• Registered: 2009-02-21
  • Posts: 1

Topic: Using DPSBase to remove drivers

I need to remove the RAID and SATA drivers from a Windows boot DVD, and I was told that I can use DPSBase to do that.  I've experimented with DPSBase and can see how to use it to add driver packs.  But how can I use it to remove drivers?  The first part of the problem is identifying the drivers that I want to remove.

  • From: Cambridgeshire, UK
  • Registered: 2007-01-27
  • Posts: 6,226

Re: Using DPSBase to remove drivers

Easy.
1) Run DriverPacks BASE and select your source folder.
2) Click the right arrow until you get to the DriverPacks selection screen.
3) Click "select none"
4) Click "slipstream"

That's it.  Your DriverPacks are now removed from your source and your source was placed back to the state it was in prior to DriverPacks integration.

Read BEFORE you post.  HWID tool   DriverPacks Tutorial   DONATE!
http://driverpacks.net/userbar/admin-1.png
Not all heroes wear capes, some wear Kevlar!
  • OverFlow
  • DriverPacks Administrator & BASE Developer
  • Offline
  • From: Cincinnati
  • Registered: 2006-12-02
  • Posts: 6,730

Re: Using DPSBase to remove drivers

Just to be clear DriverPacks BASE will only remove Mass Storage drivers that were added by DriverPacks BASE
and only if you did not make any changes after you integrated DriverPack MassStorage

I hope that helps!

PS other drivers may be removed manually by editing the txtsetup.sif and dosnet.inf
Do this at your own peril wink there is a wealth of useful info at msfn if you need help with that

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

OverFlow's Website