I think the drives messed up. I can't get it to behave on any PC. I'll come back when I get hold of another to test.
sorry to use up your time...
51 2012-03-02 06:19:40
Re: [SLVD] Not able to setup windows (12 replies, posted in DriverPack Mass Storage)
52 2012-02-29 06:09:35
Topic: [SLVD] Not able to setup windows (12 replies, posted in DriverPack Mass Storage)
Hi mr_smartepants, first off thanks for all the great work you do, it seems to go unthanked far too much.
I'm struggling to load windows on a SATA drive. But may be its just bust...
I made a new cd with
DriverPack Chipset 1201!
DriverPack Graphics A 1107!
DriverPack Graphics B 1107!
DriverPack Graphics C 1107!
DriverPack LAN 1202!
DriverPack Mass Storage 1201!
DriverPack Sound A 1111!
DriverPack Sound B 1111!
DriverPack WLAN 1202!
3rd Party DriverPack HID 1109r1!
3rd Party DriverPack Misc 1201!
3rd Party DriverPack WebCam 1107!
Which works fine using a PATA hardisk, but behaves very odd with the SATA drive I want to use on the same hardware. If I remove the PATA disc from system and plug in the SATA drive the whole PC goes on a go slow. It even takes ages to get into the BIOS. Here it shows the harddisc but loading windows isn't working, eventually I get to the bit where Windows tries to install but then I get [setup cannot access this disc] and if you press enter it blue sceens with. Any thoughts?
STOP: 0x0000008E (0C0000005, 0XF7419CAD, 0X797A7E4,0X00000000)
===========
PCI Devices
===========
PCI\VEN_10EC&DEV_8168&SUBSYS_E0001458&REV_02\4&3A0400F3&0&00E1: Realtek PCIe GBE Family Controller
PCI\VEN_8086&DEV_244E&SUBSYS_00000000&REV_E1\3&13C0B0C5&0&F0: Intel(R) 82801 PCI Bridge - 244E
PCI\VEN_8086&DEV_2770&SUBSYS_00000000&REV_02\3&13C0B0C5&0&00: Intel(R) 945G/GZ/GC/P/PL Processor to I/O Controller - 2770
PCI\VEN_8086&DEV_2772&SUBSYS_D0001458&REV_02\3&13C0B0C5&0&10: Intel(R) 82945G Express Chipset Family
PCI\VEN_8086&DEV_27B8&SUBSYS_00000000&REV_01\3&13C0B0C5&0&F8: Intel(R) ICH7 Family LPC Interface Controller - 27B8
PCI\VEN_8086&DEV_27C0&SUBSYS_B0021458&REV_01\3&13C0B0C5&0&FA: Intel(R) N10/ICH7 Family Serial ATA Storage Controller - 27C0
PCI\VEN_8086&DEV_27C8&SUBSYS_50041458&REV_01\3&13C0B0C5&0&E8: Intel(R) N10/ICH7 Family USB Universal Host Controller - 27C8
PCI\VEN_8086&DEV_27C9&SUBSYS_50041458&REV_01\3&13C0B0C5&0&E9: Intel(R) N10/ICH7 Family USB Universal Host Controller - 27C9
PCI\VEN_8086&DEV_27CA&SUBSYS_50041458&REV_01\3&13C0B0C5&0&EA: Intel(R) N10/ICH7 Family USB Universal Host Controller - 27CA
PCI\VEN_8086&DEV_27CB&SUBSYS_50041458&REV_01\3&13C0B0C5&0&EB: Intel(R) N10/ICH7 Family USB Universal Host Controller - 27CB
PCI\VEN_8086&DEV_27CC&SUBSYS_50061458&REV_01\3&13C0B0C5&0&EF: Intel(R) N10/ICH7 Family USB2 Enhanced Host Controller - 27CC
PCI\VEN_8086&DEV_27D0&SUBSYS_00000000&REV_01\3&13C0B0C5&0&E0: Intel(R) N10/ICH7 Family PCI Express Root Port - 27D0
PCI\VEN_8086&DEV_27D2&SUBSYS_00000000&REV_01\3&13C0B0C5&0&E1: Intel(R) N10/ICH7 Family PCI Express Root Port - 27D2
PCI\VEN_8086&DEV_27D8&SUBSYS_A0021458&REV_01\3&13C0B0C5&0&D8: Microsoft UAA Bus Driver for High Definition Audio
PCI\VEN_8086&DEV_27DA&SUBSYS_50011458&REV_01\3&13C0B0C5&0&FB: Intel(R) N10/ICH7 Family SMBus Controller - 27DA
PCI\VEN_8086&DEV_27DF&SUBSYS_B0011458&REV_01\3&13C0B0C5&0&F9: Intel(R) ICH7 Family Ultra ATA Storage Controllers - 27DF
16 matching device(s) found.
===========
USB Devices
===========
USB\ROOT_HUB\4&10C3B2A4&0 : USB Root Hub
USB\ROOT_HUB\4&26FCA6D4&0 : USB Root Hub
USB\ROOT_HUB\4&37690C5A&0 : USB Root Hub
USB\ROOT_HUB\4&574D1E&0 : USB Root Hub
USB\ROOT_HUB20\4&172B99F8&0 : USB Root Hub
USB\VID_045E&PID_0040\5&50ADEA6&0&1 : Microsoft USB Wheel Mouse Optical
USB\VID_0781&PID_5567\11013213D9E274A4 : USB Mass Storage Device
USBSTOR\DISK&VEN_SANDISK&PROD_CRUZER_BLADE&REV_8.02\11013213D9E274A4&0: SanDisk Cruzer Blade USB Device
8 matching device(s) found.
