[ Closed ] [CLOSED] My solution For Si3112r and Ati

zorro · 2006-09-16 07:18:53

zorro
DriverPacks newbie
Offline

Registered: 2006-09-15
Posts: 16

Topic: [CLOSED] My solution For Si3112r and Ati

Sorry for my poor english.

I had already given this solution on the msfn forum. Work fine for me with 'Silicon Image SiI 3112 SATARaid Controller' and 'ATI 4379 Serial ATA Controller'

TXTSETUP.SIF

[SourceDisksFiles]

REM ati3112r.sys = 1,,,,,,4_,4,1,,,1,4

[HardwareIdsDatabase]

change all ATI3112r by si3112r

[SCSI.Load]
REM ati3112r = ati3112r.sys,4

[SCSI]

REM ati3112r = "Silicon Image 3112 SATARaid Controller for ATI chipsets"

DOSNET.INF

REM for all d1,ati3112r.sys

delete ati3112r.sys in I386 directory

that all

muiz · 2006-09-19 02:52:27

muiz
Vista / 7/8 Driverpacks Team
Offline

From: Netherlands
Registered: 2006-07-01
Posts: 1,555

Re: [CLOSED] My solution For Si3112r and Ati

And what if i have systems that dont use the raid version?

http://d1syubgj0w3cyv.cloudfront.net/cdn/farfuture/VVyo3dzRp1allVk-OCdyukcaj701mcdrrsdDOyX2wK8/perpetual:forever/userbar/admin-1.png

DONATE!
HWID's Tool Read BEFORE you post

Wim Leers · 2006-09-19 02:57:31

Wim Leers
aka Bâshrat the Sneaky
Offline

From: Hasselt, Belgium
Registered: 2006-05-26
Posts: 2,609

Re: [CLOSED] My solution For Si3112r and Ati

ati3112r supports all ATI-chipset-specific SiI3112r controllers.

Did you test your workaround on a SiI3112r controller on a ATI chipset based motherboard, zorro?

Founder of DriverPacks.net — wimleers.com

zorro · 2006-09-20 07:26:06

zorro
DriverPacks newbie
Offline

Registered: 2006-09-15
Posts: 16

Re: [CLOSED] My solution For Si3112r and Ati

Yes i have test on motherboard Asus A7N8X-E (SI3112r) and Motherboard Gigabyte wiht ATI chipset since 6 month with success.

I think this solution work wiht other motherboard

Floppy · 2006-09-28 06:28:33

Floppy
DriverPacks Donor!
Offline

Registered: 2006-05-28
Posts: 73

Re: [CLOSED] My solution For Si3112r and Ati

zorro wrote:

Sorry for my poor english.
I had already given this solution on the msfn forum. Work fine for me with 'Silicon Image SiI 3112 SATARaid Controller' and 'ATI 4379 Serial ATA Controller'

TXTSETUP.SIF
[SourceDisksFiles]
REM ati3112r.sys = 1,,,,,,4_,4,1,,,1,4
[HardwareIdsDatabase]
change all ATI3112r by si3112r
[SCSI.Load]
REM ati3112r = ati3112r.sys,4
[SCSI]
REM ati3112r = "Silicon Image 3112 SATARaid Controller for ATI chipsets"

DOSNET.INF
REM for all d1,ati3112r.sys

delete ati3112r.sys in I386 directory

that all

Hey

Iam going to test this out n my Asus A7N8X-E mobo.
A question.... ifa mobo (Diff. from Asus A7N8X-E) needs the ati3112r.sys..what happens.?
Does it grab another driver due to the changes aplyed here?

Floppy · 2006-09-29 03:00:28

Floppy
DriverPacks Donor!
Offline

Registered: 2006-05-28
Posts: 73

Re: [CLOSED] My solution For Si3112r and Ati

@Zorro
BSOD---->0x000007B

Did not work for me.

