• scp2008
  • DriverPacks newbie
  • Offline
  • Registered: 2009-04-09
  • Posts: 1

Topic: Keyboard Regional Settings not show on XP install after adding DP's

Hi all,

Just created a new XP install cd with the wonderful driverpacks. How ever I am finding a strange issue where the install of windows is not showing the options page for the regional settings (keyboard layout) and installing in the default USA keyboard layout.

Tested on both XP SP2 and XP SP3 (slipstreamed) media.

I used nLite to intergrate SP3 and to create the ISO (choose no other options in nlite) and I had slipstreamed SP3 before adding DP.

Burnt the version of XP SP3 that did not have the DP's and that correctly showed the regional settings options.

Here is how I used DP Base to setup my CD

1) choose installation platfrom : Disk
2) Choose ALL DP's
3) Method 2
4) Tried Via GUIRunOnce and RunOnceEx both had same issue. (when using Ex left default start ID)
5) Enabled KTD for ALL DP's
6) Enable QSC (Fresh download)
7) Disabled CCP and Nvidia CP
8) Slipstreamed
9) used nLite to create a bootable cd.

Any suggestions on what I need to look at would be appricated

Thanks

-- DPs_Base logfile --
2009-04-09 07:56:24 : <INIT> DriverPacks BASE 8.12.4 initialized.
2009-04-09 07:56:24 : <INIT> Host environment: WIN_VISTA Service Pack 1 on X64 CPU.
2009-04-09 07:56:24 : <INIT> Created temporary working directory.
2009-04-09 07:56:24 : <INIT> Imported proxy settings from Internet Explorer.
2009-04-09 07:56:24 : <INIT> Start scanning for DriverPacks for the wnt5_x86-32 platform.
2009-04-09 07:56:24 : <INIT>     Detected DriverPack Chipset 902!
2009-04-09 07:56:24 : <INIT>     Detected DriverPack CPU 804!
2009-04-09 07:56:24 : <INIT>     Detected DriverPack Graphics A 8121!
2009-04-09 07:56:24 : <INIT>     Detected DriverPack Graphics B 8121!
2009-04-09 07:56:24 : <INIT>     Detected DriverPack Graphics C 8121!
2009-04-09 07:56:24 : <INIT>     Detected DriverPack LAN 8121!
2009-04-09 07:56:24 : <INIT>     Detected DriverPack MassStorage 901!
2009-04-09 07:56:24 : <INIT>     Detected DriverPack Sound A 805!
2009-04-09 07:56:24 : <INIT>     Detected DriverPack Sound B 805!
2009-04-09 07:56:24 : <INIT>     Detected DriverPack WLAN 806!
2009-04-09 07:56:24 : <INIT>     Could not detect any 3rd party DriverPacks for wnt5_x86-32.
2009-04-09 07:56:24 : <INIT>     Finished scanning.
2009-04-09 07:56:24 : <INIT> Detected settings file "D:\ImageBuildArea\Driverpack.net\base\DPs_BASE.ini".
2009-04-09 07:56:24 : <INIT> No OS could be detected.
2009-04-09 07:56:24 : <INIT> Imported settings from settings file.
2009-04-09 07:56:24 : <INIT> [Settings]\DPsMethod not specified: default (2) was set.
2009-04-09 07:56:24 : <INIT> [Settings]\finisherMethod not specified: default (GUIRunOnce) was set.
2009-04-09 07:56:24 : <INIT> [OptionalSettings]\KTD not specified: default (none) was set.
2009-04-09 07:56:24 : <INIT> [OptionalSettings]\QSC not specified: default (yes) was set.
2009-04-09 07:56:24 : <INIT> [OptionalSettingsOther]\ATI_cpl not specified: default (None) was set.
2009-04-09 07:56:24 : <INIT> [OptionalSettingsOther]\Nvidia_cpl not specified: default (None) was set.
2009-04-09 07:56:24 : <GUI>  Initialized GUI.
2009-04-09 07:56:24 : <GUI>  Created a list of all available language files.
2009-04-09 07:56:24 : <GUI>  Set the last used language, English, as the GUI language.
2009-04-09 07:56:33 : <GUI>  Changed Windows installation files OR export (depending on the installation platform) location to D:\ImageBuildArea\Windows XP SP3 Drivers.
2009-04-09 07:56:34 : <GUI>  Windows XP Professional -  Retail SP3 detected.
2009-04-09 07:56:34 : <GUI>  wnt5_x86-32_disc is the selected installation platform .
2009-04-09 07:56:49 : <GUI>  Refreshed UpdateChecker with success.
2009-04-09 07:56:50 : <GUI>  Saved settings!
2009-04-09 07:56:50 : <GUI>  Closed GUI.
2009-04-09 07:56:50 : <SEL>  Selected module: mod_slip_wxp_x86-32_disc_m2.
2009-04-09 07:56:52 : <PREP> Removed all attributes from \I386.
2009-04-09 07:56:52 : <PREP> No previous DriverPacks installation found, Prep stage will be skipped
