You are not logged in. Please login or register.
Hi, I've built a UBCD4Win CD and have found that a driver update is needed to support Intel SATA controllers. I've had to download and add a specific driver for both my desktop and laptop machines. Is it possible to have this included in the next release of driverpacks,net?
Intel Rapid Storage 5 Series 6 Port SATA AHCI Controller.
Win XP Driver Version 9.6.0.1014
Applicable to Dell Vostro Notebook - 3400, 3300, 3500, 3700 (and desktops)
Dell driver: R271949
Try current DriverPacks first.
Backup folder plugin\DriverPacks.net, delete folder plugin\DriverPacks.net
Follow section "All versions of BartPE"
http://users.telenet.be/jtdoom/basetute … lpFile.htm
Thanks for the help. I have driver packs base installed. I'm told everything is up to date when I run it. I downloaded the mass storage pack and tried to slip stream it. It is recognized in the base app and also show's up to date. When I slip stream it does not create a mass storage folder in plugin\DriverPacks.Net. The plugin\driverpacks.net only has the BASE folder in it. Any ideas?
Also, is there a way I can get all the latest driver packs in one download?
Is it possible to have this included in the next release of driverpacks,net?
Intel Rapid Storage 5 Series 6 Port SATA AHCI Controller.
Win XP Driver Version 9.6.0.1014
That version is in the current release, but it has been removed in the current testing builds because RST 10.1 and 10.5 replace it completely.
Also, is there a way I can get all the latest driver packs in one download?
The link to our entire torrent archive is at the bottom of the "Donate" page: http://driverpacks.net/donate
Make sure the DriverPacks you want integrated in your UBCD4win are copied to the following location: %\UBCD4Win\plugin\DriverPacks.net\BASE\DriverPacks
did you follow the directions cdob linked to? (also in my signature)
lets see your DPs_BASE.log?
Yes,I followed the instructions. BASE is installed, works and see the mass storage pack. Slip stream deletes the old folder if there and I agree. In all cases it does not create a new folder. Here's the log:
Thanks for the help...ed
2011-05-22 08:39:09 : <INIT> DriverPacks BASE 10.06 initialized.
2011-05-22 08:39:09 : <INIT> Host environment: WIN_7 Service Pack 1 X64 on a X64 CPU.
2011-05-22 08:39:09 : <INIT> Created temporary working directory.
2011-05-22 08:39:09 : <INIT> Imported proxy settings from Internet Explorer.
2011-05-22 08:39:09 : <INIT> Start scanning for DriverPacks for the wnt5_x86-32 platform.
2011-05-22 08:39:09 : <INIT> Detected DriverPack Mass Storage 1104!
2011-05-22 08:39:09 : <INIT> Could not detect any 3rd party DriverPacks for wnt5_x86-32.
2011-05-22 08:39:09 : <INIT> Finished scanning.
2011-05-22 08:39:09 : <INIT> Detected settings file "C:\Dev\UBCD4Win\UBCD4Win\plugin\DriverPacks.net\BASE\DPs_BASE.ini".
2011-05-22 08:39:09 : <INIT> wnt5_x86-32_bartpe is the selected installation platform .
2011-05-22 08:39:09 : <INIT> Imported settings from settings file.
2011-05-22 08:39:09 : <INIT> [OptionalSettings]\QSC BartPE default (no) was set.
2011-05-22 08:39:09 : <GUI> Initialized GUI.
2011-05-22 08:39:09 : <GUI> Created a list of all available language files.
2011-05-22 08:39:09 : <GUI> Set the last used language, English, as the GUI language.
2011-05-22 08:39:12 : <GUI> Saved settings!
2011-05-22 08:39:12 : <GUI> Closed GUI.
2011-05-22 08:39:12 : <SEL> Selected module: mod_slip_wnt5_x86-32_bartpe.
2011-05-22 08:39:14 : <PREP> Existing LAN won't be changed.
2011-05-22 08:39:16 : <PREP> C:\Dev\UBCD4Win\UBCD4Win\plugin\DriverPacks.net\MassStorage was deleted.
2011-05-22 08:39:20 : <PREP> Existing WLAN won't be changed.
2011-05-22 08:39:20 : <PLUGIN> Slipstream finished in 8 seconds.
2011-05-22 08:39:22 : <CLNP> Temporary working directory successfully deleted.
- = DriverPacks BASE ini settings used = -
[General]
; preferred language
prefLang = "English"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons = "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI = "yes"
[Settings]
; disc/bartpe/multibootDisc
instPlatform = "bartpe"
; trailing backslash is allowed, but not necessary
location = "C:\Dev\UBCD4Win\UBCD4Win\plugin"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks = "none"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod = ""
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod = ""
; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD = ""
; <path>, to specify a custom KTD cache location, if not specified: default (%SystemRoot%\DriverPacks)
KTDlocation = ""
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC = "no"
2011-05-22 08:39:22 : <CLNP> Create a DPs_Base.log backup @ C:\Dev\UBCD4Win\UBCD4Win\plugin\DriverPacks.net\BASE\LogFiles\DPs_BASE_11-05-22_08-39-22.log
2011-05-22 08:39:22 : <CLNP> Program terminated.Odd. Do you have dpms textmode enabled?
