[BSOD] 0x0000007B Error with MassStorage 7.12 (Si3112r, ATI SB450) (Page 2 of 6)

I just got that.
I compared it against the other drivers.
The HWIDs list is an exact match with silicon's driver for Bios 4x83.
(which is a much shorter list than what is in 1.1.56.1)

can you get to the setupapi.log in the windows folder and post the portions related to the si3112 you could put th ewhole thing here but it will take at least three posts

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!

The DriverPacks, the DP_Base program, and Support Forum are FREE!.

I'm not running any type of RAID array although the drivers are available on my system. I think the Si3112r drivers kill two birds in one stone by providing functionality for both isolated SATA and or RAID configurations.

Where is the "X84 driver" from Silicon? Could you please provide a link?

Well, here's all of my system's HWIDS:

=========== 
PCI devices 
=========== 
 
 
PCI\VEN_1002&DEV_4370&SUBSYS_310015BD&REV_80\3&18D45AA6&0&A5: Realtek AC'97 Audio
PCI\VEN_1002&DEV_4371&SUBSYS_00000000&REV_80\3&18D45AA6&0&A4: ATI I/O Communications Processor PCI Bus Controller
PCI\VEN_1002&DEV_4372&SUBSYS_100915BD&REV_81\3&18D45AA6&0&A0: ATI I/O Communications Processor SMBus Controller
PCI\VEN_1002&DEV_4373&SUBSYS_43731002&REV_80\3&18D45AA6&0&9A: ATI I/O Communications Processor USB 2.0 EHCI controller
PCI\VEN_1002&DEV_4374&SUBSYS_43741002&REV_80\3&18D45AA6&0&98: ATI I/O Communications Processor USB 1.1 OHCI controller
PCI\VEN_1002&DEV_4375&SUBSYS_43751002&REV_80\3&18D45AA6&0&99: ATI I/O Communications Processor USB 1.1 OHCI controller
PCI\VEN_1002&DEV_4376&SUBSYS_100715BD&REV_80\3&18D45AA6&0&A1: Standard Dual Channel PCI IDE Controller
PCI\VEN_1002&DEV_4377&SUBSYS_43771002&REV_80\3&18D45AA6&0&A3: ATI I/O Communications Processor LPC Controller
PCI\VEN_1002&DEV_4379&SUBSYS_43791002&REV_80\3&18D45AA6&0&90: ATI 4379 Serial ATA Controller
PCI\VEN_1002&DEV_437A&SUBSYS_437A1002&REV_80\3&18D45AA6&0&88: ATI 437A Serial ATA Controller
PCI\VEN_1002&DEV_5950&SUBSYS_59501002&REV_10\3&18D45AA6&0&00: PCI standard host CPU bridge
PCI\VEN_1002&DEV_5974&SUBSYS_100215BD&REV_00\4&152EA2CB&0&2808: RADEON XPRESS 200 Series (Microsoft Corporation - WDDM)  
PCI\VEN_1002&DEV_5A3F&SUBSYS_5A3F1002&REV_00\3&18D45AA6&0&08: PCI standard PCI-to-PCI bridge
PCI\VEN_1022&DEV_1100&SUBSYS_00000000&REV_00\3&18D45AA6&0&C0: AMD HyperTransport(tm) Configuration
PCI\VEN_1022&DEV_1101&SUBSYS_00000000&REV_00\3&18D45AA6&0&C1: AMD Address Map Configuration
PCI\VEN_1022&DEV_1102&SUBSYS_00000000&REV_00\3&18D45AA6&0&C2: AMD DRAM and HyperTransport(tm) Trace Mode Configuration
PCI\VEN_1022&DEV_1103&SUBSYS_00000000&REV_00\3&18D45AA6&0&C3: AMD Miscellaneous Configuration
PCI\VEN_10EC&DEV_8169&SUBSYS_100A15BD&REV_10\4&28C87A37&0&50A4: Realtek RTL8169/8110 Family PCI Gigabit Ethernet NIC (NDIS 6.0)
PCI\VEN_1106&DEV_3044&SUBSYS_100615BD&REV_80\4&28C87A37&0&48A4: VIA OHCI Compliant IEEE 1394 Host Controller
PCI\VEN_14E4&DEV_4318&SUBSYS_03551154&REV_02\4&28C87A37&0&28A4: Broadcom 802.11g Network Adapter
20 matching device(s) found.
 
