• jihefa
  • DriverPacks newbie
  • Offline
  • Registered: 2008-03-10
  • Posts: 3

Topic: looking for driver

Hello,

Thanks for your support and the good tools provided.
I am a UBCD4WIN user and got into trouble with (I suppose) SATA hard drives.
According to UBCD4WIN team, most drives are now supported but in case one would not be you are the preferred place to ask for.
I tried to look at the detailed list but was unsure of the result.
Can you tell me if the following configuration is supported ?
Thanks a lot
/JF

Computer info:
   motherboard : Intel D946GZIS
   Chipset : Intel i946GZ
   Processor : Intel Pentium D 915 @ 2800 MHz
   physical memory : 2048 Mo (2 x 1024 DDR2-SDRAM )
   graphical card : Intel Corporation 946GZ/GL Integrated Graphics Controller
   Hard disk : SAMSUNG (80 Go)
   DVD-Rom : TSSTcorp CD/DVDW SH-S182D
   Network card : Intel Corporation PRO/100 VE Network Connection
   OS : Microsoft Windows XP home edition Service Pack 2
   DirectX : Version 9.0c

Hard disk info SAMSUNG HD080HJ
     IDE controller : 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller
     Canal IDE : #1  -  Lecteur Maître
     Model : SAMSUNG HD080HJ
     Serial number : S08EJ1SP306799
     Revision : ZH100-47
     Serial ATA : Yes
     Serial ATA version : 2.0
     Support : ATA/ATAPI-7
     Size : 80 Go
     Cache : 8 192 Ko
     ECC size : 4
     Multiple Sector : 16
     IORDY : Yes
     LBA Mode : Yes
     DMA Mode : Yes
     NCQ Mode : Yes
     Multiword DMA Mode : 2
     PIO Mode : PIO 4
     UDMA Mode max. : 6 (ATA-133)
     UDMA Mode Activated : 5 (ATA-100)
     SMART : yes - activated
     Power Management : yes
     Acoustic Management : yes
     Security Mode : yes
     Write Cache : yes
     48-bit Address : yes

  • Jaak
  • Old Timer Rookie
  • Offline
  • From: Eeklo, in the East Flanders
  • Registered: 2006-07-23
  • Posts: 3,594

Re: looking for driver

Hi
maybe you did something wrong.
This is our plugin build tute, by overFlow.
http://users.pandora.be/jtdoom/basetute … lpFile.htm

We provide a tool to collect hardware IDs.
When I look at your description I think your hardware is supported, but you could post the HWID tool output just the same.. (HWIDs of the machine you cannot use UBCD4WIN on.)

I welcome you with something experimental as well.
We call it a TESTPACK.
This may work better than the current released pack (8021).
http://dev.driverpacks.thesneaky.com/dr … 32_803C.7z

The answer was 42?
Kind regards, Jaak.
  • jihefa
  • DriverPacks newbie
  • Offline
  • Registered: 2008-03-10
  • Posts: 3

Re: looking for driver

Thanks for your quick answer, we will try to investigate as told and let you know anyhow.
/JF

  • OverFlow
  • DriverPacks Administrator & BASE Developer
  • Offline
  • From: Cincinnati
  • Registered: 2006-12-02
  • Posts: 6,730

Re: looking for driver

moved to ubcd4win forum

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

OverFlow's Website

  • jihefa
  • DriverPacks newbie
  • Offline
  • Registered: 2008-03-10
  • Posts: 3

Re: looking for driver

Hello,
My problem had nothing to do with the drivers pack. The disk contained errors that prevented UBCD4WIN to run properly. After scanning it and reparing it (with the traditional Windows tools), the disk was again ok.
Thanks anyhow for your support.
/JF

  • OverFlow
  • DriverPacks Administrator & BASE Developer
  • Offline
  • From: Cincinnati
  • Registered: 2006-12-02
  • Posts: 6,730

Re: looking for driver

Thanks for letting us know...

Always glad to help. feel free to ask.

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

OverFlow's Website