[PROB] MassStorage 8.05 /N/5 nForce590SLI chipset UBCD V3.20 (Page 1 of 2)

Hello OverFlow,

Thank you for this polite reception.

Yes, I posted the HWIDs in the UBCD-Forum.

Here they are for the chipset 590:

Mainboard "Abit AN9 32X" chipset nForce590SLI.

Command "devcon.exe hwids *CC_01* *Raid* *CC_02*" gives following result:

ACPI\NVRAIDBUS\3&2411E6FE&0
Name: NVIDIA nForceâ„¢ RAID Class Controller
Hardware ID's:
ACPI\NVRAIDBUS
*NVRAIDBUS
PCI\VEN_1095&DEV_3132&SUBSYS_31321095&REV_01\4&2C6EB151&0&0010
Name: Massenspeichercontroller
Hardware ID's:
PCI\VEN_1095&DEV_3132&SUBSYS_31321095&REV_01
PCI\VEN_1095&DEV_3132&SUBSYS_31321095
PCI\VEN_1095&DEV_3132&CC_018000
PCI\VEN_1095&DEV_3132&CC_0180
Compatible ID's:
PCI\VEN_1095&DEV_3132&REV_01
PCI\VEN_1095&DEV_3132
PCI\VEN_1095&CC_018000
PCI\VEN_1095&CC_0180
PCI\VEN_1095
PCI\CC_018000
PCI\CC_0180
PCI\VEN_10DE&DEV_036E&SUBSYS_1C22147B&REV_A1\3&2411E6FE&0&60
Name: Standard-Zweikanal-PCI-IDE-Controller
Hardware ID's:
PCI\VEN_10DE&DEV_036E&SUBSYS_1C22147B&REV_A1
PCI\VEN_10DE&DEV_036E&SUBSYS_1C22147B
PCI\VEN_10DE&DEV_036E&CC_01018A
PCI\VEN_10DE&DEV_036E&CC_0101
Compatible ID's:
PCI\VEN_10DE&DEV_036E&REV_A1
PCI\VEN_10DE&DEV_036E
PCI\VEN_10DE&CC_01018A
PCI\VEN_10DE&CC_0101
PCI\VEN_10DE
PCI\CC_01018A
PCI\CC_0101
PCI\VEN_10DE&DEV_037F&SUBSYS_1C22147B&REV_A2\3&2411E6FE&0&68
Name: NVIDIA MCP55 Serial ATA Controller
Hardware ID's:
PCI\VEN_10DE&DEV_037F&SUBSYS_1C22147B&REV_A2
PCI\VEN_10DE&DEV_037F&SUBSYS_1C22147B
PCI\VEN_10DE&DEV_037F&CC_010485
PCI\VEN_10DE&DEV_037F&CC_0104
Compatible ID's:
PCI\VEN_10DE&DEV_037F&REV_A2
PCI\VEN_10DE&DEV_037F
PCI\VEN_10DE&CC_010485
PCI\VEN_10DE&CC_0104
PCI\VEN_10DE
PCI\CC_010485
PCI\CC_0104
PCI\VEN_10DE&DEV_037F&SUBSYS_1C22147B&REV_A2\3&2411E6FE&0&69
Name: NVIDIA MCP55 Serial ATA Controller
Hardware ID's:
PCI\VEN_10DE&DEV_037F&SUBSYS_1C22147B&REV_A2
PCI\VEN_10DE&DEV_037F&SUBSYS_1C22147B
PCI\VEN_10DE&DEV_037F&CC_010485
PCI\VEN_10DE&DEV_037F&CC_0104
Compatible ID's:
PCI\VEN_10DE&DEV_037F&REV_A2
PCI\VEN_10DE&DEV_037F
PCI\VEN_10DE&CC_010485
PCI\VEN_10DE&CC_0104
PCI\VEN_10DE
PCI\CC_010485
PCI\CC_0104
PCI\VEN_10DE&DEV_037F&SUBSYS_1C22147B&REV_A2\3&2411E6FE&0&6A
Name: NVIDIA MCP55 Serial ATA Controller
Hardware ID's:
PCI\VEN_10DE&DEV_037F&SUBSYS_1C22147B&REV_A2
PCI\VEN_10DE&DEV_037F&SUBSYS_1C22147B
PCI\VEN_10DE&DEV_037F&CC_010485
PCI\VEN_10DE&DEV_037F&CC_0104
Compatible ID's:
PCI\VEN_10DE&DEV_037F&REV_A2
PCI\VEN_10DE&DEV_037F
PCI\VEN_10DE&CC_010485
PCI\VEN_10DE&CC_0104
PCI\VEN_10DE
PCI\CC_010485
PCI\CC_0104
6 matching device(s) found.

Rats, NV again.

If the silicon hyll battle left us bleeding, what do we say about NV.
The twenty odd download links at LAN is getting us No Volunteers.
(the topic is in lan, but the download links in there.. They all have mass storage drivers.)

in mass, the big problem is that they use and have PCI AND SCSI lines with dupes, and I had to leave out a driver because I don't know how to add one that has a unique PCI hwid with a duplicated SCSI line.

I use the OnBoard-controller of the mainboard "Abit AN9 32x" (there is only one revision).

The hdds are running in IDE-mode, called "Native IDE" in bios.