 
=========== 
USB devices 
=========== 
 
USB\ROOT_HUB\4&171A4252&0                                   : USB Root Hub
USB\ROOT_HUB\4&249291E9&0                                   : USB Root Hub
USB\ROOT_HUB20\4&3B1D26D3&0                                 : USB Root Hub
USB\VID_03F0&PID_6204\MY3C84J2V77A                          : USB Printing Support
USBPRINT\HPDESKJET_5100\6&2D3E044D&0&USB001                 : HP Deskjet 5150 series
5 matching device(s) found.

hehe, Silicon updated the site.. the x.83 /x.84 reference mixup no longer exists.
All pages say x.84 now (driver page ands BIOS DL page it linked to mentioned a different version once.)

Now, if this latest Silicon driver works for usficcient, then we still have to find out what we must do for the fairly long list of silicon/ATI hwids it misses.
(updates often drop support for older HWIDs. The Silicon originals never had many for ATI. There are quite a few HWIDS missing if I only use this one...)

well, at least BAM does not have a problem device
these are HARD drive firmware IDs the driver has problems on.

ObsProblemDev1Name="ST330013AS  108b"
ObsProblemDev2Name="ST330013AS  1.20"

ProblemDev1Name="Maxtor 4D060H3 DAK05GK0"
ProblemDev1Value="MaxMode = UDMA-5"

ProblemDev2Name="ST320012AS"
ProblemDev2Value="Mod15Write"

ProblemDev3Name="ST330013AS"
ProblemDev3Value="Mod15Write"

ProblemDev4Name="ST340017AS"
ProblemDev4Value="Mod15Write"

ProblemDev5Name="ST360015AS"
ProblemDev5Value="Mod15Write"

ProblemDev6Name="ST380023AS"
ProblemDev6Value="Mod15Write"

ProblemDev7Name="ST3120023AS"
ProblemDev7Value="Mod15Write"

ProblemDev8Name="ST340014ASL"
ProblemDev8Value="Mod15Write"

ProblemDev9Name="ST360014ASL"
ProblemDev9Value="Mod15Write"

ProblemDev10Name="ST380011ASL"
ProblemDev10Value="Mod15Write"

ProblemDev11Name="ST3120022ASL"
ProblemDev11Value="Mod15Write"

ProblemDev12Name="ST3160021ASL"
ProblemDev12Value="Mod15Write"

-------------------
mass testpack 7125 is ready
http://dev.driverpacks.thesneaky.com/dr … nightly.7z

I took radical measures.
The radical changes forced me to merge HWIDS into the latest drivers, because they drop support for some hardware when they update a driver.. (which was another reason why I assumed that newest drivers for latest BIOSes would not function on older BIOSes)

If this works, we have a slimmed down pack, with ONE 3112 base driver, and ONE 3112 raid driver.
I had NO time to run basic tests.
I am late on a date as is.
Food, champagne, Rock and Roll.. I am looking forward to it.

You guys rock. Thanks for helping us help you.

Jaak: You'll better go now, date, Rock'n Roll, drink but do not pass out.
We need your brains!   
(i have to wait for my party till the end of this day)

I'll do the test with your latest testpack.
MAYBE, i will try to edit one if it didn't work.
we shall see if i manage to make a custom one.

enjoy yourself.

hi
elimination works best by halves.

It's like this.
when you start and you have a hundred besides the one you know you need, try by deleting 50 of the 101
the testpack then has 51

If it works, reopen original, then delete 25 from the OTHER 50, and pack has 76
But, if it didn't, delete another 25, and run with 26.

Ruudboek once did this, and discovered we had a baddy in A\3 (it's no longer in the packs now)
I would have left S4 and S5 in at one point.
(you could, of course, also have tried by only removing S4, because that is the prime suspect..)

by the way, AD\9 was another suspect, and since you left that in, it no longer is.

