Topic: REQ Assistance B10.06, DP 11.01: BartPE - BSOD on boot 0x7B

Hi all,

I require some assistance from people a lot smarter than me smile . I've been trying to get a BartPE build going for a HP 8540p, but keep getting a BSOD when booting.

Technical Information:
*** STOP: 0x0000007B (0xF78DE528,0xC0000034,0x00000000,0x00000000)

What I have done:
- Used BASE version 10.06 + Latest Mass storage driver pack DP_MassStorage_wnt5_x86-32_1101.7z to slipstream into BartPE plugins.
- Confirmed Plugins enabled in PEBuilder
- Built BartPE
- Used PEtoUSB to transfer to USB stick
- Booted from said USB stick
- BSOD.

I've tried v10.11 of the mass storage drivers - no change. (The logs below are from when I tried this...)
Also tried changing SATA emulation to IDE - no change.

DPs_Base.ini

[General]
; preferred language
prefLang	= "English"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons	= "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI		= "yes"


[Settings]
; disc/bartpe/multibootDisc
instPlatform	= "bartpe"
; trailing backslash is allowed, but not necessary
location	= "C:\BartPE\pebuilder3110a\plugin"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks	= "select"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod	= "2"
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod	= "GUIRunOnce"


; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD		= "false"
; <path>, to specify a custom KTD cache location, if not specified: default (%SystemRoot%\DriverPacks)
KTDlocation	= "%SystemRoot%\DriverPacks"
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC		= "no"


; you should only add this section if you've set [Settings]\DriverPacks to "select"
[SelectDriverPacks]
DP_MassStorage	= "no"
DP_MassStorage_textmode = "yes"

DPs_Base.log

2011-02-24 13:55:01 : <INIT> DriverPacks BASE 10.06 initialized.
2011-02-24 13:55:01 : <INIT> Host environment: WIN_XP Service Pack 3 X86 on a X64 CPU.
2011-02-24 13:55:01 : <INIT> Created temporary working directory.
2011-02-24 13:55:01 : <INIT> Imported proxy settings from Internet Explorer.
2011-02-24 13:55:01 : <INIT> Start scanning for DriverPacks for the wnt5_x86-32 platform.
2011-02-24 13:55:01 : <INIT> 	Detected DriverPack Mass Storage 1011!
2011-02-24 13:55:01 : <INIT> 	Could not detect any 3rd party DriverPacks for wnt5_x86-32.
2011-02-24 13:55:01 : <INIT> 	Finished scanning.
2011-02-24 13:55:01 : <INIT> Could not find settings file"C:\BartPE\Driverpack_BASE\DPs_BASE.ini".
2011-02-24 13:55:01 : <INIT> [General]\prefLang not specified: default (English) was set.
2011-02-24 13:55:01 : <INIT> [General]\wizdButtons not specified: default (yes) was set.
2011-02-24 13:55:01 : <INIT> [General]\GUI not specified: default (yes) was set.
2011-02-24 13:55:01 : <INIT> [Settings]\DPsMethod not specified: default (2) was set.
2011-02-24 13:55:01 : <INIT> [Settings]\finisherMethod not specified: default (GUIRunOnce) was set.
2011-02-24 13:55:01 : <INIT> [OptionalSettings]\KTD not specified: default (false) was set.
2011-02-24 13:55:01 : <INIT> [OptionalSettings]\QSC not specified: default (yes) was set.
2011-02-24 13:55:01 : <INIT> [OptionalSettingsOther]\ATI_cpl not specified: default (None) was set.
2011-02-24 13:55:01 : <INIT> [OptionalSettingsOther]\Nvidia_cpl not specified: default (None) was set.
2011-02-24 13:55:01 : <INIT> QuickStream Cache directory not found!
2011-02-24 13:55:01 : <GUI>  Initialized GUI.
2011-02-24 13:55:01 : <GUI>  Created a list of all available language files.
2011-02-24 13:55:01 : <GUI>  Set the last used language, English, as the GUI language.
2011-02-24 13:55:11 : <GUI>  Refreshed UpdateChecker with success.
2011-02-24 13:55:19 : <GUI>  any_any_any is the selected installation platform .
2011-02-24 13:55:19 : <GUI>  Changed installation platform from "disc" to "bartpe".
2011-02-24 13:55:31 : <GUI>  Changed Windows installation files OR export (depending on the installation platform) location to C:\BartPE\pebuilder3110a\plugin.
2011-02-24 13:55:31 : <GUI>  wnt5_x86-32_bartpe is the selected installation platform .
2011-02-24 13:55:38 : <GUI>  Saved settings!
2011-02-24 13:55:38 : <GUI>  Closed GUI.
2011-02-24 13:55:38 : <SEL>  Selected module: mod_slip_wnt5_x86-32_bartpe.
2011-02-24 13:55:38 : <PREP> Copying DPs_Base and the DriverPacks now
2011-02-24 13:55:38 : <PREP> C:\BartPE\pebuilder3110a\plugin\DriverPacks.net\BASE\BASE.inf info written.
2011-02-24 13:55:38 : <PREP> C:\BartPE\pebuilder3110a\plugin\DriverPacks.net\MassStorage\MassStorage.inf header info written.
2011-02-24 13:55:54 : <SLIP> Extracted DriverPack MassStorage to a temporary working directory.
2011-02-24 13:55:54 : <SLIP> C:\BartPE\Driverpack_BASE\tmp\DPMtmp\DriverPack_MassStorage_wnt5_x86-32.ini
2011-02-24 13:55:55 : <SLIP> Processing Mass Storage files now. This may take a minute.
2011-02-24 13:56:09 : <SLIP> Copied DriverPack MassStorage text mode driver files to BartPE Plugin folder.
2011-02-24 13:56:09 : <SLIP> Slipstreamed DriverPack MassStorage text mode driver files.
2011-02-24 13:56:13 : <SLIP> Updated the MassStorage.ini [SetValue] sections to support DP MassStorage text mode drivers.
2011-02-24 13:56:13 : <PLUGIN> Saved settings!
2011-02-24 13:56:13 : <PLUGIN> Slipstream finished in 34 seconds.
2011-02-24 13:56:21 : <CLNP> Temporary working directory successfully deleted.
- = DriverPacks BASE ini settings used = -
[General]
; preferred language
prefLang	= "English"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons	= "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI		= "yes"


