looking for Dell Cerc SATA 2s Driver

jharl · 2011-03-13 14:08:42

jharl
DriverPacks newbie
Offline

Registered: 2011-03-13
Posts: 5

Topic: looking for Dell Cerc SATA 2s Driver

I am in the misted of setting up my new to me Dell Poweredge 1800, with CERC SATA 2S and a Perc 5/1. I have an image on a single disk on the CERC SATA 2s and want to move it to the 5/i mirrored disk set and boot from that.

I am using ubcd4win to boot with, and that have latest drives pack base 10.06 and updated lan, mass storage and wlan. My problem is that I can see the Perc 5/i but cannot see the the Cerc SATA 2s.

What gives

mr_smartepants · 2011-03-13 18:24:38

mr_smartepants
Administrator & DriverPacks Developer
Offline

From: Cambridgeshire, UK
Registered: 2007-01-27
Posts: 6,226

Re: looking for Dell Cerc SATA 2s Driver

http://forum.driverpacks.net/viewtopic.php?pid=4

Wim Leers wrote:

ALWAYS include in your post
- DPs_BASE.ini (from the same directory as DPs_BASE.exe)
- DPs_BASE.log (from the same directory as DPs_BASE.exe)
* For Base versions 8.9x or higher only the DPs_BASE.log is needed.
** For Base versions 9.x or newer the Log files are archived in the \LogFiles\ folder of BASE.
This way you can find a Log for any previous slipstream or run of the program.
(In case you accidentally overwrote the current log in the BASE folder)
IF RELEVANT, include in your post
- %SystemRoot%\DPsFnshr.log (to help us determine DriverPacks Finisher specific errors)
- %SystemRoot%\setupapi.log (to help us determine why a specific driver failed)
- HWID's (Hardware Identification numbers) are almost always helpful.
HWID's Tool
6. Tell us what you did - Could we try to reproduce your issue ourselves just based on your first post?

Read BEFORE you post. HWID tool DriverPacks Tutorial DONATE!

http://driverpacks.net/userbar/admin-1.png

Not all heroes wear capes, some wear Kevlar!

jharl · 2011-03-13 23:43:39

jharl
DriverPacks newbie
Offline

Registered: 2011-03-13
Posts: 5

Re: looking for Dell Cerc SATA 2s Driver

INI Section

[General]
; preferred language
prefLang	= "English"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons	= "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI		= "yes"


[Settings]
; disc/bartpe/multibootDisc
instPlatform	= "bartpe"
; trailing backslash is allowed, but not necessary
location	= "C:\UBCD4Win\plugin"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks	= "select"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod	= ""
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod	= ""


; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD		= ""
; <path>, to specify a custom KTD cache location, if not specified: default (%SystemRoot%\DriverPacks)
KTDlocation	= ""
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC		= "no"


; you should only add this section if you've set [Settings]\DriverPacks to "select"
[SelectDriverPacks]
DP_Chipset	= "no"
DP_CPU		= "no"
DP_LAN		= "yes"
DP_MassStorage	= "no"
DP_WLAN		= "yes"
DPs_3rd_party	= "no"
DP_MassStorage_textmode = "yes"
////////////////////////////////////////////////////////////////////////////////////////////////////////////////

