• From: Atlanta, GA. USA
  • Registered: 2008-09-29
  • Posts: 48

Topic: [SLVD] BASE 810RC3 Problem with BartPE/UBCD4Win Plugin

Greetings from Atlanta, y'all.

Man I almost pulled out ALL my remaining hair to get this to work.

Challenge:
Create a UBCD4Win disc that can boot a new Dell Latitude E5500 laptop, featuring those oh-so-fancy SATA AHCI controllers. This means creating a UBCD4Win plugin so I can build the disk with what I need.

Approach:
Use latest BASE (8.10rc3 is what I have here) and the latest Mass Storage Driver Pack (DP_MassStorage_wnt5_x86-32_810F1.7z). RESULT: Nope

Revised Approach:
Use current BASE 8.05 with same Mass Storage Driver Pack. RESULT: SUCCESS!

Conclusion:
What I assumed was a problem with the new Mass Storage Pack is really an issue with the BASE 8.10rc3.

Just so you know I HAVE been testing your fabulous work.

And it really does work some serious magic for me.

Thanks again for all the fish, and when will the new BASE be released? This month, next, or....?


MARK STRELECKI, ATLANTA GA.

Last edited by markstrelecki (2008-10-18 02:48:09)

markstrelecki's Website

  • OverFlow
  • DriverPacks Administrator & BASE Developer
  • Offline
  • From: Cincinnati
  • Registered: 2006-12-02
  • Posts: 6,730

Re: [SLVD] BASE 810RC3 Problem with BartPE/UBCD4Win Plugin

So glad to be of service...
You did a wonderful job providing details, Thank you.

May I trouble you for just a few more?

which version of UBCD4Win
can you post your HWID's for me
(link for tool in my signature)

well i was going to release it today -
but now i have to go back to the drawing board. big_smile LOL tongue big_smile wink

thanks a million neighbor (you seem to be close to here wink)


Moved to correct forum

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

OverFlow's Website

  • From: Atlanta, GA. USA
  • Registered: 2008-09-29
  • Posts: 48

Re: [SLVD] BASE 810RC3 Problem with BartPE/UBCD4Win Plugin

I love your attitude, thanks for the pleasant response.

I am using the latest UBCD4WIN 3.20.

HWID readout for the Dell Latitude E5500 laptop:

