Topic: Atheros AR5007EG Windows Driver Needed For Monitor Mode
I have
Acer aspire one
win xp service pack 2
atheros AR5007EG Wifi Card
Any help would be awesome.
You are not logged in. Please login or register.
I have
Acer aspire one
win xp service pack 2
atheros AR5007EG Wifi Card
Any help would be awesome.
If you could post your hwids that would be great!
===========
PCI Devices
===========
PCI\VEN_10EC&DEV_8136&SUBSYS_015B1025&REV_02\4&20975680&0&00E1: Realtek RTL8102E/RTL8103E Family PCI-E Fast Ethernet NIC
PCI\VEN_168C&DEV_001C&SUBSYS_E008105B&REV_01\4&2803E7C1&0&00E2: Atheros AR5007EG Wireless Network Adapter
PCI\VEN_8086&DEV_2448&SUBSYS_00000000&REV_E2\3&B1BFB68&0&F0 : Intel(R) 82801 PCI Bridge - 2448
PCI\VEN_8086&DEV_27A6&SUBSYS_015B1025&REV_03\3&B1BFB68&0&11 : Mobile Intel(R) 945 Express Chipset Family
PCI\VEN_8086&DEV_27AC&SUBSYS_00000000&REV_03\3&B1BFB68&0&00 : Mobile Intel(R) 945GME Express Processor to DRAM Controller - 27AC
PCI\VEN_8086&DEV_27AE&SUBSYS_015B1025&REV_03\3&B1BFB68&0&10 : Mobile Intel(R) 945 Express Chipset Family
PCI\VEN_8086&DEV_27B9&SUBSYS_00000000&REV_02\3&B1BFB68&0&F8 : Intel(R) 82801GBM (ICH7-M/U) LPC Interface Controller - 27B9
PCI\VEN_8086&DEV_27C4&SUBSYS_015B1025&REV_02\3&B1BFB68&0&FA : Intel(R) 82801GBM/GHM (ICH7-M Family) Serial ATA Storage Controller - 27C4
PCI\VEN_8086&DEV_27C8&SUBSYS_015B1025&REV_02\3&B1BFB68&0&E8 : Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8
PCI\VEN_8086&DEV_27C9&SUBSYS_015B1025&REV_02\3&B1BFB68&0&E9 : Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9
PCI\VEN_8086&DEV_27CA&SUBSYS_015B1025&REV_02\3&B1BFB68&0&EA : Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA
PCI\VEN_8086&DEV_27CB&SUBSYS_015B1025&REV_02\3&B1BFB68&0&EB : Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB
PCI\VEN_8086&DEV_27CC&SUBSYS_015B1025&REV_02\3&B1BFB68&0&EF : Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC
PCI\VEN_8086&DEV_27D0&SUBSYS_00000000&REV_02\3&B1BFB68&0&E0 : Intel(R) 82801G (ICH7 Family) PCI Express Root Port - 27D0
PCI\VEN_8086&DEV_27D2&SUBSYS_00000000&REV_02\3&B1BFB68&0&E1 : Intel(R) 82801G (ICH7 Family) PCI Express Root Port - 27D2
PCI\VEN_8086&DEV_27D4&SUBSYS_00000000&REV_02\3&B1BFB68&0&E2 : Intel(R) 82801G (ICH7 Family) PCI Express Root Port - 27D4
PCI\VEN_8086&DEV_27D6&SUBSYS_00000000&REV_02\3&B1BFB68&0&E3 : Intel(R) 82801G (ICH7 Family) PCI Express Root Port - 27D6
PCI\VEN_8086&DEV_27D8&SUBSYS_015B1025&REV_02\3&B1BFB68&0&D8 : Microsoft UAA Bus Driver for High Definition Audio
PCI\VEN_8086&DEV_27DA&SUBSYS_015B1025&REV_02\3&B1BFB68&0&FB : Intel(R) 82801G (ICH7 Family) SMBus Controller - 27DA
19 matching device(s) found.
