• compstuff
  • DriverPacks Wizard & Testing Team Dude
  • Offline
  • From: Florida
  • Registered: 2008-10-06
  • Posts: 429

Topic: ASUS P5N7A-VM - NVIDIA GeForce 9300 / nForce 730i - SATA Problem

I have to admit that I'm sure this is something I'm doing wrong because lately I can't seem to get a single driverpack integration to fully work properly but I would appreciate any help I could get. I will keep this to a single reference board to see if I can make some sense here.

I have a brand new ASUS P5N7A-VM with an Intel Q8200 and 4 gig of memory. I am using a brand new XPSP3 source disk which I have used RyanVM to intergate post SP3 updates along with a few various programs (all of which I have been using for ages with the DP and having great success) I used BASE 8.12.5 with the standard driverpacks and the latest 3rd Party. I have a Seagate SATA drive connected to an AHCI only port on the MB and it isn't being recognized. It does install when connected to an IDE emulation port

DPs_BASE.log:

2009-10-11 11:49:46 : <INIT> DriverPacks BASE 8.12.5 initialized.
2009-10-11 11:49:46 : <INIT> Host environment: WIN_XP Service Pack 3 on X86 CPU.
2009-10-11 11:49:46 : <INIT> Created temporary working directory.
2009-10-11 11:49:46 : <INIT> Imported proxy settings from Internet Explorer.
2009-10-11 11:49:46 : <INIT> Start scanning for DriverPacks for the wnt5_x86-32 platform.
2009-10-11 11:49:46 : <INIT> 	Detected DriverPack Chipset 902!
2009-10-11 11:49:46 : <INIT> 	Detected DriverPack CPU 804!
2009-10-11 11:49:46 : <INIT> 	Detected DriverPack Graphics A 906!
2009-10-11 11:49:46 : <INIT> 	Detected DriverPack Graphics B 906!
2009-10-11 11:49:46 : <INIT> 	Detected DriverPack Graphics C 8121!
2009-10-11 11:49:46 : <INIT> 	Detected DriverPack LAN 8121!
2009-10-11 11:49:46 : <INIT> 	Detected DriverPack MassStorage 901!
2009-10-11 11:49:46 : <INIT> 	Detected DriverPack Sound A 805!
2009-10-11 11:49:46 : <INIT> 	Detected DriverPack Sound B 805!
2009-10-11 11:49:46 : <INIT> 	Detected DriverPack WLAN 806!
2009-10-11 11:49:46 : <INIT> 	Detected 3rd Party DriverPack Bluetooth 081028!
2009-10-11 11:49:46 : <INIT> 	Detected 3rd Party DriverPack Broadband 70416!
2009-10-11 11:49:46 : <INIT> 	Detected 3rd Party DriverPack DELLD630 090714!
2009-10-11 11:49:46 : <INIT> 	Detected 3rd Party DriverPack HID 90813!
2009-10-11 11:49:46 : <INIT> 	Detected 3rd Party DriverPack Misc 90909!
2009-10-11 11:49:46 : <INIT> 	Detected 3rd Party DriverPack Modem 90831!
2009-10-11 11:49:46 : <INIT> 	Detected 3rd Party DriverPack Monitor 908130!
2009-10-11 11:49:46 : <INIT> 	Detected 3rd Party DriverPack TV 90915!
2009-10-11 11:49:46 : <INIT> 	Detected 3rd Party DriverPack USB 80911!
2009-10-11 11:49:46 : <INIT> 	Detected 3rd Party DriverPack WebCam 90904!
2009-10-11 11:49:46 : <INIT> 	Finished scanning.
2009-10-11 11:49:46 : <INIT> Detected settings file "C:\!Slipstream\_XPTools\_DriverPacks\DP_8.12.5\DPs_BASE.ini".
2009-10-11 11:49:46 : <INIT> Windows XP Professional -  Retail SP3 detected.
2009-10-11 11:49:46 : <INIT> [Settings]\DPsMethod not specified: default (2) was set.
2009-10-11 11:49:46 : <INIT> [Settings]\finisherMethod not specified: default (GUIRunOnce) was set.
2009-10-11 11:49:46 : <INIT> [OptionalSettings]\KTD not specified: default (none) was set.
2009-10-11 11:49:46 : <INIT> [OptionalSettings]\QSC not specified: default (yes) was set.
2009-10-11 11:49:46 : <INIT> [OptionalSettingsOther]\ATI_cpl not specified: default (None) was set.
2009-10-11 11:49:46 : <INIT> [OptionalSettingsOther]\Nvidia_cpl not specified: default (None) was set.
2009-10-11 11:49:46 : <INIT> wnt5_x86-32_disc is the selected installation platform .
2009-10-11 11:49:46 : <INIT> Imported settings from settings file.
2009-10-11 11:49:46 : <GUI>  Initialized GUI.
2009-10-11 11:49:46 : <GUI>  Created a list of all available language files.
2009-10-11 11:49:46 : <GUI>  Set the last used language, English, as the GUI language.
2009-10-11 11:50:06 : <GUI>  Closed GUI.
2009-10-11 11:50:06 : <GUI>  Saved settings!
2009-10-11 11:50:06 : <CLNP> Temporary working directory successfully deleted.
- = DriverPacks BASE ini settings used = -
[General]
; preferred language
prefLang	= "English"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons	= "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI		= "yes"


[Settings]
; disc/bartpe/multibootDisc
instPlatform	= "disc"
; trailing backslash is allowed, but not necessary
location	= "C:\Y\!Slipstream\_XPBuilds\_10-11-09\DP-PIMS"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks	= "all"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod	= "2"
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod	= "RunOnceEx"


; you should only add this section if you've set [Settings]\finishMethod to "RunOnceEx"
[RunOnceExSettings]
; custom/default, if not specified: default
startID		= "custom"
; anything you wish ...
customStartID	= "987"


; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD		= "false"
; <path>, to specify a custom KTD cache location, if not specified: default (%SystemRoot%\DriverPacks)
KTDlocation	= "%SystemRoot%\DriverPacks"
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC		= "yes"


; this section is optional!
[OptionalSettingsOther]
; CCC/CCP/None, use ATI Catalyst Control Center or ATI Catalyst Control Panel (only relevant when slipstreaming DriverPack Graphics A)
; 1/2/3/None, use Nvidia Control Panel - 1 = Old, 2 = New, 3 = Both, None
ATI_cpl		= "CCC"
Nvidia_cpl	= "3"
2009-10-11 11:50:06 : <CLNP> Create a DPs_Base.log backup @ C:\!Slipstream\_XPTools\_DriverPacks\DP_8.12.5\LogFiles\DPs_BASE_09-10-11_11-50.log
2009-10-11 11:50:06 : <CLNP> Program terminated.