=========== 
PCI Devices 
=========== 
PCI\VEN_1180&DEV_0476&SUBSYS_02631028&REV_BA\4&1A998396&0&08F0: Ricoh R/RL/5C476(II) or Compatible CardBus Controller
PCI\VEN_1180&DEV_0822&SUBSYS_02631028&REV_21\4&1A998396&0&0AF0: SDA Standard Compliant SD Host Controller
PCI\VEN_1180&DEV_0832&SUBSYS_02631028&REV_04\4&1A998396&0&09F0: OHCI Compliant IEEE 1394 Host Controller
PCI\VEN_1180&DEV_0843&SUBSYS_02631028&REV_11\4&1A998396&0&0BF0: Ricoh SD/MMC Host Controller
PCI\VEN_14E4&DEV_1674&SUBSYS_02631028&REV_00\4&2DA1E264&0&00E4: Broadcom NetXtreme 57xx Gigabit Controller
PCI\VEN_14E4&DEV_4315&SUBSYS_000C1028&REV_01\4&84CCC20&0&00E1: Dell Wireless 1397 WLAN Mini-Card
PCI\VEN_8086&DEV_2448&SUBSYS_00000000&REV_92\3&61AAA01&0&F0 : Intel(R) 82801 PCI Bridge - 2448
PCI\VEN_8086&DEV_2919&SUBSYS_00000000&REV_02\3&61AAA01&0&F8 : Intel(R) ICH9M LPC Interface Controller - 2919
PCI\VEN_8086&DEV_2929&SUBSYS_02631028&REV_02\3&61AAA01&0&FA : Intel(R) ICH9M-E/M SATA AHCI Controller
PCI\VEN_8086&DEV_2930&SUBSYS_02631028&REV_02\3&61AAA01&0&FB : Intel(R) ICH9 Family SMBus Controller - 2930
PCI\VEN_8086&DEV_2934&SUBSYS_02631028&REV_02\3&61AAA01&0&E8 : Intel(R) ICH9 Family USB Universal Host Controller - 2934
PCI\VEN_8086&DEV_2935&SUBSYS_02631028&REV_02\3&61AAA01&0&E9 : Intel(R) ICH9 Family USB Universal Host Controller - 2935
PCI\VEN_8086&DEV_2936&SUBSYS_02631028&REV_02\3&61AAA01&0&EA : Intel(R) ICH9 Family USB Universal Host Controller - 2936
PCI\VEN_8086&DEV_2937&SUBSYS_02631028&REV_02\3&61AAA01&0&D0 : Intel(R) ICH9 Family USB Universal Host Controller - 2937
PCI\VEN_8086&DEV_2938&SUBSYS_02631028&REV_02\3&61AAA01&0&D1 : Intel(R) ICH9 Family USB Universal Host Controller - 2938
PCI\VEN_8086&DEV_2939&SUBSYS_02631028&REV_02\3&61AAA01&0&D2 : Intel(R) ICH9 Family USB Universal Host Controller - 2939
PCI\VEN_8086&DEV_293A&SUBSYS_02631028&REV_02\3&61AAA01&0&EF : Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293A
PCI\VEN_8086&DEV_293C&SUBSYS_02631028&REV_02\3&61AAA01&0&D7 : Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293C
PCI\VEN_8086&DEV_293E&SUBSYS_02631028&REV_02\3&61AAA01&0&D8 : Microsoft UAA Bus Driver for High Definition Audio
PCI\VEN_8086&DEV_2940&SUBSYS_00000000&REV_02\3&61AAA01&0&E0 : Intel(R) ICH9 Family PCI Express Root Port 1 - 2940
PCI\VEN_8086&DEV_2942&SUBSYS_00000000&REV_02\3&61AAA01&0&E1 : Intel(R) ICH9 Family PCI Express Root Port 2 - 2942
PCI\VEN_8086&DEV_2948&SUBSYS_00000000&REV_02\3&61AAA01&0&E4 : Intel(R) ICH9 Family PCI Express Root Port 5 - 2948
PCI\VEN_8086&DEV_2A40&SUBSYS_00000000&REV_07\3&61AAA01&0&00 : Mobile Intel(R) 45 Express Chipset Series Processor to DRAM Controller - 2A40
PCI\VEN_8086&DEV_2A42&SUBSYS_02631028&REV_07\3&61AAA01&0&10 : Mobile Intel(R) 4 Series Express Chipset Family
PCI\VEN_8086&DEV_2A43&SUBSYS_02631028&REV_07\3&61AAA01&0&11 : Mobile Intel(R) 4 Series Express Chipset Family
25 matching device(s) found.
 
=========== 
USB Devices 
=========== 
USB\ROOT_HUB\4&1121DEF3&0                                   : USB Root Hub
USB\ROOT_HUB\4&1C6EFE57&0                                   : USB Root Hub
USB\ROOT_HUB\4&248D73&0                                     : USB Root Hub
USB\ROOT_HUB\4&2D9CC754&0                                   : USB Root Hub
USB\ROOT_HUB\4&2FF4ECD&0                                    : USB Root Hub
USB\ROOT_HUB\4&3304F345&0                                   : USB Root Hub
USB\ROOT_HUB20\4&20D1B484&0                                 : USB Root Hub
USB\ROOT_HUB20\4&8AFD7EE&0                                  : USB Root Hub
USB\VID_045E&PID_0047\5&33DC01FA&0&2                        : Microsoft USB IntelliMouse Explorer 3.0
USB\VID_090C&PID_1000\AA04012700007853                      : USB Mass Storage Device
USBSTOR\DISK&VEN_CORSAIR&PROD_FLASH_VOYAGER&REV_1100\AA04012700007853&0: Corsair Flash Voyager USB Device
11 matching device(s) found.
 
============= 
Input Devices 
============= 
HID\VID_045E&PID_0047\6&23FC78A5&0&0000                     : Microsoft USB IntelliMouse Explorer 3.0
1 matching device(s) found.
 