=============
Input Devices
=============
HID\VID_045E&PID_0040\6&2D837293&0&0000 : Microsoft USB Wheel Mouse Optical (IntelliPoint)
1 matching device(s) found.
============
ACPI Devices
============
ACPI\FIXEDBUTTON\2&DABA3FF&0 : ACPI Fixed Feature Button
ACPI\GENUINEINTEL_-_X86_FAMILY_6_MODEL_23\_0 : Intel(R) Core(TM)2 Duo CPU E7200 @ 2.53GHz
ACPI\GENUINEINTEL_-_X86_FAMILY_6_MODEL_23\_1 : Intel(R) Core(TM)2 Duo CPU E7200 @ 2.53GHz
ACPI\INT0800\2&DABA3FF&0 : Intel(R) 82802 Firmware Hub Device
ACPI\PNP0000\4&2D88FB92&0 : Programmable interrupt controller
ACPI\PNP0100\4&2D88FB92&0 : System timer
ACPI\PNP0200\4&2D88FB92&0 : Direct memory access controller
ACPI\PNP0303\4&2D88FB92&0 : PS/2 Keyboard (106 Keys Ctrl+Caps)
ACPI\PNP0400\4&2D88FB92&0 : Printer Port (LPT1)
ACPI\PNP0501\1 : Communications Port (COM1)
ACPI\PNP0700\4&2D88FB92&0 : Standard floppy disk controller
ACPI\PNP0800\4&2D88FB92&0 : System speaker
ACPI\PNP0A03\1 : PCI bus
ACPI\PNP0B00\4&2D88FB92&0 : System CMOS/real time clock
ACPI\PNP0C01\2&DABA3FF&0 : System board
ACPI\PNP0C02\1 : Motherboard resources
ACPI\PNP0C02\2 : Motherboard resources
ACPI\PNP0C02\4 : Motherboard resources
ACPI\PNP0C04\4&2D88FB92&0 : Numeric data processor
ACPI\PNP0C0C\2&DABA3FF&0 : ACPI Power Button
ACPI_HAL\PNP0C08\0 : Microsoft ACPI-Compliant System
ROOT\ACPI_HAL\0000 : ACPI Multiprocessor PC
22 matching device(s) found.
============
HDA Audio
============
HDAUDIO\FUNC_01&VEN_10EC&DEV_0662&SUBSYS_1458A002&REV_1001\4&2F790C35&0&0201: Realtek High Definition Audio
1 matching device(s) found.
============
RAID Devices
============
PCI\VEN_8086&DEV_27C0&SUBSYS_B0021458&REV_01\3&13C0B0C5&0&FA
Name: Intel(R) N10/ICH7 Family Serial ATA Storage Controller - 27C0
Hardware ID's:
PCI\VEN_8086&DEV_27C0&SUBSYS_B0021458&REV_01
PCI\VEN_8086&DEV_27C0&SUBSYS_B0021458
PCI\VEN_8086&DEV_27C0&CC_01018F
PCI\VEN_8086&DEV_27C0&CC_0101
Compatible ID's:
PCI\VEN_8086&DEV_27C0&REV_01
PCI\VEN_8086&DEV_27C0
PCI\VEN_8086&CC_01018F
PCI\VEN_8086&CC_0101
PCI\VEN_8086
PCI\CC_01018F
PCI\CC_0101
PCI\VEN_8086&DEV_27DF&SUBSYS_B0011458&REV_01\3&13C0B0C5&0&F9
Name: Intel(R) ICH7 Family Ultra ATA Storage Controllers - 27DF
Hardware ID's:
PCI\VEN_8086&DEV_27DF&SUBSYS_B0011458&REV_01
PCI\VEN_8086&DEV_27DF&SUBSYS_B0011458
PCI\VEN_8086&DEV_27DF&CC_01018A
PCI\VEN_8086&DEV_27DF&CC_0101
Compatible ID's:
PCI\VEN_8086&DEV_27DF&REV_01
PCI\VEN_8086&DEV_27DF
PCI\VEN_8086&CC_01018A
PCI\VEN_8086&CC_0101
PCI\VEN_8086
PCI\CC_01018A
PCI\CC_0101
2 matching device(s) found.53 2011-12-17 23:06:31
Re: [SLVD] Hardware radio switch is off (9 replies, posted in Hardware)
Hey TechDud, re read your post and understand it now.
Thanks for finding the info. I had come back from works Christmas Party when reading it last night and didn't realise the PCI / PCIe difference.
UPDATE !!!!
well done TechDud 
Pin 20 isolated and wireless working !!!!!
which beggars the question why can't Microsoft and Toshiba work together properly to provide the software solution
54 2011-12-17 22:44:10
Re: [SLVD] Hardware radio switch is off (9 replies, posted in Hardware)
Sorry TechDud, by playing I meant my worn out eyesight and big hands not the info. F8 does allow you to boot to safe mode so its working.
Its not per se a driver pack issue. Although after 10 hours fighting win 7 I did install Win xp with many driver packs including WLAN 1109! and HID 1109r1! I was in same position everything in device manager happy but could not switch wireless status. I did not get any toshiba extras to work. So for toshiba users maybe if this is can be resolved, it may help these users when using driver packs There seems to be many users who have the same situation I'm in..
Laptop seems in very good condition and doesn't seem to get hot and bothered. It had a fresh install of windows last weekend using a toshiba disk when I started working on it, all Fn buttons worked (sleep / brightness etc.) but F8 did nothing. When I went on Win update it updated graphics and wlan drivers, then got SP1.