DpS_LOGBASE SECTION

2011-03-12 21:22:05 : <INIT> DriverPacks BASE 10.06 initialized.
2011-03-12 21:22:05 : <INIT> Host environment: WIN_XP Service Pack 3 X86 on a X64 CPU.
2011-03-12 21:22:05 : <INIT> Created temporary working directory.
2011-03-12 21:22:05 : <INIT> Imported proxy settings from Internet Explorer.
2011-03-12 21:22:05 : <INIT> Start scanning for DriverPacks for the wnt5_x86-32 platform.
2011-03-12 21:22:05 : <INIT> 	Detected DriverPack Chipset 1002!
2011-03-12 21:22:05 : <INIT> 	Detected DriverPack CPU 912!
2011-03-12 21:22:05 : <INIT> 	Detected DriverPack LAN 1003!
2011-03-12 21:22:05 : <INIT> 	Detected DriverPack LAN 10051!
2011-03-12 21:22:05 : <INIT> 	Detected DriverPack LAN 1007!
2011-03-12 21:22:05 : <INIT> 	Detected DriverPack LAN 10111!
2011-03-12 21:22:05 : <INIT> 	Detected DriverPack LAN 1101!
2011-03-12 21:22:05 : <INIT> 	Detected DriverPack Mass Storage 1011!
2011-03-12 21:22:05 : <INIT> 	Detected DriverPack Mass Storage 1101!
2011-03-12 21:22:05 : <INIT> 	Detected DriverPack Mass Storage 901!
2011-03-12 21:22:05 : <INIT> 	Detected DriverPack WLAN 1003!
2011-03-12 21:22:05 : <INIT> 	Detected DriverPack WLAN 10051!
2011-03-12 21:22:05 : <INIT> 	Detected DriverPack WLAN 1007!
2011-03-12 21:22:05 : <INIT> 	Detected DriverPack WLAN 1009!
2011-03-12 21:22:05 : <INIT> 	Detected DriverPack WLAN 1101!
2011-03-12 21:22:05 : <INIT> 	Detected 3rd Party DriverPack myDriverPack jack12-!
2011-03-12 21:22:05 : <INIT> 	Finished scanning.
2011-03-12 21:22:05 : <INIT> Detected settings file "C:\UBCD4Win\plugin\DriverPacks.net\BASE\DPs_BASE.ini".
2011-03-12 21:22:05 : <INIT> wnt5_x86-32_bartpe is the selected installation platform .
2011-03-12 21:22:05 : <INIT> Imported settings from settings file.
2011-03-12 21:22:05 : <INIT> [OptionalSettings]\QSC BartPE default (no)    was set.
2011-03-12 21:22:05 : <GUI>  Initialized GUI.
2011-03-12 21:22:05 : <GUI>  Created a list of all available language files.
2011-03-12 21:22:05 : <GUI>  Set the last used language, English, as the GUI language.
2011-03-12 21:22:13 : <GUI>  Refreshed UpdateChecker with success.
2011-03-12 21:22:40 : <WARN> DP_CPU_wnt5_x86-32_1005.7z is currently unavailable
2011-03-12 21:22:41 : <WARN> DP_Chipset_wnt5_x86-32_1101.7z is currently unavailable
2011-03-12 21:22:42 : <GUI>  Start scanning for DriverPacks for the wnt5_x86-32 platform.
2011-03-12 21:22:42 : <GUI>  	Detected DriverPack Chipset 1002!
2011-03-12 21:22:42 : <GUI>  	Detected DriverPack CPU 912!
2011-03-12 21:22:42 : <GUI>  	Detected DriverPack LAN 1003!
2011-03-12 21:22:42 : <GUI>  	Detected DriverPack LAN 10051!
2011-03-12 21:22:42 : <GUI>  	Detected DriverPack LAN 1007!
2011-03-12 21:22:42 : <GUI>  	Detected DriverPack LAN 10111!
2011-03-12 21:22:42 : <GUI>  	Detected DriverPack LAN 1101!
2011-03-12 21:22:42 : <GUI>  	Detected DriverPack Mass Storage 1011!
2011-03-12 21:22:42 : <GUI>  	Detected DriverPack Mass Storage 1101!
2011-03-12 21:22:42 : <GUI>  	Detected DriverPack Mass Storage 901!
2011-03-12 21:22:42 : <GUI>  	Detected DriverPack WLAN 1003!
2011-03-12 21:22:42 : <GUI>  	Detected DriverPack WLAN 10051!
2011-03-12 21:22:42 : <GUI>  	Detected DriverPack WLAN 1007!
2011-03-12 21:22:42 : <GUI>  	Detected DriverPack WLAN 1009!
2011-03-12 21:22:42 : <GUI>  	Detected DriverPack WLAN 1101!
2011-03-12 21:22:42 : <GUI>  	Detected 3rd Party DriverPack myDriverPack jack12-!
2011-03-12 21:22:42 : <GUI>  	Finished scanning.
2011-03-12 21:22:51 : <GUI>  Refreshed UpdateChecker with success.
2011-03-13 07:56:28 : <GUI>  Closed GUI.
2011-03-13 07:56:28 : <GUI>  Saved settings!
2011-03-13 07:56:29 : <CLNP> Temporary working directory successfully deleted.
- = DriverPacks BASE ini settings used = -
[General]
; preferred language
prefLang	= "English"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons	= "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI		= "yes"