============ 
ACPI Devices 
============ 
ACPI\ACPI0003\2&DABA3FF&0                                   : Microsoft AC Adapter
ACPI\GENUINEINTEL_-_X86_FAMILY_6_MODEL_15\_0                : Intel(R) Core(TM)2 Duo CPU     T7250  @ 2.00GHz
ACPI\GENUINEINTEL_-_X86_FAMILY_6_MODEL_15\_1                : Intel(R) Core(TM)2 Duo CPU     T7250  @ 2.00GHz
ACPI\PNP0000\4&3468AAC5&0                                   : Programmable interrupt controller
ACPI\PNP0100\4&3468AAC5&0                                   : System timer
ACPI\PNP0103\4&3468AAC5&0                                   : High Precision Event Timer
ACPI\PNP0200\4&3468AAC5&0                                   : Direct memory access controller
ACPI\PNP0303\4&3468AAC5&0                                   : Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
ACPI\PNP0501\1                                              : Communications Port (COM1)
ACPI\PNP0800\4&3468AAC5&0                                   : System speaker
ACPI\PNP0A03\2&DABA3FF&0                                    : PCI bus
ACPI\PNP0B00\4&3468AAC5&0                                   : System CMOS/real time clock
ACPI\PNP0C01\1                                              : System board
ACPI\PNP0C01\2                                              : System board
ACPI\PNP0C01\3                                              : System board
ACPI\PNP0C01\4                                              : System board
ACPI\PNP0C01\5                                              : System board
ACPI\PNP0C04\4&3468AAC5&0                                   : Numeric data processor
ACPI\PNP0C09\0                                              : Microsoft ACPI-Compliant Embedded Controller
ACPI\PNP0C0A\1                                              : Microsoft ACPI-Compliant Control Method Battery
ACPI\PNP0C0C\2&DABA3FF&0                                    : ACPI Power Button
ACPI\PNP0C0D\2&DABA3FF&0                                    : ACPI Lid
ACPI\PNP0C0E\2&DABA3FF&0                                    : ACPI Sleep Button
ACPI\PNP0C14\0                                              : Microsoft Windows Management Interface for ACPI
ACPI\PNP0F13\4&3468AAC5&0                                   : PS/2 Compatible Mouse
ACPI\THERMALZONE\THM_                                       : ACPI Thermal Zone
ACPI_HAL\PNP0C08\0                                          : Microsoft ACPI-Compliant System
ROOT\ACPI_HAL\0000                                          : ACPI Multiprocessor PC
28 matching device(s) found.

thank you for your attention as well as your technical chops. I salute y'all.

I just may have relatives I didn't know about up in your part of the lower 48. Who knows?

Apologies for: posting location.  I wanted you to have this info ASAP, especially knowing you want to go RTM on the new build.

I hope to chat with you again soon, and best wishes from ALL the Streleckis. <grin!>

MARK STRELECKI, ACP

Last edited by markstrelecki (2008-10-19 06:40:43)

markstrelecki's Website

  • OverFlow
  • DriverPacks Administrator & BASE Developer
  • Offline
  • From: Cincinnati
  • Registered: 2006-12-02
  • Posts: 6,730

Re: [SLVD] BASE 810RC3 Problem with BartPE/UBCD4Win Plugin

Well i may have figured this out...

It seems that there was a bug in the sortarray function of autoit i was useing for the 809/810 series releases

the Array that gets written to the massstorage.inf was being written raw instead of sorted.
the sort order of the entries is only an issue in certain cases and I belive yours may be one of those cases.
keep your eyes peeled for my next RC.

i had/have a bug in the finisher that needs to be confirmed as fixed first.

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

OverFlow's Website

  • OverFlow
  • DriverPacks Administrator & BASE Developer
  • Offline
  • From: Cincinnati
  • Registered: 2006-12-02
  • Posts: 6,730

Re: [SLVD] BASE 810RC3 Problem with BartPE/UBCD4Win Plugin

that didn't take long...  here you go

http://driverpacks.sytes.net/driverpack … 1102RC.exe

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

OverFlow's Website

  • From: Atlanta, GA. USA
  • Registered: 2008-09-29
  • Posts: 48

Re: [SLVD] BASE 810RC3 Problem with BartPE/UBCD4Win Plugin

Thank you kindly for the DP Base update - I checked it and it seems to work OK for making a S.A.D. disk. I will duplicate prior testing parameters later.

BUT....

In the file named "DP_Install_Tool.cmd" the spelling of the word Preparing is incorrect ("Prepareing").

Yeah, I know. Nitpicker. What can I say - I call 'em like I see 'em.

Y'all have a GREAT technology and it works wonderfully well to make those other tools we Digital Warriors need every day.

As soon as this economy shakes loose, I'm sending part of it back to you all as tribute for jobs well done!

Best wishes from another soldier on the front line of the technology wars.


MARK STRELECKI
Atlanta, GA. USA
"I Make It Go."

markstrelecki's Website

  • OverFlow
  • DriverPacks Administrator & BASE Developer
  • Offline
  • From: Cincinnati
  • Registered: 2006-12-02
  • Posts: 6,730

Re: [SLVD] BASE 810RC3 Problem with BartPE/UBCD4Win Plugin

Yeah mr_smartepants is a nitpicker too -
- he pointed that out about a week ago in the testing team forum

Always glad to have a few of you guys around to keep me from cutting corners wink

let me know if the bartpe issue is fixed so in can put this one in the solved stack big_smile

Perhaps we should report that typo over at the bugtracker LOL smile

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

OverFlow's Website

  • JakeLD
  • Moderator, Sysprep & BartPE Master
  • Offline
  • From: Montreal, Canada
  • Registered: 2007-07-05
  • Posts: 872

Re: [SLVD] BASE 810RC3 Problem with BartPE/UBCD4Win Plugin

My bro has the exact same bug, testing right now.

