• DrLo
  • DriverPacks newbie
  • Offline
  • Registered: 2010-06-22
  • Posts: 10

Topic: [SLVD] persistent BSoD since 10.06 to 11.01

I'm creating my own unattended version of win xp pro.
I get a blue screen of death (BSoD) with code 0x0004.
The problems comes out just after the first reboot and the unpacking of 7z driverpacks archive, just before the screen in which it uses to install the "true addons".

1) I've tested all the stages until the driverpacks integration and they all work fine.
2) I'm using VirtualBox for testing. Never tried on hardware.
3) The installation has no problem if it goes on an IDE system instead of SATA. So, The error is linked to the mass storage. I'm using 11.01; same problem with the previous version.
4) I've the same blue screen also with a clean install (no true addons or removal of components; only regular hotfixes).

I've had problems also with 10.06 in http://forum.driverpacks.net/viewtopic.php?id=4650.
I'm wondering if someone could help. I would like to use newer mass driver one of these days.

ini

[General]

; preferred language

prefLang	= "English"

; yes/no, enable or disable the wizard-style buttons, if not specified: yes

wizardButtons	= "yes"

; yes/no, enable or disable the GUI, if not specified: yes

GUI		= "yes"





[Settings]

; disc/bartpe/multibootDisc

instPlatform	= "disc"

; trailing backslash is allowed, but not necessary

location	= "C:\Users\Capis\Desktop\AF\02b"

; none/all/select, if select, specify them below, if not specified: all

DriverPacks	= "select"

; 1/2, method to install the DriverPacks, if not specified: 2

DPsMethod	= "2"

; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce

finisherMethod	= "GUIRunOnce"





; this section is optional!

[OptionalSettings]

; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none

KTD		= "false"

; <path>, to specify a custom KTD cache location, if not specified: default (%SystemRoot%\DriverPacks)

KTDlocation	= "%SystemRoot%\DriverPacks"

; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes

QSC		= "yes"





; you should only add this section if you've set [Settings]\DriverPacks to "select"

[SelectDriverPacks]

DP_Chipset	= "yes"

DP_CPU		= "yes"

DP_Graphics_A	= "yes"

DP_Graphics_B	= "yes"

DP_Graphics_C	= "yes"

DP_LAN		= "yes"

DP_MassStorage	= "yes"

DP_Sound_A	= "yes"

DP_Sound_B	= "yes"

DP_WLAN		= "yes"

DPs_3rd_party	= "no"

DP_MassStorage_textmode = "yes"





; this section is optional!

[OptionalSettingsOther]

; CCC/CCP/None, use ATI Catalyst Control Center or ATI Catalyst Control Panel (only relevant when slipstreaming Graphics DriverPack)

; 1/2/3/None, use Nvidia Control Panel - 1 = Old, 2 = New, 3 = Both, None

ATI_cpl		= "CCP"

Nvidia_cpl	= "3"

log

2011-03-26 13:45:17 : <INIT> DriverPacks BASE 10.06 initialized.

2011-03-26 13:45:17 : <INIT> Host environment: WIN_7 Service Pack 1 X86 on a X64 CPU.

2011-03-26 13:45:17 : <INIT> Old temporary working directory deleted.

2011-03-26 13:45:17 : <INIT> Created temporary working directory.

2011-03-26 13:45:17 : <INIT> Imported proxy settings from Internet Explorer.

2011-03-26 13:45:17 : <INIT> Start scanning for DriverPacks for the wnt5_x86-32 platform.

2011-03-26 13:45:17 : <INIT> 	Detected DriverPack Chipset 1101!

2011-03-26 13:45:17 : <INIT> 	Detected DriverPack CPU 1005!

2011-03-26 13:45:17 : <INIT> 	Detected DriverPack Graphics A 1011!

2011-03-26 13:45:17 : <INIT> 	Detected DriverPack Graphics B 10111!

2011-03-26 13:45:17 : <INIT> 	Detected DriverPack Graphics C 1011!

2011-03-26 13:45:17 : <INIT> 	Detected DriverPack LAN 1101!

2011-03-26 13:45:17 : <INIT> 	Detected DriverPack Mass Storage 1011!