2009-04-09 07:56:52 : <SLIP> QuickStream Cache available for DriverPack MassStorage text mode drivers!
2009-04-09 07:56:54 : <SLIP> Extracted DriverPack MassStorage to a temporary working directory.
2009-04-09 07:56:54 : <SLIP> D:\ImageBuildArea\Driverpack.net\base\QSC\wnt5_x86-32_uni_DP_MassStorage_901_textmode\DriverPack_MassStorage_wnt5_x86-32.ini
2009-04-09 07:56:54 : <SLIP> Processing the files now. This may take a minute.
2009-04-09 07:57:09 : <SLIP> Slipstreamed DP MassStorage text mode drivers using QuickStream Cache.
2009-04-09 07:57:09 : <SLIP> txtsetup.sif Backed-up Successfully
2009-04-09 07:57:09 : <SLIP> dosnet.inf Backed-up Successfully
2009-04-09 07:57:12 : <SLIP> Removed entries from \I386\txtsetup.sif that will be updated.
2009-04-09 07:57:13 : <SLIP> Removed entries from \I386\dosnet.inf that will be updated.
2009-04-09 07:57:35 : <SLIP> Updated \I386\dosnet.inf and \I386\txtsetup.sif to support DP MassStorage text mode drivers.
2009-04-09 07:57:35 : <SLIP> Created necessary directory structure for method 2.
2009-04-09 07:57:35 : <SLIP> Copying files necessary for method 2.
2009-04-09 07:57:35 : <SLIP> Extracted additional files necessary for method 2.
2009-04-09 07:57:35 : <SLIP> expanded setup.ex_ to setuporg.exe
2009-04-09 07:57:35 : <SLIP> SETUP.EX_ Backed-up Successfully
2009-04-09 07:57:35 : <SLIP> Compressed setup.exe to SETUP.EX_.
2009-04-09 07:57:35 : <SLIP> Method 2 setup.ex_ installed
2009-04-09 07:57:35 : <SLIP> Created \I386\presetup.cmd file.
2009-04-09 07:57:35 : <SLIP> Updated \I386\txtsetup.sif to support method 2.
2009-04-09 07:57:36 : <SLIP> Updated \I386\dosnet.inf to support method 2.
2009-04-09 07:57:36 : <SLIP> Copied DriverPack Chipset to \OEM.
2009-04-09 07:57:36 : <SLIP> Copied DriverPack CPU to \OEM.
2009-04-09 07:57:36 : <SLIP> Copied DriverPack Graphics A to \OEM.
2009-04-09 07:57:37 : <SLIP> Copied DriverPack Graphics B to \OEM.
2009-04-09 07:57:38 : <SLIP> Copied DriverPack Graphics C to \OEM.
2009-04-09 07:57:38 : <SLIP> Copied DriverPack LAN to \OEM.
2009-04-09 07:57:38 : <SLIP> Copied DriverPack MassStorage to \OEM.
2009-04-09 07:57:38 : <SLIP> Copied DriverPack Sound A to \OEM.
2009-04-09 07:57:39 : <SLIP> Copied DriverPack Sound B to \OEM.
2009-04-09 07:57:40 : <SLIP> Copied DriverPack WLAN to \OEM.
2009-04-09 07:57:40 : <SLIP> Copied DriverPacks to \OEM.
2009-04-09 07:57:40 : <SLIP> Will not slipstream patches, Service Pack 3 was detected.
2009-04-09 07:57:40 : <SLIP> Updated \I386\winnt.sif to support method 2.
2009-04-09 07:57:40 : <SLIP> Updated DPsFnshr.ini to enable KTD for all DriverPacks.
2009-04-09 07:57:40 : <SLIP> Created \$OEM$ directory.
2009-04-09 07:57:40 : <SLIP> Updated \$OEM$\cmdlines.txt to execute ROE.exe.
2009-04-09 07:57:40 : <SLIP> DP_Install_Tool was copied successfully
2009-04-09 07:57:40 : <SLIP> Slipstream finished in 50 seconds.
2009-04-09 07:58:00 : <CLNP> Temporary working directory successfully deleted.
- = DriverPacks BASE ini settings used = -
[General]
; preferred language
prefLang    = "English"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons    = "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI        = "yes"


[Settings]
; disc/bartpe/multibootDisc
instPlatform    = "disc"
; trailing backslash is allowed, but not necessary
location    = "D:\ImageBuildArea\Windows XP SP3 Drivers"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks    = "all"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod    = "2"
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod    = "RunOnceEx"


; you should only add this section if you've set [Settings]\finishMethod to "RunOnceEx"
[RunOnceExSettings]
; custom/default, if not specified: default
startID        = "default"


; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD        = "all"
; <path>, to specify a custom KTD cache location, if not specified: default (%SystemRoot%\DriverPacks)
KTDlocation    = "%SystemRoot%\DriverPacks"
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC        = "yes"
2009-04-09 07:58:00 : <CLNP> Create a DPs_Base.log backup @ D:\ImageBuildArea\Driverpack.net\base\LogFiles\DPs_BASE_09-04-09_07-58.log
2009-04-09 07:58:00 : <CLNP> Program terminated.