===========
USB Devices
===========
USB\ROOT_HUB\4&1BAA685&0 : USB Root Hub
USB\ROOT_HUB\4&2EEF2415&0 : USB Root Hub
USB\ROOT_HUB\4&4DE82C5&0 : USB Root Hub
USB\ROOT_HUB\4&FCF8232&0 : USB Root Hub
USB\ROOT_HUB20\4&624C0C7&0 : USB Root Hub
USB\VID_046D&PID_C018\5&1536627B&0&1 : USB Human Interface Device
USB\VID_090C&PID_1000\HN269OIA18NYG7KL : USB Mass Storage Device
USBSTOR\DISK&VEN_USB&PROD_DISK_2.0&REV_0403\HN269OIA18NYG7KL&0: USB DISK 2.0 USB Device
9 matching device(s) found.
=============
Input Devices
=============
HID\VID_046D&PID_C018\6&15BB9715&0&0000 : HID-compliant mouse
1 matching device(s) found.
============
ACPI Devices
============
ACPI\ACPI0003\2&DABA3FF&0 : Microsoft AC Adapter
ACPI\FIXEDBUTTON\2&DABA3FF&0 : ACPI Fixed Feature Button
ACPI\GENUINEINTEL_-_X86_FAMILY_6_MODEL_28\_0 : Intel(R) Atom(TM) CPU N270 @ 1.60GHz
ACPI\GENUINEINTEL_-_X86_FAMILY_6_MODEL_28\_1 : Intel(R) Atom(TM) CPU N270 @ 1.60GHz
ACPI\INT0800\4&38462492&0 : Intel(R) 82802 Firmware Hub Device
ACPI\PNP0000\4&38462492&0 : Programmable interrupt controller
ACPI\PNP0100\4&38462492&0 : System timer
ACPI\PNP0103\4&38462492&0 : High precision event timer
ACPI\PNP0200\4&38462492&0 : Direct memory access controller
ACPI\PNP0303\4&38462492&0 : Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
ACPI\PNP0A08\2&DABA3FF&0 : PCI bus
ACPI\PNP0B00\4&38462492&0 : System CMOS/real time clock
ACPI\PNP0C02\4&38462492&0 : Motherboard resources
ACPI\PNP0C04\4&38462492&0 : Numeric data processor
ACPI\PNP0C09\4&38462492&0 : Microsoft ACPI-Compliant Embedded Controller
ACPI\PNP0C0A\0 : Microsoft ACPI-Compliant Control Method Battery
ACPI\PNP0C0C\2&DABA3FF&0 : ACPI Power Button
ACPI\PNP0C0D\2&DABA3FF&0 : ACPI Lid
ACPI\PNP0C0E\2&DABA3FF&0 : ACPI Sleep Button
ACPI\PNP0C14\0 : Microsoft Windows Management Interface for ACPI
ACPI\PNP0F13\4&38462492&0 : Synaptics PS/2 Port Pointing Device
ACPI_HAL\PNP0C08\0 : Microsoft ACPI-Compliant System
ROOT\ACPI_HAL\0000 : ACPI Multiprocessor PC
23 matching device(s) found.
============
HDA Audio
============
HDAUDIO\FUNC_01&VEN_10EC&DEV_0268&SUBSYS_1025015B&REV_1001\4&32D00141&0&0001: Realtek High Definition Audio
1 matching device(s) found.
============
RAID Devices
============
PCI\VEN_8086&DEV_27C4&SUBSYS_015B1025&REV_02\3&B1BFB68&0&FA
Name: Intel(R) 82801GBM/GHM (ICH7-M Family) Serial ATA Storage Controller - 27C4
Hardware ID's:
PCI\VEN_8086&DEV_27C4&SUBSYS_015B1025&REV_02
PCI\VEN_8086&DEV_27C4&SUBSYS_015B1025
PCI\VEN_8086&DEV_27C4&CC_010180
PCI\VEN_8086&DEV_27C4&CC_0101
Compatible ID's:
PCI\VEN_8086&DEV_27C4&REV_02
PCI\VEN_8086&DEV_27C4
PCI\VEN_8086&CC_010180
PCI\VEN_8086&CC_0101
PCI\VEN_8086
PCI\CC_010180
PCI\CC_0101
1 matching device(s) found.