As I understand it TVAP adds the function button ability. Flash cards does this as well but allows a popup to give more details of features when Fn is pressed. When nothing helped I uninstalled the Broadcom card (BCM94312HGM) and drivers and put in a brand new Intel card. Using an Intel package this gives "wireless disabled hardware radio switch is off"
On this machine F8 does not display in flash cards. I have tried 3 different TVAP versions none gave anymore functionality. Its now back running TVAP and Flash cards as reco on the page for this laptop.
The amber wireless enabled light displays for about 3 seconds till windows kicks in then it goes off. If you check / edit BIOS settings it stays on longer when you reboot maybe 10 seconds and again goes off as windows kicks in.
55 2011-12-17 09:14:47
Re: [SLVD] Hardware radio switch is off (9 replies, posted in Hardware)
Thanks for the replies,
Comes as standard with a realtek wlan card and win7 64 bit op sys. The realtek 801.n card, I presumed was stolen but now I think it just stopped working and was exchanged for the broadcom card. Now I'm trying to get (either that or) the intel one to work. Both of which have supported tosh drivers here... http://aps2.toshiba-tro.de/wlan/?page=downloads
Its a Satellite Pro L450D
official drivers here http://uk.computers.toshiba-europe.com/ … mp;search=
cdob; all drivers installed on either win 7 (win update even updated it to later whql drivers and it made no difference) or the other drive with win xp
TechDud; may well play with pin 20, but odd side of card easy to insulate as contact made as you screw the card down, evens would be trickey and likely to displace during fittment.
mr_smartepants; what do you mean with the trouble maker?
56 2011-12-16 09:13:27
Topic: [SLVD] Hardware radio switch is off (9 replies, posted in Hardware)
Hi everyone, ran out of places to try and find a solution and wonder if I can ask for help here?
I have a Toshiba Laptop that only has a software keyboard switch to enable disable the WLAN using Fn+F8 ... Nothing seems to get this to work. I even loaded win xp using all the driver packs and everything installed but WLAN still can not be turned on.
I have downloaded all the packs Toshiba recommend and followed the full instructions to the letter (TVAP and Flash Cards etc.) What really puzzels me is the Flash Cards doesn't even display the Fn+F8 icon ???
I've tried with a broadcom card and its exactly the same. I've even tried what many linux guys do by insulating pin 11 and or 13 on both the intel and broadcom cards (pin 11 stopped windows seeing the card at all and pin 13 did nothing) I think it needs a BIOS update but Toshiba have never release one. Running Win7 ultimate 64 bit.
I would think it was a hardware fault if it wasn't for the fact half the Internet seems to be Toshiba customers struggling to get wireless to switch using the Fn+F8 command.
Any advice greatly appreciated.
===========
PCI Devices
===========
PCI\VEN_1002&DEV_4396&SUBSYS_FF001179&REV_00\3&2411E6FE&1&9A: Standard Enhanced PCI to USB Host Controller
PCI\VEN_1002&DEV_9612&SUBSYS_FFB01179&REV_00\4&3238D473&0&2808: ATI Radeon HD 3200 Graphics
PCI\VEN_1022&DEV_9607&SUBSYS_FF001179&REV_00\3&2411E6FE&1&38: PCI standard PCI-to-PCI bridge
PCI\VEN_1002&DEV_4397&SUBSYS_FF001179&REV_00\3&2411E6FE&1&90: Standard OpenHCD USB Host Controller
PCI\VEN_1022&DEV_1300&SUBSYS_00000000&REV_40\3&2411E6FE&1&C0: PCI standard host CPU bridge
PCI\VEN_10EC&DEV_8136&SUBSYS_FF001179&REV_02\4&1E5D2B19&0&0038: Realtek RTL8102E/RTL8103E Family PCI-E Fast Ethernet NIC (NDIS 6.20)
PCI\VEN_1002&DEV_4397&SUBSYS_FF001179&REV_00\3&2411E6FE&1&98: Standard OpenHCD USB Host Controller
PCI\VEN_1022&DEV_1301&SUBSYS_00000000&REV_00\3&2411E6FE&1&C1: PCI standard host CPU bridge
PCI\VEN_1002&DEV_4383&SUBSYS_FF001179&REV_00\3&2411E6FE&1&A2: High Definition Audio Controller
PCI\VEN_1002&DEV_4398&SUBSYS_FF001179&REV_00\3&2411E6FE&1&91: Standard OpenHCD USB Host Controller
PCI\VEN_1022&DEV_1302&SUBSYS_00000000&REV_00\3&2411E6FE&1&C2: PCI standard host CPU bridge
PCI\VEN_1179&DEV_9602&SUBSYS_FF001179&REV_00\3&2411E6FE&1&08: PCI standard PCI-to-PCI bridge
PCI\VEN_1002&DEV_4384&SUBSYS_00000000&REV_00\3&2411E6FE&1&A4: ATI I/O Communications Processor PCI Bus Controller
PCI\VEN_1002&DEV_4398&SUBSYS_FF001179&REV_00\3&2411E6FE&1&99: Standard OpenHCD USB Host Controller
PCI\VEN_1022&DEV_1303&SUBSYS_00000000&REV_00\3&2411E6FE&1&C3: PCI standard host CPU bridge
PCI\VEN_1002&DEV_4385&SUBSYS_FF001179&REV_3A\3&2411E6FE&1&A0: ATI I/O Communications Processor SMBus Controller
PCI\VEN_1002&DEV_439C&SUBSYS_FF001179&REV_00\3&2411E6FE&1&A1: Standard Dual Channel PCI IDE Controller
PCI\VEN_1022&DEV_1304&SUBSYS_00000000&REV_00\3&2411E6FE&1&C4: PCI standard host CPU bridge
PCI\VEN_8086&DEV_4232&SUBSYS_13218086&REV_00\4&27EE3317&0&0030: Intel(R) WiFi Link 5100 AGN
PCI\VEN_1002&DEV_4391&SUBSYS_FF001179&REV_00\3&2411E6FE&1&88: Standard AHCI 1.0 Serial ATA Controller
PCI\VEN_1002&DEV_439D&SUBSYS_FF001179&REV_00\3&2411E6FE&1&A3: LPC Interface Controller
PCI\VEN_1022&DEV_9600&SUBSYS_FF001179&REV_00\3&2411E6FE&1&00: PCI standard host CPU bridge
PCI\VEN_1002&DEV_4396&SUBSYS_FF001179&REV_00\3&2411E6FE&1&92: Standard Enhanced PCI to USB Host Controller
PCI\VEN_1002&DEV_960F&SUBSYS_FFB01179&REV_00\4&3238D473&0&2908: High Definition Audio Controller
PCI\VEN_1022&DEV_9606&SUBSYS_FF001179&REV_00\3&2411E6FE&1&30: PCI standard PCI-to-PCI bridge
25 matching device(s) found.