HWIDs.txt:

=========== 
PCI Devices 
=========== 
PCI\VEN_10DE&DEV_086C&SUBSYS_83561043&REV_B1\4&37DE7142&0&0080: NVIDIA GeForce 9300 / nForce 730i
PCI\VEN_10DE&DEV_0A80&SUBSYS_00000000&REV_B1\3&267A616A&0&00: PCI standard host CPU bridge
PCI\VEN_10DE&DEV_0A88&SUBSYS_83561043&REV_B1\3&267A616A&0&01: PCI standard RAM Controller
PCI\VEN_10DE&DEV_0A89&SUBSYS_83561043&REV_B1\3&267A616A&0&1B: PCI standard RAM Controller
PCI\VEN_10DE&DEV_0A98&SUBSYS_83561043&REV_B1\3&267A616A&0&1C: PCI standard RAM Controller
PCI\VEN_10DE&DEV_0AA0&SUBSYS_00000000&REV_B1\3&267A616A&0&80: PCI standard PCI-to-PCI bridge
PCI\VEN_10DE&DEV_0AA2&SUBSYS_83561043&REV_B1\3&267A616A&0&1A: NVIDIA nForce PCI System Management
PCI\VEN_10DE&DEV_0AA3&SUBSYS_83561043&REV_B1\3&267A616A&0&1D: NVIDIA nForce System Management Controller
PCI\VEN_10DE&DEV_0AA4&SUBSYS_83561043&REV_B1\3&267A616A&0&19: PCI standard RAM Controller
PCI\VEN_10DE&DEV_0AA5&SUBSYS_83561043&REV_B1\3&267A616A&0&20: Standard OpenHCD USB Host Controller
PCI\VEN_10DE&DEV_0AA6&SUBSYS_83561043&REV_B1\3&267A616A&0&21: Standard Enhanced PCI to USB Host Controller
PCI\VEN_10DE&DEV_0AA7&SUBSYS_83561043&REV_B1\3&267A616A&0&30: Standard OpenHCD USB Host Controller
PCI\VEN_10DE&DEV_0AA9&SUBSYS_83561043&REV_B1\3&267A616A&0&31: Standard Enhanced PCI to USB Host Controller
PCI\VEN_10DE&DEV_0AAB&SUBSYS_00000000&REV_B1\3&267A616A&0&48: PCI standard PCI-to-PCI bridge
PCI\VEN_10DE&DEV_0AAC&SUBSYS_00000000&REV_B2\3&267A616A&0&18: PCI standard ISA bridge
PCI\VEN_10DE&DEV_0AB0&SUBSYS_83561043&REV_B1\3&267A616A&0&50: NVIDIA Network Bus Enumerator
PCI\VEN_10DE&DEV_0AB4&SUBSYS_83561043&REV_B1\3&267A616A&0&58: Standard Dual Channel PCI IDE Controller
PCI\VEN_10DE&DEV_0AC0&SUBSYS_82FE1043&REV_B1\3&267A616A&0&40: Microsoft UAA Bus Driver for High Definition Audio
PCI\VEN_10DE&DEV_0AC4&SUBSYS_00000000&REV_B1\3&267A616A&0&60: PCI standard PCI-to-PCI bridge
PCI\VEN_10DE&DEV_0AC6&SUBSYS_00000000&REV_B1\3&267A616A&0&A8: PCI standard PCI-to-PCI bridge
PCI\VEN_10DE&DEV_0AC7&SUBSYS_00000000&REV_B1\3&267A616A&0&B0: PCI standard PCI-to-PCI bridge
PCI\VEN_197B&DEV_2368&SUBSYS_827E1043&REV_00\4&BF75662&0&00B0: JMicron JMB368 Controller
22 matching device(s) found.
 
=========== 
USB Devices 
=========== 
USB\ROOT_HUB\4&17503E92&0                                   : USB Root Hub
USB\ROOT_HUB\4&49F402D&0                                    : USB Root Hub
USB\ROOT_HUB20\4&1A0E88A0&0                                 : USB Root Hub
USB\ROOT_HUB20\4&33E1EBD5&0                                 : USB Root Hub
USB\VID_046D&PID_C00E\5&7CCE6A6&0&3                         : USB Optical WheelMouse
5 matching device(s) found.
 
============= 
Input Devices 
============= 
HID\VID_046D&PID_C00E\6&7E48E53&0&0000                      : HID-compliant Wheel Mouse
1 matching device(s) found.
 
============ 
ACPI Devices 
============ 
ACPI\ATK0110\1010110                                        : ATK0110 ACPI UTILITY
ACPI\FIXEDBUTTON\2&DABA3FF&0                                : ACPI Fixed Feature Button
ACPI\GENUINEINTEL_-_X86_FAMILY_6_MODEL_23\_0                : Intel(R) Core(TM)2 Quad CPU    Q8200  @ 2.33GHz
ACPI\GENUINEINTEL_-_X86_FAMILY_6_MODEL_23\_1                : Intel(R) Core(TM)2 Quad CPU    Q8200  @ 2.33GHz
ACPI\GENUINEINTEL_-_X86_FAMILY_6_MODEL_23\_2                : Intel(R) Core(TM)2 Quad CPU    Q8200  @ 2.33GHz
ACPI\GENUINEINTEL_-_X86_FAMILY_6_MODEL_23\_3                : Intel(R) Core(TM)2 Quad CPU    Q8200  @ 2.33GHz
ACPI\PNP0000\4&30BAF108&0                                   : Programmable interrupt controller
ACPI\PNP0100\4&30BAF108&0                                   : System timer
ACPI\PNP0103\0                                              : High Precision Event Timer
ACPI\PNP0200\4&30BAF108&0                                   : Direct memory access controller
ACPI\PNP0303\4&30BAF108&0                                   : PS/2 Keyboard (106 Keys Ctrl+Caps)
ACPI\PNP0800\4&30BAF108&0                                   : System speaker
ACPI\PNP0A03\0                                              : PCI bus
ACPI\PNP0B00\4&30BAF108&0                                   : System CMOS/real time clock
ACPI\PNP0C01\1                                              : System board
ACPI\PNP0C02\0                                              : Motherboard resources
ACPI\PNP0C02\10                                             : Motherboard resources
ACPI\PNP0C02\11                                             : Motherboard resources
ACPI\PNP0C02\2E                                             : Motherboard resources
ACPI\PNP0C04\4&30BAF108&0                                   : Numeric data processor
ACPI\PNP0C0C\AA                                             : ACPI Power Button
ACPI\PNP0C14\NVIF                                           : Microsoft Windows Management Interface for ACPI
ACPI_HAL\PNP0C08\0                                          : Microsoft ACPI-Compliant System
ROOT\ACPI_HAL\0000                                          : ACPI Multiprocessor PC
24 matching device(s) found.
 