[Settings]
; disc/bartpe/multibootDisc
instPlatform	= "bartpe"
; trailing backslash is allowed, but not necessary
location	= "C:\UBCD4Win\plugin"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks	= "select"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod	= ""
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod	= ""


; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD		= ""
; <path>, to specify a custom KTD cache location, if not specified: default (%SystemRoot%\DriverPacks)
KTDlocation	= ""
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC		= "no"


; you should only add this section if you've set [Settings]\DriverPacks to "select"
[SelectDriverPacks]
DP_Chipset	= "no"
DP_CPU		= "no"
DP_LAN		= "yes"
DP_MassStorage	= "no"
DP_WLAN		= "yes"
DPs_3rd_party	= "no"
DP_MassStorage_textmode = "yes"
2011-03-13 07:56:29 : <CLNP> Create a DPs_Base.log backup @ C:\UBCD4Win\plugin\DriverPacks.net\BASE\LogFiles\DPs_BASE_11-03-13_07-56.log
2011-03-13 07:56:29 : <CLNP> Program terminated.

\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
Log in the root called DPs_BASE.log

2011-03-12 21:22:05 : <INIT> DriverPacks BASE 10.06 initialized.
2011-03-12 21:22:05 : <INIT> Host environment: WIN_XP Service Pack 3 X86 on a X64 CPU.
2011-03-12 21:22:05 : <INIT> Created temporary working directory.
2011-03-12 21:22:05 : <INIT> Imported proxy settings from Internet Explorer.
2011-03-12 21:22:05 : <INIT> Start scanning for DriverPacks for the wnt5_x86-32 platform.
2011-03-12 21:22:05 : <INIT> 	Detected DriverPack Chipset 1002!
2011-03-12 21:22:05 : <INIT> 	Detected DriverPack CPU 912!
2011-03-12 21:22:05 : <INIT> 	Detected DriverPack LAN 1003!
2011-03-12 21:22:05 : <INIT> 	Detected DriverPack LAN 10051!
2011-03-12 21:22:05 : <INIT> 	Detected DriverPack LAN 1007!
2011-03-12 21:22:05 : <INIT> 	Detected DriverPack LAN 10111!
2011-03-12 21:22:05 : <INIT> 	Detected DriverPack LAN 1101!
2011-03-12 21:22:05 : <INIT> 	Detected DriverPack Mass Storage 1011!
2011-03-12 21:22:05 : <INIT> 	Detected DriverPack Mass Storage 1101!
2011-03-12 21:22:05 : <INIT> 	Detected DriverPack Mass Storage 901!
2011-03-12 21:22:05 : <INIT> 	Detected DriverPack WLAN 1003!
2011-03-12 21:22:05 : <INIT> 	Detected DriverPack WLAN 10051!
2011-03-12 21:22:05 : <INIT> 	Detected DriverPack WLAN 1007!
2011-03-12 21:22:05 : <INIT> 	Detected DriverPack WLAN 1009!
2011-03-12 21:22:05 : <INIT> 	Detected DriverPack WLAN 1101!
2011-03-12 21:22:05 : <INIT> 	Detected 3rd Party DriverPack myDriverPack jack12-!
2011-03-12 21:22:05 : <INIT> 	Finished scanning.
2011-03-12 21:22:05 : <INIT> Detected settings file "C:\UBCD4Win\plugin\DriverPacks.net\BASE\DPs_BASE.ini".
2011-03-12 21:22:05 : <INIT> wnt5_x86-32_bartpe is the selected installation platform .
2011-03-12 21:22:05 : <INIT> Imported settings from settings file.
2011-03-12 21:22:05 : <INIT> [OptionalSettings]\QSC BartPE default (no)    was set.
2011-03-12 21:22:05 : <GUI>  Initialized GUI.
2011-03-12 21:22:05 : <GUI>  Created a list of all available language files.
2011-03-12 21:22:05 : <GUI>  Set the last used language, English, as the GUI language.