Last edited by Jaak (2007-12-24 10:23:38)

good team work guys!!!

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!

The DriverPacks, the DP_Base program, and Support Forum are FREE!.

the SiLicon Raid capable drivers all have an R in the filename, and the INF files have information at the top.

Raid 5 drivers have R5 in the name. (example of an original is in SC.. In SC1 we renamed files yet SC1 still shows R5 in the filenames.)

The INI sections mention this too, and the overview of supported devices on the site is another list one can look at.

I'm sorry Jaak.
With your adjustments i still get the BSOD..

But when i remove the S4 entry and dir it works flawless!
In there is your problem device..

I go for some fishing now, done enough for this morning
So you have something on your hands now

you'va also been testing streaming of this

CHANGED for 7127

sILICON 3112
s4b AND s4c were removed. (an older in S4)
S5A and S5B and S5C were removed, (covered by latest in S5)

S4, removed three HWIDs in S4 INI.
S5, covers HWIDs from S5A and S5B and S5C (and the three removed in S4)

SiS
SiS 180/181/182/1182 "unified" driver v2110 is not good for all HWIDs.
re-introduced v1070 and disabled duplicated HWIDs in V2110

FIXES

INI fix
Disabled a few more drinvers in INI for windows 2000.
Windows 2000 memory limit for TXTmode requires we disable many, and we had again broken through limit.

INI fixes in [AD2], [AD6],[Ib4],[Ib5] (the new additions required this)

INI fix
[L] LsI SAS, tagname fix

INI fix
[P7] removed a duplicate HWID

Filename fixes;  renamed system file in
[S8A],[SA],[SA2],[SB2],[SB3],[SB4],[SB5],[SC2],[SC3] and [SC4]

NEW
[AD1]
Adaptec AAR-1420SA / AAR-1430SA SATA HostRAID Controller
07/03/2007,1.5.11975.0

NEW
[ADa]
"Adaptec AAR-1220SA/AAR-1225SA SATA HostRAID Controller"
07/08/2007,1.5.12073.0