[Settings]
; disc/bartpe/multibootDisc
instPlatform	= "bartpe"
; trailing backslash is allowed, but not necessary
location	= "C:\BartPE\pebuilder3110a\plugin"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks	= "select"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod	= "2"
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod	= "GUIRunOnce"


; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD		= "false"
; <path>, to specify a custom KTD cache location, if not specified: default (%SystemRoot%\DriverPacks)
KTDlocation	= "%SystemRoot%\DriverPacks"
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC		= "no"


; you should only add this section if you've set [Settings]\DriverPacks to "select"
[SelectDriverPacks]
DP_MassStorage	= "no"
DP_MassStorage_textmode = "yes"
2011-02-24 13:56:21 : <CLNP> Create a DPs_Base.log backup @ C:\BartPE\Driverpack_BASE\LogFiles\DPs_BASE_11-02-24_13-56.log
2011-02-24 13:56:21 : <CLNP> Program terminated.

Hardware IDs

=========== 
PCI Devices 
=========== 
PCI\VEN_1180&DEV_0476&SUBSYS_1521103C&REV_BB\4&E8DA9B9&0&35F0: Ricoh R/RL/5C476(II) or Compatible CardBus Controller
PCI\VEN_8086&DEV_10EA&SUBSYS_1521103C&REV_05\3&21436425&0&C8: Intel(R) 82577LM Gigabit Network Connection
PCI\VEN_8086&DEV_3B48&SUBSYS_1521103C&REV_05\3&21436425&0&E3: Intel(R) 5 Series/3400 Series Chipset Family PCI Express Root Port 4 - 3B48
PCI\VEN_1180&DEV_0592&SUBSYS_1521103C&REV_14\4&E8DA9B9&0&33F0: Ricoh Memory Stick Controller
PCI\VEN_8086&DEV_2448&SUBSYS_1521103C&REV_A5\3&21436425&0&F0: Intel(R) 82801 PCI Bridge - 2448
PCI\VEN_8086&DEV_3B50&SUBSYS_1521103C&REV_05\3&21436425&0&E7: Intel(R) 5 Series/3400 Series Chipset Family PCI Express Root Port 8 - 3B50
PCI\VEN_1180&DEV_0822&SUBSYS_1521103C&REV_25\4&E8DA9B9&0&31F0: SDA Standard Compliant SD Host Controller
PCI\VEN_8086&DEV_2C62&SUBSYS_80868086&REV_02\3&4F11E61&0&00 : QuickPath Architecture Generic Non-core Registers - 2C62
PCI\VEN_8086&DEV_3B2F&SUBSYS_1521103C&REV_05\3&21436425&0&FA: Intel(R) PCHM SATA AHCI Controller 6 Port
PCI\VEN_8086&DEV_3B56&SUBSYS_1521103C&REV_05\3&21436425&0&D8: High Definition Audio Controller
PCI\VEN_8086&DEV_2D01&SUBSYS_80868086&REV_02\3&4F11E61&0&01 : QuickPath Architecture System Address Decoder - 2D01
PCI\VEN_1180&DEV_0832&SUBSYS_1521103C&REV_06\4&E8DA9B9&0&30F0: Ricoh 1394 OHCI Compliant Host Controller
PCI\VEN_8086&DEV_3B32&SUBSYS_1521103C&REV_05\3&21436425&0&FE: Intel(R) Turbo Boost Technology Driver
PCI\VEN_8086&DEV_3B64&SUBSYS_1521103C&REV_06\3&21436425&0&B0: Intel(R) Management Engine Interface
PCI\VEN_8086&DEV_2D10&SUBSYS_80868086&REV_02\3&4F11E61&0&10 : QPI Link 0 - 2D10
PCI\VEN_1180&DEV_0843&SUBSYS_1521103C&REV_14\4&E8DA9B9&0&32F0: Ricoh SD/MMC Host Controller
