• Registered: 2007-10-09
  • Posts: 1

Topic: nForce 5xx SATA RAID/Sil3132 Non-RAID SATA Drivers...Help Needed

(Note: Cross-posted on UBCD4Win forums)

I've used UBCD4Win for quite a while and I find it an invaluable tool, especially for backup/recovery with the Acronis True Image 10 BartPE plugin. However, since I upgraded my rig to a Athlon 64 X2 5000+ on a Biostar TF560 A2+ a couple of months ago, I haven't been able to get any of my UBCD4Win builds to work to my satisfaction. It seems that, no matter what I've tried, UBCD4Win v3.6 can't detect my nForce RAID0 array (2x74GB WD Raptors) or the non-RAID disks on that controller. I have my SATA DVD-RW drive on a Silicon Image Sil3132 PCIe controller (by itself) and while I don't think UBCD4Win is loading the drivers for that properly (it's not showing in Device Manager under UBCD4Win), UBCD4Win is seeing the DVD-RW drive and can access it fine.

I've tried all of these techniques to slipstream or add those drivers, all to no avail:
-leaving the DriverPacks Mass Storage Textmode Drivers plugin enabled (by itself)
-disabling the Mass Storage Textmode plugin and adding the latest WHQL drivers to drivers\SCSIAdapter
-slipstreaming the WHQL drivers into the Windows folder with *restricted project name, please email Ben for support* v1.4beta and disabling the DriverPacks Mass Storage Textmode plugin before building the UBCD4Win ISO
-slipstreaming the WHQL drivers into the Windows folder with DriverPacks BASE and disabling the DriverPacks Mass Storage Textmode plugin before building the UBCD4Win ISO

Hardware IDs (as shown in Vista Business Device Manager and SIW v1.70.634):
NVIDIA nForce RAID Controller: ACPI\NVRAID20; *NVRAID20
NVIDIA nForce Serial ATA Controller: PCI\VEN_10DEDEV_044CSUBSYS_54061565REV_A3; PCI\VEN_10DEDEV_044CSUBSYS_54061565; PCI\VEN_10DEDEV_044CCC_010485; PCI\VEN_10DEDEV_044CCC_0104
NVIDIA nForce RAID Device: SCSI\Array__NVIDIA____Raid_Disk_20____ ; SCSI\Array__NVIDIA____Raid_Disk_20; SCSI\Array__NVIDIA; SCSI\__NVIDIA____Raid_Disk_20
NVIDIA nForce RAID Device: SCSI\Array__NVIDIA____Raid_Disk_20____ ; SCSI\Array__NVIDIA____Raid_Disk_20; SCSI\Array__NVIDIA; SCSI\__NVIDIA____Raid_Disk_20
Silicon Image SiI 3132 SATALink Controller: PCI\VEN_1095DEV_3132SUBSYS_31321095REV_01; PCI\VEN_1095DEV_3132SUBSYS_31321095; PCI\VEN_1095DEV_3132CC_018000; PCI\VEN_1095DEV_3132CC_0180

DPs_BASE.ini:
[General]
; preferred language
prefLang    = "English"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons    = "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI        = "yes"

[Settings]
; disc/bartpe/multibootDisc
instPlatform    = "bartpe"
; trailing backslash is allowed, but not necessary
location    = "F:\UBCD4Win\PLUGIN"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks    = "select"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod    = "2"
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod    = "GUIRunOnce"

; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD        = "false"
; <path>, to specify a custom KTD cache location, if not specified: default (%SystemRoot%\DriverPacks)
KTDlocation    = ""
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC        = "no"

; you should only add this section if you've set [Settings]\DriverPacks to "select"
[SelectDriverPacks]
DP_Chipset    = "no"
DP_CPU        = "no"
DP_Graphics_A    = "no"
DP_Graphics_B    = "no"
DP_Graphics_C    = "no"
DP_LAN        = "no"
DP_MassStorage    = "no"
DP_Sound_A    = "no"
DP_Sound_B    = "no"
DP_WLAN        = "no"
DP_MassStorage_textmode = "yes"