Can you post your DPs_BASE.ini?
Not sure about textmode. I didn't make any setting changes.
[General]
; preferred language
prefLang = "English"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons = "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI = "yes"
[Settings]
; disc/bartpe/multibootDisc
instPlatform = "bartpe"
; trailing backslash is allowed, but not necessary
location = "C:\Dev\UBCD4Win\UBCD4Win\plugin"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks = "none"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod = "2"
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod = "GUIRunOnce"
; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD = "false"
; <path>, to specify a custom KTD cache location, if not specified: default (%SystemRoot%\DriverPacks)
KTDlocation = "%SystemRoot%\DriverPacks"
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC = "no"Here's your problem right here:
; none/all/select, if select, specify them below, if not specified: all
DriverPacks = "none"Your DPs_BASE.ini has other issues (KTD) as well.
Here's mine as a reference. Mine works perfectly.
[General]
; preferred language
prefLang = "English"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons = "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI = "yes"
[Settings]
; disc/bartpe/multibootDisc
instPlatform = "bartpe"
; trailing backslash is allowed, but not necessary
location = "C:\Tools\XP\UBCD4Win\plugin"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks = "select"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod = ""
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod = ""
; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD = ""
; <path>, to specify a custom KTD cache location, if not specified: default (%SystemRoot%\DriverPacks)
KTDlocation = ""
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC = "no"
; you should only add this section if you've set [Settings]\DriverPacks to "select"
[SelectDriverPacks]
DP_LAN = "yes"
DP_MassStorage = "no"
DP_WLAN = "yes"
DP_MassStorage_textmode = "yes"OK. It looks like that worked. I must have missed the instructions to modify the ini file. So when I add LAN or WLAN packs I should select the entry in [SelectDriverPacks] to no?
Here's my log file:
2011-05-23 07:35:36 : <INIT> DriverPacks BASE 10.06 initialized.
2011-05-23 07:35:36 : <INIT> Host environment: WIN_7 Service Pack 1 X64 on a X64 CPU.
2011-05-23 07:35:36 : <INIT> Created temporary working directory.
2011-05-23 07:35:36 : <INIT> Imported proxy settings from Internet Explorer.
2011-05-23 07:35:36 : <INIT> Start scanning for DriverPacks for the wnt5_x86-32 platform.
2011-05-23 07:35:36 : <INIT> Detected DriverPack Mass Storage 1104!
2011-05-23 07:35:36 : <INIT> Could not detect any 3rd party DriverPacks for wnt5_x86-32.
2011-05-23 07:35:36 : <INIT> Finished scanning.
2011-05-23 07:35:36 : <INIT> Detected settings file "C:\Dev\UBCD4Win\UBCD4Win\plugin\DriverPacks.net\BASE\DPs_BASE.ini".
2011-05-23 07:35:36 : <INIT> wnt5_x86-32_bartpe is the selected installation platform .
2011-05-23 07:35:36 : <INIT> Imported settings from settings file.
2011-05-23 07:35:36 : <INIT> [OptionalSettings]\QSC BartPE default (no) was set.
2011-05-23 07:35:36 : <GUI> Initialized GUI.
2011-05-23 07:35:36 : <GUI> Created a list of all available language files.
2011-05-23 07:35:36 : <GUI> Set the last used language, English, as the GUI language.
2011-05-23 07:35:39 : <GUI> Refreshed UpdateChecker with success.
2011-05-23 07:35:50 : <GUI> Saved settings!
2011-05-23 07:35:50 : <GUI> Closed GUI.
2011-05-23 07:35:50 : <SEL> Selected module: mod_slip_wnt5_x86-32_bartpe.
2011-05-23 07:35:56 : <PREP> Existing LAN won't be changed.
2011-05-23 07:36:18 : <PREP> C:\Dev\UBCD4Win\UBCD4Win\plugin\DriverPacks.net\MassStorage was deleted.
2011-05-23 07:36:18 : <PREP> C:\Dev\UBCD4Win\UBCD4Win\plugin\DriverPacks.net\MassStorage\MassStorage.inf header info written.
2011-05-23 07:36:21 : <SLIP> Extracted DriverPack MassStorage to a temporary working directory.
2011-05-23 07:36:21 : <SLIP> C:\Dev\UBCD4Win\UBCD4Win\plugin\DriverPacks.net\BASE\tmp\DPMtmp\DriverPack_MassStorage_wnt5_x86-32.ini
2011-05-23 07:36:21 : <SLIP> Processing Mass Storage files now. This may take a minute.
2011-05-23 07:36:41 : <SLIP> Copied DriverPack MassStorage text mode driver files to BartPE Plugin folder.
2011-05-23 07:36:41 : <SLIP> Slipstreamed DriverPack MassStorage text mode driver files.