2011-03-26 13:45:17 : <INIT> 	Detected DriverPack Mass Storage 1101!

2011-03-26 13:45:17 : <INIT> 	Detected DriverPack Sound A 1009!

2011-03-26 13:45:17 : <INIT> 	Detected DriverPack Sound B 1009!

2011-03-26 13:45:17 : <INIT> 	Detected DriverPack WLAN 1101!

2011-03-26 13:45:17 : <INIT> 	Detected 3rd Party DriverPack Bluetooth 910!

2011-03-26 13:45:17 : <INIT> 	Detected 3rd Party DriverPack Graphics Languages 10111!

2011-03-26 13:45:17 : <INIT> 	Detected 3rd Party DriverPack Graphics PhysX 1011!

2011-03-26 13:45:17 : <INIT> 	Detected 3rd Party DriverPack HID 1101!

2011-03-26 13:45:17 : <INIT> 	Detected 3rd Party DriverPack LAN-RIS 1011!

2011-03-26 13:45:17 : <INIT> 	Detected 3rd Party DriverPack Misc 1011!

2011-03-26 13:45:17 : <INIT> 	Detected 3rd Party DriverPack Modem 1101!

2011-03-26 13:45:17 : <INIT> 	Detected 3rd Party DriverPack Monitor 1005!

2011-03-26 13:45:17 : <INIT> 	Detected 3rd Party DriverPack Runtimes 1011!

2011-03-26 13:45:17 : <INIT> 	Detected 3rd Party DriverPack TV 1005!

2011-03-26 13:45:17 : <INIT> 	Detected 3rd Party DriverPack WebCam 1101!

2011-03-26 13:45:17 : <INIT> 	Finished scanning.

2011-03-26 13:45:17 : <INIT> Detected settings file "M:\Unattend\DriverPacks\DPs_BASE.ini".

2011-03-26 13:45:17 : <INIT> Windows XP Professional -  SP3 detected.

2011-03-26 13:45:17 : <INIT> wnt5_x86-32_disc is the selected installation platform .

2011-03-26 13:45:17 : <INIT> Imported settings from settings file.

2011-03-26 13:45:17 : <GUI>  Initialized GUI.

2011-03-26 13:45:17 : <GUI>  Created a list of all available language files.

2011-03-26 13:45:17 : <GUI>  Set the last used language, English, as the GUI language.

2011-03-26 13:45:20 : <SLIP> Copied DriverPack Graphics B to \OEM.

2011-03-26 13:45:27 : <SLIP> Copied DriverPack Graphics C to \OEM.

2011-03-26 13:45:27 : <SLIP> Copied DriverPack LAN to \OEM.

2011-03-26 13:45:28 : <SLIP> Copied DriverPack Mass Storage to \OEM.

2011-03-26 13:45:37 : <SLIP> Copied DriverPack Sound A to \OEM.

2011-03-26 13:45:44 : <SLIP> Copied DriverPack Sound B to \OEM.

2011-03-26 13:45:46 : <SLIP> Copied DriverPack WLAN to \OEM.

2011-03-26 13:45:46 : <SLIP> Copied DriverPacks to \OEM.

2011-03-26 13:45:46 : <SLIP> Will not slipstream patches, Service Pack 3 was detected.

2011-03-26 13:45:47 : <SLIP> Updated \I386\winnt.sif to support method 2.

2011-03-26 13:45:47 : <SLIP> Updated DPsFnshr.ini to disable KTD.

2011-03-26 13:45:47 : <SLIP> Updated \I386\winnt.sif's GUIRunOnce section.

2011-03-26 13:45:48 : <SLIP> DP_Install_Tool was copied successfully

2011-03-26 13:45:48 : <SLIP> Slipstream finished in 2 minutes and 21 seconds.

2011-03-26 13:45:50 : <CLNP> Temporary working directory successfully deleted.

