Topic: Graphics ATI widescreen requests (post requests here)

If your notebook/laptop widescreen monitor resolution is not natively supported in the Graphics DriverPacks, and you don't feel comfortable making the modifications yourself using my tutorial here,  then please post your requests in this thread and I'll try to get them implemented in the next driverpack.  You will be requested to TEST the changes added to the new Driverpack.  If you are unwilling to test the new changes, your requested changes will NOT be added to the main Driverpack.

When making your requests, please provide the following information:
Manufacturer and model #:
Website of manufacturer support page: (so I can verify proper resolution support)
HWID of graphics chipset:
Screen resolution requested:


Example:
Manufacturer/model#: Gateway M505
Website: http://support.gateway.com/s/Mobile/Gat … 64nv.shtml
HWID: PCI\VEN_1002&DEV_4E50&SUBSYS_206117C0&REV_00\4&13B9B28C&0&0008: ATI MOBILITY RADEON 9600/9700 Series
Resolution: 1280x800  60Hz

Last edited by mr_smartepants (2007-06-15 18:58:26)

Read BEFORE you post.  HWID tool   DriverPacks Tutorial   DONATE!
http://driverpacks.net/userbar/admin-1.png
Not all heroes wear capes, some wear Kevlar!

Re: Graphics ATI widescreen requests (post requests here)

I just noticed that the link to HWID does not work any longer... hmm

As HWID is also a part of the BASE installation, that shouldn't be too much of the problem, however, I'm still wondering where the file moved to on our server...
Bâshrat the Sneaky, got any idea? wink

Re: Graphics ATI widescreen requests (post requests here)

[REQ]

I begin to follow the steps from [TUTORIAL] ATI Mobility widescreen support (changing resolutions), but my video card is not in the mobility ini file (as in step 6 of the tutorial).

I use some unknown laptop brand "Turbo-X" with Elitegroup Mainboard, Ati Mobility Radeon X1400 128Mb and 15.4" screen with native resolution 1280x800.
I added second display Asus VW223B with desire to use it as a "big working place" monitor. It has some usb driver with good quality, but it is not supported by some programs I use. That's why I have to use VGA interface, but there is the problem. I can't set 1680x1050 resolution for Asus monitor.


Manufacturer/model#: Asus VW223B
Website: http://www.asus.com/product.aspx?P_ID=PZ9P4gG65URMJmYs
HWID: PCI\VEN_1002&DEV_7145&SUBSYS_0F691019&REV_00\4&2D404BB6&0&0008: ATI Mobility Radeon X1400
Resolution: 1680x1050  60Hz

Re: Graphics ATI widescreen requests (post requests here)

I'll look into it.
I've made that modification to a testing .inf.  Can you download the compressed .inf and add the decompressed file to 9.10rc1 DriverPack Graphics A\D\G\A\ and then test it for us?
http://driverpacks.sytes.net/driverpack … 31_test.7z

Read BEFORE you post.  HWID tool   DriverPacks Tutorial   DONATE!
http://driverpacks.net/userbar/admin-1.png
Not all heroes wear capes, some wear Kevlar!

Re: Graphics ATI widescreen requests (post requests here)

I am downloading it and will report soon.

---------------------------------------------
After test
---------------------------------------------
Can change resolution but not OK


Tested in "DP_Graphics_A_wnt5_x86-32_910rc1"
with edited CX_76831.inf

This is what I done:


Download compressed CX_76831.inf, decompress it and put it to DP_Graphics_A_wnt5_x86-32_910rc1 in folder \D\G\A

Uninstall all video drivers

Restart

Windows find video hardware (X1400) and install it with the tested inf

Windows find another hardware (monitor) and install it as Plug and play monitor (not recognized as Asus VW223B)

Restart

Change laptop lcd resolution to 1280x800@60Hz@32Bit color, Apply, Result:OK

Change second monitor Asus VW223B resolution to 1680x1050@60Hz@32, Apply, Result:Not OK

After hitting Apply the resolution get back to 640x480@60@8

On Advanced\Monitor try to check "Hide modes that this monitor cannot display", but it is not active

On Advanced\Adapter\List all modes set 1680x1050@60@32, but after Apply and Ok the resolution remain 640x480

There is no Catalyst Control panel and the two monitors are in clone mode (same on both)

----------

Change mode to "Expand my Windows desktop onto this monitor"

The resolution and color depth can be changed to 1680x1050@60@32 but the screen doesn't fit in the monitor, when I get close to the border of the monitor it slide.

