Topic: UBCD4Win Mass storage Iastor.sys

I have AW9D MB with ICH7R/DH raid ( default driver iastor78.sys). When I boot in with UBCD4WIN with mass storage DP 9.01, the system pickup the driver megasr.sys as I see in registry HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\Scsi\Scsi Port 4 : Driver : megasr and take a dummy volume device from megasr.inf instead of my Raid Volume. Could you Help Please?

Re: UBCD4Win Mass storage Iastor.sys

is the volume accessable at all?

What is the HWID of the device? (tool in my signature)

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

Re: UBCD4Win Mass storage Iastor.sys

Hwid :
PCI\VEN_8086&DEV_27C3&SUBSYS_107A147B&REV_01
PCI\VEN_8086&DEV_27C3&SUBSYS_107A147B
PCI\VEN_8086&DEV_27C3&CC_010400
PCI\VEN_8086&DEV_27C3&CC_0104

Compatible Ids:
PCI\VEN_8086&DEV_27C3&REV_01
PCI\VEN_8086&DEV_27C3
PCI\VEN_8086&CC_010400
PCI\VEN_8086&CC_0104
PCI\VEN_8086
PCI\CC_010400
PCI\CC_0104


- it is from the installed windows xp sp3 on this comp.

The Volume is not visual at all.

Thanks in advance

Last edited by victorka (2009-02-25 15:54:26)

Re: UBCD4Win Mass storage Iastor.sys

Additional info:

If I get rid of megasr completely in txtsetup.sif - all working fine, but if I have at least one hwid refer to megasr in txtsetup.sif  it is the same above mentioned situation.

Last edited by victorka (2009-02-26 15:14:06)

Re: UBCD4Win Mass storage Iastor.sys

Thank you... it seems you have found a bug with a replacement driver...

it may not be marked correctly in mass INI as a replacement what
servicepack was the xp you used when you built your bartpe?

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

Re: UBCD4Win Mass storage Iastor.sys

I use SP3.

Re: UBCD4Win Mass storage Iastor.sys

Look like this one is for me.

Re: UBCD4Win Mass storage Iastor.sys

Thanks so much JakeLD... your time spent on the packs can not be measured nor fully appreciated by anyone who has not done it. If only there were medals for civilians... if there were i would recommend you for a chest full.

Please accept my deepest thanks, eternal gratitude, and undying respect as substitutes for gold which i do not have to give you!

your friend Jeff!

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

Re: UBCD4Win Mass storage Iastor.sys

Guys, sorry for asking, but what is  about any progress over here?
I could perform some test in BartPE environment if it is necessary.

As far as I understand this is not the pure problem in Bartpe...

Respectfully, Viktor.

Re: UBCD4Win Mass storage Iastor.sys

Were plodding away at it... don't loose hope! big_smile

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.