Topic: [IMPL] Chipset - FTDI USB2 serial drivers
New WHQL driver for win-all x86 & x64 (FTDI USB2 - serial)
DriverVer=03/18/2011,2.08.14
available here: http://www.ftdichip.com/Drivers/CDM/CDM … tified.zip
Release notes - including 1.00.xxxx versions: http://www.ftdichip.com/Drivers/CDM/CDM … 20Info.rtf
Advanced driver options: http://www.ftdichip.com/Support/Documen … 000073.pdf
I believe there may have been HWID's included in that driver missing from the current release.
From v1.00.2154
[FtdiHw]
%USB\VID_0403&PID_8372.DeviceDesc%=FtdiBus,USB\VID_0403&PID_8372
%USB\VID_0403&PID_6001.DeviceDesc%=FtdiBus,USB\VID_0403&PID_6001
%USB\VID_0403&PID_6007.DeviceDesc%=FtdiBus,USB\VID_0403&PID_6007
%USB\VID_0403&PID_6008.DeviceDesc%=FtdiBus,USB\VID_0403&PID_6008
%USB\VID_0403&PID_6009.DeviceDesc%=FtdiBus,USB\VID_0403&PID_6009
%USB\VID_0403&PID_0232.DeviceDesc%=FtdiBus,USB\VID_0403&PID_0232
From v2.08.14
[FtdiHw]
%USB\VID_0403&PID_6001.DeviceDesc%=FtdiBus.NT,USB\VID_0403&PID_6001
%USB\VID_0403&PID_6010&MI_00.DeviceDesc%=FtdiBus.NT,USB\VID_0403&PID_6010&MI_00
%USB\VID_0403&PID_6010&MI_01.DeviceDesc%=FtdiBus.NT,USB\VID_0403&PID_6010&MI_01
%USB\VID_0403&PID_6011&MI_00.DeviceDesc%=FtdiBus.NT,USB\VID_0403&PID_6011&MI_00
%USB\VID_0403&PID_6011&MI_01.DeviceDesc%=FtdiBus.NT,USB\VID_0403&PID_6011&MI_01
%USB\VID_0403&PID_6011&MI_02.DeviceDesc%=FtdiBus.NT,USB\VID_0403&PID_6011&MI_02
%USB\VID_0403&PID_6011&MI_03.DeviceDesc%=FtdiBus.NT,USB\VID_0403&PID_6011&MI_03
%USB\VID_0403&PID_6014.DeviceDesc%=FtdiBus.NT,USB\VID_0403&PID_6014[FtdiHw.NTamd64]
%USB\VID_0403&PID_6001.DeviceDesc%=FtdiBus.NTamd64,USB\VID_0403&PID_6001
%USB\VID_0403&PID_6010&MI_00.DeviceDesc%=FtdiBus.NTamd64,USB\VID_0403&PID_6010&MI_00
%USB\VID_0403&PID_6010&MI_01.DeviceDesc%=FtdiBus.NTamd64,USB\VID_0403&PID_6010&MI_01
%USB\VID_0403&PID_6011&MI_00.DeviceDesc%=FtdiBus.NTamd64,USB\VID_0403&PID_6011&MI_00
%USB\VID_0403&PID_6011&MI_01.DeviceDesc%=FtdiBus.NTamd64,USB\VID_0403&PID_6011&MI_01
%USB\VID_0403&PID_6011&MI_02.DeviceDesc%=FtdiBus.NTamd64,USB\VID_0403&PID_6011&MI_02
%USB\VID_0403&PID_6011&MI_03.DeviceDesc%=FtdiBus.NTamd64,USB\VID_0403&PID_6011&MI_03
%USB\VID_0403&PID_6014.DeviceDesc%=FtdiBus.NTamd64,USB\VID_0403&PID_6014
Perhaps the old .inf could be modified to remove support for the VID_0403&PID_6001 (8bit FIFO), in deference to the new driver (including virtual COM ports - VCP & direct USB access via a Dll - D2XX)
The '8372' is an embedded serial port on a FT8U100AX USB1.1 Hub: http://www.ftdichip.com/Products/ICs/FT8U100AX.htm
A newer driver is available to support such devices (v1.00.2162): http://www.ftdichip.com/Drivers/VCP/Win98/R10906.zip
However; it is not WHQL certified.
Better yet, here is the latest WHQL driver (v1.00.2176) to handle those legacy devices (hidden on FTDI's site!): http://www.ftdichip.com/Drivers/VCP/Win2000/R2176.zip
In this case, the PID num's 6001, & 6010 (x2) should be commented out (driver v1.00.2176).
Thanx.
Last edited by TechDud (2013-08-30 03:02:26)
MemTest86+ Video Memory Stress Test D-P-C Driver Latency Tester (Win7-max)