============ 
 HDA Audio 
============ 
HDAUDIO\FUNC_01&VEN_10DE&DEV_0007&SUBSYS_10438356&REV_1001\4&25F581FB&0&0301: Audio Device on High Definition Audio Bus
HDAUDIO\FUNC_01&VEN_10EC&DEV_0888&SUBSYS_104382FE&REV_1001\4&25F581FB&0&0001: Realtek High Definition Audio
2 matching device(s) found.
 
============ 
RAID Devices 
============ 
PCI\VEN_10DE&DEV_0AB4&SUBSYS_83561043&REV_B1\3&267A616A&0&58
    Name: Standard Dual Channel PCI IDE Controller
    Hardware ID's:
        PCI\VEN_10DE&DEV_0AB4&SUBSYS_83561043&REV_B1
        PCI\VEN_10DE&DEV_0AB4&SUBSYS_83561043
        PCI\VEN_10DE&DEV_0AB4&CC_010185
        PCI\VEN_10DE&DEV_0AB4&CC_0101
    Compatible ID's:
        PCI\VEN_10DE&DEV_0AB4&REV_B1
        PCI\VEN_10DE&DEV_0AB4
        PCI\VEN_10DE&CC_010185
        PCI\VEN_10DE&CC_0101
        PCI\VEN_10DE
        PCI\CC_010185
        PCI\CC_0101
PCI\VEN_197B&DEV_2368&SUBSYS_827E1043&REV_00\4&BF75662&0&00B0
    Name: JMicron JMB368 Controller
    Hardware ID's:
        PCI\VEN_197B&DEV_2368&SUBSYS_827E1043&REV_00
        PCI\VEN_197B&DEV_2368&SUBSYS_827E1043
        PCI\VEN_197B&DEV_2368&CC_010185
        PCI\VEN_197B&DEV_2368&CC_0101
    Compatible ID's:
        PCI\VEN_197B&DEV_2368&REV_00
        PCI\VEN_197B&DEV_2368
        PCI\VEN_197B&CC_010185
        PCI\VEN_197B&CC_0101
        PCI\VEN_197B
        PCI\CC_010185
        PCI\CC_0101
2 matching device(s) found.
  • OverFlow
  • DriverPacks Administrator & BASE Developer
  • Offline
  • From: Cincinnati
  • Registered: 2006-12-02
  • Posts: 6,730

Re: ASUS P5N7A-VM - NVIDIA GeForce 9300 / nForce 730i - SATA Problem

can you try the nightly RC build and report?

DriverPack MassStorage 9.09.RC6

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

OverFlow's Website

  • compstuff
  • DriverPacks Wizard & Testing Team Dude
  • Offline
  • From: Florida
  • Registered: 2008-10-06
  • Posts: 429

Re: ASUS P5N7A-VM - NVIDIA GeForce 9300 / nForce 730i - SATA Problem

OverFlow wrote:

can you try the nightly RC build and report?

DriverPack MassStorage 9.09.RC6

Just tried it an got the same thing... doesn't find any hard disks installed:

2009-10-11 15:37:37 : <INIT> DriverPacks BASE 8.12.5 initialized.
2009-10-11 15:37:37 : <INIT> Host environment: WIN_XP Service Pack 3 on X86 CPU.
2009-10-11 15:37:37 : <INIT> Created temporary working directory.
2009-10-11 15:37:37 : <INIT> Imported proxy settings from Internet Explorer.
2009-10-11 15:37:37 : <INIT> Start scanning for DriverPacks for the wnt5_x86-32 platform.
2009-10-11 15:37:37 : <INIT> 	Detected DriverPack Chipset 909r4!
2009-10-11 15:37:37 : <INIT> 	Detected DriverPack CPU 9090rc1!
2009-10-11 15:37:37 : <INIT> 	Detected DriverPack Graphics A 910rc1!
2009-10-11 15:37:37 : <INIT> 	Detected DriverPack Graphics B 910rc1!
2009-10-11 15:37:37 : <INIT> 	Detected DriverPack Graphics C 910rc1!
2009-10-11 15:37:37 : <INIT> 	Detected DriverPack LAN 90904!
2009-10-11 15:37:37 : <INIT> 	Detected DriverPack MassStorage 909r6!
2009-10-11 15:37:37 : <INIT> 	Detected DriverPack Sound A 90902!
2009-10-11 15:37:37 : <INIT> 	Detected DriverPack Sound B 90903!
2009-10-11 15:37:37 : <INIT> 	Detected DriverPack WLAN 90807!
2009-10-11 15:37:37 : <INIT> 	Detected 3rd Party DriverPack Bluetooth 081028!
2009-10-11 15:37:37 : <INIT> 	Detected 3rd Party DriverPack Broadband 70416!
2009-10-11 15:37:37 : <INIT> 	Detected 3rd Party DriverPack DELLD630 090714!
2009-10-11 15:37:37 : <INIT> 	Detected 3rd Party DriverPack HID 90813!
2009-10-11 15:37:37 : <INIT> 	Detected 3rd Party DriverPack Misc 90909!
2009-10-11 15:37:37 : <INIT> 	Detected 3rd Party DriverPack Modem 90831!
2009-10-11 15:37:37 : <INIT> 	Detected 3rd Party DriverPack Monitor 908130!
2009-10-11 15:37:37 : <INIT> 	Detected 3rd Party DriverPack TV 90915!
2009-10-11 15:37:37 : <INIT> 	Detected 3rd Party DriverPack USB 80911!
2009-10-11 15:37:37 : <INIT> 	Detected 3rd Party DriverPack WebCam 90904!
2009-10-11 15:37:37 : <INIT> 	Finished scanning.
2009-10-11 15:37:37 : <INIT> Detected settings file "C:\!Slipstream\_XPTools\_DriverPacks\DP_8.12.5_nightly\DPs_BASE.ini".
2009-10-11 15:37:37 : <INIT> Windows XP Professional -  Retail SP3 detected.
2009-10-11 15:37:37 : <INIT> [Settings]\DPsMethod not specified: default (2) was set.
2009-10-11 15:37:37 : <INIT> [Settings]\finisherMethod not specified: default (GUIRunOnce) was set.
2009-10-11 15:37:37 : <INIT> [OptionalSettings]\KTD not specified: default (none) was set.
2009-10-11 15:37:37 : <INIT> [OptionalSettings]\QSC not specified: default (yes) was set.
2009-10-11 15:37:37 : <INIT> [OptionalSettingsOther]\ATI_cpl not specified: default (None) was set.
2009-10-11 15:37:37 : <INIT> [OptionalSettingsOther]\Nvidia_cpl not specified: default (None) was set.
2009-10-11 15:37:37 : <INIT> wnt5_x86-32_disc is the selected installation platform .
2009-10-11 15:37:37 : <INIT> Imported settings from settings file.
2009-10-11 15:37:37 : <INIT> [Settings]\DPsMethod not specified: default (2) was set.
2009-10-11 15:37:37 : <INIT> [Settings]\finisherMethod not specified: default (GUIRunOnce) was set.
2009-10-11 15:37:37 : <INIT> [OptionalSettings]\KTD not specified: default (none) was set.
2009-10-11 15:37:37 : <INIT> [OptionalSettings]\QSC not specified: default (yes) was set.
2009-10-11 15:37:37 : <INIT> [OptionalSettingsOther]\ATI_cpl not specified: default (None) was set.
2009-10-11 15:37:37 : <INIT> [OptionalSettingsOther]\Nvidia_cpl not specified: default (None) was set.
2009-10-11 15:37:37 : <INIT> QuickStream Cache directory not found!
2009-10-11 15:37:37 : <GUI>  Initialized GUI.
2009-10-11 15:37:37 : <GUI>  Created a list of all available language files.
2009-10-11 15:37:37 : <GUI>  Set the last used language, English, as the GUI language.
2009-10-11 15:37:49 : <GUI>  Changed Windows installation files OR export (depending on the installation platform) location to C:\Y\!Slipstream\_XPBuilds\_10-11-09\DriverPacks BASE-PIMS.
2009-10-11 15:37:49 : <GUI>  Windows XP Professional -  Retail SP3 detected.
2009-10-11 15:37:49 : <GUI>  wnt5_x86-32_disc is the selected installation platform .
2009-10-11 15:38:34 : <GUI>  Refreshed UpdateChecker with success.
2009-10-11 15:38:46 : <GUI>  Saved settings!
2009-10-11 15:38:46 : <GUI>  Closed GUI.
2009-10-11 15:38:46 : <SEL>  Selected module: mod_slip_wxp_x86-32_disc_m2.
2009-10-11 15:38:47 : <PREP> Removed all attributes from \I386.
2009-10-11 15:38:47 : <PREP> Deleted \$OEM$\$1\*.ini.
2009-10-11 15:38:47 : <PREP> \I386\winnt.org was not found, \I386\winnt.sif was not restored.
2009-10-11 15:38:47 : <PREP> Neither txtsetup.org or dosnet.org was found. The removal of 
2009-10-11 15:38:47 : <PREP> any Service Packs we may have added with Driverpacks and or 
2009-10-11 15:38:47 : <PREP> removal of Mass Storage textmode drivers was skipped
2009-10-11 15:38:50 : <PREP> Verified method 2 references don't exist in txtsetup.sif or dosnet.inf.
2009-10-11 15:38:50 : <PREP> Cleaned up \$OEM$\cmdlines.txt.
2009-10-11 15:38:50 : <PREP> Deleted \$OEM$\ROE.exe.
2009-10-11 15:38:50 : <SLIP> Created QSC directory.
2009-10-11 15:38:59 : <SLIP> Extracted DriverPack MassStorage to a temporary working directory.
2009-10-11 15:38:59 : <SLIP> C:\!Slipstream\_XPTools\_DriverPacks\DP_8.12.5_nightly\tmp\DPMtmp\DriverPack_MassStorage_wnt5_x86-32.ini
2009-10-11 15:39:00 : <SLIP> Processing the files now. This may take a minute.
2009-10-11 15:39:24 : <SLIP> Created QuickStream Cache for DriverPack MassStorage text mode drivers.
2009-10-11 15:39:24 : <SLIP> Slipstreamed DP MassStorage text mode drivers using QuickStream Cache.
2009-10-11 15:39:24 : <SLIP> txtsetup.sif Backed-up Successfully
2009-10-11 15:39:24 : <SLIP> dosnet.inf Backed-up Successfully
2009-10-11 15:39:31 : <SLIP> Removed entries from \I386\txtsetup.sif that will be updated.
2009-10-11 15:39:32 : <SLIP> Removed entries from \I386\dosnet.inf that will be updated.
2009-10-11 15:40:20 : <SLIP> Updated \I386\dosnet.inf and \I386\txtsetup.sif to support DP MassStorage text mode drivers.
2009-10-11 15:40:20 : <SLIP> Created necessary directory structure for method 2.
2009-10-11 15:40:20 : <SLIP> Copying files necessary for method 2.
2009-10-11 15:40:20 : <SLIP> Extracted additional files necessary for method 2.
2009-10-11 15:40:20 : <SLIP> expanded setup.ex_ to setuporg.exe
2009-10-11 15:40:20 : <SLIP> SETUP.EX_ Backed-up Successfully
2009-10-11 15:40:20 : <SLIP> Compressed setup.exe to SETUP.EX_.
2009-10-11 15:40:20 : <SLIP> Method 2 setup.ex_ installed
2009-10-11 15:40:20 : <SLIP> Created \I386\presetup.cmd file.
2009-10-11 15:40:20 : <SLIP> Updated \I386\txtsetup.sif to support method 2.
2009-10-11 15:40:21 : <SLIP> Updated \I386\dosnet.inf to support method 2.
2009-10-11 15:40:21 : <SLIP> Copied DriverPack Chipset to \OEM.
2009-10-11 15:40:21 : <SLIP> Copied DriverPack CPU to \OEM.
2009-10-11 15:40:24 : <SLIP> Copied DriverPack Graphics A to \OEM.
2009-10-11 15:40:31 : <SLIP> Copied DriverPack Graphics B to \OEM.
2009-10-11 15:40:36 : <SLIP> Copied DriverPack Graphics C to \OEM.
2009-10-11 15:40:36 : <SLIP> Copied DriverPack LAN to \OEM.
2009-10-11 15:40:36 : <SLIP> Copied DriverPack MassStorage to \OEM.
2009-10-11 15:40:42 : <SLIP> Copied DriverPack Sound A to \OEM.
2009-10-11 15:40:47 : <SLIP> Copied DriverPack Sound B to \OEM.
2009-10-11 15:40:48 : <SLIP> Copied DriverPack WLAN to \OEM.
2009-10-11 15:40:57 : <SLIP> Renamed DriverPack DPCP9090rc1.7z to DPCP9090.7z in \OEM.
2009-10-11 15:40:57 : <SLIP> Renamed DriverPack DPGA910rc1.7z to DPGA910r.7z in \OEM.
2009-10-11 15:40:57 : <SLIP> Renamed DriverPack DPGB910rc1.7z to DPGB910r.7z in \OEM.
2009-10-11 15:40:57 : <SLIP> Renamed DriverPack DPGC910rc1.7z to DPGC910r.7z in \OEM.
2009-10-11 15:40:57 : <SLIP> Renamed DriverPack DPSA90902.7z to DPSA9090.7z in \OEM.
2009-10-11 15:40:57 : <SLIP> Renamed DriverPack DPSB90903.7z to DPSB9090.7z in \OEM.
2009-10-11 15:40:57 : <SLIP> Renamed DriverPack DP_Bluetooth_wnt5_x86-32_081028.7z to DP_Bluet.7z in \OEM.
2009-10-11 15:40:57 : <SLIP> Renamed DriverPack DP_Broadband_wnt5_x86-32_70416.7z to DP_Broad.7z in \OEM.
2009-10-11 15:40:57 : <SLIP> Renamed DriverPack DP_DELLD630_wnt5_x86-32_090714.7z to DP_DELLD.7z in \OEM.
2009-10-11 15:40:57 : <SLIP> Renamed DriverPack DP_HID_wnt5_x86-32_90813.7z to DP_HID_w.7z in \OEM.
2009-10-11 15:40:57 : <SLIP> Renamed DriverPack DP_Misc_wnt5_x86-32_90909.7z to DP_Misc_.7z in \OEM.
2009-10-11 15:40:57 : <SLIP> Renamed DriverPack DP_Modem_wnt5_x86-32_90831.7z to DP_Modem.7z in \OEM.
2009-10-11 15:40:57 : <SLIP> Renamed DriverPack DP_Monitor_wnt5_x86-32_908130.7z to DP_Monit.7z in \OEM.
2009-10-11 15:40:57 : <SLIP> Renamed DriverPack DP_TV_wnt5_x86-32_90915.7z to DP_TV_wn.7z in \OEM.
2009-10-11 15:40:57 : <SLIP> Renamed DriverPack DP_USB_wnt5_x86-32_80911.7z to DP_USB_w.7z in \OEM.
2009-10-11 15:40:57 : <SLIP> Renamed DriverPack DP_WebCam_wnt5_x86-32_90904.7z to DP_WebCa.7z in \OEM.
2009-10-11 15:40:57 : <SLIP> Copied DriverPacks to \OEM.
2009-10-11 15:40:57 : <SLIP> Will not slipstream patches, Service Pack 3 was detected.
2009-10-11 15:40:58 : <SLIP> WINNT.SIF Backed-up Successfully
2009-10-11 15:40:58 : <SLIP> Updated \I386\winnt.sif to support method 2.
2009-10-11 15:40:58 : <SLIP> Updated DPsFnshr.ini to disable KTD.
2009-10-11 15:40:58 : <SLIP> Updated \$OEM$\cmdlines.txt to execute ROE.exe.
2009-10-11 15:40:58 : <SLIP> DP_Install_Tool was copied successfully
2009-10-11 15:40:58 : <SLIP> Slipstream finished in 2 minutes and 12 seconds.
2009-10-11 15:41:02 : <CLNP> Temporary working directory successfully deleted.
- = DriverPacks BASE ini settings used = -
[General]
; preferred language
prefLang	= "English"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons	= "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI		= "yes"


