Topic: [IMPL] Areca arc-1210
Hi,
I'm having a problems with the ARC-1210 raid controller from Areca.
I'm using the most recent version of the driverpacks, the the driverpack base program and an official Windows XP SP3 disk.
Slipstreaming the drivers (including "MassStorage text mode") worked without an error message
The raid-array was configured correctly in the raid controllers bios.
When starting a Debian setup the raid controller and the prepared volume are immediately recognized, so I'm sure the raid array has been configured correctly.
The DVD I've created works on a lot of different hardware not supported by the regular XP setup, but the RAID controller is not recognized. When I try to install on a raid volume the windows setup complains that it could not find any harddisks
This is the HWID form the same card as can be found when the card is plugged into a working XP box: (dumped by devcon.exe)
PCI\VEN_17D3&DEV_1210&SUBSYS_121017D3&REV_00\5&1A1496A7&0&700080
Name: RAID Controller
Hardware ID's:
PCI\VEN_17D3&DEV_1210&SUBSYS_121017D3&REV_00
PCI\VEN_17D3&DEV_1210&SUBSYS_121017D3
PCI\VEN_17D3&DEV_1210&CC_010400
PCI\VEN_17D3&DEV_1210&CC_0104
Compatible ID's:
PCI\VEN_17D3&DEV_1210&REV_00
PCI\VEN_17D3&DEV_1210
PCI\VEN_17D3&CC_010400
PCI\VEN_17D3&CC_0104
PCI\VEN_17D3
PCI\CC_010400
PCI\CC_0104
Who can point me in the right direction?
As most workstations and servers come without floppydrives these days (and a usb floppy doesn't allways work to insert the driver in textbased mode), I'd be really happy to get it working