• Jaak
  • Old Timer Rookie
  • Offline
  • From: Eeklo, in the East Flanders
  • Registered: 2006-07-23
  • Posts: 3,594

Re: [PROB] MassStorage 8.05 /N/5 nForce590SLI chipset UBCD V3.20

Hi,
I don't know if it will, and say that not only because I have not had Nvidia chipset moboes in-house for quite a bit of time, but also because I (when I have the hardware) I do not always find the time to test all variations and methods, and I (personally) usually try disc based install in live metal.

So, in other words, I do not often run tests for ubcd4win, and (to be brutally honest) when I don't have the suitable hardware, a test I do on an issue about hardware I don't have it is of little use.

However, you are helping us glue together some facts about nvidia, and any workaround is better than none.
Thanks.

I must now ask that people whom CAN truly test PE and UBCD4WIN on nVidia platforms take a look at what causes the issue, and at this workaround.
I know that we do not cover all nVidia controllers because there is a problem in the INF files.
To explain; when I look at all the downloads I see where some section is duped, but another is not completely duped, so I had to make a choice and completely left out one mass storage driver because I see no other way. We are therefore actually missing a driver.
((I did not dare put its HWID into another.))

OK, big deal?
nVidia once had a few support folders in DriverPack MassStorage, and we added some in the last fourteen months, and frankly, it was a uphill battle since.
sad

Last edited by Jaak (2008-09-19 11:01:13)

The answer was 42?
Kind regards, Jaak.
  • Jaak
  • Old Timer Rookie
  • Offline
  • From: Eeklo, in the East Flanders
  • Registered: 2006-07-23
  • Posts: 3,594

Re: [PROB] MassStorage 8.05 /N/5 nForce590SLI chipset UBCD V3.20

are we still in this situation?

Question 1; adapted 805 with ms_2_hwids="=" (with jeff's string) worked.
Q2; 805 with ms_2_hwids=" (with jeff's string) didn't work.
Q3; 809C (which had corrected string, aka Q2, in it) did not work?

Q4; And 805 with the ubcd4win forum workaround works?

The answer was 42?
Kind regards, Jaak.
  • Jaak
  • Old Timer Rookie
  • Offline
  • From: Eeklo, in the East Flanders
  • Registered: 2006-07-23
  • Posts: 3,594

Re: [PROB] MassStorage 8.05 /N/5 nForce590SLI chipset UBCD V3.20

Question to Jeff
Could the "="=" have nulled that entire driver?

The answer was 42?
Kind regards, Jaak.
  • MrMorse
  • DriverPacks newbie
  • Offline
  • From: Germany
  • Registered: 2008-08-21
  • Posts: 12

Re: [PROB] MassStorage 8.05 /N/5 nForce590SLI chipset UBCD V3.20

Jaak wrote:

are we still in this situation?

Question 1; adapted 805 with ms_2_hwids="=" (with jeff's string) worked.
Q2; 805 with ms_2_hwids=" (with jeff's string) didn't work.
Q3; 809C (which had corrected string, aka Q2, in it) did not work?

Q4; And 805 with the ubcd4win forum workaround works?

Q1: yes
Q2: right
Q3: right
Q4: yes

We have exactly the situation you describe.

  • OverFlow
  • DriverPacks Administrator & BASE Developer
  • Offline
  • From: Cincinnati
  • Registered: 2006-12-02
  • Posts: 6,730

Re: [PROB] MassStorage 8.05 /N/5 nForce590SLI chipset UBCD V3.20

Jaak wrote:

Question to Jeff
Could the "="=" have nulled that entire driver?

I belive so, yes.  It probably tried to match the = sign as a HWID. lol

which means that it picked up on another hwid from another section...?

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

OverFlow's Website