101 Reply by cdob

  • cdob
  • DriverPacks Guru
  • Offline
  • Registered: 2006-08-13
  • Posts: 270

Re: [BSOD] 0x0000007B Error with MassStorage 7.12 (Si3112r, ATI SB450)

Jaak wrote:

There are a few drivers which do use those tags in PnP driver.

I've seen PCI\VEN_*&DEV_*&CC_01* at driver inf files.

Which driver file use PCI\VEN_*&DEV_*&SUBSYS_*&CC_01* ?

102 Reply by Jaak

  • Jaak
  • Old Timer Rookie
  • Offline
  • From: Eeklo, in the East Flanders
  • Registered: 2006-07-23
  • Posts: 3,594

Re: [BSOD] 0x0000007B Error with MassStorage 7.12 (Si3112r, ATI SB450)

25 INF have &CC_010

The answer was 42?
Kind regards, Jaak.

103 Reply by cdob

  • cdob
  • DriverPacks Guru
  • Offline
  • Registered: 2006-08-13
  • Posts: 270

Re: [BSOD] 0x0000007B Error with MassStorage 7.12 (Si3112r, ATI SB450)

Jaak wrote:

25 INF have &CC_010

Yes, that's true.

However I count zero SUBSYS_*&CC_01*.

I don't own a Si3112r, I used VMware instead for testing purposes.
devcon list 

PCI\VEN_8086&DEV_7111&SUBSYS_197615AD&REV_01\3&61AAA01&0&39
    Name: IDE Controller
    Hardware ID's:
        PCI\VEN_8086&DEV_7111&SUBSYS_197615AD&REV_01
        PCI\VEN_8086&DEV_7111&SUBSYS_197615AD
        PCI\VEN_8086&DEV_7111&CC_01018A
        PCI\VEN_8086&DEV_7111&CC_0101
    Compatible ID's:
        PCI\VEN_8086&DEV_7111&REV_01
        PCI\VEN_8086&DEV_7111
        PCI\VEN_8086&CC_01018A
        PCI\VEN_8086&CC_0101
        PCI\VEN_8086
        PCI\CC_01018A
        PCI\CC_0101
1 matching device(s) found.

There is DEV_*&CC_0101.
Contrary there is no SUBSYS_*&CC_01*.


Next I set intelide at
Control\CriticalDeviceDatabase\PCI#VEN_8086&DEV_7111&SUBSYS_197615AD&CC_0101
and removed intelide from
Control\Class\{4D36E96A-E325-11CE-BFC1-08002BE10318}

Reboot: BSOD 0x7b


Next I set intelide
Control\CriticalDeviceDatabase\PCI#VEN_8086&DEV_7111&SUBSYS_197615AD

Reboot: Windows does boot.


I'm convinced: SUBSYS_*&CC_01* is not a valid HardwareID.

104 Reply by Jaak

  • Jaak
  • Old Timer Rookie
  • Offline
  • From: Eeklo, in the East Flanders
  • Registered: 2006-07-23
  • Posts: 3,594

Re: [BSOD] 0x0000007B Error with MassStorage 7.12 (Si3112r, ATI SB450)

Hi
THANKS for that method of testing the theory.
I have just pulled the &CC_010*  from SUBSYS_*&CC_010* where we did that.

I wonder if you read it, but I once wrote I thought that SUBSYS_* would deal with the "mode", but yes, a few sections got  "mode-tagged" after a SUBSYS_* despite my doubts on that.
You just proved to me that this is invalid.
THANKS.

The answer was 42?
Kind regards, Jaak.

105 Reply by Jaak

  • Jaak
  • Old Timer Rookie
  • Offline
  • From: Eeklo, in the East Flanders
  • Registered: 2006-07-23
  • Posts: 3,594

Re: [BSOD] 0x0000007B Error with MassStorage 7.12 (Si3112r, ATI SB450)

so... now we will have to rush towards a release.. Because a fluke like this cannot stay in.

I will upload the latest build so you guys can TEST it.

The answer was 42?
Kind regards, Jaak.
  • sam1am
  • DriverPacks newbie
  • Offline
  • Registered: 2008-02-12
  • Posts: 5

Re: [BSOD] 0x0000007B Error with MassStorage 7.12 (Si3112r, ATI SB450)

Hi guys, new to driverpacks here, so please forgive the noobness...

First of all, great work on what you've done.  I found it impossible to install Windows on a machine that I have a SATA RAID array in and in which I CANNOT install a floppy drive to include the drivers.  I downloaded an XP iso that had the massstorage driverpack, and it went through the text install just fine! 

(note:  I am not pirating windows - I have a full legit version and just found it easier to download an iso with massstorage rather than trying to make one).

Anyway, the version I have is a few months old and I have received the STOP 0x0000007B BSOD upon booting after the text based install. 

So I understand I just need the newest massstorage pack, right?

Can someone point me to a guide on how to use these packs and create my own .iso - or even better just PM me a location where I can download everything put together with the latest version (again, I have a fully legit copy of windows already - I'm not asking to pirate)?

Thanks.

  • OverFlow
  • DriverPacks Administrator & BASE Developer
  • Offline
  • From: Cincinnati
  • Registered: 2006-12-02
  • Posts: 6,730

Re: [BSOD] 0x0000007B Error with MassStorage 7.12 (Si3112r, ATI SB450)

@ sam I am check our signatures at the bottom of our posts and visit the home page.