[Settings]
; disc/bartpe/multibootDisc
instPlatform	= "disc"
; trailing backslash is allowed, but not necessary
location	= "C:\Y\!Slipstream\_XPBuilds\_10-11-09\DriverPacks BASE-PIMS"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks	= "all"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod	= "2"
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod	= "RunOnceEx"


; you should only add this section if you've set [Settings]\finishMethod to "RunOnceEx"
[RunOnceExSettings]
; custom/default, if not specified: default
startID		= "custom"
; anything you wish ...
customStartID	= "987"


; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD		= "false"
; <path>, to specify a custom KTD cache location, if not specified: default (%SystemRoot%\DriverPacks)
KTDlocation	= "%SystemRoot%\DriverPacks"
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC		= "yes"


; this section is optional!
[OptionalSettingsOther]
; CCC/CCP/None, use ATI Catalyst Control Center or ATI Catalyst Control Panel (only relevant when slipstreaming DriverPack Graphics A)
; 1/2/3/None, use Nvidia Control Panel - 1 = Old, 2 = New, 3 = Both, None
ATI_cpl		= "CCC"
Nvidia_cpl	= "3"
2009-10-11 15:41:02 : <CLNP> Create a DPs_Base.log backup @ C:\!Slipstream\_XPTools\_DriverPacks\DP_8.12.5_nightly\LogFiles\DPs_BASE_09-10-11_15-41.log
2009-10-11 15:41:02 : <CLNP> Program terminated.
e
  • OverFlow
  • DriverPacks Administrator & BASE Developer
  • Offline
  • From: Cincinnati
  • Registered: 2006-12-02
  • Posts: 6,730

Re: ASUS P5N7A-VM - NVIDIA GeForce 9300 / nForce 730i - SATA Problem

this concerns me...

2009-10-11 15:38:47 : <PREP> Deleted \$OEM$\$1\*.ini.
2009-10-11 15:38:47 : <PREP> \I386\winnt.org was not found, \I386\winnt.sif was not restored.
2009-10-11 15:38:47 : <PREP> Neither txtsetup.org or dosnet.org was found. The removal of 
2009-10-11 15:38:47 : <PREP> any Service Packs we may have added with Driverpacks and or 
2009-10-11 15:38:47 : <PREP> removal of Mass Storage textmode drivers was skipped
2009-10-11 15:38:50 : <PREP> Verified method 2 references don't exist in txtsetup.sif or dosnet.inf.
2009-10-11 15:38:50 : <PREP> Cleaned up \$OEM$\cmdlines.txt.
2009-10-11 15:38:50 : <PREP> Deleted \$OEM$\ROE.exe.

it does not seem like your source was clean...

you may have also discovered a bug... Deleted \$OEM$\$1\*.ini. (did you have non DriverPacks related ini files there?)
that command may need to be updated to \$OEM$\$1\DriverPack_*.ini. Doh!

It seems (to me and to DriverPacks BASE) as though you are overwriting a source that had a Method 1 slipstream on it previously?

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

OverFlow's Website

  • compstuff
  • DriverPacks Wizard & Testing Team Dude
  • Offline
  • From: Florida
  • Registered: 2008-10-06
  • Posts: 429

Re: ASUS P5N7A-VM - NVIDIA GeForce 9300 / nForce 730i - SATA Problem

OverFlow wrote:

this concerns me...

