Topic: [SLVD] Dell SAS 6 RAID issue
Hi All,
I recently downloaded and imported the latest version of the Mass Storage driver packs for the UBCD4WIN as it wouldn't boot up (BSOD) on the Dell PowerEdge T105 and T110 model servers.
Now that the drivers are there, it no longer blue screens, but I now have another issue.
You see, everything works great on the T105. I can see the RAID drive when booting from the UBCD4WIN CD, and Ghost works wonderfully with it.
But this is not the same with the T110. The T110 will boot, but it still will not show any drives.
Both model servers we get in use the Dell SAS 6 model SATA/SAS RAID Card, which is based on the LSI chipset.
The ONLY difference I can find between the 2 cards is the BIOS and firmware versions;
T105 - Dell SAS6 Firmware 29/09/2007, BIOS v6.14.10.00
T110 - Dell SAS6 Firmware 06/08/2008, BIOS v6.22.03.00
So, my question is should I get the latest Dell driver for the SAS6 on the T110? If not what could be the issue, and if so how do I integrate it in to the CD - I've seen some posts on how to do it but find them a little confusing.
Thanks!