PCI\VEN_8086&DEV_3B34&SUBSYS_1521103C&REV_05\3&21436425&0&E8: Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34
PCI\VEN_1033&DEV_0194&SUBSYS_1521103C&REV_03\FFFFFFFFFFFFFFFF00: NEC Electronics USB 3.0 Host Controller
PCI\VEN_8086&DEV_3B67&SUBSYS_1521103C&REV_06\3&21436425&0&B3: Intel(R) Active Management Technology - SOL (COM4)
PCI\VEN_8086&DEV_2D11&SUBSYS_80868086&REV_02\3&4F11E61&0&11 : QPI Physical 0 - 2D11
PCI\VEN_1180&DEV_0852&SUBSYS_1521103C&REV_14\4&E8DA9B9&0&34F0: Ricoh xD-Picture Card Controller
PCI\VEN_8086&DEV_3B3C&SUBSYS_1521103C&REV_05\3&21436425&0&D0: Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C
PCI\VEN_8086&DEV_4238&SUBSYS_11118086&REV_35\0024D7FFFF7B296C00: Intel(R) Centrino(R) Ultimate-N 6300 AGN
PCI\VEN_8086&DEV_2D12&SUBSYS_80868086&REV_02\3&4F11E61&0&12 : PCI standard host CPU bridge
PCI\VEN_10DE&DEV_0A2C&SUBSYS_1521103C&REV_A2\4&2CA8BF17&0&0008: NVIDIA NVS 5100M
PCI\VEN_8086&DEV_0044&SUBSYS_1521103C&REV_02\3&21436425&0&00: Intel(R) processor DRAM Controller - 0044
PCI\VEN_8086&DEV_3B42&SUBSYS_1521103C&REV_05\3&21436425&0&E0: Intel(R) 5 Series/3400 Series Chipset Family PCI Express Root Port 1 - 3B42
PCI\VEN_8086&DEV_2D13&SUBSYS_80868086&REV_02\3&4F11E61&0&13 : PCI standard host CPU bridge
PCI\VEN_10DE&DEV_0BE2&SUBSYS_1521103C&REV_A1\4&2CA8BF17&0&0108: High Definition Audio Controller
PCI\VEN_8086&DEV_0045&SUBSYS_1521103C&REV_02\3&21436425&0&08: Intel(R) processor PCI Express Root Port - 0045
PCI\VEN_8086&DEV_3B07&SUBSYS_1521103C&REV_05\3&21436425&0&F8: Intel(R) QM57 Express Chipset LPC Interface Controller - 3B07
PCI\VEN_8086&DEV_3B44&SUBSYS_1521103C&REV_05\3&21436425&0&E1: Intel(R) 5 Series/3400 Series Chipset Family PCI Express Root Port 2 - 3B44
32 matching device(s) found.
 
=========== 
USB Devices 
=========== 
USB\VID_8087&PID_0020\5&3DD8D5A&0&1                         : Generic USB Hub
USB\VID_8087&PID_0020\5&B12D121&0&1                         : Generic USB Hub
USBSTOR\DISK&VEN_KINGSTON&PROD_DATATRAVELER_G2&REV_PMAP\001CC0EC3467EA41100002F0&0: Kingston DataTraveler G2 USB Device
USB\ROOT_HUB20\4&1B2F9866&0                                 : USB Root Hub
USB\ROOT_HUB20\4&2B14A31&0                                  : USB Root Hub
USB\VID_03F0&PID_231D\6&3846A4C8&0&1                        : HP Integrated Module with Bluetooth 2.1 Wireless Technology
USB\VID_04F2&PID_B15E\6&3846A4C8&0&5                        : USB Composite Device
USB\VID_04F2&PID_B15E&MI_00\7&2B1A3BD6&0&0000               : HP Webcam [2 MP Macro]
USB\VID_0951&PID_1624\001CC0EC3467EA41100002F0              : USB Mass Storage Device
USB\VID_138A&PID_0007\3B1038FA6401                          : Validity Sensor
10 matching device(s) found.
 
