Topic: [Rel] DP Compaq Presario C710ED SATA Driver

Sata drivers for Compaq Presario C710ED
Press F6 during booting xp installation.

MD5 Hash: 3C177AA01B738B12DF27918D1D1C7F0F
Decompressed Size: 339 KB (347,465 bytes) MB
Compressed Size: 151 KB (154,663 bytes) MB

Download DP Compaq Presario C710ED Sata Drivers:

Last edited by utcollector (2008-02-04 13:04:32)

Re: [Rel] DP Compaq Presario C710ED SATA Driver

please read the read before you post in my sig.

and provide your DPs_BASE.log DPs_BASE.ini

Based on your other post i belive you don't even use DriverPacks base to slipstream the drivers so we can't help you.

This post for mass storage is in the wrong forum and i blelive this driver is already in the packs.

grrr

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

Re: [Rel] DP Compaq Presario C710ED SATA Driver

OverFlow wrote:

please read the read before you post in my sig.

and provide your DPs_BASE.log DPs_BASE.ini

Based on your other post i belive you don't even use DriverPacks base to slipstream the drivers so we can't help you.

This post for mass storage is in the wrong forum and i blelive this driver is already in the packs.

grrr

Hi, I finally found the "read the read" I will post the log and ini. next time. I do use DriverPacks base now.

My mass storage Dp is in the right forum. It only got the few needed files to make it work on the notebook. My 3rd DP is alsow much smaller than the official mass storage DP

Re: [Rel] DP Compaq Presario C710ED SATA Driver

utcollector wrote:

My mass storage Dp is in the right forum. It only got the few needed files to make it work on the notebook. My 3rd DP is alsow much smaller than the official mass storage DP

Really, no surprise here, you only support one single piece of system while the DriverPacks support thousands of them!

It doesn't take that much to figure out it may take a little bit more of space to achieve that goal, huh? wink

That said, the DPMS is far from being considered big in these times...

Re: [Rel] DP Compaq Presario C710ED SATA Driver

i cant imagine it works. since it is not in the mass storage pack it would not be sliptreamed in for use in text mode so the SATA HDD would not be visible to partition and format. Oh well as long as they are happy.

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

Re: [Rel] DP Compaq Presario C710ED SATA Driver

Hi
merry Xmass.
your link is bust up.
UBB code tag it
(url=link)txt(/url)
(do it with with square brackets)

they tell you truth.
you could drop anything in third party, and it wil never be used for txtmode

it might get used during PnP (base will copy this to be used for PnP only if it uses a proper DriverPacks name.)

Last edited by Jaak (2007-12-25 17:04:44)

The answer was 42?
Kind regards, Jaak.

Re: [Rel] DP Compaq Presario C710ED SATA Driver

LOL

@ helmi
4.8 megabyte of weirdiness with 1532 unique hardware IDs not supportd by windows setup.
Five lines with 24 HWIDs in it can make us spend days of testing with no result.

read learning pains.

Last edited by Jaak (2007-12-25 17:18:01)

The answer was 42?
Kind regards, Jaak.

Re: [Rel] DP Compaq Presario C710ED SATA Driver

Helmi wrote:
utcollector wrote:

My mass storage Dp is in the right forum. It only got the few needed files to make it work on the notebook. My 3rd DP is alsow much smaller than the official mass storage DP

Really, no surprise here, you only support one single piece of system while the DriverPacks support thousands of them!

It doesn't take that much to figure out it may take a little bit more of space to achieve that goal, huh? wink

That said, the DPMS is far from being considered big in these times...

Did you ever hear of costum made? Well i like to make costum made xp cd's. I the case of my laptop i only took the drivers i needed. Things i have in mind are slimming down in every way thats easy for me. Alsow cutting down install time a bit.

Its a amazing thing the official DP can support thousends of hardware pieces. Goodwork! I personally dont have the time to help with the DP's. I'm sorry about that.

