• Registered: 2010-04-07
  • Posts: 2

Topic: Required Windows drivers were removed from the source

Hi!
I'd like to integrate drivers into a XP RIS Image with the beginners guide (http://driverpacks.net/docs/beginners-guide-windows-xp). After klicking hat "Slipstream!" button I get the error message that "Required Windows drivers were removed from the source"... But I did'nt remove any files from the source folder.

I found this artivcle (http://bugtracker.driverpacks.net/view.php?id=505) but is there a solution yet?

Here is the DPs_BASE.log:

2010-04-19 12:09:31 : <INIT> DriverPacks BASE 8.12.5 initialized.
2010-04-19 12:09:31 : <INIT> Host environment: WIN_2003 Service Pack 2 on X86 CPU.
2010-04-19 12:09:31 : <INIT> Created temporary working directory.
2010-04-19 12:09:31 : <INIT> Imported proxy settings from Internet Explorer.
2010-04-19 12:09:31 : <INIT> Start scanning for DriverPacks for the wnt5_x86-32 platform.
2010-04-19 12:09:31 : <INIT>     Detected DriverPack Chipset 1002!
2010-04-19 12:09:31 : <INIT>     Detected DriverPack CPU 912!
2010-04-19 12:09:31 : <INIT>     Detected DriverPack Graphics A 1004!
2010-04-19 12:09:31 : <INIT>     Detected DriverPack Graphics B 1004!
2010-04-19 12:09:31 : <INIT>     Detected DriverPack Graphics C 1003!
2010-04-19 12:09:31 : <INIT>     Detected DriverPack LAN 10041!
2010-04-19 12:09:31 : <INIT>     Detected DriverPack MassStorage 901!
2010-04-19 12:09:31 : <INIT>     Detected DriverPack Sound A 1003!
2010-04-19 12:09:31 : <INIT>     Detected DriverPack Sound B 1003!
2010-04-19 12:09:31 : <INIT>     Detected DriverPack WLAN 1003!
2010-04-19 12:09:31 : <INIT>     Could not detect any 3rd party DriverPacks for wnt5_x86-32.
2010-04-19 12:09:31 : <INIT>     Finished scanning.
2010-04-19 12:09:31 : <INIT> Detected settings file "D:\Drivers\DPs_BASE_8125\DPs_BASE.ini".
2010-04-19 12:09:31 : <INIT> Windows XP Professional -  Retail SP3 detected.
2010-04-19 12:09:31 : <INIT> [Settings]\DPsMethod not specified: default (2) was set.
2010-04-19 12:09:31 : <INIT> [Settings]\finisherMethod not specified: default (GUIRunOnce) was set.
2010-04-19 12:09:31 : <INIT> [OptionalSettings]\KTD not specified: default (none) was set.
2010-04-19 12:09:31 : <INIT> [OptionalSettings]\QSC not specified: default (yes) was set.
2010-04-19 12:09:31 : <INIT> [OptionalSettingsOther]\ATI_cpl not specified: default (None) was set.
2010-04-19 12:09:31 : <INIT> [OptionalSettingsOther]\Nvidia_cpl not specified: default (None) was set.
2010-04-19 12:09:31 : <INIT> wnt5_x86-32_disc is the selected installation platform .
2010-04-19 12:09:31 : <INIT> Imported settings from settings file.
2010-04-19 12:09:31 : <GUI>  Initialized GUI.
2010-04-19 12:09:31 : <GUI>  Created a list of all available language files.
2010-04-19 12:09:32 : <GUI>  Set the last used language, German, as the GUI language.
2010-04-19 12:09:34 : <GUI>  Saved settings!
2010-04-19 12:09:34 : <GUI>  Closed GUI.
2010-04-19 12:09:34 : <SEL>  Selected module: mod_slip_wxp_x86-32_disc_m2.
2010-04-19 12:09:36 : <PREP> Removed all attributes from \I386.
2010-04-19 12:09:36 : <CRIT> Required Windows drivers were removed from the source
2010-04-19 12:14:12 : <CLNP> Temporary working directory successfully deleted.
- = DriverPacks BASE ini settings used = -
[General]
; preferred language
prefLang    = "German"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons    = "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI        = "yes"


[Settings]
; disc/bartpe/multibootDisc
instPlatform    = "disc"
; trailing backslash is allowed, but not necessary
location    = "D:\RemoteInstall\Setup\English\Images\EN_X86_XP_PRO_SP3_VL"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks    = "all"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod    = "2"
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod    = "RunOnceEx"


; you should only add this section if you've set [Settings]\finishMethod to "RunOnceEx"
[RunOnceExSettings]
; custom/default, if not specified: default
startID        = "default"


; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD        = "false"
; <path>, to specify a custom KTD cache location, if not specified: default (%SystemRoot%\DriverPacks)
KTDlocation    = "%SystemRoot%\DriverPacks"
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC        = "no"


; this section is optional!
[OptionalSettingsOther]
; CCC/CCP/None, use ATI Catalyst Control Center or ATI Catalyst Control Panel (only relevant when slipstreaming DriverPack Graphics A)
; 1/2/3/None, use Nvidia Control Panel - 1 = Old, 2 = New, 3 = Both, None
ATI_cpl        = "CCC"
Nvidia_cpl    = "2"
2010-04-19 12:14:13 : <CLNP> Create a DPs_Base.log backup @ D:\Drivers\DPs_BASE_8125\LogFiles\DPs_BASE_10-04-19_12-14.log
2010-04-19 12:14:13 : <CLNP> Program terminated.

Last edited by syspreppi (2010-04-19 22:00:43)

  • OverFlow
  • DriverPacks Administrator & BASE Developer
  • Offline
  • From: Cincinnati
  • Registered: 2006-12-02
  • Posts: 6,730

Re: Required Windows drivers were removed from the source

Same answer as given to that bug report

I wrote:

This is not a Crash. BASE exited normally
And informed you that your source is not valid.

YOU REMOVED CRITICAL DRIVERS FROM YOUR SOURCE!

EXACTLY AS IT TOLD YOU! USER ERROR!

The error message is by design, and worked exactly as it was intended to.

Don't remove the native drivers if you do then DriverPacks will not work.
this is not a DriverPacks error it is user error.

DriverPacks will not use a source that has any required critical drivers removed.

If the files were not missing then DriverPacks BASE would not report them as missing wink.

We have been unable to figure out how to fix user error as yet wink

start over by copying your original hologram-ed windows XP CD to your HDD... Run DriverPacks BASE on that.
Now there are no errors.

Your source is corrupted... as DriverPacks BASE already told you.

It is not really even important which file it found missing... BASE is not capable of doing a full verify on your source. If one file is missing it is reasonable to assume that others are also missing.

Since we can not provide you with a valid source it is beyond our ability to fix.
(Again this is not a DriverPacks error it is an error with your source)

You need to start over with a clean source.

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

OverFlow's Website