I'm appreciated about the quick reply

regards
MM

On my MB are two sets of SATA connectors:

1. SATA1-SATA6
These use the "Southbridge: NVIDIA® MCP55PXE Chipset".
My hdds are connected to SATA1, SATA3, SATA5.

2. SATA7 and eSATA
They use the Sil3132-chip.
I have no devices connected there.

Upon further research i notice that

PCI\VEN_10DE&DEV_037F&CC_0104

Is not supported by the  D\M\N\5\NVGTS5.inf - which is the INF for "nvgts5.sys"
It lists:

PCI\VEN_10DE&DEV_037F&CC_0101
PCI\VEN_10DE&DEV_0054&CC_0101
PCI\VEN_10DE&DEV_0055&CC_0101
PCI\VEN_10DE&DEV_044D&CC_0106

NOW... D\M\N\5\NVRD325.inf Does list your HWID! (somebody goofed) LOL

So if you could test this for me!!!!

extract the driverpack from

UBCD4Win320\plugin\DriverPacks.net\BASE\DriverPacks\DP_MassStorage_wnt5_x86-32_805.7z

to \DriverPacks\DP_MassStorage_wnt5_x86-32_805

and rename the folder to \DriverPacks\DP_MassStorage_wnt5_x86-32_806

edit  DriverPacks\DP_MassStorage_wnt5_x86-32_806\DriverPack_MassStorage_wnt5_x86-32.ini

replace the section [N-5]  with the section below

[N-5]
ms_count=2
ms_1_deviceName="NVIDIA nForce 520 RAID/AHCI Controller"
ms_1_tag="nvgts5"
ms_1_sysFile="nvgts5.sys"
ms_1_hwids="PCI\VEN_10DE&DEV_037F&CC_0101,PCI\VEN_10DE&DEV_0054&CC_0101,PCI\VEN_10DE&DEV_0055&CC_0101,PCI\VEN_10DE&DEV_044C&CC_0101,PCI\VEN_10DE&DEV_044D&CC_0106"
ms_1_isBusExtender=false
ms_1_exc_disableIfOS="w2k"
ms_2_deviceName="NVIDIA nForce RAID"
ms_2_tag="nvrd325"
ms_2_sysFile="nvrd325.sys"
ms_2_hwids="="PCI\VEN_10DE&DEV_037F&CC_0104,PCI\VEN_10DE&DEV_0054&CC_0104,PCI\VEN_10DE&DEV_0055&CC_0104,PCI\VEN_10DE&DEV_044C&CC_0104,SCSI\NVIDIA__Raid_Disk________,SCSI\__NVIDIA_______Raid_Disk,SCSI\NVIDIA__Raid_Disk_20_____,SCSI\__NVIDIA____Raid_Disk_20,*NVRAID20"
ms_2_isBusExtender=false
ms_2_exc_disableIfOS="w2k"

7zip to DP_MassStorage_wnt5_x86-32_806.7z (should default to this name)
base will see this as a newer version and use it automaticaly (you can leave 805 there)

from pebuilder go to the plugins page and select base and hit the config button...
ensure the new mass is there and enabled (hit 'refresh')

Build a disk and report back - I think your fixed... !!!

A team member may put up a test pack if we wait... up to you!

have a great day and thanks for reporting!

jeff

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!

The DriverPacks, the DP_Base program, and Support Forum are FREE!.

Thank you for bumping this topic perhaps the team will pick it up and verify the typo and update the nightlies.

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!

The DriverPacks, the DP_Base program, and Support Forum are FREE!.

hi

the code has an error

ms_2_hwids="="

mass 809C is up for tests.

via [v1] commented
[NV-5] original commented and jeff's adaptation included

built on 809A I found in nightlies.
(( I had a "B" test here. on older Via.))

go find it.

So, it's not solved then or what?
Shall I revert the edit of the thread title?

Coming up next - useful links:
• If you like this project, please support it with your donation!      • Grab your HW info (HWIDs) here!     
• If you are a newbie, be sure to check out the DriverPacks tutorial!     • Here's how to create your own DP!

Hello together,

hm, I don't know how I start my explanation...**confused**

It's NOT solved...

OK, What I have done today:

I take the DriverPack_MassStorage_wnt5_x86-32.ini and correct the typo.
I applied the new driver pack as required.

I build a new ISO and start my PC with the chipset 590SLI.
And...I don't see my hdds (like in my first post).

Did I made a mistake?

To clarify that I install UBCD V3.20 in a new folder.

Test1:
- Unzip the "DP_MassStorage_wnt5_x86-32_805.7z"
- Correct "DriverPack_MassStorage_wnt5_x86-32.ini" like in post #11
- I leave the typo in it (like original)
- I zip the folder according to the description to a file "DP_MassStorage_wnt5_x86-32_806.7z"
- I delete file "DP_MassStorage_wnt5_x86-32_805.7z" from "D:\UBCD4Win\plugin\DriverPacks.net\BASE\DriverPacks"
- I copy "DP_MassStorage_wnt5_x86-32_806.7z" to "D:\UBCD4Win\plugin\DriverPacks.net\BASE\DriverPacks"
- I 'renew' the drivers according to the description
I build the ISO and burn it
==> Starting with CD works ok and I can see all my HDDs

Test2:
I do the same like above (yes, a new installation of UBCD V3.20)
BUT: Now I correct the typo (to "ms_2_hwids="PCI\....")
and build a new ISO.
After burning on CD and restart my PC The HDDs are not displayed !!!

Amazing. Incredible...

The typo HAS an impact to the functionality with nForce590SLI.

So, now you have the ball

Last edited by MrMorse (2008-09-10 08:30:07)

Hello OverFlow,

I had tried 809c before. It failed.
I thought you was not really ready with 809c.

That was the reason that I tried the original 805 with your new N5-section WITH a typo correction (the result made me crazy ).

BUT:
Because yesterday I have tried a lot of combinations and I have no protocol to review my doing thoroughly I want to test once more with 809c to be completely sure.

I'll post my result asap.