  • OverFlow
  • DriverPacks Administrator & BASE Developer
  • Offline
  • From: Cincinnati
  • Registered: 2006-12-02
  • Posts: 6,730

Re: Keyboard Regional Settings not show on XP install after adding DP's

Welcome to DriverPacks scp2008,

This is by design, it is not an error. 
DriverPacks is designed for unattended installs.
The OOBE (regional settings ect) is an attended feature.

DO NOT use KTD...

We do not directly support attended installations with a slipstream disc.
You can however try useing the SAD feature of DriverPacks BASE.
add ONLY mass storage textmode to your image from DriverPacks BASE
use DriverPacks BASE to create a SAD folder
then call SAD from runonce or guirunonce (or run it manually)...


PS excellent details and description thank you so much it makes support so much easier.

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

OverFlow's Website

  • Marge
  • DriverPacks newbie
  • Offline
  • Registered: 2009-08-07
  • Posts: 2

Re: Keyboard Regional Settings not show on XP install after adding DP's

Hello, I encountered the same problem. I understand that this is not an error, and that you do not support attended setups, but please if someone can help me...
I want to be able to select the regional settings and still can insert the drivers (specially the Mass Storage and if it's possible Chipset, CPU and LAN). I could not test your suggestion because the link is dead.
Again, please if someone can help me, please do... smile (for Winxp)

Last edited by Marge (2009-08-07 19:42:32)

  • OverFlow
  • DriverPacks Administrator & BASE Developer
  • Offline
  • From: Cincinnati
  • Registered: 2006-12-02
  • Posts: 6,730

Re: Keyboard Regional Settings not show on XP install after adding DP's

add ONLY mass storage textmode to your image from DriverPacks BASE

I really really hate repeating myself... USE SEARCH
PS that fix is cut and pasted from the response above... did you read it... did you try it?

There are at LEAST an hundred references to attended setup...

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

OverFlow's Website

  • Helmi
  • Moderator & Translator (German)
  • Offline
  • From: Germany
  • Registered: 2006-05-27
  • Posts: 1,799

Re: Keyboard Regional Settings not show on XP install after adding DP's

If you only use MSTM and SAD, you should be fine.

http://d1syubgj0w3cyv.cloudfront.net/cdn/farfuture/AeXmpESLemRyQ4RE-dgdjRhN_hKaXMe7woWjOK2wsnk/perpetual:forever/userbar/moderator-3.png

Coming up next - useful links:
• If you like this project, please support it with your donation!      • Grab your HW info (HWIDs) here!     
• If you are a newbie, be sure to check out the DriverPacks tutorial!     • Here's how to create your own DP!
  • Marge
  • DriverPacks newbie
  • Offline
  • Registered: 2009-08-07
  • Posts: 2

Re: Keyboard Regional Settings not show on XP install after adding DP's

My mistake...
At first, the link that I was talking about was taken from the rc release topic, because it was there that I found about SAD. The link was dead smile
I tryed SAD, but I don't know how to integrate the SAD directory (specially text mode drivers) into windows.
I tryed only the mass storage text mode and it still don't let me to choose regional settings, only the region.
If I cannot make the setup attended, where I can modify and enter the regional and keyboard settings because the unattend.txt is the original...?
Or should I just modify the unnatend.txt?

#edit:
Solved the Mass Storage TextMode, My mistake again....
Srry..
About the unattended part... It is possible?

Last edited by Marge (2009-08-10 22:59:38)

  • OverFlow
  • DriverPacks Administrator & BASE Developer
  • Offline
  • From: Cincinnati
  • Registered: 2006-12-02
  • Posts: 6,730

Re: Keyboard Regional Settings not show on XP install after adding DP's

by adding mass storage textmode only. No changes are made to WINNT.SIF.

If Winnt.sif is not modified then you have a fully attended install... (includeing repair, region, OOBE).

If your functionality is not there then DriverPacks has nothing to do with it...

SAD must be run manually... (run dp_inst_tool.cmd)

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

OverFlow's Website

  • Registered: 2009-07-18
  • Posts: 39

Re: Keyboard Regional Settings not show on XP install after adding DP's

sry what is this "SAD" you are talking about. I dont follow very well.

  • OverFlow
  • DriverPacks Administrator & BASE Developer
  • Offline
  • From: Cincinnati
  • Registered: 2006-12-02
  • Posts: 6,730

Re: Keyboard Regional Settings not show on XP install after adding DP's

Look in the FAQ section of the forum wink or search for SAD big_smile

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

OverFlow's Website