2011-03-12 21:22:13 : <GUI>  Refreshed UpdateChecker with success.
2011-03-12 21:22:40 : <WARN> DP_CPU_wnt5_x86-32_1005.7z is currently unavailable
2011-03-12 21:22:41 : <WARN> DP_Chipset_wnt5_x86-32_1101.7z is currently unavailable
2011-03-12 21:22:42 : <GUI>  Start scanning for DriverPacks for the wnt5_x86-32 platform.
2011-03-12 21:22:42 : <GUI>  	Detected DriverPack Chipset 1002!
2011-03-12 21:22:42 : <GUI>  	Detected DriverPack CPU 912!
2011-03-12 21:22:42 : <GUI>  	Detected DriverPack LAN 1003!
2011-03-12 21:22:42 : <GUI>  	Detected DriverPack LAN 10051!
2011-03-12 21:22:42 : <GUI>  	Detected DriverPack LAN 1007!
2011-03-12 21:22:42 : <GUI>  	Detected DriverPack LAN 10111!
2011-03-12 21:22:42 : <GUI>  	Detected DriverPack LAN 1101!
2011-03-12 21:22:42 : <GUI>  	Detected DriverPack Mass Storage 1011!
2011-03-12 21:22:42 : <GUI>  	Detected DriverPack Mass Storage 1101!
2011-03-12 21:22:42 : <GUI>  	Detected DriverPack Mass Storage 901!
2011-03-12 21:22:42 : <GUI>  	Detected DriverPack WLAN 1003!
2011-03-12 21:22:42 : <GUI>  	Detected DriverPack WLAN 10051!
2011-03-12 21:22:42 : <GUI>  	Detected DriverPack WLAN 1007!
2011-03-12 21:22:42 : <GUI>  	Detected DriverPack WLAN 1009!
2011-03-12 21:22:42 : <GUI>  	Detected DriverPack WLAN 1101!
2011-03-12 21:22:42 : <GUI>  	Detected 3rd Party DriverPack myDriverPack jack12-!
2011-03-12 21:22:42 : <GUI>  	Finished scanning.
2011-03-12 21:22:51 : <GUI>  Refreshed UpdateChecker with success.
2011-03-13 07:56:28 : <GUI>  Closed GUI.
2011-03-13 07:56:28 : <GUI>  Saved settings!
2011-03-13 07:56:29 : <CLNP> Temporary working directory successfully deleted.
- = DriverPacks BASE ini settings used = -
[General]
; preferred language
prefLang	= "English"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons	= "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI		= "yes"


[Settings]
; disc/bartpe/multibootDisc
instPlatform	= "bartpe"
; trailing backslash is allowed, but not necessary
location	= "C:\UBCD4Win\plugin"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks	= "select"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod	= ""
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod	= ""


; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD		= ""
; <path>, to specify a custom KTD cache location, if not specified: default (%SystemRoot%\DriverPacks)
KTDlocation	= ""
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC		= "no"


; you should only add this section if you've set [Settings]\DriverPacks to "select"
[SelectDriverPacks]
DP_Chipset	= "no"
DP_CPU		= "no"
DP_LAN		= "yes"
DP_MassStorage	= "no"
DP_WLAN		= "yes"
DPs_3rd_party	= "no"
DP_MassStorage_textmode = "yes"
2011-03-13 07:56:29 : <CLNP> Create a DPs_Base.log backup @ C:\UBCD4Win\plugin\DriverPacks.net\BASE\LogFiles\DPs_BASE_11-03-13_07-56.log
2011-03-13 07:56:29 : <CLNP> Program terminated.

mr_smartepants · 2011-03-14 00:04:49

mr_smartepants
Administrator & DriverPacks Developer
Offline

From: Cambridgeshire, UK
Registered: 2007-01-27
Posts: 6,226

Re: looking for Dell Cerc SATA 2s Driver

...and HWIDs?