===========
USB Devices
===========
USB\ROOT_HUB\4&144B4E5B&0 : USB Root Hub
USB\ROOT_HUB\4&29BA96CE&0 : USB Root Hub
USB\ROOT_HUB\4&30782453&0 : USB Root Hub
USB\ROOT_HUB\4&7483525&0 : USB Root Hub
USB\ROOT_HUB20\4&1D24360F&0 : USB Root Hub
USB\ROOT_HUB20\4&36058FBA&0 : USB Root Hub
USB\VID_04F2&PID_B070\SN0001 : USB Composite Device
USB\VID_04F2&PID_B070&MI_00\6&6C4765A&0&0000 : Chicony USB 2.0 Camera
8 matching device(s) found.
=============
Input Devices
=============
No matching devices found.
============
ACPI Devices
============
ACPI\PNP0C02\4&26ECF228&0 : Motherboard resources
ACPI\PNP0C04\4&26ECF228&0 : Numeric data processor
ACPI\PNP0C09\4&26ECF228&0 : Microsoft ACPI-Compliant Embedded Controller
ACPI\PNP0C0A\1 : Microsoft ACPI-Compliant Control Method Battery
ACPI\PNP0C0C\2&DABA3FF&1 : ACPI Power Button
ACPI\ACPI0003\4&26ECF228&0 : Microsoft AC Adapter
ACPI\PNP0C0D\2&DABA3FF&1 : ACPI Lid
ACPI\AUTHENTICAMD_-_AMD64_FAMILY_17_MODEL_3_-_AMD_SEMPRON(TM)_SI-42\_0: AMD Sempron(tm) SI-42
ACPI\SYN0719\4&26ECF228&0 : Synaptics PS/2 Port TouchPad
ACPI\TOS1900\2&DABA3FF&1 : TOSHIBA x64 ACPI-Compliant Value Added Logical and General Purpose Device
ROOT\ACPI_HAL\0000 : ACPI x64-based PC
ACPI\FIXEDBUTTON\2&DABA3FF&1 : ACPI Fixed Feature Button
ACPI_HAL\PNP0C08\0 : Microsoft ACPI-Compliant System
ACPI\PNP0000\4&26ECF228&0 : Programmable interrupt controller
ACPI\PNP0100\4&26ECF228&0 : System timer
ACPI\PNP0103\4&26ECF228&0 : High precision event timer
ACPI\PNP0200\4&26ECF228&0 : Direct memory access controller
ACPI\PNP0303\4&26ECF228&0 : Standard PS/2 Keyboard
ACPI\PNP0800\4&26ECF228&0 : System speaker
ACPI\PNP0A08\1 : PCI bus
ACPI\PNP0B00\4&26ECF228&0 : System CMOS/real time clock
ACPI\PNP0C01\4&26ECF228&0 : System board
ACPI\PNP0C02\3&2411E6FE&1 : Motherboard resources
23 matching device(s) found.
============
HDA Audio
============
HDAUDIO\FUNC_01&VEN_1002&DEV_791A&SUBSYS_00791A00&REV_1000\5&384AADFF&0&0001: High Definition Audio Device
HDAUDIO\FUNC_01&VEN_10EC&DEV_0272&SUBSYS_1179FFB4&REV_1000\4&2E5B7A43&0&0001: High Definition Audio Device
2 matching device(s) found.
============
RAID Devices
============
PCI\VEN_1002&DEV_439C&SUBSYS_FF001179&REV_00\3&2411E6FE&1&A1
Name: Standard Dual Channel PCI IDE Controller
Hardware ID's:
PCI\VEN_1002&DEV_439C&SUBSYS_FF001179&REV_00
PCI\VEN_1002&DEV_439C&SUBSYS_FF001179
PCI\VEN_1002&DEV_439C&CC_01018A
PCI\VEN_1002&DEV_439C&CC_0101
Compatible ID's:
PCI\VEN_1002&DEV_439C&REV_00
PCI\VEN_1002&DEV_439C
PCI\VEN_1002&CC_01018A
PCI\VEN_1002&CC_0101
PCI\VEN_1002
PCI\CC_01018A
PCI\CC_0101
PCI\VEN_1002&DEV_4391&SUBSYS_FF001179&REV_00\3&2411E6FE&1&88
Name: Standard AHCI 1.0 Serial ATA Controller
Hardware ID's:
PCI\VEN_1002&DEV_4391&SUBSYS_FF001179&REV_00
PCI\VEN_1002&DEV_4391&SUBSYS_FF001179
PCI\VEN_1002&DEV_4391&CC_010601
PCI\VEN_1002&DEV_4391&CC_0106
Compatible ID's:
PCI\VEN_1002&DEV_4391&REV_00
PCI\VEN_1002&DEV_4391
PCI\VEN_1002&CC_010601
PCI\VEN_1002&CC_0106
PCI\VEN_1002
PCI\CC_010601
PCI\CC_0106
2 matching device(s) found.