2006-09-28 15:07:46 : <INIT> DriverPacks BASE 6.08.6 initialized.
2006-09-28 15:07:46 : <INIT> Host environment: WIN_XP Service Pack 2 on X86 CPU.
2006-09-28 15:07:46 : <INIT> Detected settings file "M:\Kopier av  WinXP\Drivere\DPs_BASE\DPs_BASE.ini".
2006-09-28 15:07:46 : <INIT> No OS could be detected.
2006-09-28 15:07:46 : <INIT> Could not verify location set in settings file: it seems to be invalid!
2006-09-28 15:07:46 : <INIT> Imported settings from settings file.
2006-09-28 15:07:46 : <INIT> [Settings]\DPsMethod not specified: default (2) was set.
2006-09-28 15:07:46 : <INIT> [Settings]\finisherMethod not specified: default (GUIRunOnce) was set.
2006-09-28 15:07:46 : <INIT> [OptionalSettings]\KTD not specified: default (none) was set.
2006-09-28 15:07:46 : <INIT> [OptionalSettings]\QSC not specified: default (yes) was set.
2006-09-28 15:07:46 : <INIT> [OptionalSettingsOther]\ATI_cpl not specified: default (CCC) was set.
2006-09-28 15:07:46 : <INIT> Detected DriverPack Chipset 6.09.1!
2006-09-28 15:07:46 : <INIT> Detected DriverPack CPU 6.09.1!
2006-09-28 15:07:46 : <INIT> Detected DriverPack Graphics A 6.09!
2006-09-28 15:07:46 : <INIT> Detected DriverPack Graphics B 6.08!
2006-09-28 15:07:46 : <INIT> Detected DriverPack Graphics C 6.03!
2006-09-28 15:07:46 : <INIT> Detected DriverPack LAN 6.08.1!
2006-09-28 15:07:46 : <INIT> Detected DriverPack MassStorage 6.08!
2006-09-28 15:07:46 : <INIT> Detected DriverPack Sound A 6.08.1!
2006-09-28 15:07:46 : <INIT> Detected DriverPack Sound B 6.08!
2006-09-28 15:07:46 : <INIT> Detected DriverPack WLAN 6.08!
2006-09-28 15:07:46 : <INIT> Detected 3rd party DriverPack(s).
2006-09-28 15:07:46 : <INIT> DriverPacks scanned sucessfully.
2006-09-28 15:07:46 : <GUI>  Initialized GUI.
2006-09-28 15:07:46 : <GUI>  Created a list of all available language files.
2006-09-28 15:07:46 : <WARN> Language file lng\Norwegian.lng invalid: [any_any_any__GUI]\settings_location_06 entry does not exist! The English text will be shown instead! Please contact the translator for this language (Norwegian), Gyppie, in the forum to fix this!
2006-09-28 15:07:49 : <WARN> Language file lng\Norwegian.lng invalid: [any_any_any__GUI]\settings_location_07 entry does not exist! The English text will be shown instead! Please contact the translator for this language (Norwegian), Gyppie, in the forum to fix this!
2006-09-28 15:07:49 : <WARN> Language file lng\Norwegian.lng invalid: [any_any_any__GUI]\about_11 entry does not exist! The English text will be shown instead! Please contact the translator for this language (Norwegian), Gyppie, in the forum to fix this!
2006-09-28 15:07:50 : <GUI>  Set the last used language, Norwegian, as the GUI language.
2006-09-28 15:08:07 : <GUI>  Changed Windows installation files OR export (depending on the installation platform) location to C:\XPCD.
2006-09-28 15:08:07 : <GUI>  Windows XP Professional -  Retail SP2 detected.
2006-09-28 15:08:07 : <GUI>  The platform wnt5_x86-32_disc will be used (which is the 'disc' installation platform for the OS family 'wnt5_x86-32').
2006-09-28 15:08:44 : <GUI>  Refreshed UpdateChecker with success.
2006-09-28 15:08:49 : <GUI>  Saved settings!
2006-09-28 15:08:49 : <GUI>  Closed GUI.
2006-09-28 15:08:49 : <SEL>  Selected module: mod_slip_wxp_x86-32_disc_m2.
2006-09-28 15:08:49 : <PREP> Removed all attributes from \I386.
2006-09-28 15:08:49 : <PREP> Created a backup of \I386\winnt.sif.
2006-09-28 15:08:49 : <PREP> Created a backup of \I386\txtsetup.sif.
2006-09-28 15:08:49 : <PREP> Created a backup of \I386\dosnet.inf.
2006-09-28 15:08:49 : <PREP> Created temporary working directory.
2006-09-28 15:08:50 : <SLIP> Extracted necessary files for method 2.
2006-09-28 15:08:50 : <SLIP> Created necessary directory structure for method 2.
2006-09-28 15:08:50 : <SLIP> Copied files necessary for method 2.
2006-09-28 15:09:01 : <SLIP> Copied DriverPacks to \OEM.
2006-09-28 15:09:01 : <SLIP> Updated \I386\svcpack.inf file to support KB888111 and KB921401.
2006-09-28 15:09:03 : <SLIP> Updated \I386\txtsetup.sif file to support KB888111.
2006-09-28 15:09:04 : <SLIP> Updated \I386\dosnet.inf file to support KB888111.
2006-09-28 15:09:04 : <SLIP> Updated \I386\dosnet.inf file to support KB921401.
2006-09-28 15:09:04 : <SLIP> QuickStream Cache available for DriverPack MassStorage text mode drivers!
2006-09-28 15:09:07 : <SLIP> Slipstreamed DP MassStorage text mode drivers using QuickStream Cache.
2006-09-28 15:09:12 : <SLIP> Removed entries from \I386\txtsetup.sif that will be updated.
2006-09-28 15:09:13 : <SLIP> Removed entries from \I386\dosnet.inf that will be updated.
2006-09-28 15:09:40 : <SLIP> Updated \I386\dosnet.inf and \I386\txtsetup.sif to support DP MassStorage text mode drivers.
2006-09-28 15:09:41 : <SLIP> Compressed setup.exe to SETUP.EX_.
2006-09-28 15:09:41 : <SLIP> Created \I386\presetup.cmd file.
2006-09-28 15:09:41 : <SLIP> Updated \I386\txtsetup.sif to support method 2.
2006-09-28 15:09:41 : <SLIP> Updated \I386\dosnet.inf to support method 2.
2006-09-28 15:09:41 : <SLIP> Updated \I386\winnt.sif to support method 2.
2006-09-28 15:09:41 : <SLIP> Updated DPsFnshr.ini to disable KTD.
2006-09-28 15:09:41 : <SLIP> Updated \I386\winnt.sif's GUIRunOnce section.
2006-09-28 15:09:41 : <SLIP> Slipstream finished in 52 seconds.
2006-09-28 15:09:43 : <CLNP> Temporary working directory successfully deleted.
2006-09-28 15:09:43 : Program terminated.