Read BEFORE you post. HWID tool DriverPacks Tutorial DONATE!

Not all heroes wear capes, some wear Kevlar!

jharl · 2011-03-14 04:37:11

jharl
DriverPacks newbie
Offline

Registered: 2011-03-13
Posts: 5

Re: looking for Dell Cerc SATA 2s Driver

Thanks

===========
PCI Devices
===========
PCI\VEN_10DE&DEV_01D3&SUBSYS_344F1458&REV_A1\4&FA8D773&0&0008: NVIDIA GeForce 7300 SE/7200 GS
PCI\VEN_1102&DEV_0002&SUBSYS_80221102&REV_07\4&1B02CB0B&0&10F0: Creative SB Live! Value (WDM)
PCI\VEN_1102&DEV_7002&SUBSYS_00201102&REV_07\4&1B02CB0B&0&11F0: Creative Game Port
PCI\VEN_14E4&DEV_167A&SUBSYS_01DA1028&REV_02\4&21E4E6E0&0&00E4: Broadcom NetXtreme 57xx Gigabit Controller
PCI\VEN_8086&DEV_244E&SUBSYS_00000000&REV_F2\3&172E68DD&0&F0: Intel(R) 82801 PCI Bridge - 244E
PCI\VEN_8086&DEV_2810&SUBSYS_00000000&REV_02\3&172E68DD&0&F8: Intel(R) ICH8/ICH8R Family LPC Interface Controller - 2810
PCI\VEN_8086&DEV_2820&SUBSYS_01DA1028&REV_02\3&172E68DD&0&FA: Intel(R) ICH8 4 port Serial ATA Storage Controller - 2820
PCI\VEN_8086&DEV_2825&SUBSYS_01DA1028&REV_02\3&172E68DD&0&FD: Intel(R) ICH8 2 port Serial ATA Storage Controller - 2825
PCI\VEN_8086&DEV_2830&SUBSYS_01DA1028&REV_02\3&172E68DD&0&E8: Intel(R) ICH8 Family USB Universal Host Controller - 2830
PCI\VEN_8086&DEV_2831&SUBSYS_01DA1028&REV_02\3&172E68DD&0&E9: Intel(R) ICH8 Family USB Universal Host Controller - 2831
PCI\VEN_8086&DEV_2832&SUBSYS_01DA1028&REV_02\3&172E68DD&0&EA: Intel(R) ICH8 Family USB Universal Host Controller - 2832
PCI\VEN_8086&DEV_2834&SUBSYS_01DA1028&REV_02\3&172E68DD&0&D0: Intel(R) ICH8 Family USB Universal Host Controller - 2834
PCI\VEN_8086&DEV_2835&SUBSYS_01DA1028&REV_02\3&172E68DD&0&D1: Intel(R) ICH8 Family USB Universal Host Controller - 2835
PCI\VEN_8086&DEV_2836&SUBSYS_01DA1028&REV_02\3&172E68DD&0&EF: Intel(R) ICH8 Family USB2 Enhanced Host Controller - 2836
PCI\VEN_8086&DEV_283A&SUBSYS_01DA1028&REV_02\3&172E68DD&0&D7: Intel(R) ICH8 Family USB2 Enhanced Host Controller - 283A
PCI\VEN_8086&DEV_283E&SUBSYS_01DA1028&REV_02\3&172E68DD&0&FB: Intel(R) ICH8 Family SMBus Controller - 283E
PCI\VEN_8086&DEV_283F&SUBSYS_00000000&REV_02\3&172E68DD&0&E0: Intel(R) ICH8 Family PCI Express Root Port 1 - 283F
PCI\VEN_8086&DEV_2847&SUBSYS_00000000&REV_02\3&172E68DD&0&E4: Intel(R) ICH8 Family PCI Express Root Port 5 - 2847
PCI\VEN_8086&DEV_2990&SUBSYS_00000000&REV_02\3&172E68DD&0&00: Intel(R) Q963/Q965 Processor to I/O Controller - 2990
PCI\VEN_8086&DEV_2991&SUBSYS_00000000&REV_02\3&172E68DD&0&08: Intel(R) Q963/Q965 PCI Express Root Port - 2991
20 matching device(s) found.

