BartPE error with DP_LAN_wnt5_x86-32_1101

dehuu76 · 2011-02-02 17:43:17

dehuu76
DriverPacks newbie
Offline

Registered: 2011-02-02
Posts: 6

Topic: BartPE error with DP_LAN_wnt5_x86-32_1101

Good day! I am using DP_LAN_wnt5_x86-32_1101 with bartpe, network starts automatically and on my realtek pcie integrated nic i receive a message with title of "bartpe.exe drive a: not ready" and buttons cancel, retry, continue. I have to press any button four times and then network starts. Problem has been resolved when i deleted files in folder R4 and used old realtek driver 5.736 07/28/2009 for BartPE
How can i fix this problem?

Last edited by dehuu76 (2011-02-03 17:47:53)

mr_smartepants · 2011-02-02 18:00:19

mr_smartepants
Administrator & DriverPacks Developer
Offline

From: Cambridgeshire, UK
Registered: 2007-01-27
Posts: 6,226

Re: BartPE error with DP_LAN_wnt5_x86-32_1101

dehuu76 wrote:

How can i fix this problem?

You just did.

Moving thread to BartPE section...

Read BEFORE you post. HWID tool DriverPacks Tutorial DONATE!

http://driverpacks.net/userbar/admin-1.png

Not all heroes wear capes, some wear Kevlar!

dehuu76 · 2011-02-02 18:25:47

dehuu76
DriverPacks newbie
Offline

Registered: 2011-02-02
Posts: 6

Re: BartPE error with DP_LAN_wnt5_x86-32_1101

Yes, but how can i fix this problem using new drivers?

Last edited by dehuu76 (2011-02-02 18:56:34)

mr_smartepants · 2011-02-03 08:43:03

mr_smartepants
Administrator & DriverPacks Developer
Offline

From: Cambridgeshire, UK
Registered: 2007-01-27
Posts: 6,226

Re: BartPE error with DP_LAN_wnt5_x86-32_1101

Posting your HWIDs would be a good start. I'm not going to delete an entire folder just because one user has a problem. I may be able to weed out one HWID from the .inf though if it's duplicated elsewhere.
Your HWIDs are key.

Read BEFORE you post. HWID tool DriverPacks Tutorial DONATE!

Not all heroes wear capes, some wear Kevlar!

dehuu76 · 2011-02-03 17:47:10

dehuu76
DriverPacks newbie
Offline

Registered: 2011-02-02
Posts: 6

Re: BartPE error with DP_LAN_wnt5_x86-32_1101

Good day! My nic is Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethrenet NIC
Hwids:
PCI\VEN_10EC&DEV_8168&SUBSYS_E0001458&REV_02
PCI\VEN_10EC&DEV_8168&SUBSYS_E0001458
PCI\VEN_10EC&DEV_8168&CC_020000
PCI\VEN_10EC&DEV_8168&CC_0200

I have already used latest drivers from Realtek (5.780.1228.2010), but problem the same
Old working drivers, unfortunately, does not support RTL8168E
And in "full" WinXP SP3 new drivers works without any "bad" windows

Last edited by dehuu76 (2011-02-03 17:56:03)

mr_smartepants · 2011-02-03 18:30:33

mr_smartepants
Administrator & DriverPacks Developer
Offline

From: Cambridgeshire, UK
Registered: 2007-01-27
Posts: 6,226

Re: BartPE error with DP_LAN_wnt5_x86-32_1101

Well if the newer drivers don't work in PE, then just remove the folder for now.
As an alternative, you can edit the DriverPack LAN .ini and remove the semicolons from the [r4] section like this:

[R4]
; BartPE Code
ms_count	 	= 1
ms_1_tag 	= "R4_realtek"
ms_1_sysfile 	= "Rtenicxp.sys"
ms_1_exc_skipIfOS="wxp,w2k3"

Read BEFORE you post. HWID tool DriverPacks Tutorial DONATE!

Not all heroes wear capes, some wear Kevlar!

dehuu76 · 2011-02-03 18:37:12

dehuu76
DriverPacks newbie
Offline

Registered: 2011-02-02
Posts: 6

Re: BartPE error with DP_LAN_wnt5_x86-32_1101

Ok, i will try this. New realtek drivers works in bartpe, but i have to press any button four times.
My old working drivers (just in case, without any bad windows in BartPE) http://rapidshare.com/files/445916717/R … D_WORK.zip

OverFlow · 2011-02-03 18:51:04

OverFlow
DriverPacks Administrator & BASE Developer
Offline

From: Cincinnati
Registered: 2006-12-02
Posts: 6,730

Re: BartPE error with DP_LAN_wnt5_x86-32_1101

ms_1_exc_skipIfOS ="wxp,w2k3"

the above code marks the entire R4 folder to be skipped for windows XP and windows 2k3