my hwids

 =========== 
PCI Devices 
=========== 
PCI\VEN_1095&DEV_3112&SUBSYS_61121095&REV_02\4&1F7DBC9F&0&58F0: Silicon Image SiI 3112 SATARaid Controller
PCI\VEN_10DE&DEV_00F1&SUBSYS_31501458&REV_A2\4&299CCBFA&0&0008: NVIDIA GeForce 6600 GT
PCI\VEN_1283&DEV_8212&SUBSYS_00011283&REV_10\4&1F7DBC9F&0&60F0: ITE IT8211 ATA/ATAPI Controller
PCI\VEN_8086&DEV_1019&SUBSYS_10198086&REV_00\4&16EBCD95&0&0818: Intel(R) PRO/1000 CT Desktop Connection
PCI\VEN_8086&DEV_244E&SUBSYS_00000000&REV_C2\3&13C0B0C5&0&F0: Intel(R) 82801 PCI Bridge - 244E
PCI\VEN_8086&DEV_24D0&SUBSYS_00000000&REV_02\3&13C0B0C5&0&F8: Intel(R) 82801EB LPC Interface Controller - 24D0
PCI\VEN_8086&DEV_24D1&SUBSYS_24D11458&REV_02\3&13C0B0C5&0&FA: Intel(R) 82801EB Ultra ATA Storage Controllers
PCI\VEN_8086&DEV_24D2&SUBSYS_24D21458&REV_02\3&13C0B0C5&0&E8: Intel(R) 82801EB USB Universal Host Controller - 24D2
PCI\VEN_8086&DEV_24D3&SUBSYS_24D21458&REV_02\3&13C0B0C5&0&FB: Intel(R) 82801EB SMBus Controller - 24D3
PCI\VEN_8086&DEV_24D4&SUBSYS_24D21458&REV_02\3&13C0B0C5&0&E9: Intel(R) 82801EB USB Universal Host Controller - 24D4
PCI\VEN_8086&DEV_24D5&SUBSYS_A0021458&REV_02\3&13C0B0C5&0&FD: Realtek AC'97 Audio
PCI\VEN_8086&DEV_24D7&SUBSYS_24D21458&REV_02\3&13C0B0C5&0&EA: Intel(R) 82801EB USB Universal Host Controller - 24D7
PCI\VEN_8086&DEV_24DB&SUBSYS_24D21458&REV_02\3&13C0B0C5&0&F9: Intel(R) 82801EB Ultra ATA Storage Controllers
PCI\VEN_8086&DEV_24DD&SUBSYS_50061458&REV_02\3&13C0B0C5&0&EF: Intel(R) 82801EB USB2 Enhanced Host Controller - 24DD
PCI\VEN_8086&DEV_24DE&SUBSYS_24D21458&REV_02\3&13C0B0C5&0&EB: Intel(R) 82801EB USB Universal Host Controller - 24DE
PCI\VEN_8086&DEV_2570&SUBSYS_00000000&REV_02\3&13C0B0C5&0&00: Intel(R) 82865G/PE/P/GV/82848P Processor to I/O Controller - 2570
PCI\VEN_8086&DEV_2571&SUBSYS_00000000&REV_02\3&13C0B0C5&0&08: Intel(R) 82865G/PE/P/GV/82848P Processor to AGP Controller - 2571
PCI\VEN_8086&DEV_2573&SUBSYS_00000000&REV_02\3&13C0B0C5&0&18: Intel(R) 82865G/PE/P/GV/82848P Processor to PCI to CSA bridge - 2573
18 matching device(s) found.

M:\save_hwids>devcon hwids =scsiadapter
ACPI\PNPA000\4&5D18F2DF&0
    Name: SCSI/RAID Host Controller
    Hardware ID's:
        ACPI\PNPA000
        *PNPA000
    Compatible ID's:
        GEN_SCSIADAPTER
PCI\VEN_1095&DEV_3112&SUBSYS_61121095&REV_02\4&1F7DBC9F&0&58F0
    Name: Silicon Image SiI 3112 SATARaid Controller
    Hardware ID's:
        PCI\VEN_1095&DEV_3112&SUBSYS_61121095&REV_02
        PCI\VEN_1095&DEV_3112&SUBSYS_61121095
        PCI\VEN_1095&DEV_3112&CC_010400
        PCI\VEN_1095&DEV_3112&CC_0104
    Compatible ID's:
        PCI\VEN_1095&DEV_3112&REV_02
        PCI\VEN_1095&DEV_3112
        PCI\VEN_1095&CC_010400
        PCI\VEN_1095&CC_0104
        PCI\VEN_1095
        PCI\CC_010400
        PCI\CC_0104
PCI\VEN_1283&DEV_8212&SUBSYS_00011283&REV_10\4&1F7DBC9F&0&60F0
    Name: ITE IT8211 ATA/ATAPI Controller
    Hardware ID's:
        PCI\VEN_1283&DEV_8212&SUBSYS_00011283&REV_10
        PCI\VEN_1283&DEV_8212&SUBSYS_00011283
        PCI\VEN_1283&DEV_8212&CC_010400
        PCI\VEN_1283&DEV_8212&CC_0104
    Compatible ID's:
        PCI\VEN_1283&DEV_8212&REV_10
        PCI\VEN_1283&DEV_8212
        PCI\VEN_1283&CC_010400
        PCI\VEN_1283&CC_0104
        PCI\VEN_1283
        PCI\CC_010400
        PCI\CC_0104
3 matching device(s) found.
DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

OverFlow's Website

  • sam1am
  • DriverPacks newbie
  • Offline
  • Registered: 2008-02-12
  • Posts: 5

Re: [BSOD] 0x0000007B Error with MassStorage 7.12 (Si3112r, ATI SB450)

OverFlow - thanks - I had looked at a few tutorials, but the one in your sig was what I was looking for.  Problem is, a noob like me didn't know what "DP" or "HWID" meant - so finding the right instructions was confusing at first.

Anyway - I got everything figured out now.  I made my own install CD and just tried it out.  Now, during the install I get an error that says "The file aec6260.sys is corrupted" at which point the text install quits.

I have no spent the better part of a week trying to install Windows XP on this computer, and am about ready to call it quits.  You guys are seriously amazing and have done great work, but the very fact that such work is needed just to make Windows XP *INSTALL* on an average computer is the most absolutely #@$#@Ring ridiculous thing I think I have ever experienced.  Microsoft will NEVER get another penny from me and I will continue to encourage my friends to switch to linux or Mac.

Please forgive the anger (it's not directed at anyone here), but my business has screeched to a halt and I have not done a single minute of real work as I've been dealing with this single machine.  I need to do reports and run our accounting software (beginning of the month, and tax season to boot!).  It has turned into a huge fscking joke.

Unless anyone else has any ideas, my next move is to "install" several clip-fulls from my XD .40 subcompact into this machine.

Last edited by sam1am (2008-02-12 14:56:38)

  • From: Bakersfield California
  • Registered: 2006-05-27
  • Posts: 635

Re: [BSOD] 0x0000007B Error with MassStorage 7.12 (Si3112r, ATI SB450)

I had a similar problem a week ago (corrupted file), cleaned the DVD Reader and everything was fine. Also try putting the PC on it's side and pull the cables from the DVD and put a spare drive laid on the top and try that.

You may also have a bad piece of memory, try Memtest86+

http://www.memtest.org/#downiso
Download - Pre-Compiled Bootable ISO (.zip)

Create a CD and boot from it.

Just a few ideas that may help.

Good luck.

  • sam1am
  • DriverPacks newbie
  • Offline
  • Registered: 2008-02-12
  • Posts: 5

Re: [BSOD] 0x0000007B Error with MassStorage 7.12 (Si3112r, ATI SB450)

Thanks BigBrit for the ideas.