Re: [Rel] DP Compaq Presario C710ED SATA Driver

OverFlow wrote:

i cant imagine it works. since it is not in the mass storage pack it would not be sliptreamed in for use in text mode so the SATA HDD would not be visible to partition and format. Oh well as long as they are happy.

Well i got it to work. I hit F6 and got the change to pick the right file. The information slipstreamed for use in text mode is going pritty fast but it went just like with the official mass starage DP. (My sata driver is alsow in the official pack) I alsow used the $OEM$ folder option. That only fully worked after using the options of dps_base.exe

Re: [Rel] DP Compaq Presario C710ED SATA Driver

If you use mass storage text mode support you don't have to hit f6...

As Isaid 3rd party DriverPack doesn't work for text mode support (and is why you have to hit f6)

that is why we have the mass storage textmode feature.
it's only 28 meg and supports over a thousand HDD controller types.
That means never haveing to hit f6 ever again...

PS if you insist that this is still to big the mass storage pack can be modified (yes we have heard of custom made)
see this thread for details. http://forum.driverpacks.net/viewtopic. … 356#p17356

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

Re: [Rel] DP Compaq Presario C710ED SATA Driver

I got build myself a minipc and tested again my sata driverpack. (It needed the same sata driver) I didn't need to press F6 ad all:D

My (1 device) small sata driver will be added to the oem folder. Driverpack Base will just write all sata info to the files. Sow 3rd party masstore dp will work. I did with DPs_BASE_7052 Still need to test with: DPs_BASE_801RC2

Here is the overview of settings i used:

DriverPack method: 2
Finisher methode: RunOnceEx (default)
Driverpacks: 3rd party

Optional settings:
KTD: disabled
QuickStrean Cache: No



OverFlow wrote:

If you use mass storage text mode support you don't have to hit f6...

As Isaid 3rd party DriverPack doesn't work for text mode support (and is why you have to hit f6)

that is why we have the mass storage textmode feature.
it's only 28 meg and supports over a thousand HDD controller types.
That means never haveing to hit f6 ever again...

PS if you insist that this is still to big the mass storage pack can be modified (yes we have heard of custom made)
see this thread for details. http://forum.driverpacks.net/viewtopic. … 356#p17356

Re: [Rel] DP Compaq Presario C710ED SATA Driver

please post your
DPs_BASE.ini
DPs_BASE.log

and HWID for the mass storage on your mini-PC

I am quite certain that textmode drivers are not added from a 3rd party DriverPack

TIA

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

Re: [Rel] DP Compaq Presario C710ED SATA Driver

Oke here they are:

DPs_BASE.log:

