Topic: [IMPL] Dawicontrol Drivers
Please add this Drivers
i have an DC-3410 RAID Controller to test...
http://www.dawicontrol.com/index.php?cmd=raid
Last edited by predator2003 (2011-05-21 20:20:31)
You are not logged in. Please login or register.
Please add this Drivers
i have an DC-3410 RAID Controller to test...
http://www.dawicontrol.com/index.php?cmd=raid
Last edited by predator2003 (2011-05-21 20:20:31)
How about I add all of them?
sounds great
Implemented for 11.05.1 (future release)
I thought it may be interesting to note the actual controller chips, which could indicate possible generic driver (not BIOS! - risk of 'brick') updates for Dawicontrol RAID controllers. Serendipity occurred, instead. Silicon Image, for example, has no drivers newer than 2010. The Dawicontrol drivers & BIOS are from 2011. Note that this is only theoretical, and yet to be tested.
Dawicontrol Product RAID Chipset Dawicontrol RAID Driver Version
--------------------------------------------------------------------------------------------
DC-2975U Symbios 53C875E n/a
DC-100 HighPoint HPT370A XP v2.351 Win7 n/a
DC-133 SiliconImage SiI680A XP v3.64 Win7 v3.64 *
DC-150 SiliconImage SiI3512 XP v3.64 Win7 v3.64 * ***
DC-154 SiliconImage SiI3114 XP v3.64 Win7 v3.64 * ***
DC-3410 SiliconImage SiI3124 XP v3.64 Win7 v3.64 *
DC-4300 SiliconImage SiI3124 XP v3.64 Win7 v3.64 *
DC-4320e SiliconImage SiI3124 XP v3.64 Win7 v3.64 *
DC-300e SiliconImage SiI3132 XP v3.64 Win7 v3.64 *
DC-310e SiliconImage SiI3132 XP v3.64 Win7 v3.64 *
DC-324e Marvell 88SX7042 XP v3.64 Win7 v3.64 * **
DC-600e Marvell 88SE9128 XP v3.64 Win7 v3.64 **
* note: these drivers might work with generic cards (probably BIOS dependent, though - only update BIOS if you're willing to risk 'bricking' your card!) & include the 'Virtual Processor' driver
** note: latest BIOS seems to be SiI-based???
*** note: Wikipedia notes 'Product Alerts' that may or may not have been solved long ago http://en.wikipedia.org/wiki/Silicon_Image
I will attempt to test with a generic SiI680A-based RAID card (time permitting - & time is tight for me), since the BIOS is socketed & i cannot 'brick' it. I note that the Dawicontrol BIOS is 128k in size, as is the SiI BIOS, even the PnP-ID at the EOF is the same. The key used to enter the RAID BIOS Utility is different. (F4 with Dawicontrol BIOS)
This could prove to be a nice update to my PnP-ID-modded SiI680A BIOS v3.4.00. I would assume that the original SiI DOS-based BIOS-flasher would be necessary for this update. I wonder if the RAID monitor will work, too.
If only there were 'motherboard'-based RAID BIOS' available from Dawicontrol.
Last edited by TechDud (2011-05-26 10:14:31)
no luck with a cross-flash on a generic board with SiI680A reference design. no post (1 beep)
Powered by PunBB, supported by Informer Technologies, Inc.
Currently installed 3 official extensions. Copyright © 2003–2009 PunBB.
[ Generated in 0.015 seconds, 10 queries executed ]