• Registered: 2008-09-14
  • Posts: 2

Topic: [REQ] Supermicro PDSME+

Hi, I have a Supermicro PDSME+ motherboard and I'm using the Adaptec RAID feature built into the motherboard along with Seagate SATA Drives. The configuration of the drives is RAID 1 (Mirroring). I am using UBCD4WIN 3.20 with the latest driver pack. For some reason the drive array is not being detected. 
I posted this question on ubcd4win and was asked to post here as well.  Thanks for helping!

Here is the output using devcon:

X:\I386\System32>devcon hwids *CC_01* *Raid* *SCSI*
PCI\VEN_8086&DEV_27C3&SUBSYS_918015D9&REV_01\3&61AAA01&0&FA
Name: RAID Controller
Hardware ID's:
PCI\VEN_8086&DEV_27C3&SUBSYS_918015D9&REV_01
PCI\VEN_8086&DEV_27C3&SUBSYS_918015D9
PCI\VEN_8086&DEV_27C3&CC_010400
PCI\VEN_8086&DEV_27C3&CC_0104
Compatible ID's:
PCI\VEN_8086&DEV_27C3&REV_01
PCI\VEN_8086&DEV_27C3
PCI\VEN_8086&CC_010400
PCI\VEN_8086&CC_0104
PCI\VEN_8086
PCI\CC_010400
PCI\CC_0104
PCI\VEN_8086&DEV_27DF&SUBSYS_918015D9&REV_01\3&61AAA01&0&F9
Name: IDE Controller
Hardware ID's:
PCI\VEN_8086&DEV_27DF&SUBSYS_918015D9&REV_01
PCI\VEN_8086&DEV_27DF&SUBSYS_918015D9
PCI\VEN_8086&DEV_27DF&CC_01018A
PCI\VEN_8086&DEV_27DF&CC_0101
Compatible ID's:
PCI\VEN_8086&DEV_27DF&REV_01
PCI\VEN_8086&DEV_27DF
PCI\VEN_8086&CC_01018A
PCI\VEN_8086&CC_0101
PCI\VEN_8086
PCI\CC_01018A
PCI\CC_0101
2 matching device(s) found.

X:\I386\System32>

  • OverFlow
  • DriverPacks Administrator & BASE Developer
  • Offline
  • From: Cincinnati
  • Registered: 2006-12-02
  • Posts: 6,730

Re: [REQ] Supermicro PDSME+

yup that is a standard intel chipset...

try the nightly (test release) here... 
http://dev.driverpacks.thesneaky.com/dr … 32_809C.7z

please, let us know if that works for you

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

OverFlow's Website

  • Registered: 2008-09-14
  • Posts: 2

Re: [REQ] Supermicro PDSME+

Hi, thanks for the reply. 
I did try the release but it did not work.  I only way I did get it to work is by disabling the DriverPack and placing the driver under SCSIAdapters\AdapICH7R (using UBCD4WIN) which is not the preferred method.

  • OverFlow
  • DriverPacks Administrator & BASE Developer
  • Offline
  • From: Cincinnati
  • Registered: 2006-12-02
  • Posts: 6,730

Re: [REQ] Supermicro PDSME+

can we ahve a link to the driver that did work for you?

\

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

OverFlow's Website

  • cdob
  • DriverPacks Guru
  • Offline
  • Registered: 2006-08-13
  • Posts: 270

Re: [REQ] Supermicro PDSME+

@goldberghere
Do you use this drivers?
ftp://ftp.supermicro.com/CDR-PD_1.31_fo … ows/WIN32/

ftp://ftp.supermicro.com/CDR-PD_1.31_fo … tsetup.oem

[HardwareIds.scsi.ADAPTEC_AHCIRAID]
# Intel
id = "PCI\VEN_8086&DEV_2652", "adpahci"
id = "PCI\VEN_8086&DEV_27C3", "adpahci"

Help, Adaptec uses generic Intel HardwareIDs.

  • OverFlow
  • DriverPacks Administrator & BASE Developer
  • Offline
  • From: Cincinnati
  • Registered: 2006-12-02
  • Posts: 6,730

Re: [REQ] Supermicro PDSME+

yikes ! ! !
adaptec and intel shareing hwids now...

sadness...

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

OverFlow's Website

  • JakeLD
  • Moderator, Sysprep & BartPE Master
  • Offline
  • From: Montreal, Canada
  • Registered: 2007-07-05
  • Posts: 872

Re: [REQ] Supermicro PDSME+

Same for D4 folder....damn adaptec.

Read BEFORE you post  HWID's Tool  DriverPacks tutorial  DriverForge & FindHWIDs

http://d1syubgj0w3cyv.cloudfront.net/cdn/farfuture/n4W97qgvXb9IR64MNwT_BbnsRgjGDd0hpeGIqqmpZZ0/perpetual:forever/userbar/team-2.png

Donate!

JakeLD's Website