- = DriverPacks BASE ini settings used = -

[General]

; preferred language

prefLang	= "English"

; yes/no, enable or disable the wizard-style buttons, if not specified: yes

wizardButtons	= "yes"

; yes/no, enable or disable the GUI, if not specified: yes

GUI		= "yes"





[Settings]

; disc/bartpe/multibootDisc

instPlatform	= "disc"

; trailing backslash is allowed, but not necessary

location	= "C:\Users\Capis\Desktop\AF\02b"

; none/all/select, if select, specify them below, if not specified: all

DriverPacks	= "select"

; 1/2, method to install the DriverPacks, if not specified: 2

DPsMethod	= "2"

; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce

finisherMethod	= "GUIRunOnce"





; this section is optional!

[OptionalSettings]

; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none

KTD		= "false"

; <path>, to specify a custom KTD cache location, if not specified: default (%SystemRoot%\DriverPacks)

KTDlocation	= "%SystemRoot%\DriverPacks"

; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes

QSC		= "yes"





; you should only add this section if you've set [Settings]\DriverPacks to "select"

[SelectDriverPacks]

DP_Chipset	= "yes"

DP_CPU		= "yes"

DP_Graphics_A	= "yes"

DP_Graphics_B	= "yes"

DP_Graphics_C	= "yes"

DP_LAN		= "yes"

DP_MassStorage	= "yes"

DP_Sound_A	= "yes"

DP_Sound_B	= "yes"

DP_WLAN		= "yes"

DPs_3rd_party	= "no"

DP_MassStorage_textmode = "yes"





; this section is optional!

[OptionalSettingsOther]

; CCC/CCP/None, use ATI Catalyst Control Center or ATI Catalyst Control Panel (only relevant when slipstreaming Graphics DriverPack)

; 1/2/3/None, use Nvidia Control Panel - 1 = Old, 2 = New, 3 = Both, None

ATI_cpl		= "CCP"

Nvidia_cpl	= "3"

2011-03-26 13:45:51 : <CLNP> Create a DPs_Base.log backup @ M:\Unattend\DriverPacks\LogFiles\DPs_BASE_11-03-26_13-45.log

2011-03-26 13:45:51 : <CLNP> Program terminated.

2011-03-26 13:45:53 : <GUI>  Closed GUI.

2011-03-26 13:45:53 : <GUI>  Saved settings!

- = DriverPacks BASE ini settings used = -

[General]

; preferred language

prefLang	= "English"

; yes/no, enable or disable the wizard-style buttons, if not specified: yes

wizardButtons	= "yes"

; yes/no, enable or disable the GUI, if not specified: yes

GUI		= "yes"





[Settings]

; disc/bartpe/multibootDisc

instPlatform	= "disc"

; trailing backslash is allowed, but not necessary

location	= "C:\Users\Capis\Desktop\AF\02b"

; none/all/select, if select, specify them below, if not specified: all

DriverPacks	= "select"

; 1/2, method to install the DriverPacks, if not specified: 2

DPsMethod	= "2"

; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce

finisherMethod	= "GUIRunOnce"





; this section is optional!

[OptionalSettings]

; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none

KTD		= "false"

; <path>, to specify a custom KTD cache location, if not specified: default (%SystemRoot%\DriverPacks)

KTDlocation	= "%SystemRoot%\DriverPacks"

; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes

QSC		= "yes"





; you should only add this section if you've set [Settings]\DriverPacks to "select"

[SelectDriverPacks]

DP_Chipset	= "yes"

DP_CPU		= "yes"

DP_Graphics_A	= "yes"

DP_Graphics_B	= "yes"

DP_Graphics_C	= "yes"

DP_LAN		= "yes"

DP_MassStorage	= "yes"

DP_Sound_A	= "yes"

DP_Sound_B	= "yes"

DP_WLAN		= "yes"

DPs_3rd_party	= "no"

DP_MassStorage_textmode = "yes"





; this section is optional!

