You are not logged in. Please login or register.
The command to output 3rd party drivers for a mounted image is:
DISM /image:"%mountdirectory%" /Get-Drivers /Format:Table (or 'List' for a different layout)
More info: http://technet.microsoft.com/en-us/libr … s.10).aspx
Dism /image:C:\test\offline /Get-Drivers
http://driverpacks.net/docs/miscellaneo … er-attempt
Index one ... don't touch (think safe mode)
index two ... Install (PE) Add mass only. no chipset.
LAN only if Neccessary. If you have no network access you can't get a virus or trojan 
.
In this way you can install malware protection before you enable your LAN.
Obviously if you are on a protected network this is a non issue.
Ok thanks for the heads up for the information about dism and the index info on boot.wim file 
I will try to upload my DriverPack MassStorage x86 now somewhere...
I`ve found some strange thing with DP_MassStorage_wnt6-x86_1208. Windows 7 x86 does not find any disks with all the drivers integrated to boot.wim and install.wim, but when i downloaded Intel RAID Driver 11.1.0.1006 (it is here http://depositfiles.com/files/9mi0yporm) everything worked as a charm. May be the problem is out of date drivers version in 1208?
Tested on Toshiba Sattelite U840 Series. ASUS UX31A works great! Very strange...
Please post the HWIDs of the PC with the problems.
PCI\VEN_8086&DEV_282A&SUBSYS_FBA11179&REV_04Powered by PunBB, supported by Informer Technologies, Inc.
Currently installed 3 official extensions. Copyright © 2003–2009 PunBB.
[ Generated in 0.015 seconds, 10 queries executed ]