2008-03-09 14:58:08 : <INIT> DriverPacks BASE 7.05.2 initialized.
2008-03-09 14:58:08 : <INIT> Host environment: WIN_XP Service Pack 2 on X86 CPU.
2008-03-09 14:58:08 : <INIT> Created temporary working directory.
2008-03-09 14:58:08 : <INIT> Imported proxy settings from Internet Explorer.
2008-03-09 14:58:08 : <INIT> Start scanning for DriverPacks for the wnt5_x86-32 platform.
2008-03-09 14:58:08 : <INIT>     Detected DriverPack Chipset 7.10.1!
2008-03-09 14:58:08 : <INIT>     Detected DriverPack CPU 7.04.1!
2008-03-09 14:58:08 : <INIT>     Detected DriverPack Graphics A 8.02!
2008-03-09 14:58:08 : <INIT>     Detected DriverPack Graphics B 7.12.1!
2008-03-09 14:58:08 : <INIT>     Detected DriverPack Graphics C 7.09.1!
2008-03-09 14:58:08 : <INIT>     Detected DriverPack LAN 8.02.1!
2008-03-09 14:58:08 : <INIT>     Detected DriverPack MassStorage 8.02.1!
2008-03-09 14:58:08 : <INIT>     Detected DriverPack Sound A 8.02.1!
2008-03-09 14:58:08 : <INIT>     Detected DriverPack Sound B 7.10.1!
2008-03-09 14:58:08 : <INIT>     Detected DriverPack WLAN 8.02!
2008-03-09 14:58:08 : <INIT>     Detected 3rd party DriverPack(s).
2008-03-09 14:58:08 : <INIT>     Finished scanning.
2008-03-09 14:58:08 : <INIT> Detected settings file "U:\1 Nlite Stuff\1 Bâshrat the Sneaky Driverpacks\DPs_BASE_7052\DPs_BASE.ini".
2008-03-09 14:58:08 : <INIT> Windows XP Professional -  Retail SP2 detected.
2008-03-09 14:58:08 : <INIT> The platform wnt5_x86-32_disc will be used (which is the 'disc' installation platform for the OS family 'wnt5_x86-32').
2008-03-09 14:58:08 : <INIT> Imported settings from settings file.
2008-03-09 14:58:08 : <GUI>  Initialized GUI.
2008-03-09 14:58:08 : <GUI>  Created a list of all available language files.
2008-03-09 14:58:08 : <GUI>  Set the last used language, English, as the GUI language.
2008-03-09 14:58:13 : <GUI>  Windows XP Professional -  Retail SP2 detected.
2008-03-09 14:58:13 : <GUI>  The platform wnt5_x86-32_disc will be used (which is the 'disc' installation platform for the OS family 'wnt5_x86-32').
2008-03-09 14:58:43 : <GUI>  Saved settings!
2008-03-09 14:58:43 : <GUI>  Closed GUI.
2008-03-09 14:58:43 : <SEL>  Selected module: mod_slip_wxp_x86-32_disc_m2.
2008-03-09 14:58:48 : <PREP> Extracted DriverPack MassStorage to a temporary working directory.
2008-03-09 14:58:49 : <PREP> Removed all attributes from \I386.
2008-03-09 14:58:49 : <PREP> Created a backup of \I386\winnt.sif.
2008-03-09 14:58:49 : <PREP> Created a backup of \I386\txtsetup.sif.
2008-03-09 14:58:49 : <PREP> Created a backup of \I386\dosnet.inf.
2008-03-09 14:58:49 : <PREP> Cleaned up \$OEM$\cmdlines.txt.
2008-03-09 14:58:49 : <PREP> Deleted \$OEM$\ROE.exe.
2008-03-09 14:58:49 : <SLIP> Created necessary directory structure for method 2.
2008-03-09 14:58:50 : <SLIP> Copied files necessary for method 2.
2008-03-09 14:58:50 : <SLIP> Extracted files necessary for method 2.
2008-03-09 14:58:51 : <SLIP> Created \I386\presetup.cmd file.
2008-03-09 14:58:51 : <SLIP> Updated \I386\txtsetup.sif to support method 2.
2008-03-09 14:58:51 : <SLIP> Updated \I386\dosnet.inf to support method 2.
2008-03-09 14:58:51 : <SLIP> Copied DriverPacks to \OEM.
2008-03-09 14:59:08 : <SLIP> Slipstreamed DriverPack MassStorage text mode driver files.
2008-03-09 14:59:11 : <SLIP> Removed entries from \I386\txtsetup.sif that will be updated.
2008-03-09 14:59:11 : <SLIP> Removed entries from \I386\dosnet.inf that will be updated.
2008-03-09 14:59:39 : <SLIP> Updated \I386\dosnet.inf and \I386\txtsetup.sif to support DP MassStorage text mode drivers.
2008-03-09 14:59:39 : <SLIP> Updated \I386\winnt.sif to support method 2.
2008-03-09 14:59:39 : <SLIP> Updated DPsFnshr.ini to disable KTD.
2008-03-09 14:59:40 : <SLIP> Updated \$OEM$\cmdlines.txt to execute ROE.exe.
2008-03-09 14:59:40 : <SLIP> Slipstream finished in 57 seconds.
2008-03-09 14:59:41 : <CLNP> Temporary working directory successfully deleted.
2008-03-09 14:59:41 : Program terminated.