===========
USB Devices
===========
USB\ROOT_HUB\4&1B8E453E&0 : USB Root Hub
USB\ROOT_HUB\4&2C6BE34E&0 : USB Root Hub
USB\ROOT_HUB\4&3828BED4&0 : USB Root Hub
USB\ROOT_HUB\4&61EFCCB&0 : USB Root Hub
USB\ROOT_HUB\4&64061BA&0 : USB Root Hub
USB\ROOT_HUB20\4&10671E48&0 : USB Root Hub
USB\ROOT_HUB20\4&6BA2591&0 : USB Root Hub
USB\VID_045E&PID_076C\5&EA588C7&0&1 : USB Human Interface Device
USB\VID_046D&PID_08B2\5&18E0A94F&0&1 : Logitech USB Camera (Pro 4000)
USB\VID_046D&PID_08B2&MI_00\6&1C65287F&0&0000 : Logitech QuickCam Pro 4000 #2
USB\VID_046D&PID_08B2&MI_01\6&1C65287F&0&0001 : Logitech Microphone (Pro 4000)
USB\VID_051D&PID_0002\AS0649233478 : American Power Conversion USB UPS
USB\VID_0BC2&PID_3000\____________6QF0Q6VS : USB Mass Storage Device
USB\VID_413C&PID_2105\5&EA588C7&0&2 : USB Human Interface Device
USBSTOR\DISK&VEN_SEAGATE&PROD_FREEAGENTDESKTOP&REV_100D\____________6QF0Q6VS&0: Seagate FreeAgentDesktop USB Device
15 matching device(s) found.

=============
Input Devices
=============
HID\VID_045E&PID_076C&COL01\6&18195374&0&0000 : HID-compliant consumer control device
HID\VID_045E&PID_076C&COL02\6&18195374&0&0001 : HID-compliant mouse
HID\VID_051D&PID_0002\6&4D7E848&0&0000 : APC UPS
HID\VID_413C&PID_2105\6&2CEC96C1&0&0000 : HID Keyboard Device
4 matching device(s) found.

============
ACPI Devices
============
ACPI\FIXEDBUTTON\2&DABA3FF&0 : ACPI Fixed Feature Button
ACPI\GENUINEINTEL_-_X86_FAMILY_6_MODEL_15\_0 : Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz
ACPI\GENUINEINTEL_-_X86_FAMILY_6_MODEL_15\_1 : Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz
ACPI\PNP0000\4&25EBAC29&0 : Programmable interrupt controller
ACPI\PNP0100\4&25EBAC29&0 : System timer
ACPI\PNP0103\2&DABA3FF&0 : High Precision Event Timer
ACPI\PNP0200\4&25EBAC29&0 : Direct memory access controller
ACPI\PNP0401\4&25EBAC29&0 : ECP Printer Port (LPT1)
ACPI\PNP0501\1 : Communications Port (COM1)
ACPI\PNP0800\4&25EBAC29&0 : System speaker
ACPI\PNP0A03\4 : PCI bus
ACPI\PNP0B00\4&25EBAC29&0 : System CMOS/real time clock
ACPI\PNP0C01\1 : System board
ACPI\PNP0C01\B : System board
ACPI\PNP0C02\17 : Motherboard resources
ACPI\PNP0C04\4&25EBAC29&0 : Numeric data processor
ACPI\PNP0C0C\2&DABA3FF&0 : ACPI Power Button
ACPI_HAL\PNP0C08\0 : Microsoft ACPI-Compliant System
ROOT\ACPI_HAL\0000 : ACPI Multiprocessor PC
19 matching device(s) found.