[OptionalSettingsOther]

; CCC/CCP/None, use ATI Catalyst Control Center or ATI Catalyst Control Panel (only relevant when slipstreaming Graphics DriverPack)

; 1/2/3/None, use Nvidia Control Panel - 1 = Old, 2 = New, 3 = Both, None

ATI_cpl		= "CCP"

Nvidia_cpl	= "3"

2011-03-26 13:45:53 : <GUI>  Create a DPs_Base.log backup @ M:\Unattend\DriverPacks\LogFiles\DPs_BASE_11-03-26_13-45-53.log

2011-03-26 13:45:53 : <GUI>  Program terminated.
  • From: Cambridgeshire, UK
  • Registered: 2007-01-27
  • Posts: 6,226

Re: [SLVD] persistent BSoD since 10.06 to 11.01

OK, If you're certain that dpms 9.01 works for you, then I know what to fix.

Fixed for next release:

Fixed
- I3\ moved .ini HWID (PCI\VEN_8086&DEV_2829&CC_0106) from [I8] to fix BSOD (requested here: http://forum.driverpacks.net/viewtopic.php?id=5159)

Personally I think you should test your .iso on your own hardware that's causing the problem first (not just VB).  A BSOD on actual hardware would confirm the problem, and solution.

Read BEFORE you post.  HWID tool   DriverPacks Tutorial   DONATE!
http://driverpacks.net/userbar/admin-1.png
Not all heroes wear capes, some wear Kevlar!
  • From: Cambridgeshire, UK
  • Registered: 2007-01-27
  • Posts: 6,226

Re: [SLVD] persistent BSoD since 10.06 to 11.01

Please test this dpms.
beta v11.03b1 for testing purposes only!

Read BEFORE you post.  HWID tool   DriverPacks Tutorial   DONATE!
http://driverpacks.net/userbar/admin-1.png
Not all heroes wear capes, some wear Kevlar!
  • DrLo
  • DriverPacks newbie
  • Offline
  • Registered: 2010-06-22
  • Posts: 10

Re: [SLVD] persistent BSoD since 10.06 to 11.01

I've tested my .iso on real hardware. It does not work but not in the same way as in virtualbox.
It can't even get to "partition selection screen" and, while loading drivers, it says there's an error in setup.c showing a strange path "D:\xpsp\base...".
((need some screenshots?))
Okay. I'm wondering if it is completely my fault, but I've done the unattending/driverpacking process SeveraL time and using two different original XP disks.

I'm a bit dazed.
I am gonna test the beta right now.

  • From: Cambridgeshire, UK
  • Registered: 2007-01-27
  • Posts: 6,226

Re: [SLVD] persistent BSoD since 10.06 to 11.01

Sounds like your .iso has issues that need fixing BEFORE you introduce DriverPacks.

Read BEFORE you post.  HWID tool   DriverPacks Tutorial   DONATE!
http://driverpacks.net/userbar/admin-1.png
Not all heroes wear capes, some wear Kevlar!
  • DrLo
  • DriverPacks newbie
  • Offline
  • Registered: 2010-06-22
  • Posts: 10

Re: [SLVD] persistent BSoD since 10.06 to 11.01

I know. But... I had used the same XP installation cd (with further improvements) for years until now. It worked until massstorage 9.01. And still the installation goes fine if not involving sata drivers.
I've tried another original XP disc. Same problem two disks. So, maybe the problem is related to other software used: nLite.
I get the same problems with natural installs (no hotfixes, addons or removal; just service packs).
What shall I fix now? I've tried everything.

Anyway, I've tried the beta v11.03b1
Both on the natural install (no hotfixes, addons or removal; just service packs) and the unattended one, it say it cannot find nvatabus2.sys

  • From: Cambridgeshire, UK
  • Registered: 2007-01-27
  • Posts: 6,226

Re: [SLVD] persistent BSoD since 10.06 to 11.01

DrLo wrote:

it say it cannot find nvatabus2.sys

Now that is VERY odd because I can see it in the pack.

Try opening your txtsetup.sif in notepad and (ctrl-h) replacing 'all' of:
nvatabus2.sys
with
NvAtaBus2.sys

I don't think the system is acting case-sensitive, but it's worth a shot.

Read BEFORE you post.  HWID tool   DriverPacks Tutorial   DONATE!
http://driverpacks.net/userbar/admin-1.png
Not all heroes wear capes, some wear Kevlar!
  • From: Cambridgeshire, UK
  • Registered: 2007-01-27
  • Posts: 6,226

Re: [SLVD] persistent BSoD since 10.06 to 11.01

So what happens when you use a plain, original, hologramed, vanilla XP (NO nlite!) disc and add DriverPacks?  Mass Storage doesn't care what SP level the XP disc is.