============= 
Input Devices 
============= 
No matching devices found.
 
============ 
ACPI Devices 
============ 
ACPI\PNP0C0A\1                                              : Microsoft ACPI-Compliant Control Method Battery
ACPI\PNP0C0A\2                                              : Microsoft ACPI-Compliant Control Method Battery
ACPI\PNP0C0D\2&DABA3FF&2                                    : ACPI Lid
ACPI\HPQ0004\3&21436425&0                                   : HP Mobile Data Protection Sensor
ACPI\PNP0C0E\2&DABA3FF&2                                    : ACPI Sleep Button
ACPI\IFX0102\4&9B8ED25&0                                    : Trusted Platform Module 1.2
ACPI\PNP0C14\0                                              : Microsoft Windows Management Interface for ACPI
ACPI\PNP0C14\MXM2                                           : Microsoft Windows Management Interface for ACPI
ACPI\INT0800\4&9B8ED25&0                                    : Intel(R) 82802 Firmware Hub Device
ACPI\ACPI0003\2&DABA3FF&2                                   : Microsoft AC Adapter
ACPI\PNP0C14\NVIF                                           : Microsoft Windows Management Interface for ACPI
ACPI\INT340E\2&DABA3FF&2                                    : Motherboard resources
ACPI\FIXEDBUTTON\2&DABA3FF&2                                : ACPI Fixed Feature Button
ACPI\PNP0C32\1                                              : Direct Application Launch Button
ACPI\SYN0166\4&9B8ED25&0                                    : Synaptics PS/2 Port TouchPad
ACPI\PNP0000\4&9B8ED25&0                                    : Programmable interrupt controller
ACPI\GENUINEINTEL_-_X86_FAMILY_6_MODEL_37_-_INTEL(R)_CORE(TM)_I5_CPU_______M_580__@_2.67GHZ\_0: Intel(R) Core(TM) i5 CPU       M 580  @ 2.67GHz
ROOT\ACPI_HAL\0000                                          : ACPI x86-based PC
ACPI\THERMALZONE\BATZ                                       : ACPI Thermal Zone
ACPI\PNP0100\4&9B8ED25&0                                    : System timer
ACPI\THERMALZONE\CPUZ                                       : ACPI Thermal Zone
ACPI\PNP0103\0                                              : High precision event timer
ACPI\PNP0200\4&9B8ED25&0                                    : Direct memory access controller
ACPI\THERMALZONE\EGXZ                                       : ACPI Thermal Zone
ACPI\THERMALZONE\EX2Z                                       : ACPI Thermal Zone
ACPI\PNP0303\4&9B8ED25&0                                    : Standard 101/102-Key or Microsoft Natural PS/2 Keyboard with HP QLB
ACPI\GENUINEINTEL_-_X86_FAMILY_6_MODEL_37_-_INTEL(R)_CORE(TM)_I5_CPU_______M_580__@_2.67GHZ\_1: Intel(R) Core(TM) i5 CPU       M 580  @ 2.67GHz
ACPI\THERMALZONE\EXTZ                                       : ACPI Thermal Zone
ACPI\PNP0401\5&26F3560A&0                                   : ECP Printer Port (LPT1)
ACPI\THERMALZONE\GFXZ                                       : ACPI Thermal Zone
ACPI\PNP0A03\FF                                             : PCI bus
ACPI\THERMALZONE\LOCZ                                       : ACPI Thermal Zone
ACPI\PNP0A06\4&9B8ED25&0                                    : Extended IO Bus
ACPI\THERMALZONE\MCHZ                                       : ACPI Thermal Zone
ACPI\GENUINEINTEL_-_X86_FAMILY_6_MODEL_37_-_INTEL(R)_CORE(TM)_I5_CPU_______M_580__@_2.67GHZ\_2: Intel(R) Core(TM) i5 CPU       M 580  @ 2.67GHz
ACPI\PNP0A08\2&DABA3FF&2                                    : PCI bus
ACPI\THERMALZONE\PCHZ                                       : ACPI Thermal Zone
ACPI\PNP0B00\4&9B8ED25&0                                    : System CMOS/real time clock
ACPI\THERMALZONE\PWMZ                                       : ACPI Thermal Zone
ACPI\PNP0C02\1                                              : Motherboard resources
ACPI_HAL\PNP0C08\0                                          : Microsoft ACPI-Compliant System
ACPI\PNP0C02\2                                              : Motherboard resources
ACPI\PNP0C04\4&9B8ED25&0                                    : Numeric data processor
ACPI\GENUINEINTEL_-_X86_FAMILY_6_MODEL_37_-_INTEL(R)_CORE(TM)_I5_CPU_______M_580__@_2.67GHZ\_3: Intel(R) Core(TM) i5 CPU       M 580  @ 2.67GHz
ACPI\PNP0C09\1                                              : Microsoft ACPI-Compliant Embedded Controller
45 matching device(s) found.
 
