• Registered: 2006-05-31
  • Posts: 36

Topic: [CLOSED] W2K: Promise SATA 378 not detected during text mode setup

just tryed the newest dpbase 6.0.8.6 (default settings) with all the updated dp (only the "old" 6.0.8 sound a )and the newest modem pack on a win200 sp4 o.s.
in the driverpack selection page i have choose the "select all" button
but only the hd connected to the pata controller are shown (true install not with a virtualizer obviously) in the disk select before the os installation

the controller are:
sata promise NOT in raid
sata via NOT in raid
pata via
(a8v deluxe)

Last edited by Toblerone (2006-08-30 06:44:44)

  • From: Hasselt, Belgium
  • Registered: 2006-05-26
  • Posts: 2,609

Re: [CLOSED] W2K: Promise SATA 378 not detected during text mode setup

Please post your DPs_BASE.ini and DPs_BASE.log.

Founder of DriverPacks.net — wimleers.com

Wim Leers's Website

  • Registered: 2006-05-31
  • Posts: 36

Re: [CLOSED] W2K: Promise SATA 378 not detected during text mode setup

ty for the quick reply
unlucky i have retryed to launch the dpbase for control the settings and the log is gone
i can retry... just now to rebuild one .. and post the log (and retry the install)

this is the ini

[General]
; preferred language
prefLang	= "English"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons	= "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI		= "yes"


[Settings]
; disc/bartpe/multibootDisc
instPlatform	= "disc"
; trailing backslash is allowed, but not necessary
location	= "E:\Win2000 Sp4"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks	= "all"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod	= "2"
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod	= "GUIRunOnce"


; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD		= "none"
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC		= "yes"


; this section is optional!
[OptionalSettingsOther]
; CCC/CCP, use ATI Catalyst Control Center or ATI Catalyst Control Panel (only relevant when slipstreaming DriverPack Graphics A)
ATI_cpl		= "CCC"

Last edited by Bâshrat the Sneaky (2006-08-30 06:56:42)

  • From: Hasselt, Belgium
  • Registered: 2006-05-26
  • Posts: 2,609

Re: [CLOSED] W2K: Promise SATA 378 not detected during text mode setup

Please use CODE tags next time!

Founder of DriverPacks.net — wimleers.com

Wim Leers's Website

  • Registered: 2006-05-31
  • Posts: 36

Re: [CLOSED] W2K: Promise SATA 378 not detected during text mode setup

sorry ...
this this the log with the retry
a bit of time and i can test it again

2006-08-29 21:11:18 : <INIT> DriverPacks BASE 6.08.6 initialized.

2006-08-29 21:11:18 : <INIT> Host environment: WIN_2000 Service Pack 4 on X86 CPU.

2006-08-29 21:11:18 : <INIT> Detected settings file "E:\DriverPack\DPs_BASE.ini".

2006-08-29 21:11:18 : <INIT> CD di Windows 2000 Professional -  SP4 detected.

2006-08-29 21:11:18 : <INIT> The platform wnt5_x86-32_disc will be used (which is the 'disc' installation platform for the OS family 'wnt5_x86-32').

2006-08-29 21:11:18 : <INIT> Imported settings from settings file.

2006-08-29 21:11:19 : <INIT> Detected DriverPack Chipset 6.08!

2006-08-29 21:11:19 : <INIT> Detected DriverPack CPU 6.08!

2006-08-29 21:11:19 : <INIT> Detected DriverPack Graphics A 6.08!

2006-08-29 21:11:19 : <INIT> Detected DriverPack Graphics B 6.03!

2006-08-29 21:11:19 : <INIT> Detected DriverPack Graphics C 6.03!

2006-08-29 21:11:19 : <INIT> Detected DriverPack LAN 6.08!

2006-08-29 21:11:19 : <INIT> Detected DriverPack MassStorage 6.08!

2006-08-29 21:11:19 : <INIT> Detected DriverPack Sound A 6.08!

2006-08-29 21:11:19 : <INIT> Detected DriverPack Sound B 6.08!

2006-08-29 21:11:19 : <INIT> Detected DriverPack WLAN 6.08!

2006-08-29 21:11:19 : <INIT> Detected 3rd party DriverPack(s).

2006-08-29 21:11:19 : <INIT> DriverPacks scanned sucessfully.

2006-08-29 21:11:19 : <GUI>  Initialized GUI.

2006-08-29 21:11:19 : <GUI>  Created a list of all available language files.

2006-08-29 21:11:19 : <GUI>  Set the last used language, English, as the GUI language.

2006-08-29 21:11:47 : <GUI>  Refreshed UpdateChecker with success.

2006-08-29 21:18:48 : <GUI>  Refreshed UpdateChecker with success.

2006-08-29 21:26:53 : <GUI>  Saved settings!

2006-08-29 21:26:53 : <GUI>  Closed GUI.

2006-08-29 21:26:53 : <SEL>  Selected module: mod_slip_w2k_x86-32_disc_m2.

2006-08-29 21:26:58 : <PREP> Removed all attributes from \I386.

2006-08-29 21:26:58 : <PREP> Deleted old DriverPacks.

2006-08-29 21:26:58 : <PREP> Deleted old method 2 related files.

2006-08-29 21:26:58 : <PREP> Restored original mass storage text mode driver adpu160m.sys.