57 2011-12-10 06:10:37
Re: [SLVD] legacy ATI driver not fully installed (13 replies, posted in DriverPack Graphics)
Hi mr_smartepants, did excatly the same as both previous builds except this time as requested ONLY installed DriverPack Graphics A 9.06
Driver now correctly installed and card calls itself Radeon XT800 XT Platinum Edition ("XT Platinum Edition" part was not displayed before )
driver listed as 8.591.0.0 dated 25/02/2009 and digitally signed.
58 2011-12-09 09:11:14
Re: [SLVD] legacy ATI driver not fully installed (13 replies, posted in DriverPack Graphics)
missed what I was trying to say.... I only only had chip and mass storage in back up. Where can I get the old graphics A old to test ?
59 2011-12-09 08:40:42
Re: [SLVD] legacy ATI driver not fully installed (13 replies, posted in DriverPack Graphics)
Hi Mr_smartepants, you give amazing support and lightening response. Thank you.
Unfortunately exact same fault with Graphics C 11.11r1 and these others, in latest build.
2011-12-08 17:38:18 : <INIT> Detected DriverPack Chipset 1111!
2011-12-08 17:38:18 : <INIT> Detected DriverPack Graphics A 1107!
2011-12-08 17:38:18 : <INIT> Detected DriverPack Graphics B 1107!
2011-12-08 17:38:18 : <INIT> Detected DriverPack Graphics C 1111r1!
2011-12-08 17:38:18 : <INIT> Detected DriverPack LAN 1111!
2011-12-08 17:38:18 : <INIT> Detected DriverPack Mass Storage 1111!
2011-12-08 17:38:18 : <INIT> Detected DriverPack Sound A 1111!
2011-12-08 17:38:18 : <INIT> Detected DriverPack Sound B 1111!
2011-12-08 17:38:18 : <INIT> Detected DriverPack WLAN 1109!
2011-12-08 17:38:18 : <INIT> Detected 3rd Party DriverPack HID 1109r1!
2011-12-08 17:38:18 : <INIT> Detected 3rd Party DriverPack WebCam 1107!
2011-12-08 17:38:18 : <INIT> Finished scanning.
I guess better try the next bit.... opps no longer availble http://driverpacks.net/driverpacks/wind … ics-a/9.06 dug out an old back up only had chip and mass storage way back then...
dug out
60 2011-12-08 07:42:29
Topic: [SLVD] legacy ATI driver not fully installed (13 replies, posted in DriverPack Graphics)
Hi mr_smartepants, used all these to build a new disc incl win media centre addon. Windows installed OK but although device manager shows correct drivers installed for graphics it has tiny yellow? by Radeon x800 listing. Although could change screen res OK and had 32 bit colour switching to media centre it says unsupported graphics.
Detected DriverPack Chipset 1111!
Detected DriverPack Graphics A 1107!
Detected DriverPack Graphics B 1107!
Detected DriverPack Graphics C 1107!
Detected DriverPack LAN 1111!
Detected DriverPack Mass Storage 1111!
Detected DriverPack Sound A 1111!
Detected DriverPack Sound B 1111!
Detected DriverPack WLAN 1109!
Detected 3rd Party DriverPack HID 1109r1!
Detected 3rd Party DriverPack WebCam 1107!
Manually tried 11.11 didn't change anything, tried correct 10.2 got 2 unsigned driver nags, rebooted all now ok and media centre happy. Can't be sure BUT I thought after dp finished it showed 8593.100 now its happy shows 8.593.100 both same date of 10/02/2010
wow !!!... looked for code trying to put this in appropriate style and it wiped all my text out
===========
PCI Devices
===========
PCI\VEN_1002&DEV_4A50&SUBSYS_003A1043&REV_00\4&13EB4D69&0&0008: RADEON X800 Series
PCI\VEN_1002&DEV_4A70&SUBSYS_003B1043&REV_00\4&13EB4D69&0&0108: RADEON X800 Series Secondary
PCI\VEN_1039&DEV_0003&SUBSYS_00000000&REV_00\3&267A616A&0&08: SiS Accelerated Graphics Port
PCI\VEN_1039&DEV_0661&SUBSYS_00000000&REV_11\3&267A616A&0&00: PCI standard host CPU bridge
PCI\VEN_1039&DEV_0900&SUBSYS_09001039&REV_90\3&267A616A&0&20: SiS 900 PCI Fast Ethernet Adapter
PCI\VEN_1039&DEV_0964&SUBSYS_00000000&REV_36\3&267A616A&0&10: PCI standard ISA bridge
PCI\VEN_1039&DEV_5513&SUBSYS_55131039&REV_01\3&267A616A&0&15: SiS 5513 IDE UDMA Controller
PCI\VEN_1039&DEV_7001&SUBSYS_70011039&REV_0F\3&267A616A&0&18: SiS 7001 PCI to USB Open Host Controller
PCI\VEN_1039&DEV_7001&SUBSYS_70011039&REV_0F\3&267A616A&0&19: SiS 7001 PCI to USB Open Host Controller
PCI\VEN_1039&DEV_7001&SUBSYS_70011039&REV_0F\3&267A616A&0&1A: SiS 7001 PCI to USB Open Host Controller
PCI\VEN_1039&DEV_7002&SUBSYS_70021039&REV_00\3&267A616A&0&1B: SiS PCI to USB Enhanced Host Controller
PCI\VEN_1039&DEV_7012&SUBSYS_A1011019&REV_A0\3&267A616A&0&17: C-Media AC97 Audio Device
12 matching device(s) found.