Read BEFORE you post.  HWID tool   DriverPacks Tutorial   DONATE!
http://driverpacks.net/userbar/admin-1.png
Not all heroes wear capes, some wear Kevlar!
  • DrLo
  • DriverPacks newbie
  • Offline
  • Registered: 2010-06-22
  • Posts: 10

Re: [SLVD] persistent BSoD since 10.06 to 11.01

Hey, guys, FINALLY FIGURED OUT!
Enterily fault of my trust in nLite. I used to make nlite create the bootable .iso from my unattended xp folder.
I had some doubts and I tried to create the .iso myself with mkisofs cmd-line (and an el torito image of the vanilla .iso) -> All Working Fine.

D:\prg\nLite-1.4.9.1>mkisofs -b image1.bin -no-emul-boot -boot-load-seg 1984 -boot-load-size 4 -iso-level 2 -J -l -D -N -joliet-long -relaxed-filenames -o "D:\a.iso" D:\AF\01e

I am wondering: I was the only one having this problem with nLite (latest version)? Anyway, fixed.

Now, how can I ever be forgiven? I've integrated the beta massstorage pack you gave me. So, I can contribute to the feedback. Tell me how.

  • From: Cambridgeshire, UK
  • Registered: 2007-01-27
  • Posts: 6,226

Re: [SLVD] persistent BSoD since 10.06 to 11.01

DrLo wrote:

Now, how can I ever be forgiven?

100 LASHES! And pledge your everlasting loyalty to the almighty DriverPacks! big_smile
Just kidding...

Seriously though, this is exactly why I gave up on using nlite for anything.  It was a good tool for hand-holding when creating unattended installs, but you really need to learn to walk on your own without nlite.  You'll be much happier.  I stick purely with RVMi and modifying files by hand.  It's the only way to be sure.

So the new beta 11.03b1 dpms works fine on your hardware?  THAT'S what I really need to know.

Read BEFORE you post.  HWID tool   DriverPacks Tutorial   DONATE!
http://driverpacks.net/userbar/admin-1.png
Not all heroes wear capes, some wear Kevlar!
  • From: Cambridgeshire, UK
  • Registered: 2007-01-27
  • Posts: 6,226

Re: [SLVD] persistent BSoD since 10.06 to 11.01

Soooooooo...does it work?

Read BEFORE you post.  HWID tool   DriverPacks Tutorial   DONATE!
http://driverpacks.net/userbar/admin-1.png
Not all heroes wear capes, some wear Kevlar!
  • DrLo
  • DriverPacks newbie
  • Offline
  • Registered: 2010-06-22
  • Posts: 10

Re: [SLVD] persistent BSoD since 10.06 to 11.01

Sorry, I've just noticed my previous msg was not sent. Anyway, it worked!
I've only just foundn slow the runonce part of the installation, but I guess it's not driverpacks related. Good job.

  • From: Cambridgeshire, UK
  • Registered: 2007-01-27
  • Posts: 6,226

Re: [SLVD] persistent BSoD since 10.06 to 11.01

OK, thank you for reporting back.
I'll include these fixes into a new dpms build I'm working on and hopefully I'll have a RC for public testing very soon.

Again, thanks for reporting the problem and confirming the fixes.  Your testing has made DriverPacks better! smile

Read BEFORE you post.  HWID tool   DriverPacks Tutorial   DONATE!
http://driverpacks.net/userbar/admin-1.png
Not all heroes wear capes, some wear Kevlar!
  • Eneerge
  • DriverPacks Donor!
  • Offline
  • Registered: 2010-09-17
  • Posts: 3

Re: [SLVD] persistent BSoD since 10.06 to 11.01

I experienced this issue also in VirtualBox.  When testing it on my laptop, however, I never noticed it.  I, too, was also using nLite to generate the autounattended settings and make the ISO.  I will try your alternative way and see if the issue goes away in VirtualBox.

Thanks