• zilexa
  • DriverPacks Magician
  • Offline
  • Registered: 2006-06-27
  • Posts: 46

Topic: [BUG][Base v90201] [Graphics A 901n2] Ati CCC not installed

On a 780G chipset system: Gigabyte MA78GPM-DS2H (integrated Ati 3200 HD graphics + 128 ddr3).

Driverpacks integrated on a XP SP3 system, integrated in XP SP3 + latest Windows updates.
I've chosen all except graphics C. No KTD, finisher run via runonceex. MassStorage text mode. And ofcourse Method 2.

All went well, the videocard driver was installed correctly. But Ati CCC has not been installed.

Ofcourse I'll add hwids if necessary, but since the ati driver is installed correctly I am not sure if it is necessary.
(btw it is the first time on this system that this driver installed flawlessly. Lots of trouble with this chipset, had to remove cmos battery and discovered I also had to disconnect HDMI cable otherwise when windows starts up, the graphics card will fail and there is a black screen while Windows continues without problems. Strange, changing RAM didn't help. Battery removal to reset bios + disconnect HDMI + install Gigabyte driver cd except CCC first before installing newer driver, helped. But now for the first time it went all well without using the gigabyte cd. Only CCC is missing)


EDIT: just noticed, Graphics A 902n1 released.. will test again (tomorrow evening).

Last edited by zilexa (2009-02-04 10:29:32)

  • OverFlow
  • DriverPacks Administrator & BASE Developer
  • Offline
  • From: Cincinnati
  • Registered: 2006-12-02
  • Posts: 6,730

Re: [BUG][Base v90201] [Graphics A 901n2] Ati CCC not installed

Thanks for reporting!
Probably the best info would be contained in a few select lines of your finisher log wink IE The graphics card's HWID and the section that relates to DriverPack Graphics A from the finisher log would be the best things to put in code tags. Did teh finisher actually run? you didn't say wink

your Title is excellent big_smile ! smile

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

OverFlow's Website

  • From: Cambridgeshire, UK
  • Registered: 2007-01-27
  • Posts: 6,226

Re: [BUG][Base v90201] [Graphics A 901n2] Ati CCC not installed

Yes, try the new nightly 902n1 (catalyst 9.1) and let us know.  If CCC still fails to install then we absolutely need to see your DPsFnshr.log (it contains HWIDs and the DriverPacks Finisher errors).  You'll need two posts to get it all, or you could just email it to me and I'll post the relevant portions.

Also, check your disc source \OEM\ folder for ATICCC.ins.

Read BEFORE you post.  HWID tool   DriverPacks Tutorial   DONATE!
http://driverpacks.net/userbar/admin-1.png
Not all heroes wear capes, some wear Kevlar!
  • zilexa
  • DriverPacks Magician
  • Offline
  • Registered: 2006-06-27
  • Posts: 46

Re: [BUG][Base v90201] [Graphics A 901n2] Ati CCC not installed

Thnx for the compliments but its really not a big deal, in my daily job I am confronted with IT testers who can't learn how to report simple issues.. so I know how frustrating that can be.

OEM folder does have the file ATICCC.ins
This time tested on the same machine with the same Base version v9.02.01 and all Driverpacks, nightly versions if available. Graphics A version 902n1.
My finisher log: DPsFnshr.log

Last edited by zilexa (2009-02-05 07:33:14)

  • From: Cambridgeshire, UK
  • Registered: 2007-01-27
  • Posts: 6,226

Re: [BUG][Base v90201] [Graphics A 901n2] Ati CCC not installed

2009-02-04 20:46:33 : <FLTR> 		! Could not match +infFile"C:\D\G\A1\CX_72271.inf" through the HWID "PCI\VEN_1002&DEV_9610&SUBSYS_D0001458" (original HWID: "PCI\VEN_1002&DEV_9610&SUBSYS_D0001458&REV_00") (1 of 3 +infFiles).
2009-02-04 20:46:33 : <FLTR> 		! Could not match +infFile"C:\D\G\A1\CX_72271.inf" through the HWID "PCI\VEN_1002&DEV_9610&REV_00" (original HWID: "PCI\VEN_1002&DEV_9610&SUBSYS_D0001458&REV_00") (1 of 3 +infFiles).
2009-02-04 20:46:33 : <FLTR> 		! Could not match +infFile"C:\D\G\A1\CX_72271.inf" through the HWID "PCI\VEN_1002&DEV_9610" (original HWID: "PCI\VEN_1002&DEV_9610&SUBSYS_D0001458&REV_00") (1 of 3 +infFiles).

WTF!!! sad
Damn it it's right THERE, how can the DriverPacks Finisher NOT find it!

Maybe the new DriverPacks Finisher is getting confused by the &REV_00 ??

Read BEFORE you post.  HWID tool   DriverPacks Tutorial   DONATE!
http://driverpacks.net/userbar/admin-1.png
Not all heroes wear capes, some wear Kevlar!
  • zilexa
  • DriverPacks Magician
  • Offline
  • Registered: 2006-06-27
  • Posts: 46

Re: [BUG][Base v90201] [Graphics A 901n2] Ati CCC not installed

Might not be useful info but I thought maybe v9.1 CCC didn't support 780G graphics so I downloaded the CCC installer (only contains CCC, no driver, no other app) and installed it, after reboot CCC is available and works just fine.


Mr smartepants, the second line clearly does not match right?

2009-02-04 20:46:33 : <FLTR> ! Could not match +infFile"C:\D\G\A1\CX_72271.inf" through the HWID "PCI\VEN_1002&DEV_9610&REV_00"
(original HWID: "PCI\VEN_1002&DEV_9610&SUBSYS_D0001458&REV_00") (1 of 3 +infFiles).

The first part has &REV_00 where the 2nd part has &SYBSYS_D0001458&REV_00

not sure if thats it..

Last edited by zilexa (2009-02-05 11:05:30)

  • OverFlow
  • DriverPacks Administrator & BASE Developer
  • Offline
  • From: Cincinnati
  • Registered: 2006-12-02
  • Posts: 6,730

Re: [BUG][Base v90201] [Graphics A 901n2] Ati CCC not installed

the hwid is parsed
if you go into device manager and look at details tab
there is a list of "compatable" hwids

these are the "parsed" or "compatable" HWIDs

any parsed id match is good too...

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

OverFlow's Website

  • From: Cambridgeshire, UK
  • Registered: 2007-01-27
  • Posts: 6,226

Re: [BUG][Base v90201] [Graphics A 901n2] Ati CCC not installed

I know on my test systems, the &REV_** (and sometimes the SUBSYS) are ignored, the way they should be when a generic hwid is present.  I just installed on my HD3450 and everything was good.  I just don't understand why DriverPacks Finisher wouldn't pick this up.

Read BEFORE you post.  HWID tool   DriverPacks Tutorial   DONATE!
http://driverpacks.net/userbar/admin-1.png
Not all heroes wear capes, some wear Kevlar!