===========
USB Devices
===========
USB\ROOT_HUB\4&2C1FE595&0 : USB Root Hub
USB\ROOT_HUB\4&2E12D58C&0 : USB Root Hub
USB\ROOT_HUB\4&531BC2A&0 : USB Root Hub
USB\ROOT_HUB20\4&1278BC77&0 : USB Root Hub
USB\VID_045E&PID_0040\5&2F03906B&0&1 : Microsoft USB Wheel Mouse Optical
USB\VID_0781&PID_5567\11013213D9E274A4 : USB Mass Storage Device
USBSTOR\DISK&VEN_SANDISK&PROD_CRUZER_BLADE&REV_8.02\11013213D9E274A4&0: SanDisk Cruzer Blade USB Device
7 matching device(s) found.
=============
Input Devices
=============
HID\VID_045E&PID_0040\6&34CE3BC5&0&0000 : Microsoft USB Wheel Mouse Optical (IntelliPoint)
1 matching device(s) found.
============
ACPI Devices
============
ACPI\FIXEDBUTTON\2&DABA3FF&0 : ACPI Fixed Feature Button
ACPI\GENUINEINTEL_-_X86_FAMILY_15_MODEL_4\_0 : Intel(R) Celeron(R) CPU 2.80GHz
ACPI\PNP0000\4&2EF2171&0 : Programmable interrupt controller
ACPI\PNP0100\4&2EF2171&0 : System timer
ACPI\PNP0200\4&2EF2171&0 : Direct memory access controller
ACPI\PNP0303\4&2EF2171&0 : PS/2 Keyboard (106 Keys Ctrl+Caps)
ACPI\PNP0401\4&2EF2171&0 : ECP Printer Port (LPT1)
ACPI\PNP0501\1 : Communications Port (COM1)
ACPI\PNP0700\4&2EF2171&0 : Standard floppy disk controller
ACPI\PNP0800\4&2EF2171&0 : System speaker
ACPI\PNP0A03\0 : PCI bus
ACPI\PNP0B00\4&2EF2171&0 : System CMOS/real time clock
ACPI\PNP0C01\1 : System board
ACPI\PNP0C02\0 : Motherboard resources
ACPI\PNP0C02\10 : Motherboard resources
ACPI\PNP0C04\4&2EF2171&0 : Numeric data processor
ACPI\PNP0C0C\AA : ACPI Power Button
ACPI\PNP0C0E\2&DABA3FF&0 : ACPI Sleep Button
ACPI_HAL\PNP0C08\0 : Microsoft ACPI-Compliant System
ROOT\ACPI_HAL\0000 : ACPI Uniprocessor PC
20 matching device(s) found.
============
HDA Audio
============
No matching devices found.
============
RAID Devices
============
PCI\VEN_1039&DEV_5513&SUBSYS_55131039&REV_01\3&267A616A&0&15
Name: SiS 5513 IDE UDMA Controller
Hardware ID's:
PCI\VEN_1039&DEV_5513&SUBSYS_55131039&REV_01
PCI\VEN_1039&DEV_5513&SUBSYS_55131039
PCI\VEN_1039&DEV_5513&CC_010180
PCI\VEN_1039&DEV_5513&CC_0101
Compatible ID's:
PCI\VEN_1039&DEV_5513&REV_01
PCI\VEN_1039&DEV_5513
PCI\VEN_1039&CC_010180
PCI\VEN_1039&CC_0101
PCI\VEN_1039
PCI\CC_010180
PCI\CC_0101
1 matching device(s) found.61 2011-11-26 03:58:49
Re: [SLVD] G\A\CX_95952.cat is a one-byte-file (11 replies, posted in DriverPack Graphics)
On the link I gave, it has release notes for 9.3 and yet the recco driver now is 10.2
Which if any of the text they provided there makes sense. 10.2 contained security / critical fixes for devices that functionally gain nothing after 9.3 which makes 10.2 the better choice.
Which if we now go back to what ska had back from AMD that matches... and 10.2 has bits u need but you can't get it with WHQL
62 2011-11-25 11:34:13
Re: [SLVD] G\A\CX_95952.cat is a one-byte-file (11 replies, posted in DriverPack Graphics)
that 9.3 driver bit rang a bell to me.... found this
AMD may periodically provide Windows XP and Windows Vista driver updates (for the products listed above) for critical fixes only. No new features will be provided in future driver updates.
All future ATI Catalyst™ releases made available past the ATI Catalyst™ 9.3 release will not include support for the legacy products listed above or any of the features associated with those legacy products.
63 2011-05-09 04:04:36
Topic: videomate TV card WHQL drivers 25 Mar 2011 (0 replies, posted in 3rd Party DriverPacks)
Hi not sure best way to post my two points,
I found some new drivers http://www.comprousa.com/en/download/tseries.html for VideoMate T Series TV Card win 7, vista and xp, WHQL drivers 25 Mar 2011
But also have a question on third party packs. How do I use them? Looked through tutorial and didn't glean any help. It appears as if any appropriate packs sit in third party folder it just adds them. But how do I know they got integrated correctly as log file appears to noticed their existence but never mentions the <SLIP>?
2011-04-23 20:41:40 : <INIT> Detected 3rd Party DriverPack TV 1005!
2011-04-23 20:47:27 : <SLIP> Copied DriverPack Mass Storage to \OEM.
2011-04-23 20:47:49 : <SLIP> Copied DriverPack WLAN to \OEM.
2011-04-23 20:47:49 : <SLIP> Copied DriverPacks to \OEM.
