• rdn2fst
  • DriverPacks newbie
  • Offline
  • Registered: 2012-08-11
  • Posts: 2

Topic: [Help] Netlink 57XX drivers in PE

I've been reading this post http://forum.driverpacks.net/viewtopic.php?id=4136 to attempt doing this on my own but im not sure i'm doing it right.

I have an odd task at hand which is to P2V a custom Windows Embedded Standard 2009 setup.  The machine is an HP t5740e and i beleive it has a Broadcom Netlilnk 57XX NIC.  I've downloaded XP drivers from here http://www.broadcom.com/support/etherne … p?legacy=1 and have unpacked them to C:\MOA\pebuilder\drivers\Net

what would i need to do after that?

  • From: Cambridgeshire, UK
  • Registered: 2007-01-27
  • Posts: 6,226

Re: [Help] Netlink 57XX drivers in PE

I'm not familiar with that embedded OS.  Is it XP-based or Vista/Win7-based?
How you integrate the drivers into the OS depends on how you plan on packaging it onto your recovery .iso.

Read BEFORE you post.  HWID tool   DriverPacks Tutorial   DONATE!
http://driverpacks.net/userbar/admin-1.png
Not all heroes wear capes, some wear Kevlar!
  • rdn2fst
  • DriverPacks newbie
  • Offline
  • Registered: 2012-08-11
  • Posts: 2

Re: [Help] Netlink 57XX drivers in PE

WES 2009 is basically XP.  What I'm building is the MOA iso (bartpe) in order to run VMware converter from a WinPE environment.

MOA = http://sanbarrow.com/moa241.html#bootimage

Last edited by rdn2fst (2012-08-11 05:35:17)

  • From: Cambridgeshire, UK
  • Registered: 2007-01-27
  • Posts: 6,226

Re: [Help] Netlink 57XX drivers in PE

...moved topic to PE section...
Once you have the drivers in the \net\ folder of your PEbuilder, you should just run their utility to build the custom .inf.
I'm not familiar with MOA so I can't help you with that.

Read BEFORE you post.  HWID tool   DriverPacks Tutorial   DONATE!
http://driverpacks.net/userbar/admin-1.png
Not all heroes wear capes, some wear Kevlar!