============ 
 HDA Audio 
============ 
HDAUDIO\FUNC_01&VEN_10DE&DEV_000A&SUBSYS_10DE0101&REV_1001\5&1620A722&0&0101: NVIDIA High Definition Audio
HDAUDIO\FUNC_01&VEN_10DE&DEV_000A&SUBSYS_10DE0101&REV_1001\5&1620A722&0&0201: NVIDIA High Definition Audio
HDAUDIO\FUNC_01&VEN_10DE&DEV_000A&SUBSYS_10DE0101&REV_1001\5&1620A722&0&0301: NVIDIA High Definition Audio
HDAUDIO\FUNC_01&VEN_111D&DEV_7603&SUBSYS_103C1521&REV_1002\4&14A860D5&0&0001: IDT High Definition Audio CODEC
HDAUDIO\FUNC_02&VEN_11C1&DEV_1040&SUBSYS_103C3066&REV_1002\4&14A860D5&0&0101: LSI HDA Modem
HDAUDIO\FUNC_01&VEN_10DE&DEV_000A&SUBSYS_10DE0101&REV_1001\5&1620A722&0&0001: NVIDIA High Definition Audio
6 matching device(s) found.
 
============ 
RAID Devices 
============ 
PCI\VEN_8086&DEV_3B2F&SUBSYS_1521103C&REV_05\3&21436425&0&FA
    Name: Intel(R) PCHM SATA AHCI Controller 6 Port
    Hardware ID's:
        PCI\VEN_8086&DEV_3B2F&SUBSYS_1521103C&REV_05
        PCI\VEN_8086&DEV_3B2F&SUBSYS_1521103C
        PCI\VEN_8086&DEV_3B2F&CC_010601
        PCI\VEN_8086&DEV_3B2F&CC_0106
    Compatible ID's:
        PCI\VEN_8086&DEV_3B2F&REV_05
        PCI\VEN_8086&DEV_3B2F
        PCI\VEN_8086&CC_010601
        PCI\VEN_8086&CC_0106
        PCI\VEN_8086
        PCI\CC_010601
        PCI\CC_0106
1 matching device(s) found.

If there is any info I've missed, my appologies.

Re: REQ Assistance B10.06, DP 11.01: BartPE - BSOD on boot 0x7B

Squashyport wrote:

Hi all,

I require some assistance from people a lot smarter than me smile

Rats... we don't have anyone like that here big_smile.

Welcome to DriverPacks.net!

Excellent first post sir! Nope you did not miss anything. Gold star awarded...

BRB ... looking it over now.

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

Re: REQ Assistance B10.06, DP 11.01: BartPE - BSOD on boot 0x7B

should be supported...

DriverPack_MassStorage_wnt5_x86-32.ini file contains

[I8]
; 10.1.0.1008 
ms_count=1
ms_1_deviceName="Intel ICH9/ICH10 SATA AHCI/RAID"

PCI\VEN_8086&DEV_3B2F&CC_0106

In previous versions this was supported by I4 which is now commented out.

you could try commenting I8 and uncommenting I4 and report the results... TIA


We may have to revert this HWID back to the I4 driver...

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

Re: REQ Assistance B10.06, DP 11.01: BartPE - BSOD on boot 0x7B

Thanks for the reply.

Did as you suggested - no change.

Re: REQ Assistance B10.06, DP 11.01: BartPE - BSOD on boot 0x7B

I assume you repacked the 7z file and reran BASE, making sure you used the pack you modified, and rebuilt the plugin and rebuilt your BartPE disc?

Hmmm strange...

Try disableing the mass plugin rebuilding your BartPE disc
and supplying the F6 drivers from the manufacturer... and report.

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

Re: REQ Assistance B10.06, DP 11.01: BartPE - BSOD on boot 0x7B

Your assumption is correct, did exactly as you described.

I'll try that and report. It'll have to wait until I get back to work Monday wink

Last edited by Squashyport (2011-02-25 22:30:45)