I have made 5 or 6 more install CDs from 3 different XP source CDs - each failing at a different part of the install.  Some would fail or complain of missing files in the text install, and some would complain of missing or corrupt files in the graphic install.

[s]I will pay someone $50 via paypal to deliver to me a working .iso that will allow me to install windows on my computer (I will supply my own key) EDIT: Resolved.  My specific hardware is supposedly the Silicon IMages 3512A and has rom version 4.3.43.  Contact me via IM.

msn: (removed)

Last edited by sam1am (2008-02-14 15:23:21)

111 Reply by cdob

  • cdob
  • DriverPacks Guru
  • Offline
  • Registered: 2006-08-13
  • Posts: 270

Re: [BSOD] 0x0000007B Error with MassStorage 7.12 (Si3112r, ATI SB450)

Acutally a SiI3132 example, but there is a full Hardware ID list.
As known Silicon Image offers different firmware files.
http://www.siliconimage.com/support/ind … cid=3&

catdog6 flashed different firmware and deliverd full HardwareList
http://www.911cd.net/forums//index.php? … p;p=142234

I flashed the firmware with the b7405 and the r7405. Here are the results.

B7405

PCI\VEN_1095&DEV_3132&SUBSYS_31321095&REV_01\4&2D8B019B&0&00E4
Name: Mass Storage Controller
Hardware ID's:
PCI\VEN_1095&DEV_3132&SUBSYS_31321095&REV_01
PCI\VEN_1095&DEV_3132&SUBSYS_31321095
PCI\VEN_1095&DEV_3132&CC_018000
PCI\VEN_1095&DEV_3132&CC_0180
Compatible ID's:
PCI\VEN_1095&DEV_3132&REV_01
PCI\VEN_1095&DEV_3132
PCI\VEN_1095&CC_018000
PCI\VEN_1095&CC_0180
PCI\VEN_1095
PCI\CC_018000
PCI\CC_0180
1 matching device(s) found.

Here's the R7405

PCI\VEN_1095&DEV_3132&SUBSYS_71321095&REV_01\4&2D8B019B&0&00E4
Name: RAID Controller
Hardware ID's:
PCI\VEN_1095&DEV_3132&SUBSYS_71321095&REV_01
PCI\VEN_1095&DEV_3132&SUBSYS_71321095
PCI\VEN_1095&DEV_3132&CC_010400
PCI\VEN_1095&DEV_3132&CC_0104
Compatible ID's:
PCI\VEN_1095&DEV_3132&REV_01
PCI\VEN_1095&DEV_3132
PCI\VEN_1095&CC_010400
PCI\VEN_1095&CC_0104
PCI\VEN_1095
PCI\CC_010400
PCI\CC_0104
1 matching device(s) found.

This HardwareID classify different firmware at this example:
PCI\VEN_1095&DEV_3132&CC_0180 : B7405
PCI\VEN_1095&DEV_3132&CC_0104 : R7405

Can this be used at PCI\VEN_1095&DEV_3112&CC_0104 and PCI\VEN_1095&DEV_3132&CC_0180 too?

What about enhancing 'HWID Tool'? Store 'devcon.exe hwids "PCI\CC_01*"' too?
Some driver inf files use CC_01*.
Knowing full Hardware ID list may get clearer results.
In addition there maybe new solutions possible in future. e.g. use REV_*

112 Reply by Jaak

  • Jaak
  • Old Timer Rookie
  • Offline
  • From: Eeklo, in the East Flanders
  • Registered: 2006-07-23
  • Posts: 3,594

Re: [BSOD] 0x0000007B Error with MassStorage 7.12 (Si3112r, ATI SB450)

sam1sam
http://driverpacks.net/DriverPacks/changelog.php?pag=m

The answer was 42?
Kind regards, Jaak.
  • sam1am
  • DriverPacks newbie
  • Offline
  • Registered: 2008-02-12
  • Posts: 5

Re: [BSOD] 0x0000007B Error with MassStorage 7.12 (Si3112r, ATI SB450)

Burned through about 10 more CDs today with no luck.  If I can even get far enough I still get the BSOD.

I figured out a way to jimmy rig a floppy drive in there to try to load the drivers using the F6 method.  Drivers load okay, installation proceeds, recognizes the drive, and everything looks great.  Upon trying to copy the install files to the drive, I get a prompt to put the "Silicon IMage Sil 3x12 SATALink Driver Installation Disk into drive A:"  When I hit enter, it does not read from the disk or the CD rom, just sits there.  I confirmed with the manufacturer that I am using the correct drivers, XP install just doesn't seem to hold onto them, nor can it find them again.

Last edited by sam1am (2008-02-13 13:08:29)

114 Reply by Jaak

  • Jaak
  • Old Timer Rookie
  • Offline
  • From: Eeklo, in the East Flanders
  • Registered: 2006-07-23
  • Posts: 3,594

Re: [BSOD] 0x0000007B Error with MassStorage 7.12 (Si3112r, ATI SB450)

Hi,
you have the driver on floppy.
(Which version? can you post a download link?)

what can you try?
you can use nLite and integrate ONLY that floppy onto fresh copy of install CD.
Nothing else.
No DriverPacks at all.
Try to get running with that.

The answer was 42?
Kind regards, Jaak.

115 Reply by Jaak

  • Jaak
  • Old Timer Rookie
  • Offline
  • From: Eeklo, in the East Flanders
  • Registered: 2006-07-23
  • Posts: 3,594

Re: [BSOD] 0x0000007B Error with MassStorage 7.12 (Si3112r, ATI SB450)

Hi
I just came across some interesting reading, involving maxtor drives and sil 3512a.
http://icrontic.com/forum/showthread.php?t=29398

My thinking is that this staggered spinup is messing with you, (what could be the case if you use a maxtor), you should consider another model or another brand.

The answer was 42?
Kind regards, Jaak.
  • sam1am
  • DriverPacks newbie
  • Offline
  • Registered: 2008-02-12
  • Posts: 5

Re: [BSOD] 0x0000007B Error with MassStorage 7.12 (Si3112r, ATI SB450)

I spent way to much time dealing with this and went out and got a new computer instead.

Installed XP on the new computer's SATA drive, no problem.

Installed Ubuntu on the trouble computer, no problem.

Everything is working now, and I can finally get some sleep.

  • JakeLD
  • Moderator, Sysprep & BartPE Master
  • Offline
  • From: Montreal, Canada
  • Registered: 2007-07-05
  • Posts: 872

Re: [BSOD] 0x0000007B Error with MassStorage 7.12 (Si3112r, ATI SB450)

smart move....