2009-10-11 15:38:47 : <PREP> Deleted \$OEM$\$1\*.ini.
2009-10-11 15:38:47 : <PREP> \I386\winnt.org was not found, \I386\winnt.sif was not restored.
2009-10-11 15:38:47 : <PREP> Neither txtsetup.org or dosnet.org was found. The removal of 
2009-10-11 15:38:47 : <PREP> any Service Packs we may have added with Driverpacks and or 
2009-10-11 15:38:47 : <PREP> removal of Mass Storage textmode drivers was skipped
2009-10-11 15:38:50 : <PREP> Verified method 2 references don't exist in txtsetup.sif or dosnet.inf.
2009-10-11 15:38:50 : <PREP> Cleaned up \$OEM$\cmdlines.txt.
2009-10-11 15:38:50 : <PREP> Deleted \$OEM$\ROE.exe.

it does not seem like your source was clean...

you may have also discovered a bug... Deleted \$OEM$\$1\*.ini. (did you have non DriverPacks related ini files there?)
that command may need to be updated to \$OEM$\$1\DriverPack_*.ini. Doh!

It seems (to me and to DriverPacks BASE) as though you are overwriting a source that had a Method 1 slipstream on it previously?

I have a file called 500_settings.ini which is actually a file from RogueSpears scriptpack that I use to automatically make adjustments to my page file based on available memory.

I do have a winnt.sif file

The cmdlines.txt and the ROE.exe previous versions that were deleted were a mistake on my part from a bunch or previous tests I made before writing in the forum... basically I accidentally left them in my $OEM$ folder that I copied to the directory for the driverpack integration... I can start another clean test just to be sure...

  • OverFlow
  • DriverPacks Administrator & BASE Developer
  • Offline
  • From: Cincinnati
  • Registered: 2006-12-02
  • Posts: 6,730

Re: ASUS P5N7A-VM - NVIDIA GeForce 9300 / nForce 730i - SATA Problem

so you did discover a BUG... Well done!

It would be my pleasure to honor you by inviting you to fill out a bug report at the bugtracker.
Very, very few people ever get the opportunity to do that wink.

if mass was not previously added then your results are valid... we need to tweek the mass storage pack...

Thanks for reporting!

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

OverFlow's Website

  • compstuff
  • DriverPacks Wizard & Testing Team Dude
  • Offline
  • From: Florida
  • Registered: 2008-10-06
  • Posts: 429

Re: ASUS P5N7A-VM - NVIDIA GeForce 9300 / nForce 730i - SATA Problem

Overflow... Thanks... it is a real honor to contribute something back to  this awesome forum

  • compstuff
  • DriverPacks Wizard & Testing Team Dude
  • Offline
  • From: Florida
  • Registered: 2008-10-06
  • Posts: 429

Re: ASUS P5N7A-VM - NVIDIA GeForce 9300 / nForce 730i - SATA Problem

OverFlow wrote:

so you did discover a BUG... Well done!

if mass was not previously added then your results are valid... we need to tweek the mass storage pack...

I have tried quite a few additional installations and have managed to get most things to work with some suggestions from here but the SATA is one that still doesn't work at all so if their is anything I can do to help with a solution I would be glad to assist.

  • compstuff
  • DriverPacks Wizard & Testing Team Dude
  • Offline
  • From: Florida
  • Registered: 2008-10-06
  • Posts: 429

Re: ASUS P5N7A-VM - NVIDIA GeForce 9300 / nForce 730i - SATA Problem

I have spend the better part of the day continuing to test and learn more about the driver packs. I have been creating or updating some packs for my own use and knowledge and I took a stab at this one by trying a few things but it still doesn't work for me... can you tell me if I made any errors or if I am just too green still :-)

First I downloaded the "NF4-7 actual Driverpacks" for XP (32/64bit) as referenced here: http://www.nforcershq.com/forum/optimiz … 70968.html

I extracted the files and then read the info from the txtsetup.oem for both the SATA and SATA RAID folders

I created a folder called NV7 and copied the files in there

I modified the .ini file by creating a NV7 entry and adding a ms_count=0 to NV6:

[NV7]
ms_count=2
ms_1_deviceName="NVIDIA nForce 9300 SATA/AHCI"
ms_1_tag="nvgts"
ms_1_sysFile="nvgts.sys"
ms_1_hwids="\VEN_10DE&DEV_044D,\VEN_10DE&DEV_044E,\VEN_10DE&DEV_044F,\VEN_10DE&DEV_0554,\VEN_10DE&DEV_0555,\VEN_10DE&DEV_0556,\VEN_10DE&DEV_07F4,\VEN_10DE&DEV_07F5,\VEN_10DE&DEV_07F6,\VEN_10DE&DEV_07F7,\VEN_10DE&DEV_0768,\VEN_10DE&DEV_0AD5,\VEN_10DE&DEV_0AD4,\VEN_10DE&DEV_0AB9,\VEN_10DE&DEV_0AB8,\VEN_10DE&DEV_0BCC,\VEN_10DE&DEV_0BCD"
ms_1_isBusExtender=false
ms_1_exc_disableIfOS="w2k"
ms_2_deviceName="NVIDIA nForce 9300 RAID"
ms_2_tag="nvrd32"
ms_2_sysFile="nvrd32.sys"
ms_2_hwids="\VEN_10DE&DEV_0036,\VEN_10DE&DEV_003E,\VEN_10DE&DEV_0054,\VEN_10DE&DEV_0055,\VEN_10DE&DEV_0266,\VEN_10DE&DEV_0267,\VEN_10DE&DEV_037E,\VEN_10DE&DEV_037F,\VEN_10DE&DEV_036F,\VEN_10DE&DEV_03F6,\VEN_10DE&DEV_03F7,\VEN_10DE&DEV_03E7,\VEN_10DE&DEV_044C,\VEN_10DE&DEV_0558,\VEN_10DE&DEV_0559,\VEN_10DE&DEV_055A,\VEN_10DE&DEV_07F8,\VEN_10DE&DEV_07F9,\VEN_10DE&DEV_07FA,\VEN_10DE&DEV_07FB,\VEN_10DE&DEV_0AD9,\VEN_10DE&DEV_0AD8,\VEN_10DE&DEV_0ABD,\VEN_10DE&DEV_0ABC,\VEN_10DE&DEV_0BC4,\VEN_10DE&DEV_0BC5,SCSI\NVIDIA__Raid_Disk________,SCSI\__NVIDIA_______Raid_Disk,SCSI\NVIDIA__Raid_Disk_20_____,SCSI\__NVIDIA____Raid_Disk_20,*_NVRAIDBUS,*NVRAIDBUS,*NVRAID20"
ms_2_isBusExtender=true
ms_2_exc_disableIfOS="w2k"

I renamed the pack to DP_MassStorage_wnt5_x86-32_909r7 and compressed it.
Finally I added it to the BASE and then integrated... but still NG

If I have made any error in my procedures here I apologize...