Floppy · 2006-09-30 10:31:22

Floppy
DriverPacks Donor!
Offline

Registered: 2006-05-28
Posts: 73

Re: [CLOSED] My solution For Si3112r and Ati

Hey

Ok, I may be dead wrong but I have to ask.

Is the problem;
1) combination of SiI 3112 and ATI Display Drivers, instaled on the same mobo.
or
2)The SiI 3112 sata driver, it does not matter what kind of GPU you have.

Because I took out the ATI gpu card, replaced it with a NVIDIA GeForce 6800, and the WinXP DVD instaled just fine.

This was on the PC with Asus A7N8X-E ,that always BSOD'd with 0x000007B.

@Bâshrat the Sneaky
""replace the si3112r.sy_ in your I386 directory "" did not work.
I will never cross post again!!!

Have you seen this;

http://www.msfn.org/board/index.php?s=5986299a8a364e04b43783b8ddc7de33&showtopic=51140&st=15

Last edited by Floppy (2006-09-30 22:09:11)

Wim Leers · 2006-09-30 22:19:40

Wim Leers
aka Bâshrat the Sneaky
Offline

From: Hasselt, Belgium
Registered: 2006-05-26
Posts: 2,609

Re: [CLOSED] My solution For Si3112r and Ati

Floppy, I don't see what that topic has to do with this issue?

