtopic. … 325#p30325
This is textmode boot only.
You have to add settings to hivesys.inf too.
The update DriverPacks feature isn't going wrong, these two packs are still in the "Release Candidate" stage.
Understood. I hadn't noticed that distinction. thank you.
You can still help.
It should install properly in AHCI mode when installing from CD/DVD, after integrating the DP_MassStorage and DP_Chipset packs (see above) using DP_BASE.
WinSetupFromUSB may also work with "DP MS.iso" disabled (in Advanced options).
I haven't used USB setup with XP before so I won't try something new with this laptop at this point. I'm happy to integrate the driver packs, reinstall and report results. I'm sure it'll work fine now I know the drivers are included.
Thanks.
Matt
Powered by PunBB, supported by Informer Technologies, Inc.
Currently installed 3 official extensions. Copyright © 2003–2009 PunBB.
[ Generated in 0.023 seconds, 10 queries executed ]