Read BEFORE you post  HWID's Tool  DriverPacks tutorial  DriverForge & FindHWIDs

http://d1syubgj0w3cyv.cloudfront.net/cdn/farfuture/n4W97qgvXb9IR64MNwT_BbnsRgjGDd0hpeGIqqmpZZ0/perpetual:forever/userbar/team-2.png

Donate!

JakeLD's Website

118 Reply by -G6R-

  • -G6R-
  • DriverPacks newbie
  • Offline
  • Registered: 2008-02-25
  • Posts: 2

Re: [BSOD] 0x0000007B Error with MassStorage 7.12 (Si3112r, ATI SB450)

Hello, my english isn't ... you will see ;-)

I'm having an Asus A7N8X-E Deluxe Motherboard.

Geräteeigenschaften   
Gerätebeschreibung    RAID-Controller
Hardwarekennung    PCI\VEN_1095&DEV_3112&SUBSYS_61121095&REV_01
Positionsinformationen    PCI-Bus 1, Gerät 11, Funktion 0
PCI-Geräte    Silicon Image SiI 3112 SATARaid Controller

I actually made an XPSP3 CD with the newest DPBase Massstorage Drivers ONLY txtmode integration.

When I tryed to install from CD I got this damn Stop 0x000...7B Message.
So I tryed to load the driver from Floppy but I think the driver integrated was newer so that was no solution.

Then I had a look what driverpackbase changes on the CD and did the following.
I copied the contend of my new XPSP3 CD to my harddisc. and removed all entries guiding to the si3112.sys and 3112RX47.sys
I also removed the winnt.sif and the $OEM$ Folder. (just for Info)

I burned the "new" CD and now the Installation works even without loading the driver from Floppy

Here my new Dosnet.inf and TXTSetup.sif

http://home.arcor.de/-G6R-/DPBASE/DOSNET.INF
http://home.arcor.de/-G6R-/DPBASE/TXTSETUP.SIF

119 Reply by Jaak

  • Jaak
  • Old Timer Rookie
  • Offline
  • From: Eeklo, in the East Flanders
  • Registered: 2006-07-23
  • Posts: 3,594

Re: [BSOD] 0x0000007B Error with MassStorage 7.12 (Si3112r, ATI SB450)

can you please look in control panel's device manager?
I want to know if it says silicon, adaptec, or LSI MegaRAID.

EDIT; (hmmm.. PnP would still find the driver. In TXTmode, I find ash1205 and megaIDE which also have silicon 3112 HWIDS)

Last edited by Jaak (2008-02-25 06:00:10)

The answer was 42?
Kind regards, Jaak.

120 Reply by -G6R-

  • -G6R-
  • DriverPacks newbie
  • Offline
  • Registered: 2008-02-25
  • Posts: 2

Re: [BSOD] 0x0000007B Error with MassStorage 7.12 (Si3112r, ATI SB450)

http://img185.imageshack.us/img185/9504/raidmn8.th.jpg

for me it hasn't installed a driver for the Raid Controler.
But Windows recognized my 2 Samsung S-ATA disks an could install Windows on one of them.
Edit:
Just before I have to puch "F8" for the licens blabla it writes at the bottom of the screen
Samsung SP... an ASH1205

Last edited by -G6R- (2008-02-25 11:09:23)

121 Reply by Larry

  • Larry
  • DriverPacks newbie
  • Offline
  • Registered: 2009-11-01
  • Posts: 3

Re: [BSOD] 0x0000007B Error with MassStorage 7.12 (Si3112r, ATI SB450)

Hello guys, Great site!  I ran into a problem that appears has been solved in reading this thread.  I have an A7n8x-E deluxe MB which has SataLink controller using SI3112r driver.  I'm not using the RAID option. Loaded XPSP3 and I get BSODs.  Rolled back to SP2 and no problems.
Jaak - I realize this is almost 2 years old... but did this driver get updated (see 2-08-08 post)?  I could not find it in the mass storage driver packs.
Thanks!

  • OverFlow
  • DriverPacks Administrator & BASE Developer
  • Offline
  • From: Cincinnati
  • Registered: 2006-12-02
  • Posts: 6,730

Re: [BSOD] 0x0000007B Error with MassStorage 7.12 (Si3112r, ATI SB450)

Welcome to DriverPacks.

Can you post your 3112s HWIDs using the tool in my signature?

did you install useing the DriverPacks?
If so could you please specifiy the version of BASE used to slipstream AND the version of DriverPack MassStorage used.
Alternately post your DPs_BASE.log

thanks for reporting and for useing search to find related issues

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

OverFlow's Website

123 Reply by Larry

  • Larry
  • DriverPacks newbie
  • Offline
  • Registered: 2009-11-01
  • Posts: 3

Re: [BSOD] 0x0000007B Error with MassStorage 7.12 (Si3112r, ATI SB450)

I didn't install using the Driverpacks; I used what was on the ASUS Utilities CD.
I should note that this computer was running a mirrored RAID setup until a couple of days ago (5+years, minimal problems other than lots of "filler" all over the place.  It needed to be flattened and reloaded.
I did that to only one of the HDD's, the other I haven't touched; i.e. currently the reload is not a RAID setup.

Here are the HWIDs:

=========== 
PCI Devices 
=========== 
PCI\VEN_1002&DEV_4150&SUBSYS_47221002&REV_00\4&102AC5BC&0&00F0: RADEON 9600 PRO Family (Microsoft Corporation)
PCI\VEN_1002&DEV_4170&SUBSYS_47231002&REV_00\4&102AC5BC&0&01F0: RADEON 9600 PRO SEC Family (Microsoft Corporation)
PCI\VEN_1095&DEV_3112&SUBSYS_61121095&REV_02\4&3B1D9AB8&0&5840: Silicon Image SiI 3112 SATARaid Controller
PCI\VEN_10DE&DEV_0060&SUBSYS_00000000&REV_A4\3&13C0B0C5&0&08: PCI standard ISA bridge
PCI\VEN_10DE&DEV_0064&SUBSYS_0C111043&REV_A2\3&13C0B0C5&0&09: NVIDIA nForce PCI System Management
PCI\VEN_10DE&DEV_0065&SUBSYS_0C111043&REV_A2\3&13C0B0C5&0&48: NVIDIA nForce2 IDE Controller
PCI\VEN_10DE&DEV_0066&SUBSYS_80A71043&REV_A1\3&13C0B0C5&0&20: NVIDIA nForce MCP Networking Controller
PCI\VEN_10DE&DEV_0067&SUBSYS_0C111043&REV_A4\3&13C0B0C5&0&10: Standard OpenHCD USB Host Controller
PCI\VEN_10DE&DEV_0067&SUBSYS_0C111043&REV_A4\3&13C0B0C5&0&11: Standard OpenHCD USB Host Controller
PCI\VEN_10DE&DEV_0068&SUBSYS_0C111043&REV_A4\3&13C0B0C5&0&12: Standard Enhanced PCI to USB Host Controller
PCI\VEN_10DE&DEV_006A&SUBSYS_80951043&REV_A1\3&13C0B0C5&0&30: NVIDIA(R) nForce(TM) Audio Codec Interface
PCI\VEN_10DE&DEV_006B&SUBSYS_0C111043&REV_A2\3&13C0B0C5&0&28: NVIDIA(R) nForce(TM) MCP Audio Processing Unit (Dolby(R) Digital)
PCI\VEN_10DE&DEV_006C&SUBSYS_00000000&REV_A3\3&13C0B0C5&0&40: PCI standard PCI-to-PCI bridge
PCI\VEN_10DE&DEV_006E&SUBSYS_809A1043&REV_A3\3&13C0B0C5&0&68: OHCI Compliant IEEE 1394 Host Controller
PCI\VEN_10DE&DEV_01E0&SUBSYS_00000000&REV_C1\3&13C0B0C5&0&00: PCI standard host CPU bridge
PCI\VEN_10DE&DEV_01E8&SUBSYS_00000000&REV_C1\3&13C0B0C5&0&F0: NVIDIA nForce2 AGP Host to PCI Bridge
PCI\VEN_10DE&DEV_01EB&SUBSYS_80AC1043&REV_C1\3&13C0B0C5&0&01: PCI standard RAM Controller
PCI\VEN_10DE&DEV_01EC&SUBSYS_80AC1043&REV_C1\3&13C0B0C5&0&04: PCI standard RAM Controller
PCI\VEN_10DE&DEV_01ED&SUBSYS_80AC1043&REV_C1\3&13C0B0C5&0&03: PCI standard RAM Controller
PCI\VEN_10DE&DEV_01EE&SUBSYS_80AC1043&REV_C1\3&13C0B0C5&0&02: PCI standard RAM Controller
PCI\VEN_10DE&DEV_01EF&SUBSYS_80AC1043&REV_C1\3&13C0B0C5&0&05: PCI standard RAM Controller
PCI\VEN_11AB&DEV_4320&SUBSYS_811A1043&REV_13\4&3B1D9AB8&0&2040: Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter, Copper RJ-45
22 matching device(s) found.
 
=========== 
USB Devices 
=========== 
USB\ROOT_HUB\4&36CE346&0                                    : USB Root Hub
USB\ROOT_HUB\4&37090E00&0                                   : USB Root Hub
USB\ROOT_HUB20\4&B74B78&0                                   : USB Root Hub
USB\VID_03F0&PID_1B05\CN668TA1KQ                            : HP Scanjet Scanner
USB\VID_03F0&PID_B402\MY37P13133JY                          : USB Composite Device
USB\VID_03F0&PID_B402&MI_00\7&1172F336&0&0000               : USB Printing Support
USB\VID_03F0&PID_B402&MI_01\7&1172F336&0&0001               : photosmart 7700 series
USB\VID_03F0&PID_B402&MI_02\7&1172F336&0&0002               : USB Mass Storage Device
USB\VID_046D&PID_C00E\5&DF9F058&0&2                         : Logitech USB Wheel Mouse
USB\VID_05E3&PID_0608\5&221832C9&0&1                        : Generic USB Hub
USB\VID_09AE&PID_2005\692195_A_                             : USB Human Interface Device
USBPRINT\HPPHOTOSMART_7700_SERIES\8&250224A5&0&USB001       : hpphotosmart 7700 series
USBSTOR\DISK&VEN_HP&PROD_PHOTOSMART_7700&REV_1.00\8&1C19CBC9&0&MY37P13133JY&0: HP photosmart 7700 USB Device
13 matching device(s) found.
 
============= 
Input Devices 
============= 
HID\VID_046D&PID_C00E\6&1B8A61E4&0&0000                     : Logitech USB Wheel Mouse
HID\VID_09AE&PID_2005\6&3629787D&0&0000                     : HID UPS Battery
2 matching device(s) found.
 
============ 
ACPI Devices 
============ 
ACPI\AUTHENTICAMD_-_X86_FAMILY_6_MODEL_10\_0                : AMD Athlon(tm) XP 2800+
ACPI\FIXEDBUTTON\2&DABA3FF&0                                : ACPI Fixed Feature Button
ACPI\PNP0000\3&13C0B0C5&0                                   : Programmable interrupt controller
ACPI\PNP0100\3&13C0B0C5&0                                   : System timer
ACPI\PNP0200\3&13C0B0C5&0                                   : Direct memory access controller
ACPI\PNP0303\3&13C0B0C5&0                                   : Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
ACPI\PNP0401\3&13C0B0C5&0                                   : ECP Printer Port (LPT1)
ACPI\PNP0501\1                                              : Communications Port (COM1)
ACPI\PNP0501\2                                              : Communications Port (COM2)
ACPI\PNP0700\3&13C0B0C5&0                                   : Standard floppy disk controller
ACPI\PNP0800\3&13C0B0C5&0                                   : System speaker
ACPI\PNP0A03\1                                              : PCI bus
ACPI\PNP0B00\3&13C0B0C5&0                                   : System CMOS/real time clock
ACPI\PNP0C01\2&DABA3FF&0                                    : System board
ACPI\PNP0C02\1                                              : Motherboard resources
ACPI\PNP0C02\3                                              : Motherboard resources
ACPI\PNP0C02\4                                              : Motherboard resources
ACPI\PNP0C04\3&13C0B0C5&0                                   : Numeric data processor
ACPI\PNP0C0C\2&DABA3FF&0                                    : ACPI Power Button
ACPI\PNPB006\3&13C0B0C5&0                                   : MPU-401 Compatible MIDI Device
ACPI\PNPB02F\3&13C0B0C5&0                                   : Standard Game Port
ACPI_HAL\PNP0C08\0                                          : Microsoft ACPI-Compliant System
ROOT\ACPI_HAL\0000                                          : ACPI Uniprocessor PC
23 matching device(s) found.
 
============ 
 HDA Audio 
============ 
No matching devices found.
 