Last edited by compstuff (2009-10-14 08:24:42)

  • compstuff
  • DriverPacks Wizard & Testing Team Dude
  • Offline
  • From: Florida
  • Registered: 2008-10-06
  • Posts: 429

Re: ASUS P5N7A-VM - NVIDIA GeForce 9300 / nForce 730i - SATA Problem

I have been swamped at work lately and haven't been able to test anything but I am going to try again today and wondered if my pack changes above looked correct or not?... when I tried them they didn't work but I will double check today.

  • OverFlow
  • DriverPacks Administrator & BASE Developer
  • Offline
  • From: Cincinnati
  • Registered: 2006-12-02
  • Posts: 6,730

Re: ASUS P5N7A-VM - NVIDIA GeForce 9300 / nForce 730i - SATA Problem

they look correct... that is without opening the pack...

make sure the tag name does not already exist... a tag name may only exist once...

Does "nvgts" already exist somewhere in mass? Also make sure the HWIDs do not already exist in another section .

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

OverFlow's Website

  • compstuff
  • DriverPacks Wizard & Testing Team Dude
  • Offline
  • From: Florida
  • Registered: 2008-10-06
  • Posts: 429

Re: ASUS P5N7A-VM - NVIDIA GeForce 9300 / nForce 730i - SATA Problem

Ok I just tried it again and no luck... the drivers I used are definitely good because I did a test with nLite and also tried the basic F6 mode and they worked so I am thinking this must be a mistake I have made. I am going to try a few more things and then give up on the mass storage before I shoot myself lol yikes

EDIT: I THINK I found an error in my ini file... I accidentally deleted the PCI\ from the hwids... I rewrote the ini and am trying it now

Last edited by compstuff (2009-10-21 06:53:58)

  • cdob
  • DriverPacks Guru
  • Offline
  • Registered: 2006-08-13
  • Posts: 270

Re: ASUS P5N7A-VM - NVIDIA GeForce 9300 / nForce 730i - SATA Problem

Nvgts.sys does require additional registry settings.
Compare http://forum.driverpacks.net/viewtopic.php?id=3638

  • compstuff
  • DriverPacks Wizard & Testing Team Dude
  • Offline
  • From: Florida
  • Registered: 2008-10-06
  • Posts: 429

Re: ASUS P5N7A-VM - NVIDIA GeForce 9300 / nForce 730i - SATA Problem

compstuff wrote:

Ok I just tried it again and no luck... the drivers I used are definitely good because I did a test with nLite and also tried the basic F6 mode and they worked so I am thinking this must be a mistake I have made. I am going to try a few more things and then give up on the mass storage before I shoot myself lol yikes

EDIT: I THINK I found an error in my ini file... I accidentally deleted the PCI\ from the hwids... I rewrote the ini and am trying it now

Well I made the changes and ran the test and once again it failed....

cdob wrote:

Nvgts.sys does require additional registry settings.
Compare http://forum.driverpacks.net/viewtopic.php?id=3638

Cdob, that was a great find thank you... I must admit after reading this a half dozen times I am still a little confused regarding the registry changes... the OENPnP I understand but will this not work without the reg changes?

  • OverFlow
  • DriverPacks Administrator & BASE Developer
  • Offline
  • From: Cincinnati
  • Registered: 2006-12-02
  • Posts: 6,730

Re: ASUS P5N7A-VM - NVIDIA GeForce 9300 / nForce 730i - SATA Problem

if the device does not have legacy support then you MUST add the registry entries to the Hive... (Thanks nvidia)

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

OverFlow's Website

  • compstuff
  • DriverPacks Wizard & Testing Team Dude
  • Offline
  • From: Florida
  • Registered: 2008-10-06
  • Posts: 429

Re: ASUS P5N7A-VM - NVIDIA GeForce 9300 / nForce 730i - SATA Problem

OverFlow wrote:

if the device does not have legacy support then you MUST add the registry entries to the Hive... (Thanks nvidia)

I'm not understanding how and when to actually add the reg changes...

I'm also not understanding how nLite managed to work with the drivers... do they add the reg changes you're referencing?

Last edited by compstuff (2009-10-21 10:42:14)

  • OverFlow
  • DriverPacks Administrator & BASE Developer
  • Offline
  • From: Cincinnati
  • Registered: 2006-12-02
  • Posts: 6,730

Re: ASUS P5N7A-VM - NVIDIA GeForce 9300 / nForce 730i - SATA Problem

directions provided by cdob in post # 4 of that thread

http://forum.driverpacks.net/viewtopic. … 325#p30325

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

OverFlow's Website

  • compstuff
  • DriverPacks Wizard & Testing Team Dude
  • Offline
  • From: Florida
  • Registered: 2008-10-06
  • Posts: 429

Re: ASUS P5N7A-VM - NVIDIA GeForce 9300 / nForce 730i - SATA Problem

OK so I copy his code:

copy setupreg.hiv setupreg.hiv.%random%.sav

reg.exe unload HKLM\loaded_SYSTEM
reg.exe load HKLM\loaded_SYSTEM setupreg.hiv

reg.exe add "HKLM\loaded_SYSTEM\ControlSet001\Services\nvgts\Parameters\PnpInterface" /f /t REG_DWORD /v "5" /d 1 
reg.exe add "HKLM\loaded_SYSTEM\ControlSet001\Services\nvgts5\Parameters\PnpInterface" /f /t REG_DWORD /v "5" /d 1 
reg.exe add "HKLM\loaded_SYSTEM\ControlSet001\Services\nvgts6\Parameters\PnpInterface" /f /t REG_DWORD /v "5" /d 1 
reg.exe add "HKLM\loaded_SYSTEM\ControlSet001\Services\nvgts7\Parameters\PnpInterface" /f /t REG_DWORD /v "5" /d 1 

reg.exe unload HKLM\loaded_SYSTEM.

...and create a setPnpInterfaceNvgts.cmd from it

but where and how do I run it? What does this mean:Try run setPnpInterfaceNvgts.cmd at \I386 directory: ...do I copy the setPnpInterfaceNvgts.cmd to the \I386 directory and then "run it" at some point during the install?