DPs_BASE.ini:

[General]
; preferred language
prefLang    = "English"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons    = "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI        = "yes"


[Settings]
; disc/bartpe/multibootDisc
instPlatform    = "disc"
; trailing backslash is allowed, but not necessary
location    = "R:\Xp MiniPc"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks    = "select"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod    = "2"
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod    = "RunOnceEx"


; you should only add this section if you've set [Settings]\finishMethod to "RunOnceEx"
[RunOnceExSettings]
; custom/default, if not specified: default
startID        = "default"


; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD        = "false"
; <path>, to specify a custom KTD cache location, if not specified: default (%SystemRoot%\DriverPacks)
KTDlocation    = "%SystemRoot%\DriverPacks"
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC        = "no"


; you should only add this section if you've set [Settings]\DriverPacks to "select"
[SelectDriverPacks]
DP_Chipset    = "no"
DP_CPU        = "no"
DP_Graphics_A    = "no"
DP_Graphics_B    = "no"
DP_Graphics_C    = "no"
DP_LAN        = "no"
DP_MassStorage    = "no"
DP_Sound_A    = "no"
DP_Sound_B    = "no"
DP_WLAN        = "no"
DPs_3rd_party    = "yes"
DP_MassStorage_textmode = "yes"


; this section is optional!
[OptionalSettingsOther]
; CCC/CCP, use ATI Catalyst Control Center or ATI Catalyst Control Panel (only relevant when slipstreaming DriverPack Graphics A)
ATI_cpl        = "CCC"

all hwids:

===========
PCI Devices
===========
PCI\VEN_11C1&DEV_5811&SUBSYS_030AA0A0&REV_61\4&22309365&0&18F0: OHCI Compliant IEEE 1394 Host Controller
PCI\VEN_8086&DEV_109A&SUBSYS_0606A0A0&REV_00\4&31C044A0&0&00E1: Intel(R) PRO/1000 PL Network Connection
PCI\VEN_8086&DEV_2448&SUBSYS_00000000&REV_E2\3&2411E6FE&0&F0: Intel(R) 82801 PCI Bridge - 2448
PCI\VEN_8086&DEV_27A0&SUBSYS_00000000&REV_03\3&2411E6FE&0&00: Mobile Intel(R) 945GM/GU/PM/GMS/940GML/943GML and Intel(R) 945GT Express Processor to DRAM Controller - 27A0
PCI\VEN_8086&DEV_27A2&SUBSYS_0606A0A0&REV_03\3&2411E6FE&0&10: Mobile Intel(R) 945 Express Chipset Family
PCI\VEN_8086&DEV_27A6&SUBSYS_0606A0A0&REV_03\3&2411E6FE&0&11: Mobile Intel(R) 945 Express Chipset Family
PCI\VEN_8086&DEV_27BD&SUBSYS_00000000&REV_02\3&2411E6FE&0&F8: PCI standard ISA bridge
PCI\VEN_8086&DEV_27C6&SUBSYS_27C4A0A0&REV_02\3&2411E6FE&0&FA: Intel(R) 82801GHM SATA RAID Controller
PCI\VEN_8086&DEV_27C8&SUBSYS_0606A0A0&REV_02\3&2411E6FE&0&E8: Standard Universal PCI to USB Host Controller
PCI\VEN_8086&DEV_27C9&SUBSYS_0606A0A0&REV_02\3&2411E6FE&0&E9: Standard Universal PCI to USB Host Controller
PCI\VEN_8086&DEV_27CA&SUBSYS_0606A0A0&REV_02\3&2411E6FE&0&EA: Standard Universal PCI to USB Host Controller
PCI\VEN_8086&DEV_27CB&SUBSYS_0606A0A0&REV_02\3&2411E6FE&0&EB: Standard Universal PCI to USB Host Controller
PCI\VEN_8086&DEV_27CC&SUBSYS_0606A0A0&REV_02\3&2411E6FE&0&EF: Standard Enhanced PCI to USB Host Controller
PCI\VEN_8086&DEV_27D0&SUBSYS_00000000&REV_02\3&2411E6FE&0&E0: PCI standard PCI-to-PCI bridge
PCI\VEN_8086&DEV_27D2&SUBSYS_00000000&REV_02\3&2411E6FE&0&E1: PCI standard PCI-to-PCI bridge
PCI\VEN_8086&DEV_27D8&SUBSYS_0606A0A0&REV_02\3&2411E6FE&0&D8: Microsoft UAA Bus Driver for High Definition Audio
PCI\VEN_8086&DEV_27DA&SUBSYS_0606A0A0&REV_02\3&2411E6FE&0&FB: Intel(R) 82801G (ICH7 Family) SMBus Controller - 27DA
PCI\VEN_8086&DEV_27DF&SUBSYS_0606A0A0&REV_02\3&2411E6FE&0&F9: Standard Dual Channel PCI IDE Controller
18 matching device(s) found.