============
HDA Audio
============
No matching devices found.

============
RAID Devices
============
PCI\VEN_8086&DEV_2820&SUBSYS_01DA1028&REV_02\3&172E68DD&0&FA
Name: Intel(R) ICH8 4 port Serial ATA Storage Controller - 2820
Hardware ID's:
PCI\VEN_8086&DEV_2820&SUBSYS_01DA1028&REV_02
PCI\VEN_8086&DEV_2820&SUBSYS_01DA1028
PCI\VEN_8086&DEV_2820&CC_01018F
PCI\VEN_8086&DEV_2820&CC_0101
Compatible ID's:
PCI\VEN_8086&DEV_2820&REV_02
PCI\VEN_8086&DEV_2820
PCI\VEN_8086&CC_01018F
PCI\VEN_8086&CC_0101
PCI\VEN_8086
PCI\CC_01018F
PCI\CC_0101
PCI\VEN_8086&DEV_2825&SUBSYS_01DA1028&REV_02\3&172E68DD&0&FD
Name: Intel(R) ICH8 2 port Serial ATA Storage Controller - 2825
Hardware ID's:
PCI\VEN_8086&DEV_2825&SUBSYS_01DA1028&REV_02
PCI\VEN_8086&DEV_2825&SUBSYS_01DA1028
PCI\VEN_8086&DEV_2825&CC_010185
PCI\VEN_8086&DEV_2825&CC_0101
Compatible ID's:
PCI\VEN_8086&DEV_2825&REV_02
PCI\VEN_8086&DEV_2825
PCI\VEN_8086&CC_010185
PCI\VEN_8086&CC_0101
PCI\VEN_8086
PCI\CC_010185
PCI\CC_0101
2 matching device(s) found.

mr_smartepants · 2011-03-14 08:53:35

mr_smartepants
Administrator & DriverPacks Developer
Offline

From: Cambridgeshire, UK
Registered: 2007-01-27
Posts: 6,226

Re: looking for Dell Cerc SATA 2s Driver

The Dell cerc sata 2s is an Adaptec card. Your hwids don't list any Adaptec hardware. Are you sure you have that card installed?
If so, then un-zip the dpms, and edit the .ini file.
Change this:

; [D2]
; ms_count=1
; ms_1_deviceName="Dell/Adaptec CERC SATA 2S (W2K/W2K3)"
; ms_1_tag="aarich"
; ms_1_sysFile="aarich.sys"
; ms_1_hwids="PCI\VEN_8086&DEV_24DF,PCI\VEN_8086&DEV_25B0,PCI\VEN_8086&DEV_2652&SUBSYS_01801028,PCI\VEN_8086&DEV_2652&SUBSYS_01851028"
; ms_1_isBusExtender=false
; ms_1_exc_skipIfOS="wxp"
; ms_1_exc_disableIfOS="w2k"

Into this (remove all ';' and one line):

[D2]
ms_count=1
ms_1_deviceName="Dell/Adaptec CERC SATA 2S (W2K/W2K3)"
ms_1_tag="aarich"
ms_1_sysFile="aarich.sys"
ms_1_hwids="PCI\VEN_8086&DEV_24DF,PCI\VEN_8086&DEV_25B0,PCI\VEN_8086&DEV_2652&SUBSYS_01801028,PCI\VEN_8086&DEV_2652&SUBSYS_01851028"
ms_1_isBusExtender=false
ms_1_exc_disableIfOS="w2k"

Those drivers are only supported by 2003 server. Dell doesn't provide any XP drivers. So this MAY not work.