DPs_BASE.log:
2007-10-08 20:14:32 : <INIT> DriverPacks BASE 7.05.2 initialized.
2007-10-08 20:14:32 : <INIT> Host environment: WIN_VISTA  on X86 CPU.
2007-10-08 20:14:32 : <INIT> Created temporary working directory.
2007-10-08 20:14:32 : <INIT> Imported proxy settings from Internet Explorer.
2007-10-08 20:14:32 : <INIT> Start scanning for DriverPacks for the wnt5_x86-32 platform.
2007-10-08 20:14:32 : <INIT>     Detected DriverPack Chipset 7.09!
2007-10-08 20:14:32 : <INIT>     Detected DriverPack CPU 7.04.1!
2007-10-08 20:14:32 : <INIT>     Detected DriverPack Graphics A 7.10!
2007-10-08 20:14:32 : <INIT>     Detected DriverPack Graphics B 7.10!
2007-10-08 20:14:32 : <INIT>     Detected DriverPack Graphics C 7.09.1!
2007-10-08 20:14:32 : <INIT>     Detected DriverPack LAN 7.09.1!
2007-10-08 20:14:32 : <INIT>     Detected DriverPack MassStorage 7.09.2!
2007-10-08 20:14:32 : <INIT>     Detected DriverPack Sound A 7.10!
2007-10-08 20:14:32 : <INIT>     Detected DriverPack Sound B 7.10!
2007-10-08 20:14:32 : <INIT>     Detected DriverPack WLAN 7.09.2!
2007-10-08 20:14:32 : <INIT>     Could not detect any 3rd party DriverPacks.
2007-10-08 20:14:32 : <INIT>     Finished scanning.
2007-10-08 20:14:32 : <INIT> Detected settings file "F:\UBCD4Win\plugin\DriverPacks.net\BASE\DPs_BASE.ini".
2007-10-08 20:14:32 : <INIT> The platform wnt5_x86-32_bartpe will be used (which is the 'bartpe' installation platform for the OS family 'wnt5_x86-32').
2007-10-08 20:14:32 : <INIT> Imported settings from settings file.
2007-10-08 20:14:32 : <INIT> [Settings]\DPsMethod not specified: default (2) was set.
2007-10-08 20:14:32 : <INIT> [Settings]\finisherMethod not specified: default (GUIRunOnce) was set.
2007-10-08 20:14:32 : <INIT> [OptionalSettings]\KTD default (false) was set.
2007-10-08 20:14:32 : <INIT> [OptionalSettings]\QSC default (no)    was set.
2007-10-08 20:14:32 : <GUI>  Initialized GUI.
2007-10-08 20:14:32 : <GUI>  Created a list of all available language files.
2007-10-08 20:14:32 : <GUI>  Set the last used language, English, as the GUI language.
2007-10-08 20:14:43 : <GUI>  Refreshed UpdateChecker with success.
2007-10-08 20:14:47 : <GUI>  Closed GUI.
2007-10-08 20:14:47 : <GUI>  Saved settings!
2007-10-08 20:14:47 : <CLNP> Temporary working directory successfully deleted.
2007-10-08 20:14:47 : Program terminated.

I've scoured these forums, the UBCD4Win forums, and other BartPE forums, along with Googling my brains out, but I've come up with nothing that has helped much. I can't imagine that I'm the only one who is having this problem, but from what I've seen, no one is posting them or a solution. If anyone knows a way to rectify these problems so I can see all my drives in UBCD4Win, I'd greatly appreciate it.