NEW
[ADb]  "AACSAS Adaptec SAS/SATA-II RAID"
and  "AAC Adaptec RAID Windows 2000/XP/2003 Device Drivers"
09/15/2007, 5.2.0.15317
> supported devices
adptAvonPark.DeviceDesc = "IBM ServeRAID 8i Controller"
adptRombAurora.DeviceDesc = "IBM ServeRAID 8k/8k-l Controller"
adptIntruder4.DeviceDesc = "Adaptec SATA RAID AAR-2420SA Controller"
adptIntruder6.DeviceDesc = "Adaptec SATA RAID AAR-2620SA Controller"
adptIntruder8.DeviceDesc = "Adaptec SATA RAID AAR-2820SA Controller"
ICPIntruder4.DeviceDesc = "ICP SATA RAID ICP9047MA Controller"
ICPIntruder6.DeviceDesc = "ICP SATA RAID ICP9067MA Controller"
ICPIntruder8.DeviceDesc = "ICP SATA RAID ICP9087MA Controller"
adptBlackBird.DeviceDesc = "Adaptec RAID 4000"
adptMarauderX.DeviceDesc = "Adaptec SAS RAID 4800SAS Controller"
adptMarauderE.DeviceDesc = "Adaptec SAS RAID 4805SAS Controller"
icpMarauderX.DeviceDesc = "ICP SAS RAID ICP9085LI Controller"
icpMarauderE.DeviceDesc = "ICP SAS RAID ICP5085BR Controller"
IBM8s.DeviceDesc = "IBM ServeRAID 8s Controller"
adptVoodoo40.DeviceDesc = "Adaptec RAID 5405"
adptVoodoo44.DeviceDesc = "Adaptec RAID 5445"
adptVoodoo80.DeviceDesc = "Adaptec RAID 5805"
adptVoodoo08.DeviceDesc = "Adaptec RAID 5085"
adptVoodoo124.DeviceDesc = "Adaptec RAID 51245"
adptVoodoo164.DeviceDesc = "Adaptec RAID 51645"
adptVoodoo244.DeviceDesc = "Adaptec RAID 52445"
icpVoodoo44.DeviceDesc = "ICP5445SL"
icpVoodoo80.DeviceDesc = "ICP5085SL"
icpVoodoo08.DeviceDesc = "ICP5805SL"
adptMarauder40LP.DeviceDesc = "Adaptec RAID 3405"
adptMarauder80LP.DeviceDesc = "Adaptec RAID 3805"
adptMarauder120.DeviceDesc = "Adaptec RAID 31205"
adptMarauder160.DeviceDesc = "Adaptec RAID 31605"
icpMarauder40LP.DeviceDesc = "ICP5045BL"
icpMarauder80LP.DeviceDesc = "ICP5085BL"
icpMarauder120.DeviceDesc = "ICP5125BR"
icpMarauder160.DeviceDesc = "ICP5165BR"
adptVoodoo120.DeviceDesc = "Adaptec RAID 51205"
adptVoodoo160.DeviceDesc = "Adaptec RAID 51605"
icpVoodoo120.DeviceDesc = "ICP5125SL"
icpVoodoo160.DeviceDesc = "ICP5165SL"
adptMarauder08LP.DeviceDesc = "Adaptec RAID 3085"
icpMarauder08LP.DeviceDesc = "ICP5805BL"
adptAOC_USAS1_S4i.DeviceDesc = "AOC-USAS-S4i RAID Controller"
adptAOC_USAS1_S8i.DeviceDesc = "AOC-USAS-S8i RAID Controller"
adptAOC_USAS1_S4iR.DeviceDesc = "AOC-USAS-S4iR RAID Controller"
adptAOC_USAS1_S8iR.DeviceDesc = "AOC-USAS-S8iR RAID Controller"
adptAOC_USAS1_S8iLP.DeviceDesc = "AOC-USAS-S8i-LP RAID Controller"
adptAOC_USAS1_S8iRLP.DeviceDesc = "AOC-USAS-S8iR-LP RAID Controller"
adptSUN_4i4e.DeviceDesc = "Sun STK RAID REM"
adptSUN_Narvi.DeviceDesc = "Sun STK RAID EM"
adptSUN_Cougar.DeviceDesc = "Sun STK RAID INT"
adptSUN_Prometheus.DeviceDesc = "Sun STK RAID EXT"
aacsas_ServiceName = "Adaptec SAS/SATA-II RAID Miniport Driver"
> supported device list
adptVulcan.DeviceDesc = "Adaptec SCSI RAID 2200S Controller"
adptCrusader.DeviceDesc = "Adaptec SCSI RAID 2120S Controller"
adptSkyhawkscsi.DeviceDesc = "Adaptec SCSI RAID 2020ZCR Controller"
adptSkyhawksata.DeviceDesc = "Adaptec SATA RAID 2020SA Controller"
adptTerminatorscsi.DeviceDesc = "Adaptec SCSI RAID 2025ZCR Controller"
adptTerminatorsata.DeviceDesc = "Adaptec SATA RAID 2025SA Controller"
adptJaguar.DeviceDesc = "Adaptec SATA RAID 2410SA Controller"
adptCorsair8.DeviceDesc = "Adaptec SATA RAID 2810SA Controller"
adptCorsair16.DeviceDesc = "Adaptec SATA RAID 21610SA Controller"
adptBearcat.DeviceDesc = "Adaptec SATA RAID 2610SA Controller"
adptLancer2ch.DeviceDesc = "Adaptec SCSI RAID 2230S Controller"
adptLancer1ch.DeviceDesc = "Adaptec SCSI RAID 2130S Controller"
ICPLancer2ch.DeviceDesc = "ICP SCSI RAID ICP9024RO Controller"
ICPLancer1ch.DeviceDesc = "ICP SCSI RAID ICP9014RO Controller"
aac_ServiceName = "Adaptec RAID Miniport Driver"

UPDATE
intel iastor
from 07/12/2007,7.6.0.1011 to 09/29/2007,7.8.0.1012

Last edited by Jaak (2007-12-25 04:31:33)