Read BEFORE you post. HWID tool DriverPacks Tutorial DONATE!

Not all heroes wear capes, some wear Kevlar!

jharl · 2011-03-14 14:02:51

jharl
DriverPacks newbie
Offline

Registered: 2011-03-13
Posts: 5

Re: looking for Dell Cerc SATA 2s Driver

ok I willl try it, I am using xp to run the ubcd4win image creation, then I copy to a usb stick and move to the dell server where that card id installed (emedded in th MB). I am trying to copy one disk to the other.

OverFlow · 2011-03-14 15:19:05

OverFlow
DriverPacks Administrator & BASE Developer
Offline

From: Cincinnati
Registered: 2006-12-02
Posts: 6,730

Re: looking for Dell Cerc SATA 2s Driver

again you don't show the HWID for that device ERGO you don't have one

Second Since the drivers are only for 2003 server you may have to build UBCD4Win with 2k3 server source to succeed...

DP BartPE Tutorial DP_BASE Tutorial HWID's Tool Read BEFORE you post UserBars!

The DriverPacks, the DP_Base program, and Support Forum are FREE!.

mr_smartepants · 2011-03-14 17:36:44

mr_smartepants
Administrator & DriverPacks Developer
Offline

From: Cambridgeshire, UK
Registered: 2007-01-27
Posts: 6,226

Re: looking for Dell Cerc SATA 2s Driver

jharl wrote:

dell server where that card id installed (emedded in th MB).

If the embedded device is not enabled in the bios, it won't be "seen" by any utility.

Read BEFORE you post. HWID tool DriverPacks Tutorial DONATE!

Not all heroes wear capes, some wear Kevlar!

jharl · 2011-03-15 00:18:59

jharl
DriverPacks newbie
Offline

Registered: 2011-03-13
Posts: 5

Re: looking for Dell Cerc SATA 2s Driver

that is true, device was enabled, booted with uncd4win and the os (ubce4win) did b=not see it.

cdob · 2011-03-15 03:59:33

cdob
DriverPacks Guru
Offline

Registered: 2006-08-13
Posts: 270

Re: looking for Dell Cerc SATA 2s Driver

jharl wrote:

that is true, device was enabled, booted with uncd4win and the os (ubce4win) did b=not see it.

But did devcon list a relating HardwareID?
So far it's a BIOS issue first. There have to have a HardwareID first.

Dosn't use a Poweredge 1800 a XEON cpu? That's not a Core2Duo.
List Poweredge 1800 HardwareIDs.

Last edited by cdob (2011-03-15 04:09:59)

looking for Dell Cerc SATA 2s Driver

Posts [ 11 ]

1 Topic by jharl 2011-03-13 14:08:42

Topic: looking for Dell Cerc SATA 2s Driver

2 Reply by mr_smartepants 2011-03-13 18:24:38

Re: looking for Dell Cerc SATA 2s Driver

3 Reply by jharl 2011-03-13 23:43:39

Re: looking for Dell Cerc SATA 2s Driver

4 Reply by mr_smartepants 2011-03-14 00:04:49

Re: looking for Dell Cerc SATA 2s Driver

5 Reply by jharl 2011-03-14 04:37:11

Re: looking for Dell Cerc SATA 2s Driver

6 Reply by mr_smartepants 2011-03-14 08:53:35

Re: looking for Dell Cerc SATA 2s Driver

7 Reply by jharl 2011-03-14 14:02:51

Re: looking for Dell Cerc SATA 2s Driver

8 Reply by OverFlow 2011-03-14 15:19:05

Re: looking for Dell Cerc SATA 2s Driver

9 Reply by mr_smartepants 2011-03-14 17:36:44

Re: looking for Dell Cerc SATA 2s Driver

10 Reply by jharl 2011-03-15 00:18:59

Re: looking for Dell Cerc SATA 2s Driver

11 Reply by cdob 2011-03-15 03:59:33

Re: looking for Dell Cerc SATA 2s Driver

Posts [ 11 ]