64 2011-01-04 10:19:05
Re: Odd error but not sure if id DP or ??? (5 replies, posted in DriverPack Graphics)
mr_smartepants wrote:
Do you also integrate the modem Third Party DriverPack? That file is in the modem pack in \D\3\M\P and \D\3\M\Z4
no never have... don't even have a modem to need it in any PC I own
65 2011-01-04 02:57:41
Re: Odd error but not sure if id DP or ??? (5 replies, posted in DriverPack Graphics)
Took advice and started again.... got myself in a muddle twice and now run out of energy to test anymore... But have added most of the other addons but left out MCE for the moment... I can report a happy marriage with all these driver packs and latest One Piece update pack
OnePiece_Windows_XP_Post-SP3_UpdatePack_v4.3.1_ENU.7z
DriverPack Chipset 1011!
DriverPack Graphics A 1011!
DriverPack Graphics B 10111!
DriverPack Graphics C 1011!
DriverPack LAN 10111!
DriverPack Mass Storage 1011!
DriverPack Sound A 1009!
DriverPack Sound B 1009!
DriverPack WLAN 1009!
only thing I found insetup log once again was
d:\xpsp\base\ntsetup\syssetup\syspnp.c,1608,,SETUP: SetupOpenInfFile() failed. FileName = mdmchipv.inf, Error = e0000100l log
but doesn't seem to be a problem....
thanks very much for all the great work u guys do.... and have a very happy new year
66 2011-01-01 22:23:42
Topic: Odd error but not sure if id DP or ??? (5 replies, posted in DriverPack Graphics)
Hi Guys, not sure where to post this.
I was trying to add media center to XP pro but used the wrong tool to integrate and it didn't work right... BUT windows loaded and the DP packs I added seemed to work with exception of the graphics card not recognised.
(by the way seems the "details links" on the individual driver pack listings to see whats in the packs is a bit??? goes back to list of packs not the details of whats in each pack).
Next time I added graphics C as well and now this is installed OK BUT although sound is recognised as cmedia device its now no longer loading driver. I had other errors and it was suggested an inf was causing the issue.... tried to look where suggested but couldn't understand what they said... but did find this error in install log
12/30/2010 18:50:22.984,d:\xpsp\base\ntsetup\syssetup\syspnp.c,1608,,SETUP: SetupOpenInfFile() failed. FileName = mdmchipv.inf, Error = e0000100l log
when I did a quick search this might be a modem driver (but I don't have one installed). So was it an addon that broke stuff or is there a minor gremlin using all the DP I did ?
sorry can't find where/how to shrink the text in sections.....
HWIDS
===========
PCI Devices
===========
PCI\VEN_1039&DEV_0003&SUBSYS_00000000&REV_00\3&267A616A&0&08: SiS Accelerated Graphics Port
PCI\VEN_1039&DEV_0661&SUBSYS_00000000&REV_11\3&267A616A&0&00: PCI standard host CPU bridge
PCI\VEN_1039&DEV_0900&SUBSYS_09001039&REV_90\3&267A616A&0&20: SiS 900 PCI Fast Ethernet Adapter
PCI\VEN_1039&DEV_0964&SUBSYS_00000000&REV_36\3&267A616A&0&10: PCI standard ISA bridge
PCI\VEN_1039&DEV_5513&SUBSYS_55131039&REV_01\3&267A616A&0&15: SiS 5513 IDE UDMA Controller
PCI\VEN_1039&DEV_6330&SUBSYS_00000000&REV_00\4&13EB4D69&0&0008: SiS Mirage Graphics
PCI\VEN_1039&DEV_7001&SUBSYS_70011039&REV_0F\3&267A616A&0&18: SiS 7001 PCI to USB Open Host Controller
PCI\VEN_1039&DEV_7001&SUBSYS_70011039&REV_0F\3&267A616A&0&19: SiS 7001 PCI to USB Open Host Controller
PCI\VEN_1039&DEV_7001&SUBSYS_70011039&REV_0F\3&267A616A&0&1A: SiS 7001 PCI to USB Open Host Controller
PCI\VEN_1039&DEV_7002&SUBSYS_70021039&REV_00\3&267A616A&0&1B: SiS PCI to USB Enhanced Host Controller
PCI\VEN_1039&DEV_7012&SUBSYS_A1011019&REV_A0\3&267A616A&0&17: C-Media AC97 Audio Device
11 matching device(s) found.
===========
USB Devices
===========
USB\ROOT_HUB\4&2C1FE595&0 : USB Root Hub
USB\ROOT_HUB\4&2E12D58C&0 : USB Root Hub
USB\ROOT_HUB\4&531BC2A&0 : USB Root Hub
USB\ROOT_HUB20\4&1278BC77&0 : USB Root Hub
4 matching device(s) found.
=============
Input Devices
=============
No matching devices found.
============
ACPI Devices
============
ACPI\FIXEDBUTTON\2&DABA3FF&0 : ACPI Fixed Feature Button
ACPI\GENUINEINTEL_-_X86_FAMILY_15_MODEL_4\_0 : Intel(R) Celeron(R) CPU 2.80GHz
ACPI\PNP0000\4&2EF2171&0 : Programmable interrupt controller
ACPI\PNP0100\4&2EF2171&0 : System timer
ACPI\PNP0200\4&2EF2171&0 : Direct memory access controller
ACPI\PNP0303\4&2EF2171&0 : Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
ACPI\PNP0401\4&2EF2171&0 : ECP Printer Port (LPT1)
ACPI\PNP0501\1 : Communications Port (COM1)
ACPI\PNP0700\4&2EF2171&0 : Standard floppy disk controller
ACPI\PNP0800\4&2EF2171&0 : System speaker
ACPI\PNP0A03\0 : PCI bus
ACPI\PNP0B00\4&2EF2171&0 : System CMOS/real time clock
ACPI\PNP0C01\1 : System board
ACPI\PNP0C02\0 : Motherboard resources
ACPI\PNP0C02\10 : Motherboard resources
ACPI\PNP0C04\4&2EF2171&0 : Numeric data processor
ACPI\PNP0C0C\AA : ACPI Power Button
ACPI\PNP0C0E\2&DABA3FF&0 : ACPI Sleep Button
ACPI\PNP0F03\4&2EF2171&0 : Microsoft PS/2 Mouse
ACPI_HAL\PNP0C08\0 : Microsoft ACPI-Compliant System
ROOT\ACPI_HAL\0000 : ACPI Uniprocessor PC
21 matching device(s) found.