Founder of DriverPacks.net — wimleers.com

Floppy · 2006-09-30 22:24:37

Floppy
DriverPacks Donor!
Offline

Registered: 2006-05-28
Posts: 73

Re: [CLOSED] My solution For Si3112r and Ati

ok....
Iam just bit frustrated that I can't make a cd that instals on all of my 5 PC's...
Do you have a answer to (1) and (2) in my previous post?

Wim Leers · 2006-09-30 22:57:25

Wim Leers
aka Bâshrat the Sneaky
Offline

From: Hasselt, Belgium
Registered: 2006-05-26
Posts: 2,609

Re: [CLOSED] My solution For Si3112r and Ati

I don't have an answer to that, as I cannot test all those combinations myself. I'm sorry.

And it's really Silicon Image you should blame, not me. The Silicon Image drivers have always worked just fine, until recently. Because no one has succeeded in finding a true solution, I will probably revert to the older drivers.

Founder of DriverPacks.net — wimleers.com

Floppy · 2006-09-30 23:05:55

Floppy
DriverPacks Donor!
Offline

Registered: 2006-05-28
Posts: 73

Re: [CLOSED] My solution For Si3112r and Ati

BÃ¢shrat the Sneaky wrote:

And it's really Silicon Image you should blame, not me.

I do not blame you!!

I have to ask someone, and you are The Man

Wim Leers · 2006-09-30 23:17:25

Wim Leers
aka Bâshrat the Sneaky
Offline

From: Hasselt, Belgium
Registered: 2006-05-26
Posts: 2,609

Re: [CLOSED] My solution For Si3112r and Ati

Floppy wrote:

BÃ¢shrat the Sneaky wrote:
And it's really Silicon Image you should blame, not me.
I do not blame you!!
I have to ask someone, and you are The Man

I just wanted to explain that clearly

and... whehehe

Founder of DriverPacks.net — wimleers.com

Floppy · 2006-10-02 01:57:27

Floppy
DriverPacks Donor!
Offline

Registered: 2006-05-28
Posts: 73

Re: [CLOSED] My solution For Si3112r and Ati

Hey

Has anything changed regarding the Silicon Image"problem, withe the relase of DPs_BASE_6.09?

muiz · 2006-10-03 04:47:47

muiz
Vista / 7/8 Driverpacks Team
Offline

From: Netherlands
Registered: 2006-07-01
Posts: 1,555

Re: [CLOSED] My solution For Si3112r and Ati

Does this method work? Bashrat can you confirm this?
And what if you dont have a ATI chipset ?

Last edited by muiz3 (2006-10-03 04:49:51)

DONATE!
HWID's Tool Read BEFORE you post

Wim Leers · 2006-10-03 05:50:25

Wim Leers
aka Bâshrat the Sneaky
Offline

From: Hasselt, Belgium
Registered: 2006-05-26
Posts: 2,609

Re: [CLOSED] My solution For Si3112r and Ati

I'm afraid not, Floppy.

And muiz, as you can see, it did at least not work for one other person: Floppy. So no, this is no workaround.

Founder of DriverPacks.net — wimleers.com

Floppy · 2006-10-03 08:03:53

Floppy
DriverPacks Donor!
Offline

Registered: 2006-05-28
Posts: 73

Re: [CLOSED] My solution For Si3112r and Ati

So we still need to flip the Floppy(:)) (F6)

Wim Leers · 2006-10-03 08:12:02

Wim Leers
aka Bâshrat the Sneaky
Offline

From: Hasselt, Belgium
Registered: 2006-05-26
Posts: 2,609

Re: [CLOSED] My solution For Si3112r and Ati

Floppy wrote:

So we still need to flip the Floppy(:)) (F6)

haha

Founder of DriverPacks.net — wimleers.com

Floppy · 2006-10-03 08:53:36

Floppy
DriverPacks Donor!
Offline

Registered: 2006-05-28
Posts: 73

Re: [CLOSED] My solution For Si3112r and Ati

Believed you would like that one....

