You are not logged in. Please login or register.
DriverPacks.net Forum » DriverPack Mass Storage » [BSOD] 0x0000007B Error with MassStorage 8.02.1 (Si3112a, NF7-S v2.0)
I hope all goes well... and you have a speedy recovery.
thanks for the mass storage fixes - you da man...
maybe we need to make your title Mass Master 
Wishing good health and speed recovery to you Jaak!
that experiment with N-TM is no longer in
I have No fix for intel ACPI
happy testing.
Today I get some surgery..
it's Intel(R) 82801HEM/HBM SATA AHCI Controller
I post link for driver.....
tpoday I had same probleme with netbook "leneva 3000 N200 0769-a43) with same chipset......I used same cd ceated by nlite to resolve probleme.....
I will post all you want that can help you o fix this bug.
( Link Killed ) DP_MassStorage_wnt5_x86-32_803RC3.7z[/url]
[N-TM] loads after other Nvidia
[N-TM] contains the two abit HWIDs (again)
INI Fixes by Overflow for server and windows 2000.
INI fix for Symmpi for XP.
INI fix for [N-6] by OverFlow
S8A, Silicon removed
V3, Via updated
Silicon sections now in THREE blocks so that a user can easily move these around or remove these from INI.
Silicon image load order changed
first softraid, then raid, then base-ide
I cannot fix AHCI. (your driver and ours have same HWIDs)
Do NOT re-stream an old source.
Use a fresh copy of a source you have not yet used DriverPacks on.
Make another copy of that to fall back to..
Now, if this testpack does not work, I will ask you do the following.
Unpack this testfile.
Replace content of D\M\i3 with the intel driver from HP (sp36132 has version 7.5.0.1017 and our pack has 7.8.0.1012)
You don't have to edit the INI section for it since they have the same HWIDs.
Then recompress. (select INI and D, rightclick to run 7zip)
7z, lzma, 256wordLength, compact.
Use the changed file to restream the source you used (there was no change to INI.. so this will correctly replace the mass storage pack)
Test.
And if THAT works, I will want to know.
If I hear that other users have issues with version 7.8.0.1012 I could roll back to 7.5.0.1017
Last edited by Jaak (2008-03-30 03:29:34)
Do NOT re-stream an old source.
Use a fresh copy of a source you have not yet used DriverPacks on.
Make another copy of that to fall back to..
Now, if this testpack does not work, I will ask you do the following.
Unpack this testfile.
Replace content of D\M\i3 with the intel driver from HP (sp36132 has version 7.5.0.1017 and our pack has 7.8.0.1012)
You don't have to edit the INI section for it since they have the same HWIDs.
Then recompress. (select INI and D, rightclick to run 7zip)
7z, lzma, 256wordLength, compact.
Use the changed file to restream the source you used (there was no change to INI.. so this will correctly replace the mass storage pack)Test.
And if THAT works, I will want to know.
If I hear that other users have issues with version 7.8.0.1012 I could roll back to 7.5.0.1017
I always use fresh from XP SP2 (not modified)
I make 4 tests with methode one and methode 2 with "hp 6820S" and "LENOVO 300 n200"
I will try what yoy say tomorow if i have another PC !!
thanks !!
links to mass storage testpacks were pulled while I was testing pre-beta-base and for many hours I thought the mass storage testpack was behaving extrememely erratic. (erm.. it was not an official mass storage testpack yet, anyhow)
Mass 803RC3 is on line again
Hi
same probleme with Acer extensa 5620 http://support.acer-euro.com/drivers/no … _5620.html
I use the same cd created with nLite !!
I think that's version 7.5 is better than 7.8....but i am not sure
Powered by PunBB, supported by Informer Technologies, Inc.
Currently installed 3 official extensions. Copyright © 2003–2009 PunBB.
[ Generated in 0.019 seconds, 10 queries executed ]