(which means excluded for bartpe since it only supports xp and 2k3)

[R4]
; BartPE Code
ms_count	 	= 1
ms_1_tag 	= "R4_realtek"
ms_1_sysfile 	= "Rtenicxp.sys"

enabled for XP and 2K3 (Fully enabled) for BartPE

=====================

[R4]
; BartPE Code
ms_count	 	= 1
ms_1_tag 	= "R4_realtek"
ms_1_sysfile 	= "Rtenicxp.sys"
ms_1_exc_skipIfOS   ="wxp"

Disabled for XP in BartPE

=========================

[R4]
; BartPE Code
ms_count	 	= 1
ms_1_tag 	= "R4_realtek"
ms_1_sysfile 	= "Rtenicxp.sys"
ms_1_exc_skipIfOS   ="w2k3"

Disabled for Windows 2003 in BartPE

=================================

[R4]
; BartPE Code
ms_count	 	= 1
ms_1_tag 	= "R4_realtek"
ms_1_sysfile 	= "Rtenicxp.sys"
ms_1_exc_skipIfOS   ="wxp,w2k3"

Completely Disabled for BartPE = IIRC the last one is read the same as:

;[R4]
; BartPE Code
;ms_count	 	= 1
;ms_1_tag 	= "R4_realtek"
;ms_1_sysfile 	= "Rtenicxp.sys"
;ms_1_exc_skipIfOS   ="wxp,w2k"

DP BartPE Tutorial DP_BASE Tutorial HWID's Tool Read BEFORE you post UserBars!

The DriverPacks, the DP_Base program, and Support Forum are FREE!.

mr_smartepants · 2011-02-04 06:06:05

mr_smartepants
Administrator & DriverPacks Developer
Offline

From: Cambridgeshire, UK
Registered: 2007-01-27
Posts: 6,226

Re: BartPE error with DP_LAN_wnt5_x86-32_1101

My Gigabyte board has the HWIDs:
PCI\VEN_10EC&DEV_8168&SUBSYS_E0001458&REV_01
PCI\VEN_10EC&DEV_8168&SUBSYS_E0001458
PCI\VEN_10EC&DEV_8168&CC_020000
PCI\VEN_10EC&DEV_8168&CC_0200

The only difference between mine and yours is the &REV_02 (The rev_02 is not supported by R4). Mine works perfectly fine on a new build of UBCD4win.
What motherboard make and version do you have?

New version of Realtek from Gigabyte: http://www.gigabyte.com/products/produc … l=1#driver

v11.02r1
Updated
-R4\ Realtek 10/100/1000 PCI-E NIC Family NDIS XP DriverVer = 01/14/2011,5.782.0114.2011

Read BEFORE you post. HWID tool DriverPacks Tutorial DONATE!

Not all heroes wear capes, some wear Kevlar!

dehuu76 · 2011-02-04 07:03:16

dehuu76
DriverPacks newbie
Offline

Registered: 2011-02-02
Posts: 6

Re: BartPE error with DP_LAN_wnt5_x86-32_1101

I tried on following motheboards:
Asus P5QL SE with integrated
Realtek RTL8168C/8111C PCI-E Gigabit Ethernet
PCI\VEN_10EC&DEV_8168&SUBSYS_83671043&REV_02
PCI\VEN_10EC&DEV_8168&SUBSYS_83671043
PCI\VEN_10EC&DEV_8168&CC_020000
PCI\VEN_10EC&DEV_8168&CC_0200

MSI P35 Neo with integrated
Realtek RTL8168/8111 PCI-E Gigabit Ethernet Adapter
PCI\VEN_10EC&DEV_8168&SUBSYS_360C1462&REV_01
PCI\VEN_10EC&DEV_8168&SUBSYS_360C1462
PCI\VEN_10EC&DEV_8168&CC_020000
PCI\VEN_10EC&DEV_8168&CC_0200

I used pebuilder 3.1.10a

mr_smartepants · 2011-02-04 08:09:51

mr_smartepants
Administrator & DriverPacks Developer
Offline

From: Cambridgeshire, UK
Registered: 2007-01-27
Posts: 6,226

Re: BartPE error with DP_LAN_wnt5_x86-32_1101

dehuu76 wrote:

Good day! My nic is Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethrenet NIC
Hwids:
PCI\VEN_10EC&DEV_8168&SUBSYS_E0001458&REV_02
PCI\VEN_10EC&DEV_8168&SUBSYS_E0001458
PCI\VEN_10EC&DEV_8168&CC_020000
PCI\VEN_10EC&DEV_8168&CC_0200
I have already used latest drivers from Realtek (5.780.1228.2010), but problem the same

dehuu76 wrote:

I tried on following motheboards:
Asus P5QL SE with integrated
Realtek RTL8168C/8111C PCI-E Gigabit Ethernet
PCI\VEN_10EC&DEV_8168&SUBSYS_83671043&REV_02
PCI\VEN_10EC&DEV_8168&SUBSYS_83671043
PCI\VEN_10EC&DEV_8168&CC_020000
PCI\VEN_10EC&DEV_8168&CC_0200
MSI P35 Neo with integrated
Realtek RTL8168/8111 PCI-E Gigabit Ethernet Adapter
PCI\VEN_10EC&DEV_8168&SUBSYS_360C1462&REV_01
PCI\VEN_10EC&DEV_8168&SUBSYS_360C1462
PCI\VEN_10EC&DEV_8168&CC_020000
PCI\VEN_10EC&DEV_8168&CC_0200
I used pebuilder 3.1.10a

Well I don't know what to tell you. My motherboard works perfectly fine using the new drivers under BartPE (UBCD4win 3.6)
Drivers used: 01/14/2011,5.782.0114.2011

There must be something odd with how you're building your source.

Read BEFORE you post. HWID tool DriverPacks Tutorial DONATE!

Not all heroes wear capes, some wear Kevlar!

cdob · 2011-02-04 10:39:50

cdob
DriverPacks Guru
Offline

Registered: 2006-08-13
Posts: 270

Re: BartPE error with DP_LAN_wnt5_x86-32_1101

dehuu76 wrote:

I used pebuilder 3.1.10a

Use InfCacheBuild too http://www.911cd.net/forums//index.php?showtopic=21226

dehuu76 · 2011-02-04 18:09:30

dehuu76
DriverPacks newbie
Offline

Registered: 2011-02-02
Posts: 6

Re: BartPE error with DP_LAN_wnt5_x86-32_1101

I use InfCacheBuild. But why this old drivers works in BartPE without any "bad" windows? And why exactly four times i have to press in window (reference really to drive a or simply bug?)

cdob · 2011-02-04 22:58:54

cdob
DriverPacks Guru
Offline

Registered: 2006-08-13
Posts: 270

Re: BartPE error with DP_LAN_wnt5_x86-32_1101

dehuu76 wrote:

I use InfCacheBuild.

Does driver *.inf contain CopyFiles lines at your BartPE?

But why this old drivers works in BartPE without any "bad" windows?

Does old driver does not use CoDeviceInstaller?
Does new driver use CoDeviceInstaller?

BartPE error with DP_LAN_wnt5_x86-32_1101

Posts [ 14 ]

1 Topic by dehuu76 2011-02-02 17:43:17

Topic: BartPE error with DP_LAN_wnt5_x86-32_1101

2 Reply by mr_smartepants 2011-02-02 18:00:19

Re: BartPE error with DP_LAN_wnt5_x86-32_1101

3 Reply by dehuu76 2011-02-02 18:25:47

Re: BartPE error with DP_LAN_wnt5_x86-32_1101

4 Reply by mr_smartepants 2011-02-03 08:43:03

Re: BartPE error with DP_LAN_wnt5_x86-32_1101

5 Reply by dehuu76 2011-02-03 17:47:10

Re: BartPE error with DP_LAN_wnt5_x86-32_1101

6 Reply by mr_smartepants 2011-02-03 18:30:33

Re: BartPE error with DP_LAN_wnt5_x86-32_1101

7 Reply by dehuu76 2011-02-03 18:37:12

Re: BartPE error with DP_LAN_wnt5_x86-32_1101

8 Reply by OverFlow 2011-02-03 18:51:04

Re: BartPE error with DP_LAN_wnt5_x86-32_1101

9 Reply by mr_smartepants 2011-02-04 06:06:05

Re: BartPE error with DP_LAN_wnt5_x86-32_1101

10 Reply by dehuu76 2011-02-04 07:03:16

Re: BartPE error with DP_LAN_wnt5_x86-32_1101

11 Reply by mr_smartepants 2011-02-04 08:09:51

Re: BartPE error with DP_LAN_wnt5_x86-32_1101

12 Reply by cdob 2011-02-04 10:39:50

Re: BartPE error with DP_LAN_wnt5_x86-32_1101

13 Reply by dehuu76 2011-02-04 18:09:30

Re: BartPE error with DP_LAN_wnt5_x86-32_1101

14 Reply by cdob 2011-02-04 22:58:54

Re: BartPE error with DP_LAN_wnt5_x86-32_1101

Posts [ 14 ]