============ 
RAID Devices 
============ 
PCI\VEN_1095&DEV_3112&SUBSYS_61121095&REV_02\4&3B1D9AB8&0&5840
    Name: Silicon Image SiI 3112 SATARaid Controller
    Hardware ID's:
        PCI\VEN_1095&DEV_3112&SUBSYS_61121095&REV_02
        PCI\VEN_1095&DEV_3112&SUBSYS_61121095
        PCI\VEN_1095&DEV_3112&CC_010400
        PCI\VEN_1095&DEV_3112&CC_0104
    Compatible ID's:
        PCI\VEN_1095&DEV_3112&REV_02
        PCI\VEN_1095&DEV_3112
        PCI\VEN_1095&CC_010400
        PCI\VEN_1095&CC_0104
        PCI\VEN_1095
        PCI\CC_010400
        PCI\CC_0104
PCI\VEN_10DE&DEV_0065&SUBSYS_0C111043&REV_A2\3&13C0B0C5&0&48
    Name: NVIDIA nForce2 IDE Controller
    Hardware ID's:
        PCI\VEN_10DE&DEV_0065&SUBSYS_0C111043&REV_A2
        PCI\VEN_10DE&DEV_0065&SUBSYS_0C111043
        PCI\VEN_10DE&DEV_0065&CC_01018A
        PCI\VEN_10DE&DEV_0065&CC_0101
    Compatible ID's:
        PCI\VEN_10DE&DEV_0065&REV_A2
        PCI\VEN_10DE&DEV_0065
        PCI\VEN_10DE&CC_01018A
        PCI\VEN_10DE&CC_0101
        PCI\VEN_10DE
        PCI\CC_01018A
        PCI\CC_0101
2 matching device(s) found.
----------------------------

For reference here is what is in the txtsetup.oem:

; This file installs the SiI 3x12 SATARaid driver as part of text
; mode setup on Windows NT, Windows 2000, Windows XP, and Windows Server 2003.
;
; Copyright (C) 2002-2003 by Silicon Image, Inc.
; All rights reserved



[Disks]
disk1 = "Silicon Image SiI 3x12 SATARaid Driver Installation Disk",\Si3112r.sys,\

[Defaults]
SCSI = Si3112r_XP

[SCSI]                  ; HwComponent section
Si3112r_XP = "Silicon Image SiI 3x12 SATARaid Controller for Windows XP/Server 2003"
Si3112r_NT = "Silicon Image SiI 3x12 SATARaid Controller for Windows NT 4.0 and 2000"

[Files.SCSI.Si3112r_XP]
driver = disk1,si3112r.sys, Si3112r
driver = disk1,SiWinAcc.sys, SiFilter
inf = disk1,Si3112r.inf
;;catalog = disk1, Si3112r.cat


[Files.SCSI.Si3112r_NT]
driver = disk1,si3112r.sys, Si3112r
inf = disk1,Si3112r.inf
;;catalog = disk1, Si3112r.cat


[HardwareIds.SCSI.Si3112r]
id = "PCI\VEN_1095&DEV_3112&SUBSYS_61121095", "Si3112r"
id = "PCI\VEN_1095&DEV_3112&SUBSYS_611215D9", "Si3112r"
id = "PCI\VEN_1095&DEV_3112&SUBSYS_34228086", "Si3112r"
id = "PCI\VEN_1095&DEV_3112&SUBSYS_B0031458", "Si3112r"
id = "PCI\VEN_1095&DEV_3112&SUBSYS_A0111019", "Si3112r"
id = "PCI\VEN_1095&DEV_3112&SUBSYS_A0121019", "Si3112r"
id = "PCI\VEN_1095&DEV_3112&SUBSYS_A0131019", "Si3112r"
id = "PCI\VEN_1095&DEV_3112&SUBSYS_A0141019", "Si3112r"
id = "PCI\VEN_1095&DEV_3112&SUBSYS_A0151019", "Si3112r"
id = "PCI\VEN_1095&DEV_3112&SUBSYS_1014147B", "Si3112r"
id = "PCI\VEN_1095&DEV_3112&SUBSYS_100B147B", "Si3112r"
id = "PCI\VEN_1095&DEV_3112&SUBSYS_1402147B", "Si3112r"
id = "PCI\VEN_1095&DEV_3112&SUBSYS_1404147B", "Si3112r"
id = "PCI\VEN_1095&DEV_3112&SUBSYS_1802147B", "Si3112r"
id = "PCI\VEN_1095&DEV_3112&SUBSYS_1804147B", "Si3112r"
id = "PCI\VEN_1095&DEV_3112&SUBSYS_1C00147B", "Si3112r"
id = "PCI\VEN_1095&DEV_3112&SUBSYS_5930107D", "Si3112r"
id = "PCI\VEN_1095&DEV_3112&SUBSYS_249510F1", "Si3112r"
id = "PCI\VEN_1095&DEV_3112&SUBSYS_809D1043", "Si3112r"
id = "PCI\VEN_1095&DEV_3112&SUBSYS_0270A0A0", "Si3112r"
id = "PCI\VEN_1095&DEV_3112&SUBSYS_044DA0A0", "Si3112r"
id = "PCI\VEN_1095&DEV_3112&SUBSYS_044CA0A0", "Si3112r"
id = "PCI\VEN_1095&DEV_3112&SUBSYS_92011905", "Si3112r"
id = "PCI\VEN_1095&DEV_3112&SUBSYS_92151905", "Si3112r"
id = "PCI\VEN_1095&DEV_3112&SUBSYS_904C1905", "Si3112r"
id = "PCI\VEN_1095&DEV_3112&SUBSYS_904B1905", "Si3112r"
id = "PCI\VEN_1095&DEV_3112&SUBSYS_A41810FD", "Si3112r"
id = "PCI\VEN_1095&DEV_3112&SUBSYS_A41910FD", "Si3112r"
id = "PCI\VEN_1095&DEV_3112&SUBSYS_A71910FD", "Si3112r"
id = "PCI\VEN_1095&DEV_3112&SUBSYS_90171695", "Si3112r"
id = "PCI\VEN_1095&DEV_3112&SUBSYS_C2001297", "Si3112r"
id = "PCI\VEN_1095&DEV_3112&SUBSYS_C2011297", "Si3112r"
id = "PCI\VEN_1095&DEV_3112&SUBSYS_15D40035", "Si3112r"
id = "PCI\VEN_1095&DEV_3512&SUBSYS_65121095", "Si3112r"
id = "PCI\VEN_1095&DEV_3512&SUBSYS_B0031458", "Si3112r"
id = "PCI\VEN_1095&DEV_3512&SUBSYS_1014147B", "Si3112r"
id = "PCI\VEN_1095&DEV_3512&SUBSYS_1021147B", "Si3112r"
id = "PCI\VEN_1095&DEV_3512&SUBSYS_100B147B", "Si3112r"
id = "PCI\VEN_1095&DEV_3512&SUBSYS_1C06147B", "Si3112r"
id = "PCI\VEN_1095&DEV_3512&SUBSYS_1C00147B", "Si3112r"
id = "PCI\VEN_1095&DEV_3512&SUBSYS_1C03147B", "Si3112r"
id = "PCI\VEN_1095&DEV_3512&SUBSYS_1C04147B", "Si3112r"
id = "PCI\VEN_1095&DEV_3512&SUBSYS_1406147B", "Si3112r"
id = "PCI\VEN_1095&DEV_3512&SUBSYS_1407147B", "Si3112r"
id = "PCI\VEN_1095&DEV_3512&SUBSYS_90191695", "Si3112r"
id = "PCI\VEN_1095&DEV_3512&SUBSYS_C2021297", "Si3112r"
id = "PCI\VEN_1095&DEV_3512&SUBSYS_C2031297", "Si3112r"
id = "PCI\VEN_1095&DEV_3512&SUBSYS_C2041297", "Si3112r"

