• vjuyav
  • DriverPacks newbie
  • Offline
  • Registered: 2006-09-06
  • Posts: 2

Topic: [SOLVED, NEEDSREPLY] VIA VT8237R: BSOD before GUI-mode-setup

System Details :

Intel 531
VIA P4M800(North) with VT8237R+(South)
Seagate 7200.09 SATA2 (150 mb/s, SATA1 jumper set, Single HDD not RAID)
Windows XP SP2 with DriverPacks slipstreamed
--------------------------------------------------------------------------------------------------------

I slipstreamed DriverPacks MassStorage Drivers into WINXP SP2

After text-mode-setup finished,
before GUI-mode-setup started,
system halt (blue screen shows) saying

"Unknown hard error :
STOP:c000021a unknown hard Error.... "

Oddly, I've tried 4 times of setup changing slipstream method (1 to 2), KTD or not
Just one time I passed GUI Setup but failed normal uses (infinitely reboot even safe mode)
anyway with same method, nextime, I failed to enter in GUI-mode-setup

Unfortunately...
I also tried manual slipstreaming VIA sata-raid controller in 2 ways

1. add drivers (viamraid.sys, extras) in $oem$ / i386 , edit txtsetup.inf - pretty normal way
2. MSFN GDragoN's method, attach only 2 sys files, edit only txtsetup.inf - u might seen in msfn forum

but neither works showing blue screen

" ......... ntdl.dll error .......... " (not clearly remember)

...

Now I have no idea to figure out this SXXT problem
I feel really sick of watching my PC shut xxxx by blue screen

Please give me a hint
PEACE!

PS. Understand my stupid english. I'm not mother tongue english

Last edited by vjuyav (2006-09-06 12:22:31)

  • From: Hasselt, Belgium
  • Registered: 2006-05-26
  • Posts: 2,609

Re: [SOLVED, NEEDSREPLY] VIA VT8237R: BSOD before GUI-mode-setup

Sounds like either a corrupt image or a faulty CD/DVD. Please recreate the ISO and then burn it to a different CD/DVD. That should do the trick.

Founder of DriverPacks.net — wimleers.com

Wim Leers's Website

  • From: MI - U.S.A.
  • Registered: 2006-05-27
  • Posts: 301

Re: [SOLVED, NEEDSREPLY] VIA VT8237R: BSOD before GUI-mode-setup

*off-topic*
Have I ever mentioned... I hate VIA SATA... But I hate the ULI chipset more....

  • vjuyav
  • DriverPacks newbie
  • Offline
  • Registered: 2006-09-06
  • Posts: 2

Re: [SOLVED, NEEDSREPLY] VIA VT8237R: BSOD before GUI-mode-setup

Relief that is solved off topic but

I can't find where the answer is
Before I post this topic and right just before, I gave a searching glance about via sata (vt8237R plus) in this forum

Please link the answers or explain how 2 to T-T

  • From: Hasselt, Belgium
  • Registered: 2006-05-26
  • Posts: 2,609

Re: [SOLVED, NEEDSREPLY] VIA VT8237R: BSOD before GUI-mode-setup

vjuyav wrote:

Relief that is solved off topic but

I can't find where the answer is
Before I post this topic and right just before, I gave a searching glance about via sata (vt8237R plus) in this forum

Please link the answers or explain how 2 to T-T

I already posted the answer:

Bâshrat the Sneaky wrote:

Sounds like either a corrupt image or a faulty CD/DVD. Please recreate the ISO and then burn it to a different CD/DVD. That should do the trick.

Hence the 'NEEDSREPLY' in the topic title! wink It means I still need your confirmation that that was indeed the solution.

Founder of DriverPacks.net — wimleers.com

Wim Leers's Website

  • Registered: 2006-09-23
  • Posts: 19

Re: [SOLVED, NEEDSREPLY] VIA VT8237R: BSOD before GUI-mode-setup

Same problem that vjuyav.

Same Chipsets, MotherBoard Abit SG-85 for AMD Athlon 64 754.CD Seagate Barracuda 7200.9 80Gb SATA2 with jumper for SATA1 (with SATA2 Mode Mb freezes in bios screen)

I tried rebuilding package, rebuilding ISO, reburning CD (in different type of CD) and nothing to do, I tried Activating it in SATA Mode and IDE Mode, and when get to enter Gui Mode, this crashes, this is the error message:

0x0000007B(0xF79D1528,0xC0000034,0x00000000,0x00000000)

I tried Method 2 with text drivers....

this is the errot that handle to me.... for your attention, thanks

Last edited by Bionicmaster (2006-10-07 01:01:41)

  • From: Hasselt, Belgium
  • Registered: 2006-05-26
  • Posts: 2,609

Re: [SOLVED, NEEDSREPLY] VIA VT8237R: BSOD before GUI-mode-setup

Could you please post your DPs_BASE.ini and upload the original driver that came with that motherboard? Als you could try to integrate this specific driver using nLite.

Founder of DriverPacks.net — wimleers.com

Wim Leers's Website

  • Registered: 2006-09-23
  • Posts: 19

Re: [SOLVED, NEEDSREPLY] VIA VT8237R: BSOD before GUI-mode-setup

[General]
; preferred language
prefLang	= "Spanish"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons	= "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI		= "yes"


[Settings]
; disc/bartpe/multibootDisc
instPlatform	= "disc"
; trailing backslash is allowed, but not necessary
location	= "F:\winv4"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks	= "select"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod	= "2"
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod	= "GUIRunOnce"


; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD		= "none"
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC		= "yes"


; you should only add this section if you've set [Settings]\DriverPacks to "select"
[SelectDriverPacks]
DP_Chipset	= "yes"
DP_CPU		= "yes"
DP_Graphics_A	= "no"
DP_Graphics_B	= "yes"
DP_Graphics_C	= "no"
DP_LAN		= "yes"
DP_MassStorage	= "no"
DP_Sound_A	= "yes"
DP_Sound_B	= "yes"
DP_WLAN		= "yes"
DP_MassStorage_textmode = "yes"


; this section is optional!
[OptionalSettingsOther]
; CCC/CCP, use ATI Catalyst Control Center or ATI Catalyst Control Panel (only relevant when slipstreaming DriverPack Graphics A)
ATI_cpl		= "CCC"

At final stage I tried with Normal Windows installation and functions, I needed Machine, I'm rebuilding cd from scratch, but I have another 2 problems..... I post it in Support