Last edited by talon_262 (2007-10-09 12:48:02)

  • OverFlow
  • DriverPacks Administrator & BASE Developer
  • Offline
  • From: Cincinnati
  • Registered: 2006-12-02
  • Posts: 6,730

Re: nForce 5xx SATA RAID/Sil3132 Non-RAID SATA Drivers...Help Needed

welcome to driverpacks and thanks for being here!

you did not mention what OS you were using as the source for your build XP or 2003?

it looks as though you closed the base program without htting the slipstream button.
that is what your log indicates anyway...

it should look like this 

2007-11-17 02:22:50 : <INIT> DriverPacks BASE 7.05.2 initialized in API mode by UBCD4WIN Configuration Utility.
2007-11-17 02:22:50 : <INIT> Host environment: WIN_XP Service Pack 2 on X86 CPU.
2007-11-17 02:22:50 : <INIT> Created temporary working directory.
2007-11-17 02:22:50 : <INIT> Imported proxy settings from Internet Explorer.
2007-11-17 02:22:58 : <INIT> Start scanning for DriverPacks for the wnt5_x86-32 platform.
2007-11-17 02:22:58 : <INIT> 	Detected DriverPack MassStorage 7.09.2!
2007-11-17 02:22:58 : <INIT> 	Could not detect any 3rd party DriverPacks.
2007-11-17 02:22:58 : <INIT> 	Finished scanning.
2007-11-17 02:22:58 : <INIT> Detected settings file "C:\UBCD4Win\plugin\DriverPacks.net\BASE\DPs_BASE.ini".
2007-11-17 02:22:58 : <INIT> The platform wnt5_x86-32_bartpe will be used (which is the 'bartpe' installation platform for the OS family 'wnt5_x86-32').
2007-11-17 02:22:58 : <INIT> Imported settings from settings file.
2007-11-17 02:22:58 : <INIT> [Settings]\DPsMethod not specified: default (2) was set.
2007-11-17 02:22:58 : <INIT> [Settings]\finisherMethod not specified: default (GUIRunOnce) was set.
2007-11-17 02:22:58 : <INIT> [OptionalSettings]\KTD default (false) was set.
2007-11-17 02:22:58 : <INIT> [OptionalSettings]\QSC default (no)    was set.
2007-11-17 02:22:58 : <SEL>  Selected module: mod_slip_wnt5_x86-32_bartpe.
2007-11-17 02:22:58 : <PREP> Existing BASE won't be changed.
2007-11-17 02:22:59 : <PREP> MassStorage.inf header info written.
2007-11-17 02:23:10 : <PREP> Extracted DriverPack MassStorage to a temporary working directory.
2007-11-17 02:23:11 : <SLIP> Processing the files now. This may take a minute.
2007-11-17 02:24:13 : <SLIP> Copied DriverPack MassStorage text mode driver files to BartPE Plugin folder.
2007-11-17 02:24:41 : <SLIP> Updated the MassStorage.ini [SetValue] sections to support DP MassStorage text mode drivers.
2007-11-17 02:24:41 : <SLIP> MassStorage.inf header info written.
2007-11-17 02:24:41 : <SLIP> Saved settings!
2007-11-17 02:24:46 : <SLIP> Slipstream finished in 1 minutes and 47 seconds.
2007-11-17 02:24:59 : <CLNP> Temporary working directory successfully deleted.
2007-11-17 02:24:59 : Program terminated.

see the bartpe tutorial in my sig below


ps since you do have the driverpacks in the correct folder (in plugins) you could use the plugins screen in pebuilder
hit config on # driverpacks.net - base -  hit config to enable
then hit refresh and you should then see ---> Yes # driverpacks.net - MassStorage 
in your plugins list.

I realize that you indicated you were a long time user of UBCD4win - but i am going by the log you posted.
I apologize in advance if i have not given you enough credit.

thanks for posting your INI and LOG and HWID's and a very good description
it is so nice to get such excellent detail from a new member!

Did you remove all the other mass storage drivers before useing the driverpacks
(removeing them from plugins and drivers folders?)

it may be to your advantage to get the latest build from UBCD4win
Creating a fresh source OS folder and fresh UBCD4win folder and starting "clean"

your version 3.06 has been replaced by 3.10

sorry this was so long in getting attn...

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

OverFlow's Website