The "Silicon Image" thing will be your "old faithful" for a while.....;)

Jaak · 2007-01-04 09:57:24

Jaak
Old Timer Rookie
Offline

From: Eeklo, in the East Flanders
Registered: 2006-07-23
Posts: 3,594

Re: [CLOSED] My solution For Si3112r and Ati

yes, old faithful triggered a BSOD on me on a live test today.
base6.12, with mass 6.08 was tried on a machine that has sil 3132 and a jmicron inside.
And it failed.

funny thing is, when I used the slipstreamed disc I made in september (base 6.086 with mass 6.08 and chipset 6.091), that this installed just fine. The silicon raid tool showed in CP..

I had better pull the drive, and get the setup error log off it.. and maybe see what triggered it.

I'll test the mass 6.11 beta in there after that.

The answer was 42?
Kind regards, Jaak.

Wim Leers · 2007-01-09 03:24:22

Wim Leers
aka Bâshrat the Sneaky
Offline

From: Hasselt, Belgium
Registered: 2006-05-26
Posts: 2,609

Re: [CLOSED] My solution For Si3112r and Ati

Cause was tracked by muiz & ruudboek!

Topic closed.

Founder of DriverPacks.net — wimleers.com

[ Closed ] [CLOSED] My solution For Si3112r and Ati

Posts [ 20 ]

1 Topic by zorro 2006-09-16 07:18:53

Topic: [CLOSED] My solution For Si3112r and Ati

2 Reply by muiz 2006-09-19 02:52:27

Re: [CLOSED] My solution For Si3112r and Ati

3 Reply by Wim Leers 2006-09-19 02:57:31

Re: [CLOSED] My solution For Si3112r and Ati

4 Reply by zorro 2006-09-20 07:26:06

Re: [CLOSED] My solution For Si3112r and Ati

5 Reply by Floppy 2006-09-28 06:28:33

Re: [CLOSED] My solution For Si3112r and Ati

6 Reply by Floppy 2006-09-29 03:00:28

Re: [CLOSED] My solution For Si3112r and Ati

7 Reply by Floppy 2006-09-30 10:31:22

Re: [CLOSED] My solution For Si3112r and Ati

8 Reply by Wim Leers 2006-09-30 22:19:40

Re: [CLOSED] My solution For Si3112r and Ati

9 Reply by Floppy 2006-09-30 22:24:37

Re: [CLOSED] My solution For Si3112r and Ati

10 Reply by Wim Leers 2006-09-30 22:57:25

Re: [CLOSED] My solution For Si3112r and Ati

11 Reply by Floppy 2006-09-30 23:05:55

Re: [CLOSED] My solution For Si3112r and Ati

12 Reply by Wim Leers 2006-09-30 23:17:25

Re: [CLOSED] My solution For Si3112r and Ati

13 Reply by Floppy 2006-10-02 01:57:27

Re: [CLOSED] My solution For Si3112r and Ati

14 Reply by muiz 2006-10-03 04:47:47

Re: [CLOSED] My solution For Si3112r and Ati

15 Reply by Wim Leers 2006-10-03 05:50:25

Re: [CLOSED] My solution For Si3112r and Ati

16 Reply by Floppy 2006-10-03 08:03:53

Re: [CLOSED] My solution For Si3112r and Ati

17 Reply by Wim Leers 2006-10-03 08:12:02

Re: [CLOSED] My solution For Si3112r and Ati

18 Reply by Floppy 2006-10-03 08:53:36

Re: [CLOSED] My solution For Si3112r and Ati

19 Reply by Jaak 2007-01-04 09:57:24

Re: [CLOSED] My solution For Si3112r and Ati

20 Reply by Wim Leers 2007-01-09 03:24:22

Re: [CLOSED] My solution For Si3112r and Ati

Posts [ 20 ]