2011-05-23 07:36:43 : <SLIP> Updated the MassStorage.ini [SetValue] sections to support DP MassStorage text mode drivers.
2011-05-23 07:36:55 : <SLIP> Existing WLAN won't be changed.
2011-05-23 07:36:55 : <PLUGIN> Saved settings!
2011-05-23 07:36:55 : <PLUGIN> Slipstream finished in 1 minutes and 5 seconds.
2011-05-23 07:37:00 : <CLNP> Temporary working directory successfully deleted.
- = DriverPacks BASE ini settings used = -
[General]
; preferred language
prefLang = "English"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons = "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI = "yes"
[Settings]
; disc/bartpe/multibootDisc
instPlatform = "bartpe"
; trailing backslash is allowed, but not necessary
location = "C:\Dev\UBCD4Win\UBCD4Win\plugin"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks = "select"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod = ""
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod = ""
; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD = ""
; <path>, to specify a custom KTD cache location, if not specified: default (%SystemRoot%\DriverPacks)
KTDlocation = ""
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC = "no"
; you should only add this section if you've set [Settings]\DriverPacks to "select"
[SelectDriverPacks]
DP_MassStorage = "no"
DP_MassStorage_textmode = "yes"
2011-05-23 07:37:00 : <CLNP> Create a DPs_Base.log backup @ C:\Dev\UBCD4Win\UBCD4Win\plugin\DriverPacks.net\BASE\LogFiles\DPs_BASE_11-05-23_07-37.log
2011-05-23 07:37:00 : <CLNP> Program terminated.OK, good news. The new MassStorage pack worked. UBCD had V9. I no longer need the Dell SATA drivers. Thanks.
So when I add LAN or WLAN packs I should select the entry in [SelectDriverPacks] to no?
No, if you want the pack selected, you pick "yes". The reason dpms is set to "no" by default is because in PE the drivers aren't getting installed. Only the txtmode is used. The network module uses the LAN.inf and WLAN.inf to start the network once booted into PE. dpms doesn't work like that, nor is it needed.
Got it. Thanks again for the help. I have it working now...ed
you don't have to modify anything manually... You simply did not select mass storage text mode from the GUI...
PLEASE LOOK AT / REFERENCE FIGURE 2 IN THE TUTORIAL 
Since you did not select "mass storage text mode" you effectively told DriverPacks BASE to remove mass storage, and it did. GIGO (garbage in garbage out)
PS YOU ALSO FAILED THE VERY FIRST LINE OF THE INSTRUCTIONS
"Extract / install the DriverPacks Base program to a folder that IS NOT in your plugin folder - IE C:\DPsBase\"
from your log:
2011-05-23 07:37:00 : <CLNP> Create a DPs_Base.log backup @ C:\Dev\UBCD4Win\UBCD4Win\plugin\DriverPacks.net\BASE...
Clearly IN the plugin folder, contrary to the tutorial.
PSS Alternately you could have configured (added) Mass storage from PeBuilder plugins page as described in the lower part of the tutorial. The part that follows the line:
" Run UBCD4WINBUILDER.EXE or PEBuilder.exe and open the "plugins" page. "
AKA How to properly run BASE as a plugin ~ that is to say when you want to run BASE from within in the plugin folder structure
NOTE: It's better to do a "clean install" by installing DriverPacks BASE in a a folder that IS NOT in UBCD4Win and allowing BASE to completely remove the plugin and create a new one .
Alternately you could have configured (added) Mass storage from PeBuilder plugins page as described in the lower part of the tutorial.
There is no Base included in UBCD4Win currently. Back then there was a update in advance and old Base was not included.
Hence you have to download current Base first.
Thanks cdob,
Good to know.
Always nice to see you and the other members of the UBCD4Win Team!
cdob, I did install it outside the plugiun folder. I posted a working log file not the original. The base install of the app failed with the error dialog "there are not yet any slipstream modules available for the selected platform". Once I got it to run it created a BASE folder in the plugin folder and I used that install to try and unpack. That's how it ended up in the log as you pointed out. Its not that I installed it there.
When I ran DriverPack config from the plugin folder it deleted all the driver pack folders and didn't recreate them so I stopped using that. As it turns out a proper configuration would have worked but until I had that I didn't trust the plugin config route.
The mass storage driver pack is in the Driver Packs folder and it shows up as "up to date" on the pack select screen. Without manually modifying the ini file there wasn't any text mode option to select. Believe me, I wanted to select text mode but couldn't.
So you can clearly see that I followed your instructions and tried to make this work as planed. The mistake I made was to not to browse for the PE install location. I missed the "On the location page (see fig1) Select BartPE and "Browse" to your Plugin folder. " step and that caused all kinds of havoc.
I hope this clears things up.
Last edited by zappullae (2011-05-25 01:39:38)
Powered by PunBB, supported by Informer Technologies, Inc.
Currently installed 3 official extensions. Copyright © 2003–2009 PunBB.
[ Generated in 0.019 seconds, 10 queries executed ]