============
HDA Audio
============
No matching devices found.
============
RAID Devices
============
PCI\VEN_1039&DEV_5513&SUBSYS_55131039&REV_01\3&267A616A&0&15
Name: SiS 5513 IDE UDMA Controller
Hardware ID's:
PCI\VEN_1039&DEV_5513&SUBSYS_55131039&REV_01
PCI\VEN_1039&DEV_5513&SUBSYS_55131039
PCI\VEN_1039&DEV_5513&CC_010180
PCI\VEN_1039&DEV_5513&CC_0101
Compatible ID's:
PCI\VEN_1039&DEV_5513&REV_01
PCI\VEN_1039&DEV_5513
PCI\VEN_1039&CC_010180
PCI\VEN_1039&CC_0101
PCI\VEN_1039
PCI\CC_010180
PCI\CC_0101
1 matching device(s) found.what I did and how....
using a clean win XP sp3 source
I added separately using RVMIntegrator v1.6.1 beta2.1 each of these
Extracting OnePiece_Windows_XP_Post-SP3_UpdatePack_v4.3.1_ENU.7z
then
Extracting OnePiece_Remove_BrowserChoice_AddOn.cab
then
Extracting OnePiece_Remove_Microsoft_Update_AddOn.cab
then
Extracting OnePiece_Remove_Windows_Search_AddOn.cab
using nlite 1.491 added
Ricks_XP_to_MCE05_enOCT09.7z (I may have renamed it and some others below but I used last version available)
back to using RVMIntegrator v1.6.1 beta2.1 then added all these in one go each of these
Extracting YumeYao_MicrosoftVC789RuntimeLibraries_MixedAddon_2_0_1.7z
Extracting Addon_AdobeReader_1000.7z
Extracting Addon_Foxy_DVDShrink_3.2.0.15_v1.1.cab
Extracting Addon_ImageResizer-Powertoy-v1.2_OrcoXP.cab
Extracting Addon_WinRAR 3.93.0.0 Final-(x86)-English.cab
Extracting Addon_xable_HashTab-x32-v3.0.cab
Extracting defraggler200230_ELiTE_Addon.7z
Copying Java6u23.exe
Extracting Kels_CPLBonus_v11.6_addon.rar
Extracting Ricks_CCleaner3.02.1343_Intl_addon.7z
Copying SFX_Qt-lite_4.1.0.exe
Extracting TbarShuffle25_ELiTE_Addon.7z
nlite to add key and remove media player sample music and tour
then driver packs
Detected DriverPack Chipset 1011!
Detected DriverPack Graphics A 1011!
Detected DriverPack Graphics B 10111!
Detected DriverPack Graphics C 1011!
Detected DriverPack LAN 10111!
Detected DriverPack Mass Storage 1011!
Detected DriverPack Sound A 1009!
Detected DriverPack Sound B 1009!
Detected DriverPack WLAN 1009!
On install of windows....no hang up or error messages
drivers packs all working
media centre working
taskbar shuffle working
adobe 10 working
qlite working
java shows up
defraggler working
BUT MISSING
No start menu option for IE
No quick launch or desktop icon for IE (works if u add it)
No quick launch show desktop (works if u add it)
NO control panel extras completely missing (Kels_CPLBonus_v11.6)
NO right click image resizer option (ImageResizer-Powertoy-v1.2_OrcoXP.cab)
NO hashtab
NO ccleaner
NO WinRAR
NO dvd shrink
I have used everything before and always worked on versions where I did not have media centre addon BUT that was before I used the latest OnePiece pack with all dot net built in.
The day before I did the same but used Rvmi to add media centre because Rick's instruction not to use it are on page 4 or somewhere, this failed to install media centre but windows loaded OK and hastab I think was there and working, pretty sure dvd shrink was there but isn't now and ccleaner was definitely missing in both.
67 2009-11-17 06:21:06
Re: [IMPL] Atheros AR5B91 WLAN (12 replies, posted in DriverPack WLAN)
[quote Driverpacks.net does only support drivers from original OEM's websites. quote]
trouble is they don't seem to make anything available, on this one got hold of a recent win xp whlq driver for a AR5005gs 7.7.0.329 (June 2009)
68 2008-11-18 09:00:19
Topic: [IMPL] VIA Hyperion 5.21a (1 replies, posted in DriverPack Mass Storage)
Hi Guys, new to your site. I noticed the Via chipset drivers have had a few updates since 8.05 Not sure if this is the right place to mention it?
http://www.viaarena.com/default.aspx?Pa … CatID=1070
version 5.21A
INF Driver V3.00A
AGP Driver V4.60A
VIA Falcon IDE Storage Device Driver Package V2.60A
VIA V-RAID Driver V5.80C, RAID Tools V5.81
on pack 8.05 I think its 5.17a ?
INF Driver V3.00A
AGP Driver V4.60A
VIA Falcon IDE Storage Device Driver Package V2.50A
VIA V-RAID Driver V5.70A , RAID Tools V5.50