Last edited by compstuff (2009-10-21 10:55:13)

  • OverFlow
  • DriverPacks Administrator & BASE Developer
  • Offline
  • From: Cincinnati
  • Registered: 2006-12-02
  • Posts: 6,730

Re: ASUS P5N7A-VM - NVIDIA GeForce 9300 / nForce 730i - SATA Problem

you do this in the I386 folder of your source either before or after you add the mass storage drivers with DriverPacks BASE... (before you create the ISO)

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

OverFlow's Website

  • compstuff
  • DriverPacks Wizard & Testing Team Dude
  • Offline
  • From: Florida
  • Registered: 2008-10-06
  • Posts: 429

Re: ASUS P5N7A-VM - NVIDIA GeForce 9300 / nForce 730i - SATA Problem

OverFlow wrote:

you do this in the I386 folder of your source either before or after you add the mass storage drivers with DriverPacks BASE... (before you create the ISO)

What is this actually doing to the installation ISO... I don't understand what changes it's making...

Does this make any changes or have any effect on the host system where I am actually creating my integration and ISO ...sorry if
these are dumb questions... maybe I am a little shot from this particular round since I can't get anything to work the way I expect

Last edited by compstuff (2009-10-21 11:54:37)

  • OverFlow
  • DriverPacks Administrator & BASE Developer
  • Offline
  • From: Cincinnati
  • Registered: 2006-12-02
  • Posts: 6,730

Re: ASUS P5N7A-VM - NVIDIA GeForce 9300 / nForce 730i - SATA Problem

since your source has not yet been installed there is no registry... (yet)

The target machines initial registry is created during the install from hive files like setupreg.hiv.

to create or delete a registry entry, before windows is installed, the Hive must be modified...

this is done with regedit... Load the hive file, mod the hive file, save the hive file.

this does not affect anything except the setupreg.hiv file loaded from your source.

Please note the first command is making a backup "copy" of this file...

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

OverFlow's Website

  • compstuff
  • DriverPacks Wizard & Testing Team Dude
  • Offline
  • From: Florida
  • Registered: 2008-10-06
  • Posts: 429

Re: ASUS P5N7A-VM - NVIDIA GeForce 9300 / nForce 730i - SATA Problem

OK.. here is my latest update:
I created my new source files/folders and copied the setPnpInterfaceNvgts.cmd to the \I386 directory. I ran the command. I copied my drivers to $OEM$\Drivers\NVIDIA,  then modified my WINNT.SIF

OemPnPDriversPath="Drivers\NVIDIA\sataraid;Drivers\NVIDIA\sata_ide"
OemPreinstall=Yes
DriverSigningPolicy=Ignore
NonDriverSigningPolicy=Ignore

Then I integrated the driverpacks including the massstorage that I modified with the new NV7 drivers.
The system copied the files, formated the drive, copied the files, booted to XP for a second and then BSOD

Last edited by compstuff (2009-10-21 18:47:39)

  • compstuff
  • DriverPacks Wizard & Testing Team Dude
  • Offline
  • From: Florida
  • Registered: 2008-10-06
  • Posts: 429

Re: ASUS P5N7A-VM - NVIDIA GeForce 9300 / nForce 730i - SATA Problem

Still trying to figure this out and looking for any errors I may have made:
When I ran setPnpInterfaceNvgts.cmd I noticed this and wondered if it was OK:
C:\Y\!Slipstream\_XPBuilds\_10-14-09\P5N7A-VM-DP\I386>copy setupreg.hiv setupreg.hiv.3065.sav
        1 file(s) copied.

C:\Y\!Slipstream\_XPBuilds\_10-14-09\P5N7A-VM-DP\I386>reg.exe unload HKLM\loaded_SYSTEM

Error:  The parameter is incorrect.
All other lines completed successfully

I have two additional questions:
1) How does nLite add the drivers without adding or going through the reg file changes?

This next one is the same question from the other thread you directed me to follow:
2) Can I integrate the driver with nLite and also use Driverpack to add the rest of the drivers? kambing said he tried it and it didn't work! Any idea?

Last edited by compstuff (2009-10-22 00:17:12)

  • compstuff
  • DriverPacks Wizard & Testing Team Dude
  • Offline
  • From: Florida
  • Registered: 2008-10-06
  • Posts: 429

Re: ASUS P5N7A-VM - NVIDIA GeForce 9300 / nForce 730i - SATA Problem

From the other thread ATechGuy said the following is needed... should I modify the HIVESYS.INF???

open i386\HIVESYS.INF in a text editor
under: 
Code:
HKLM,"SYSTEM\CurrentControlSet\Services\ultra\Parameters\PnpInterface","5",0x00010003,1
add:
Code:
HKLM,"SYSTEM\CurrentControlSet\Services\nvgts","ErrorControl",0x00010003,1
HKLM,"SYSTEM\CurrentControlSet\Services\nvgts","Group",0x00000002,"SCSI miniport"
HKLM,"SYSTEM\CurrentControlSet\Services\nvgts","Start",0x00010003,4
HKLM,"SYSTEM\CurrentControlSet\Services\nvgts","Tag",0x00010003,60
HKLM,"SYSTEM\CurrentControlSet\Services\nvgts","Type",0x00010003,1
HKLM,"SYSTEM\CurrentControlSet\Services\nvgts\Parameters",,0x00000012
HKLM,"SYSTEM\CurrentControlSet\Services\nvgts\Parameters\PnpInterface","5",0x00010003,1
save and exit
  • compstuff
  • DriverPacks Wizard & Testing Team Dude
  • Offline
  • From: Florida
  • Registered: 2008-10-06
  • Posts: 429

Re: ASUS P5N7A-VM - NVIDIA GeForce 9300 / nForce 730i - SATA Problem

compstuff wrote:

From the other thread ATechGuy said the following is needed... should I modify the HIVESYS.INF???

open i386\HIVESYS.INF in a text editor
under: 
Code:
HKLM,"SYSTEM\CurrentControlSet\Services\ultra\Parameters\PnpInterface","5",0x00010003,1
add:
Code:
HKLM,"SYSTEM\CurrentControlSet\Services\nvgts","ErrorControl",0x00010003,1
HKLM,"SYSTEM\CurrentControlSet\Services\nvgts","Group",0x00000002,"SCSI miniport"
HKLM,"SYSTEM\CurrentControlSet\Services\nvgts","Start",0x00010003,4
HKLM,"SYSTEM\CurrentControlSet\Services\nvgts","Tag",0x00010003,60
HKLM,"SYSTEM\CurrentControlSet\Services\nvgts","Type",0x00010003,1
HKLM,"SYSTEM\CurrentControlSet\Services\nvgts\Parameters",,0x00000012
HKLM,"SYSTEM\CurrentControlSet\Services\nvgts\Parameters\PnpInterface","5",0x00010003,1
save and exit

WOW!!!!!! The changes to the HIVESYS.INI file seemed to have done the trick and the disk is FINALLY installing big_smile
I will finish the install and report back plus now I have some questions on how to proceed from here with the creation of "generic" install disks...