===========
USB Devices
===========
USB\ROOT_HUB\4&21D2E3DB&0                                   : USB Root Hub
USB\ROOT_HUB\4&3308F51E&0                                   : USB Root Hub
USB\ROOT_HUB\4&4B7645A&0                                    : USB Root Hub
USB\ROOT_HUB\4&C639B68&0                                    : USB Root Hub
USB\ROOT_HUB20\4&3AAFE466&0                                 : USB Root Hub
USB\VID_0471&PID_0815\PH00STLU                              : eHome Infrared Receiver
USB\VID_04D9&PID_1400\5&14F0F7EA&0&2                        : USB Composite Device
USB\VID_04D9&PID_1400&MI_00\6&264F5928&0&0000               : USB Human Interface Device
USB\VID_04D9&PID_1400&MI_01\6&264F5928&0&0001               : USB Human Interface Device
USB\VID_058F&PID_9254\5&14F0F7EA&0&1                        : Generic USB Hub
USB\VID_1286&PID_1FAB\6&2DB1A08&0&4                         : 802.11g/b Wireless LAN Client Adapter - USB
11 matching device(s) found.

=============
Input Devices
=============
HID\VID_0471&PID_0815&COL01\7&22635B3F&0&0000               : HID-compliant device
HID\VID_0471&PID_0815&COL02\7&22635B3F&0&0001               : HID-compliant consumer control device
HID\VID_0471&PID_0815&COL03\7&22635B3F&0&0002               : HID-compliant device
HID\VID_0471&PID_0815&COL04\7&22635B3F&0&0003               : HID-compliant device
HID\VID_0471&PID_0815&COL05\7&22635B3F&0&0004               : Microsoft eHome Remote Control Keyboard keys
HID\VID_0471&PID_0815&COL06\7&22635B3F&0&0005               : Microsoft eHome MCIR Keyboard
HID\VID_0471&PID_0815&COL07\7&22635B3F&0&0006               : Microsoft eHome MCIR 109 Keyboard
HID\VID_0471&PID_0815&COL08\7&22635B3F&0&0007               : HID-compliant mouse
HID\VID_04D9&PID_1400&MI_00\7&27783262&0&0000               : HID Keyboard Device
HID\VID_04D9&PID_1400&MI_01&COL01\7&1E031C7&0&0000          : HID-compliant mouse
HID\VID_04D9&PID_1400&MI_01&COL02\7&1E031C7&0&0001          : HID-compliant consumer control device
HID\VID_04D9&PID_1400&MI_01&COL03\7&1E031C7&0&0002          : HID-compliant device
12 matching device(s) found.

