Topic: ICH10R and Windows 2000
It appears as if the latest F6 drivers are not available for Windows 2000, the XP version says it is corrupted during install.
Just an FYI.
Stu
You are not logged in. Please login or register.
It appears as if the latest F6 drivers are not available for Windows 2000, the XP version says it is corrupted during install.
Just an FYI.
Stu
Which file? I was getting corrupted file ahci7xx with the 811B pack, then I tried 810F, but was getting again some errors; after removing all references to ahci7xx in dosnet/txtsetup files, I started getting not enough memory to load ntfs.sys, after removing references to ahci6xx as well the problem was gone.
not enough memory to load ntfs is an error generated by trying to load too many drivers at one time...
if you enable a driver for win2k then you must disable at least one other...
(useing the mass storage INI setting disable if OS = )
either Jake missed adding the tag... or you enabled one that was disabled
My bad. I should have said - INTEL - appears to have dropped support for Windows 2000 & Server 2000 from their ICH10R drivers.
Sorry for the confusion.
Last edited by BigBrit (2008-11-15 03:12:25)
OK, that is fixable too...
we ended up disabling the raid mode in bios (using ide bios setting) and having daily manual backup from one disk to another...
That makes sense... stay tuned for our next packs... we will have this resolved soon
Thanks for getting back to us
Powered by PunBB, supported by Informer Technologies, Inc.
Currently installed 3 official extensions. Copyright © 2003–2009 PunBB.
[ Generated in 0.021 seconds, 10 queries executed ]