Restart, but no effect.
Can be done without slide?
Any needed log or something?

Last edited by kode (2009-10-19 22:44:43)

Re: Graphics ATI widescreen requests (post requests here)

To install CCC, just go to DriverPack Graphics A\D\G\A1\CC\setup.exe  but it won't install unless the drivers have been installed, then after you'll need a restart.
You can't do monitor clone at 1680x1050@60Hz@32 because your laptop screen won't support it.  You'll have to install CCC and the Asus monitor driver for all of this to work properly.

Read BEFORE you post.  HWID tool   DriverPacks Tutorial   DONATE!
http://driverpacks.net/userbar/admin-1.png
Not all heroes wear capes, some wear Kevlar!

Re: Graphics ATI widescreen requests (post requests here)

I installed CCC, but it gives some memory error (The instruction at 0x7814507a referenced memory at 0x0023e000. The memory could not be read)
?nyway, I try it before with no success.

The only driver that I have for Asus monitor is EzLink (usb video driver). It transfer video signal trough usb, and load CPU (when I start video in full screen CPU usage is 35-40%). You can see it on

http://support.asus.com/download/download.aspx

(Asus VW223B, WinXP)

I will send email to asus support, just to see what they will tell me. Maybe the video signal from the VC is with the resolution from the laptop lcd and the card can't output two different resolution or something.

Thank you very much for the help and driver modification.

Last edited by kode (2009-10-20 22:05:17)

Re: Graphics ATI widescreen requests (post requests here)

i have same asus vw223b (gts 250)in windows 7 64or32bit cant set 1680x1050 always is 1600x1200,..in windows XP sp3 32bit i set 1680x1050 but in games that do not have the settings for aspect monitor 16:10,16:9, 4:3 ..always is 4:3  and the image is stretched in games, and the monitor is turned off for a second, like  when changing resolution.also in games and on the desktop and when I do not do anything.PLEASE HELP.

Re: Graphics ATI widescreen requests (post requests here)

No need to double post.  I deleted your duplicate post for you.
Please read the first post for instructions.

Read BEFORE you post.  HWID tool   DriverPacks Tutorial   DONATE!
http://driverpacks.net/userbar/admin-1.png
Not all heroes wear capes, some wear Kevlar!

Re: Graphics ATI widescreen requests (post requests here)

I just (Feb 2008) updated some packages on this system, after which the widescreen stopped working :-(.
Just now (March 2008) got it working again db2 700 certification dumps: change the DefaultDepth and Depth values in the Screen section of your xorg.conf from 24 to 16... (the driver is suddenly picky about the maximum clock speed of the graphics card (/var/log/Xorg.0.log says

Re: Graphics ATI widescreen requests (post requests here)

matt1 wrote:

I just (Feb 2008) updated some packages on this system, after which the widescreen stopped working :-(.
Just now (March 2008) got it working again db2 700 certification dumps: change the DefaultDepth and Depth values in the Screen section of your xorg.conf from 24 to 16... (the driver is suddenly picky about the maximum clock speed of the graphics card (/var/log/Xorg.0.log says

Looks like another spam-bot.  Ad link removed
Your post deals with linux.  This THREAD deals with Windows.

Read BEFORE you post.  HWID tool   DriverPacks Tutorial   DONATE!
http://driverpacks.net/userbar/admin-1.png
Not all heroes wear capes, some wear Kevlar!

Re: Graphics ATI widescreen requests (post requests here)

emachines e440
http://www.emachines.com/support/drivers.html
PCI\VEN_1002&DEV_9712&SUBSYS_036E1025&REV_00
PCI\VEN_1002&DEV_9712&SUBSYS_036E1025
PCI\VEN_1002&DEV_9712&CC_030000
PCI\VEN_1002&DEV_9712&CC_0300
Ati Mobility Radeon HD 4250
1366*768

On site available only for Windows 7 but I ask install and use with XP. Sorry for my bad english. Thanks

Re: Graphics ATI widescreen requests (post requests here)

Done in latest testing build.
Very, VERY poor choice in username BTW.

Read BEFORE you post.  HWID tool   DriverPacks Tutorial   DONATE!
http://driverpacks.net/userbar/admin-1.png
Not all heroes wear capes, some wear Kevlar!