2006-08-29 21:26:58 : <PREP> Restored original mass storage text mode driver dac960nt.sys.

2006-08-29 21:26:58 : <PREP> Restored original mass storage text mode driver ipsraidn.sys.

2006-08-29 21:26:58 : <PREP> Deleted old DriverPack MassStorage text mode drivers.

2006-08-29 21:27:00 : <PREP> Cleaned up \I386\svcpack.inf.

2006-08-29 21:27:00 : <PREP> Unslipstreamed KB888111.

2006-08-29 21:27:00 : <PREP> Restored \I386\winnt.sif.

2006-08-29 21:27:00 : <PREP> Restored \I386\txtsetup.sif.

2006-08-29 21:27:00 : <PREP> Restored \I386\dosnet.inf.

2006-08-29 21:27:00 : <PREP> Restored original setup: method 2 was used previously.

2006-08-29 21:27:00 : <PREP> Created temporary working directory.

2006-08-29 21:27:00 : <SLIP> Extracted necessary files for method 2.

2006-08-29 21:27:00 : <SLIP> Created necessary directory structure for method 2.

2006-08-29 21:27:00 : <SLIP> Copied files necessary for method 2.

2006-08-29 21:28:16 : <SLIP> Copied DriverPacks to \OEM.

2006-08-29 21:28:17 : <SLIP> Extracted and deleted \I386\svcpack.in_.

2006-08-29 21:28:17 : <SLIP> Updated \I386\svcpack.inf file to support KB888111.

2006-08-29 21:28:20 : <SLIP> Updated \I386\txtsetup.sif file to support KB888111.

2006-08-29 21:28:22 : <SLIP> Updated \I386\dosnet.inf file to support KB888111.

2006-08-29 21:28:22 : <SLIP> QuickStream Cache available for DriverPack MassStorage text mode drivers!

2006-08-29 21:28:24 : <SLIP> Slipstreamed DP MassStorage text mode drivers using QuickStream Cache.

2006-08-29 21:28:30 : <SLIP> Removed entries from \I386\txtsetup.sif that will be updated.

2006-08-29 21:28:31 : <SLIP> Removed entries from \I386\dosnet.inf that will be updated.

2006-08-29 21:29:07 : <SLIP> Updated \I386\dosnet.inf and \I386\txtsetup.sif to support DP MassStorage text mode drivers.

2006-08-29 21:29:08 : <SLIP> Compressed setup.exe to SETUP.EX_.

2006-08-29 21:29:08 : <SLIP> Deleted old presetup.cmd file from \I386.

2006-08-29 21:29:08 : <SLIP> Created \I386\presetup.cmd file.

2006-08-29 21:29:08 : <SLIP> Updated \I386\txtsetup.sif to support method 2.

2006-08-29 21:29:08 : <SLIP> Updated \I386\dosnet.inf to support method 2.

2006-08-29 21:29:08 : <SLIP> Updated \I386\winnt.sif to support method 2.

2006-08-29 21:29:08 : <SLIP> Updated DPsFnshr.ini to disable KTD.

2006-08-29 21:29:08 : <SLIP> Updated \I386\winnt.sif's GUIRunOnce section.

2006-08-29 21:29:08 : <SLIP> Slipstream finished in 2 minutes and 15 seconds.

2006-08-29 21:29:12 : <CLNP> Temporary working directory successfully deleted.

2006-08-29 21:29:12 : Program terminated.
  • From: Hasselt, Belgium
  • Registered: 2006-05-26
  • Posts: 2,609

Re: [CLOSED] W2K: Promise SATA 378 not detected during text mode setup

Everything looks fine. It should be working. I'll wait for your new test results.

EDIT:
Note that MANY drivers are commented in the SCSI.Load section and therefore will not be loaded. This is due to the fact that Windows 2000 seems to have a 'maximum combined size of all text mode drivers'-limit. But the drivers you need for your controllers are however NOT commented. So they should work just fine...

Founder of DriverPacks.net — wimleers.com

Wim Leers's Website

  • Registered: 2006-05-31
  • Posts: 36

Re: [CLOSED] W2K: Promise SATA 378 not detected during text mode setup

ty
creating the dvd
i think that in 20 minutes i can say something

  • Registered: 2006-05-31
  • Posts: 36

Re: [CLOSED] W2K: Promise SATA 378 not detected during text mode setup

i see only the pata connected hd
(boot from dvd, i have no pressed the f6 to load external driver, and return for install the so: there i see only the 2 pata hds)

Last edited by Toblerone (2006-08-30 07:26:04)

  • Registered: 2006-05-31
  • Posts: 36

Re: [CLOSED] W2K: Promise SATA 378 not detected during text mode setup

controller:
VIA K8T800Pro chipset
Promise 20378 controller setup like NOT raid in the bios

  • Registered: 2006-05-31
  • Posts: 36

Re: [CLOSED] W2K: Promise SATA 378 not detected during text mode setup

some1 can try if the problem is for all or only for me and my devices?

  • From: Hasselt, Belgium
  • Registered: 2006-05-26
  • Posts: 2,609

Re: [CLOSED] W2K: Promise SATA 378 not detected during text mode setup

Support continued in your other topic, with basically the same problem. But because that test is with Windows XP, the tracking of the cause is easier.

Topic closed.

Founder of DriverPacks.net — wimleers.com

Wim Leers's Website