Last edited by z0ne_tripper (2009-05-03 12:29:28)
===========
PCI Devices
===========
...
PCI\VEN_168C&DEV_001C&SUBSYS_E008105B&REV_01\4&2803E7C1&0&00E2: Atheros AR5007EG Wireless Network Adapter
...
z0ne_tripper, the device with this ID is supported by the new beta Driverpack WLAN, I'll send you an email with the downloadlink. Please test and report back here.
But there is only the "normal" driver, do you really mean driver "For Monitor Mode" as your topic suggests? If yes, I'm afraid it won't work for you and I do not have an idea where to get a Atheros driver that supports monitor mode.
thank you for the link, and yes i mean monitor mode, I already have the original driver for this card, will the one in the link you sent me be a better option?
I think this is one of those scenarios i mentioned to you Jse
where the Setup.exe must be run to install a custom control panel.
this is acomplished with the packs INI file...
calling setup.exe by useing a trigger
like a HWID, or a particular file that is installed if the hardware exists
look at the Graphics Packs for examples
you can ask me questions in the team forum if you have any
I already have the original driver for this card, will the one in the link you sent me be a better option?
That's a good question since you didn't tell which version you use. I have included version 7.6.1.160 date 10/07/2008 MM/DD/JJJJ in directory D\W\AtT.
From the viewpoint of the installation one driver is better than another one if
- it has valid signature (and the other has not),
- if the hardware ID matches completely (PCI\VEN_168C&DEV_001C&SUBSYS_E008105B is better than PCI\VEN_168C&DEV_001C),
- if the version number is newer (see line "DriverVer = 10/07/2008,7.6.1.160" in the *.inf file of the driver or the "driver" tab in device manager if the driver is installed).
From the viewpoint of driverpack maintainer the better driver
- supports more (best: all) hardware ids of one chipset,
- is administered by the chipset vendor,
- it will be updated if needed,
- has a revision history / changelog.
From the viewpoint of usage one driver is better that has
- more functionality,
- less errors,
- better performance,
- runs more stable.
In most cases newer driver versions are better than older.
... and yes i mean monitor mode ...
z0ne_tripper, I think I found what you are looking for. Please see here and follow the link "Support & Downloads" and find "Version 7.6.1.86 Version with Client Utility and WlanMon". This archive contains among drivers (version 7.6.1.86) which are not signed a subdirectory WlanMon.
As you can see there are no special drivers for monitor mode but rather an application that activates this mode. See the enclosed *.doc file for more information. Of course the dirvers installed must support that funktionality, but I think all Atheros drivers newer than this version should do so.
I do not have access to a notebook with the Atheros chipset, so I can not test it at the moment.
Please test and report back if it did work for you.
I think this is one of those scenarios i mentioned to you Jse
where the Setup.exe must be run to install a custom control panel.
this is acomplished with the packs INI file...
calling setup.exe by useing a trigger
...
OverFlow, in this case the WlanMon is an applications with it's own setup procedure that is more or less independent from the driver itself. Only a very little percentage of users will need this application so I would argue for not to install this application with DP procedures. Instead the few users who need this application should install it on theire own.
@Jse
Good answer... and the one I might have given myself.
- we don't want to add size to the DriverPacks without good reason.
The WlanMon can / would make an excellent 3rd party DriverPack though...
WlanMon is an applications with it's own setup procedure that is more or less independent from the driver itself.
The point I fell short of making was: (LOL)
This is a perfect example of what the finisher and pack.ini combo is designed for
@z0ne_tripper
You may create your own 3rd party DriverPack if you like.
There is help in the 'docs' folder of your DriverPacks folder,
and more help stickied in the 3rd party DriverPack Forum here,
If you need help with your WLAN_Addon_Software_Pack, Please just ask!
Welcome to DriverPacks
and to quote our good friend Jaak
"Help us to help you!"
Please report back.
Always include good details
(Like BASE and DriverPacks versions used)
Have a great day
Powered by PunBB, supported by Informer Technologies, Inc.
Currently installed 3 official extensions. Copyright © 2003–2009 PunBB.
[ Generated in 0.017 seconds, 9 queries executed ]