[Config.Si3112r]
value = ProblemDevices, "", REG_SZ, ""
value = ProblemDevices, "Maxtor 4D060H3                          DAK05GK0", REG_SZ, "MaxMode = UDMA-5"
value = ProblemDevices, "ST320012AS", REG_SZ, "Mod15Write"
value = ProblemDevices, "ST330013AS", REG_SZ, "Mod15Write"
value = ProblemDevices, "ST340017AS", REG_SZ, "Mod15Write"
value = ProblemDevices, "ST360015AS", REG_SZ, "Mod15Write"
value = ProblemDevices, "ST380023AS", REG_SZ, "Mod15Write"
value = ProblemDevices, "ST3120023AS", REG_SZ, "Mod15Write"
value = ProblemDevices, "ST340014ASL", REG_SZ, "Mod15Write"
value = ProblemDevices, "ST360014ASL", REG_SZ, "Mod15Write"
value = ProblemDevices, "ST380011ASL", REG_SZ, "Mod15Write"
value = ProblemDevices, "ST3120022ASL", REG_SZ, "Mod15Write"
value = ProblemDevices, "ST3160021ASL", REG_SZ, "Mod15Write"
  • OverFlow
  • DriverPacks Administrator & BASE Developer
  • Offline
  • From: Cincinnati
  • Registered: 2006-12-02
  • Posts: 6,730

Re: [BSOD] 0x0000007B Error with MassStorage 7.12 (Si3112r, ATI SB450)

You might try updateing the driver either by useing a SIS reference driver
or you could use DriverPacks BASE to create a SAD folder with our DriverPack MassStorage then run DP_Inst_tool.cmd.

The most likely primary cause is your Firmware version on the si3112.
the newest versons of the si3112 driver do not support the older firmware.
It is also possable (I don't remember for sure) that SP3 includes a newer 3112 driver. (that is not backward compatable with your chipsets firmware.)

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

OverFlow's Website

125 Reply by Larry

  • Larry
  • DriverPacks newbie
  • Offline
  • Registered: 2009-11-01
  • Posts: 3

Re: [BSOD] 0x0000007B Error with MassStorage 7.12 (Si3112r, ATI SB450)

Reloaded SP3 and checked the driver file. Tried to revert to previous version but there was none.  About 5 minutes in, got BSOD with STOP.
I checked the drivers folder - the driver has the same date as original.
One other thing to check- back out SP3 and see if it is stable for longer than 10 minutes (i'll let it go for a few hours).
Next is to get smart on a few terms and use of DriverPacks BASE, etc.(SIS Ref Driver?, SAD folder?). Fortunately not my main machine; unfortunately not enough time to spend on this...
anyway,
Here is what was on the screen:
DRIVER_IRQL_NOT_LESS_OR_EQUAL
STOP: 0X000000D1 (0X0000002A,0X00000006,0X00000000,0X748BAFB)
SI3112r.sys - address fF748BAFB base at F7484000, Datestamp 3ed7e3b9.
Here's the HWIDs:
===========
PCI Devices
===========
PCI\VEN_1002&DEV_4150&SUBSYS_47221002&REV_00\4&102AC5BC&0&00F0: RADEON 9600 PRO Family (Microsoft Corporation)
PCI\VEN_1002&DEV_4170&SUBSYS_47231002&REV_00\4&102AC5BC&0&01F0: RADEON 9600 PRO SEC Family (Microsoft Corporation)
PCI\VEN_1095&DEV_3112&SUBSYS_61121095&REV_02\4&3B1D9AB8&0&5840: Silicon Image SiI 3112 SATARaid Controller
PCI\VEN_10DE&DEV_0060&SUBSYS_00000000&REV_A4\3&13C0B0C5&0&08: PCI standard ISA bridge
PCI\VEN_10DE&DEV_0064&SUBSYS_0C111043&REV_A2\3&13C0B0C5&0&09: NVIDIA nForce PCI System Management
PCI\VEN_10DE&DEV_0065&SUBSYS_0C111043&REV_A2\3&13C0B0C5&0&48: NVIDIA nForce2 IDE Controller
PCI\VEN_10DE&DEV_0066&SUBSYS_80A71043&REV_A1\3&13C0B0C5&0&20: NVIDIA nForce MCP Networking Controller
PCI\VEN_10DE&DEV_0067&SUBSYS_0C111043&REV_A4\3&13C0B0C5&0&10: Standard OpenHCD USB Host Controller
PCI\VEN_10DE&DEV_0067&SUBSYS_0C111043&REV_A4\3&13C0B0C5&0&11: Standard OpenHCD USB Host Controller
PCI\VEN_10DE&DEV_0068&SUBSYS_0C111043&REV_A4\3&13C0B0C5&0&12: Standard Enhanced PCI to USB Host Controller
PCI\VEN_10DE&DEV_006A&SUBSYS_80951043&REV_A1\3&13C0B0C5&0&30: NVIDIA(R) nForce(TM) Audio Codec Interface
PCI\VEN_10DE&DEV_006B&SUBSYS_0C111043&REV_A2\3&13C0B0C5&0&28: NVIDIA(R) nForce(TM) MCP Audio Processing Unit (Dolby(R) Digital)
PCI\VEN_10DE&DEV_006C&SUBSYS_00000000&REV_A3\3&13C0B0C5&0&40: PCI standard PCI-to-PCI bridge
PCI\VEN_10DE&DEV_006E&SUBSYS_809A1043&REV_A3\3&13C0B0C5&0&68: OHCI Compliant IEEE 1394 Host Controller
PCI\VEN_10DE&DEV_01E0&SUBSYS_00000000&REV_C1\3&13C0B0C5&0&00: PCI standard host CPU bridge
PCI\VEN_10DE&DEV_01E8&SUBSYS_00000000&REV_C1\3&13C0B0C5&0&F0: NVIDIA nForce2 AGP Host to PCI Bridge
PCI\VEN_10DE&DEV_01EB&SUBSYS_80AC1043&REV_C1\3&13C0B0C5&0&01: PCI standard RAM Controller
PCI\VEN_10DE&DEV_01EC&SUBSYS_80AC1043&REV_C1\3&13C0B0C5&0&04: PCI standard RAM Controller
PCI\VEN_10DE&DEV_01ED&SUBSYS_80AC1043&REV_C1\3&13C0B0C5&0&03: PCI standard RAM Controller
PCI\VEN_10DE&DEV_01EE&SUBSYS_80AC1043&REV_C1\3&13C0B0C5&0&02: PCI standard RAM Controller
PCI\VEN_10DE&DEV_01EF&SUBSYS_80AC1043&REV_C1\3&13C0B0C5&0&05: PCI standard RAM Controller
PCI\VEN_11AB&DEV_4320&SUBSYS_811A1043&REV_13\4&3B1D9AB8&0&2040: Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter, Copper RJ-45
22 matching device(s) found.