Read BEFORE you post  HWID's Tool  DriverPacks tutorial  DriverForge & FindHWIDs

http://d1syubgj0w3cyv.cloudfront.net/cdn/farfuture/n4W97qgvXb9IR64MNwT_BbnsRgjGDd0hpeGIqqmpZZ0/perpetual:forever/userbar/team-2.png

Donate!

JakeLD's Website

  • From: Atlanta, GA. USA
  • Registered: 2008-09-29
  • Posts: 48

Re: [SLVD] BASE 810RC3 Problem with BartPE/UBCD4Win Plugin

Mark Strelecki, Atlanta, GA. reporting as ordered, Sir! <grin>

OK, here's what I did.

I used DPs_BASE_81102RC and DP_MassStorage_wnt5_x86-32_810H.7z and I was SUCCESSFUL in creating a UBCD4Win/BartPE plugin. I then used UBCD4Win (current version) to author a new ISO and it worked without complaint.

So, I guess this one does get to move to the DONE stack. And well done it was! Thank you again.

I noticed that when I made the plugin previously, I must have specified all DriverPacks because the Base folder in the plugin folder has a Driver Packs folder with ALL the .7z files in it. If they aren't being used, why are they being copied to the BartPE/UBCD4Win plugin location? And would it be better that IF we decide to make a BartPE plugin that ONLY the DriverPacks that are compatible show as available options on the page we select them from? And when I regenerate the plugin, I'm asked if I want to delete the BASE, but the existing DriverPacks are not deleted or the user asked if they should be deleted. Curious minds NEED to know these things.

So, when might other Driver Packs be made to work as BartPE/UBCD4Win plugins (if ever), and when will the next Base version and all the updated DriverPacks be released? And what about the Vista Generation - do you think there will be a BartPE/UBCD4Win that works on the Windows 6 platform, or will y'all just do the driver support thing for tools like Vlite (Vista version of nLite)?

(Those Southerners are NEVER satisfied, darnit.)

If there is anything else you need from this corner, just holler. I'm happy to help you advance your technology and make it work so I have a great tool in my own Bag of Tricks. (Actually I call it my Utility Belt, but that's just me.....)

Best wishes from sunny and warm Springtime in Atlanta, GA. USA.


MARK STRELECKI

markstrelecki's Website

  • OverFlow
  • DriverPacks Administrator & BASE Developer
  • Offline
  • From: Cincinnati
  • Registered: 2006-12-02
  • Posts: 6,730

Re: [SLVD] BASE 810RC3 Problem with BartPE/UBCD4Win Plugin

Re: So, when might other Driver Packs be made to work as BartPE/UBCD4Win plugins (if ever)

Did you even LOOK at the version i just gave you... wink (Or the one that you reported on above) wink tongue

i deliver sheet before he even askes for it and he still ain't happy! (Never Satisfied i tell ya)
LOL

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

OverFlow's Website

  • From: Atlanta, GA. USA
  • Registered: 2008-09-29
  • Posts: 48

Re: [SLVD] BASE 810RC3 Problem with BartPE/UBCD4Win Plugin

Greets from Atlanta, GA.

Haven't heard very much about y'all's progress for the BASE or Packs other than Graphics.

So, "How ya doin'?"

High fives to all of you for keeping up on a monumental undertaking, to say the least.

Much respect and more anticipation from a Big Fan down south!

Thank you and have a Happy Thanksgiving.

markstrelecki's Website

  • OverFlow
  • DriverPacks Administrator & BASE Developer
  • Offline
  • From: Cincinnati
  • Registered: 2006-12-02
  • Posts: 6,730

Re: [SLVD] BASE 810RC3 Problem with BartPE/UBCD4Win Plugin

the latest volley of drivers from intel nvidia and ati was just awful... by far the worst we have ever seen...

Mr_smartepants busted his tail to get the graphics packs out and we are feverisshly working on mass... i assume chipset and sound will follow. again the boys have just done their worst this time around and we get left with junk to try and make work...

We only have a handful of guys to sort through the hundreds of new releases and try to add them.
So it takes time and patience and motivation. thanks for helping with the motivation part!

jeff

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

OverFlow's Website