============
ACPI Devices
============
ACPI\AWY0001\2&DABA3FF&0                                    : AMD AwayMode
ACPI\FIXEDBUTTON\2&DABA3FF&0                                : ACPI Fixed Feature Button
ACPI\GENUINEINTEL_-_X86_FAMILY_6_MODEL_14\_0                : Genuine Intel(R) CPU           T2300  @ 1.66GHz
ACPI\GENUINEINTEL_-_X86_FAMILY_6_MODEL_14\_1                : Genuine Intel(R) CPU           T2300  @ 1.66GHz
ACPI\INT0800\4&2703397C&0                                   : Intel(R) 82802 Firmware Hub Device
ACPI\PNP0000\4&2703397C&0                                   : Programmable interrupt controller
ACPI\PNP0100\4&2703397C&0                                   : System timer
ACPI\PNP0200\4&2703397C&0                                   : Direct memory access controller
ACPI\PNP0800\4&2703397C&0                                   : System speaker
ACPI\PNP0A08\1                                              : PCI bus
ACPI\PNP0B00\4&2703397C&0                                   : System CMOS/real time clock
ACPI\PNP0C01\2&DABA3FF&0                                    : System board
ACPI\PNP0C02\1                                              : Motherboard resources
ACPI\PNP0C02\2                                              : Motherboard resources
ACPI\PNP0C02\4                                              : Motherboard resources
ACPI\PNP0C04\4&2703397C&0                                   : Numeric data processor
ACPI\PNP0C0C\2&DABA3FF&0                                    : ACPI Power Button
ACPI_HAL\PNP0C08\0                                          : Microsoft ACPI-Compliant System
ROOT\ACPI_HAL\0000                                          : ACPI Multiprocessor PC
19 matching device(s) found.

Re: [Rel] DP Compaq Presario C710ED SATA Driver

As i suspected you did slipstream the mass storage text mode drivers from the DriverPacks mass storage pack.

so its not the 3rd party DriverPack that is finding your HDD in text mode, however the PnP driver does get picked up from your pack.
That is the way i would expect that it would and should work.

If you really were trying to cut down on your size (not that 28 meg is huge or anything) you could edit the mass storage pack and eliminate the un-needed drivers. i posted a link for that above.

there is a more detailed answer here...
FAQ = http://forum.driverpacks.net/viewtopic.php?id=2461

thanks so much for the feedback. It's always nice to see how things work out for our members / users.

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

Re: [Rel] DP Compaq Presario C710ED SATA Driver

Hi OverFlow,

Well i surtently did not select the mass storage pack. But yes i gues to that the text mode info is used from the mass storage pack. It does write a lot of info (i think from the official mass storage pack to txtsetup.sif and dosnet.inf) I try and test tomorrow with the official packs removed. Sow the will only be my 3rd party driverpacks

Last week i alsow fond somone els that did make two 3dr party driverpacks for mass storage. You can find the links here:
http://www.doitrightconsulting.net/foru … &t=339 (you will need to be registrated user to see the post i think.) They where made by RogueSpear. A well known name.

I have a look into costomising the official masstorage dp comming time.

Greets,
UtCollector

Last edited by utcollector (2008-03-10 11:32:11)

Re: [Rel] DP Compaq Presario C710ED SATA Driver

yes you did it says so in your base.ini

last pack

; you should only add this section if you've set [Settings]\DriverPacks to "select"
[SelectDriverPacks]
DP_Chipset    = "no"
DP_CPU        = "no"
DP_Graphics_A    = "no"
DP_Graphics_B    = "no"
DP_Graphics_C    = "no"
DP_LAN        = "no"
DP_MassStorage    = "no"
DP_Sound_A    = "no"
DP_Sound_B    = "no"
DP_WLAN        = "no"
DPs_3rd_party    = "yes"
DP_MassStorage_textmode = "yes"

and your log confirms it

2008-03-09 14:59:08 : <SLIP> Slipstreamed DriverPack MassStorage text mode driver files.


taken right out of your post...

You slipstreamed the entire official driverpacks MassStorage 8.02.1 pack
which is the ONLY way to get it to work...
(without manually editing files in the I386 folder)

third party packs only work for plug and play not for finding a hard drive for installing windows
I am one of the authors of the base program so i am not making stuff up because i am bored.
you can't get text mode support from a 3rd party DriverPack PERIOD!
if you doubt me still - try removing the mass storage pack from the base\driverpacks\ folder and then do a test install.
then feel free to apologize to me.

and yes i use autoimage and am a member over there

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.