Topic: [REQ] Intel USB 3.0 - Windows 7 x64 - HP ProDesk 600

Hello,

Thanks for such a great site, tools and forum.

I've a problem with one of the DriverPacks. I've been trying to sort this since few days and just can't and I really need a help, please.

I have few workstations HP ProDesk 600. I've tried beta DriverPack Chipset for Win7 x64 and got 4 devices not installed.
PunBB bbcode test
1) PCI Serial Port
PCI\VEN_8086&DEV_8C3D&SUBSYS_18E7103C&REV_04
2) PCI Simple Communications Controller
PCI\VEN_8086&DEV_8C3A&SUBSYS_18E7103C&REV_04
3) SM Bus Controller
PCI\VEN_8086&DEV_8C22&SUBSYS_18E7103C&REV_04
4) Universal Serial Bus (USB) Controller
PCI\VEN_8086&DEV_8C31&SUBSYS_18E7103C&REV_04

I've updated beta DriverPack for chipset with new drivers (I really tried to do this correctly) and it kind of worked but I still got one problem. I've noticed that when I install drivers for "Universal Serial Bus (USB) Controller" new device appears called Intel USB3.0 Root Hub and doesn't get installed.
IUSB3\ROOT_HUB30&VID_8086&PID_8C31&REV_0004&SID_18E7103C
PunBB bbcode test
I've checked DPINST.log and found this:
  Preinstalling 'c:\d\x64\all\c\usb\intel\4\iusb3hub.inf' ...
  INFO:   ENTER:  DriverPackagePreinstallW
  INFO:   Looking for Model Section [Intel.NTAMD64.6.1]...
  INFO:   No matching devices found in INF "c:\d\x64\all\c\usb\intel\4\iusb3hub.inf" on the Machine.
  INFO:   RETURN: DriverPackagePreinstallW  (0xE000020B)

If I now manually try to update driver for this device, pointing to the same folder where I have drivers for "SM Bus Controller", device gets installed and all is fine. Alternatively I can just run installation of that DriverPack again and again that device will get installed just fine.
My updated DriverPack for Chipset.

I would appreciate any help.

Kind Regards,
|Kazan|

Last edited by kazan (2014-03-20 21:07:09)

Re: [REQ] Intel USB 3.0 - Windows 7 x64 - HP ProDesk 600

Hello & Welcome to the Forum, kazan!

Curious; what is the HWID for the Intel(R) USB 3.0 Root Hub?

Noting that you may want to start a new topic to advertise your updated Chipset pack(s).

Re: [REQ] Intel USB 3.0 - Windows 7 x64 - HP ProDesk 600

Hi

Sorry, not sure how I could forget about this.

HWID for the Intel(R) USB 3.0 Root Hub:
IUSB3\ROOT_HUB30&VID_8086&PID_8C31&REV_0004&SID_18E7103C

Kind regards,
|Kazan|

Edit: so my current and temp solution to my problem is doubling the line
Start "MicroSoft Driver Installer Tool Running" /wait /separate /realtime /min CMD /C DPInst.exe /c /s
in DP_Install_Tool.cmd. Not perfect but works for me. If anyone would have better solution I would really appreciate it.

Last edited by kazan (2014-03-25 00:31:13)

Re: [REQ] Intel USB 3.0 - Windows 7 x64 - HP ProDesk 600

Have the same problem, with the usb 3.0 ingetrated intel driver i get the same message. When i choose the driver manually i get the information that it isnt signed. When i switch the driver with the official Intel Driver https://downloadcenter.intel.com/Detail … ldID=19880 it will be installed fine.

Re: [REQ] Intel USB 3.0 - Windows 7 x64 - HP ProDesk 600

this was explained to you in the other thread.

it's a nested driver issue.  you can't install a secondary driver if the primary driver is not installed.

you can't install USB driver if Chipset driver is not installed first.
you can't install an agp video card driver if the AGP driver is not installed first.

Nested drivers will require a second pass and possibly a reboot and a second pass.
If chipset drivers are slip-streamed into your source this is rare.

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

Re: [REQ] Intel USB 3.0 - Windows 7 x64 - HP ProDesk 600

Hi Overflow,
thanks for response and information smile

Got the tipp to use SDI (Simple Driver Installer) from BadPointer.
With this Software it is also possible to install all drivers in one installation routine.

Re: [REQ] Intel USB 3.0 - Windows 7 x64 - HP ProDesk 600

Let us know in that thread and here how that works, he just posted it here and we are not familiar with it yet.

If it can force the install in one pass that is very cool, I think i would still reboot after though tongue.

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

Re: [REQ] Intel USB 3.0 - Windows 7 x64 - HP ProDesk 600

Hi,

i think its easier when you see this Post of BadPointer:
http://forum.driverpacks.net/viewtopic. … 579#p57579

SDI is really easy, only Download it copy all Drivers into the Drivers folder and start it. Thats it wink
You can put Packages or Single extraceted Drivers into the folder.
No Problem.
The only thing he said you should use this USB 3.0 driver pack http://www.mediafire.com/download/actdb … tel_FIX.7z
Because this is checking what Generation the USB 3.0 Intel Modul is.