===========
USB Devices
===========
USB\ROOT_HUB\4&36CE346&0                                    : USB Root Hub
USB\ROOT_HUB\4&37090E00&0                                   : USB Root Hub
USB\ROOT_HUB20\4&B74B78&0                                   : USB Root Hub
USB\VID_03F0&PID_1B05\CN668TA1KQ                            : HP Scanjet Scanner
USB\VID_03F0&PID_B402\MY37P13133JY                          : USB Composite Device
USB\VID_03F0&PID_B402&MI_00\7&1172F336&0&0000               : USB Printing Support
USB\VID_03F0&PID_B402&MI_01\7&1172F336&0&0001               : photosmart 7700 series
USB\VID_03F0&PID_B402&MI_02\7&1172F336&0&0002               : USB Mass Storage Device
USB\VID_046D&PID_C00E\5&DF9F058&0&2                         : Logitech USB Wheel Mouse
USB\VID_05E3&PID_0608\5&221832C9&0&1                        : Generic USB Hub
USB\VID_09AE&PID_2005\692195_A_                             : USB Human Interface Device
USBPRINT\HPPHOTOSMART_7700_SERIES\8&250224A5&0&USB001       : hpphotosmart 7700 series
USBSTOR\DISK&VEN_HP&PROD_PHOTOSMART_7700&REV_1.00\8&1C19CBC9&0&MY37P13133JY&0: HP photosmart 7700 USB Device
13 matching device(s) found.

=============
Input Devices
=============
HID\VID_046D&PID_C00E\6&1B8A61E4&0&0000                     : Logitech USB Wheel Mouse
HID\VID_09AE&PID_2005\6&3629787D&0&0000                     : HID UPS Battery
2 matching device(s) found.

============
ACPI Devices
============
ACPI\AUTHENTICAMD_-_X86_FAMILY_6_MODEL_10\_0                : AMD Athlon(tm) XP 2800+
ACPI\FIXEDBUTTON\2&DABA3FF&0                                : ACPI Fixed Feature Button
ACPI\PNP0000\3&13C0B0C5&0                                   : Programmable interrupt controller
ACPI\PNP0100\3&13C0B0C5&0                                   : System timer
ACPI\PNP0200\3&13C0B0C5&0                                   : Direct memory access controller
ACPI\PNP0303\3&13C0B0C5&0                                   : Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
ACPI\PNP0401\3&13C0B0C5&0                                   : ECP Printer Port (LPT1)
ACPI\PNP0501\1                                              : Communications Port (COM1)
ACPI\PNP0501\2                                              : Communications Port (COM2)
ACPI\PNP0700\3&13C0B0C5&0                                   : Standard floppy disk controller
ACPI\PNP0800\3&13C0B0C5&0                                   : System speaker
ACPI\PNP0A03\1                                              : PCI bus
ACPI\PNP0B00\3&13C0B0C5&0                                   : System CMOS/real time clock
ACPI\PNP0C01\2&DABA3FF&0                                    : System board
ACPI\PNP0C02\1                                              : Motherboard resources
ACPI\PNP0C02\3                                              : Motherboard resources
ACPI\PNP0C02\4                                              : Motherboard resources
ACPI\PNP0C04\3&13C0B0C5&0                                   : Numeric data processor
ACPI\PNP0C0C\2&DABA3FF&0                                    : ACPI Power Button
ACPI\PNPB006\3&13C0B0C5&0                                   : MPU-401 Compatible MIDI Device
ACPI\PNPB02F\3&13C0B0C5&0                                   : Standard Game Port
ACPI_HAL\PNP0C08\0                                          : Microsoft ACPI-Compliant System
ROOT\ACPI_HAL\0000                                          : ACPI Uniprocessor PC
23 matching device(s) found.

============
HDA Audio
============
No matching devices found.

============
RAID Devices
============
PCI\VEN_1095&DEV_3112&SUBSYS_61121095&REV_02\4&3B1D9AB8&0&5840
    Name: Silicon Image SiI 3112 SATARaid Controller
    Hardware ID's:
        PCI\VEN_1095&DEV_3112&SUBSYS_61121095&REV_02
        PCI\VEN_1095&DEV_3112&SUBSYS_61121095
        PCI\VEN_1095&DEV_3112&CC_010400
        PCI\VEN_1095&DEV_3112&CC_0104
    Compatible ID's:
        PCI\VEN_1095&DEV_3112&REV_02
        PCI\VEN_1095&DEV_3112
        PCI\VEN_1095&CC_010400
        PCI\VEN_1095&CC_0104
        PCI\VEN_1095
        PCI\CC_010400
        PCI\CC_0104
PCI\VEN_10DE&DEV_0065&SUBSYS_0C111043&REV_A2\3&13C0B0C5&0&48
    Name: NVIDIA nForce2 IDE Controller
    Hardware ID's:
        PCI\VEN_10DE&DEV_0065&SUBSYS_0C111043&REV_A2
        PCI\VEN_10DE&DEV_0065&SUBSYS_0C111043
        PCI\VEN_10DE&DEV_0065&CC_01018A
        PCI\VEN_10DE&DEV_0065&CC_0101
    Compatible ID's:
        PCI\VEN_10DE&DEV_0065&REV_A2
        PCI\VEN_10DE&DEV_0065
        PCI\VEN_10DE&CC_01018A
        PCI\VEN_10DE&CC_0101
        PCI\VEN_10DE
        PCI\CC_01018A
        PCI\CC_0101
2 matching device(s) found.

interesting that the BSOD seems to happen quicker each time-to a  point.  Usually taking about 30 seconds after login.
One other possibility- IRQ problem?
Thanks,
Larry